Streams Standard

1. Introduction

This section is non-normative.

Large swathes of the web platform are built on streaming data: that is, data that is created, processed, and consumed in an incremental fashion, without ever reading all of it into memory. The Streams Standard provides a common set of APIs for creating and interfacing with such streaming data, embodied in readable streams, writable streams, and transform streams.

These APIs have been designed to efficiently map to low-level I/O primitives, including specializations for byte streams where appropriate. They allow easy composition of multiple streams into pipe chains, or can be used directly via readers and writers. Finally, they are designed to automatically provide backpressure and queuing.

This standard provides the base stream primitives which other parts of the web platform can use to expose their streaming data. For example, [FETCH] exposes Response bodies as ReadableStream instances. More generally, the platform is full of streaming abstractions waiting to be expressed as streams: multimedia streams, file streams, inter-global communication, and more benefit from being able to process data incrementally instead of buffering it all into memory and processing it in one go. By providing the foundation for these streams to be exposed to developers, the Streams Standard enables use cases like:

Video effects: piping a readable video stream through a transform stream that applies effects in real time.
Decompression: piping a file stream through a transform stream that selectively decompresses files from a .tgz archive, turning them into img elements as the user scrolls through an image gallery.
Image decoding: piping an HTTP response stream through a transform stream that decodes bytes into bitmap data, and then through another transform that translates bitmaps into PNGs. If installed inside the fetch hook of a service worker, this would allow developers to transparently polyfill new image formats. [SERVICE-WORKERS]

Web developers can also use the APIs described here to create their own streams, with the same APIs as those provided by the platform. Other developers can then transparently compose platform-provided streams with those supplied by libraries. In this way, the APIs described here provide unifying abstraction for all streams, encouraging an ecosystem to grow around these shared and composable interfaces.

2. Model

A chunk is a single piece of data that is written to or read from a stream. It can be of any type; streams can even contain chunks of different types. A chunk will often not be the most atomic unit of data for a given stream; for example a byte stream might contain chunks consisting of 16 KiB Uint8Arrays, instead of single bytes.

2.1. Readable streams

A readable stream represents a source of data, from which you can read. In other words, data comes out of a readable stream. Concretely, a readable stream is an instance of the ReadableStream class.

Although a readable stream can be created with arbitrary behavior, most readable streams wrap a lower-level I/O source, called the underlying source. There are two types of underlying source: push sources and pull sources.

Push sources push data at you, whether or not you are listening for it. They may also provide a mechanism for pausing and resuming the flow of data. An example push source is a TCP socket, where data is constantly being pushed from the OS level, at a rate that can be controlled by changing the TCP window size.

Pull sources require you to request data from them. The data may be available synchronously, e.g. if it is held by the operating system’s in-memory buffers, or asynchronously, e.g. if it has to be read from disk. An example pull source is a file handle, where you seek to specific locations and read specific amounts.

Readable streams are designed to wrap both types of sources behind a single, unified interface. For web developer–created streams, the implementation details of a source are provided by an object with certain methods and properties that is passed to the ReadableStream() constructor.

Chunks are enqueued into the stream by the stream’s underlying source. They can then be read one at a time via the stream’s public interface, in particular by using a readable stream reader acquired using the stream’s getReader() method.

Code that reads from a readable stream using its public interface is known as a consumer.

Consumers also have the ability to cancel a readable stream, using its cancel() method. This indicates that the consumer has lost interest in the stream, and will immediately close the stream, throw away any queued chunks, and execute any cancellation mechanism of the underlying source.

Consumers can also tee a readable stream using its tee() method. This will lock the stream, making it no longer directly usable; however, it will create two new streams, called branches, which can be consumed independently.

For streams representing bytes, an extended version of the readable stream is provided to handle bytes efficiently, in particular by minimizing copies. The underlying source for such a readable stream is called an underlying byte source. A readable stream whose underlying source is an underlying byte source is sometimes called a readable byte stream. Consumers of a readable byte stream can acquire a BYOB reader using the stream’s getReader() method.

2.2. Writable streams

A writable stream represents a destination for data, into which you can write. In other words, data goes in to a writable stream. Concretely, a writable stream is an instance of the WritableStream class.

Analogously to readable streams, most writable streams wrap a lower-level I/O sink, called the underlying sink. Writable streams work to abstract away some of the complexity of the underlying sink, by queuing subsequent writes and only delivering them to the underlying sink one by one.

Chunks are written to the stream via its public interface, and are passed one at a time to the stream’s underlying sink. For web developer-created streams, the implementation details of the sink are provided by an object with certain methods that is passed to the WritableStream() constructor.

Code that writes into a writable stream using its public interface is known as a producer.

Producers also have the ability to abort a writable stream, using its abort() method. This indicates that the producer believes something has gone wrong, and that future writes should be discontinued. It puts the stream in an errored state, even without a signal from the underlying sink, and it discards all writes in the stream’s internal queue.

2.3. Transform streams

A transform stream consists of a pair of streams: a writable stream, known as its writable side, and a readable stream, known as its readable side. In a manner specific to the transform stream in question, writes to the writable side result in new data being made available for reading from the readable side.

Concretely, any object with a writable property and a readable property can serve as a transform stream. However, the standard TransformStream class makes it much easier to create such a pair that is properly entangled. It wraps a transformer, which defines algorithms for the specific transformation to be performed. For web developer–created streams, the implementation details of a transformer are provided by an object with certain methods and properties that is passed to the TransformStream() constructor. Other specifications might use the GenericTransformStream mixin to create classes with the same writable/readable property pair but other custom APIs layered on top.

An identity transform stream is a type of transform stream which forwards all chunks written to its writable side to its readable side, without any changes. This can be useful in a variety of scenarios. By default, the TransformStream constructor will create an identity transform stream, when no transform() method is present on the transformer object.

Some examples of potential transform streams include:

A GZIP compressor, to which uncompressed bytes are written and from which compressed bytes are read;
A video decoder, to which encoded bytes are written and from which uncompressed video frames are read;
A text decoder, to which bytes are written and from which strings are read;
A CSV-to-JSON converter, to which strings representing lines of a CSV file are written and from which corresponding JavaScript objects are read.

2.4. Pipe chains and backpressure

Streams are primarily used by piping them to each other. A readable stream can be piped directly to a writable stream, using its pipeTo() method, or it can be piped through one or more transform streams first, using its pipeThrough() method.

A set of streams piped together in this way is referred to as a pipe chain. In a pipe chain, the original source is the underlying source of the first readable stream in the chain; the ultimate sink is the underlying sink of the final writable stream in the chain.

Once a pipe chain is constructed, it will propagate signals regarding how fast chunks should flow through it. If any step in the chain cannot yet accept chunks, it propagates a signal backwards through the pipe chain, until eventually the original source is told to stop producing chunks so fast. This process of normalizing flow from the original source according to how fast the chain can process chunks is called backpressure.

Concretely, the original source is given the controller.desiredSize (or byteController.desiredSize) value, and can then adjust its rate of data flow accordingly. This value is derived from the writer.desiredSize corresponding to the ultimate sink, which gets updated as the ultimate sink finishes writing chunks. The pipeTo() method used to construct the chain automatically ensures this information propagates back through the pipe chain.

When teeing a readable stream, the backpressure signals from its two branches will aggregate, such that if neither branch is read from, a backpressure signal will be sent to the underlying source of the original stream.

Piping locks the readable and writable streams, preventing them from being manipulated for the duration of the pipe operation. This allows the implementation to perform important optimizations, such as directly shuttling data from the underlying source to the underlying sink while bypassing many of the intermediate queues.

2.5. Internal queues and queuing strategies

Both readable and writable streams maintain internal queues, which they use for similar purposes. In the case of a readable stream, the internal queue contains chunks that have been enqueued by the underlying source, but not yet read by the consumer. In the case of a writable stream, the internal queue contains chunks which have been written to the stream by the producer, but not yet processed and acknowledged by the underlying sink.

A queuing strategy is an object that determines how a stream should signal backpressure based on the state of its internal queue. The queuing strategy assigns a size to each chunk, and compares the total size of all chunks in the queue to a specified number, known as the high water mark. The resulting difference, high water mark minus total size, is used to determine the desired size to fill the stream’s queue.

For readable streams, an underlying source can use this desired size as a backpressure signal, slowing down chunk generation so as to try to keep the desired size above or at zero. For writable streams, a producer can behave similarly, avoiding writes that would cause the desired size to go negative.

Concretely, a queuing strategy for web developer–created streams is given by any JavaScript object with a highWaterMark property. For byte streams the highWaterMark always has units of bytes. For other streams the default unit is chunks, but a size() function can be included in the strategy object which returns the size for a given chunk. This permits the highWaterMark to be specified in arbitrary floating-point units.

A simple example of a queuing strategy would be one that assigns a size of one to each chunk, and has a high water mark of three. This would mean that up to three chunks could be enqueued in a readable stream, or three chunks written to a writable stream, before the streams are considered to be applying backpressure.

In JavaScript, such a strategy could be written manually as { highWaterMark: 3, size() { return 1; }}, or using the built-in CountQueuingStrategy class, as new CountQueuingStrategy({ highWaterMark: 3 }).

2.6. Locking

A readable stream reader, or simply reader, is an object that allows direct reading of chunks from a readable stream. Without a reader, a consumer can only perform high-level operations on the readable stream: canceling the stream, or piping the readable stream to a writable stream. A reader is acquired via the stream’s getReader() method.

A readable byte stream has the ability to vend two types of readers: default readers and BYOB readers. BYOB ("bring your own buffer") readers allow reading into a developer-supplied buffer, thus minimizing copies. A non-byte readable stream can only vend default readers. Default readers are instances of the ReadableStreamDefaultReader class, while BYOB readers are instances of ReadableStreamBYOBReader.

Similarly, a writable stream writer, or simply writer, is an object that allows direct writing of chunks to a writable stream. Without a writer, a producer can only perform the high-level operations of aborting the stream or piping a readable stream to the writable stream. Writers are represented by the WritableStreamDefaultWriter class.

Under the covers, these high-level operations actually use a reader or writer themselves.

A given readable or writable stream only has at most one reader or writer at a time. We say in this case the stream is locked, and that the reader or writer is active. This state can be determined using the readableStream.locked or writableStream.locked properties.

A reader or writer also has the capability to release its lock, which makes it no longer active, and allows further readers or writers to be acquired. This is done via the defaultReader.releaseLock(), byobReader.releaseLock(), or writer.releaseLock() method, as appropriate.

3. Conventions

This specification depends on the Infra Standard. [INFRA]

This specification uses the abstract operation concept from the JavaScript specification for its internal algorithms. This includes treating their return values as completion records, and the use of ! and ? prefixes for unwrapping those completion records. [ECMASCRIPT]

This specification also uses the internal slot concept and notation from the JavaScript specification. (Although, the internal slots are on Web IDL platform objects instead of on JavaScript objects.)

The reasons for the usage of these foreign JavaScript specification conventions are largely historical. We urge you to avoid following our example when writing your own web specifications.

In this specification, all numbers are represented as double-precision 64-bit IEEE 754 floating point values (like the JavaScript Number type or Web IDL unrestricted double type), and all arithmetic operations performed on them must be done in the standard way for such values. This is particularly important for the data structure described in § 8.1 Queue-with-sizes. [IEEE-754]

4. Readable streams

4.1. Using readable streams

The simplest way to consume a readable stream is to simply pipe it to a writable stream. This ensures that backpressure is respected, and any errors (either writing or reading) are propagated through the chain:

readableStream.pipeTo(writableStream)
  .then(() => console.log("All data successfully written!"))
  .catch(e => console.error("Something went wrong!", e));

If you simply want to be alerted of each new chunk from a readable stream, you can pipe it to a new writable stream that you custom-create for that purpose:

readableStream.pipeTo(new WritableStream({
  write(chunk) {
    console.log("Chunk received", chunk);
  },
  close() {
    console.log("All data successfully read!");
  },
  abort(e) {
    console.error("Something went wrong!", e);
  }
}));

By returning promises from your write() implementation, you can signal backpressure to the readable stream.

Although readable streams will usually be used by piping them to a writable stream, you can also read them directly by acquiring a reader and using its read() method to get successive chunks. For example, this code logs the next chunk in the stream, if available:

const reader = readableStream.getReader();

reader.read().then(
  ({ value, done }) => {
    if (done) {
      console.log("The stream was already closed!");
    } else {
      console.log(value);
    }
  },
  e => console.error("The stream became errored and cannot be read from!", e)
);

This more manual method of reading a stream is mainly useful for library authors building new high-level operations on streams, beyond the provided ones of piping and teeing.

The above example showed using the readable stream’s default reader. If the stream is a readable byte stream, you can also acquire a BYOB reader for it, which allows more precise control over buffer allocation in order to avoid copies. For example, this code reads the first 1024 bytes from the stream into a single memory buffer:

const reader = readableStream.getReader({ mode: "byob" });

let startingAB = new ArrayBuffer(1024);
const buffer = await readInto(startingAB);
console.log("The first 1024 bytes: ", buffer);

async function readInto(buffer) {
  let offset = 0;

  while (offset < buffer.byteLength) {
    const { value: view, done } =
     await reader.read(new Uint8Array(buffer, offset, buffer.byteLength - offset));
    buffer = view.buffer;
    if (done) {
      break;
    }
    offset += view.byteLength;
  }

  return buffer;
}

An important thing to note here is that the final buffer value is different from the startingAB, but it (and all intermediate buffers) shares the same backing memory allocation. At each step, the buffer is transferred to a new ArrayBuffer object. The view is destructured from the return value of reading a new Uint8Array, with that ArrayBuffer object as its buffer property, the offset that bytes were written to as its byteOffset property, and the number of bytes that were written as its byteLength property.

Note that this example is mostly educational. For practical purposes, the min option of read() provides an easier and more direct way to read an exact number of bytes:

const reader = readableStream.getReader({ mode: "byob" });
const { value: view, done } = await reader.read(new Uint8Array(1024), { min: 1024 });
console.log("The first 1024 bytes: ", view);

4.2. The `ReadableStream` class

The ReadableStream class is a concrete instance of the general readable stream concept. It is adaptable to any chunk type, and maintains an internal queue to keep track of data supplied by the underlying source but not yet read by any consumer.

4.2.1. Interface definition

The Web IDL definition for the ReadableStream class is given as follows:

[Exposed=*, Transferable]
interface ReadableStream {
  constructor(optional object underlyingSource, optional QueuingStrategy strategy = {});

  static ReadableStream from(any asyncIterable);

  readonly attribute boolean locked;

  Promise<undefined> cancel(optional any reason);
  ReadableStreamReader getReader(optional ReadableStreamGetReaderOptions options = {});
  ReadableStream pipeThrough(ReadableWritablePair transform, optional StreamPipeOptions options = {});
  Promise<undefined> pipeTo(WritableStream destination, optional StreamPipeOptions options = {});
  sequence<ReadableStream> tee();

  async_iterable<any>(optional ReadableStreamIteratorOptions options = {});
};

typedef (ReadableStreamDefaultReader or ReadableStreamBYOBReader) ReadableStreamReader;

enum ReadableStreamReaderMode { "byob" };

dictionary ReadableStreamGetReaderOptions {
  ReadableStreamReaderMode mode;
};

dictionary ReadableStreamIteratorOptions {
  boolean preventCancel = false;
};

dictionary ReadableWritablePair {
  required ReadableStream readable;
  required WritableStream writable;
};

dictionary StreamPipeOptions {
  boolean preventClose = false;
  boolean preventAbort = false;
  boolean preventCancel = false;
  AbortSignal signal;
};

4.2.2. Internal slots

Instances of ReadableStream are created with the internal slots described in the following table:

Internal Slot	Description (non-normative)
[[controller]]	A `ReadableStreamDefaultController` or `ReadableByteStreamController` created with the ability to control the state and queue of this stream
[[Detached]]	A boolean flag set to true when the stream is transferred
[[disturbed]]	A boolean flag set to true when the stream has been read from or canceled
[[reader]]	A `ReadableStreamDefaultReader` or `ReadableStreamBYOBReader` instance, if the stream is locked to a reader, or undefined if it is not
[[state]]	A string containing the stream’s current state, used internally; one of "`readable`", "`closed`", or "`errored`"
[[storedError]]	A value indicating how the stream failed, to be given as a failure reason or exception when trying to operate on an errored stream

4.2.3. The underlying source API

The ReadableStream() constructor accepts as its first argument a JavaScript object representing the underlying source. Such objects can contain any of the following properties:

dictionary UnderlyingSource {
  UnderlyingSourceStartCallback start;
  UnderlyingSourcePullCallback pull;
  UnderlyingSourceCancelCallback cancel;
  ReadableStreamType type;
  [EnforceRange] unsigned long long autoAllocateChunkSize;
};

typedef (ReadableStreamDefaultController or ReadableByteStreamController) ReadableStreamController;

callback UnderlyingSourceStartCallback = any (ReadableStreamController controller);
callback UnderlyingSourcePullCallback = Promise<undefined> (ReadableStreamController controller);
callback UnderlyingSourceCancelCallback = Promise<undefined> (optional any reason);

enum ReadableStreamType { "bytes" };

start(controller), of type UnderlyingSourceStartCallback

A function that is called immediately during creation of the ReadableStream.

Typically this is used to adapt a push source by setting up relevant event listeners, as in the example of § 10.1 A readable stream with an underlying push source (no backpressure support), or to acquire access to a pull source, as in § 10.4 A readable stream with an underlying pull source.

If this setup process is asynchronous, it can return a promise to signal success or failure; a rejected promise will error the stream. Any thrown exceptions will be re-thrown by the ReadableStream() constructor.

pull(controller), of type UnderlyingSourcePullCallback

A function that is called whenever the stream’s internal queue of chunks becomes not full, i.e. whenever the queue’s desired size becomes positive. Generally, it will be called repeatedly until the queue reaches its high water mark (i.e. until the desired size becomes non-positive).

For push sources, this can be used to resume a paused flow, as in § 10.2 A readable stream with an underlying push source and backpressure support. For pull sources, it is used to acquire new chunks to enqueue into the stream, as in § 10.4 A readable stream with an underlying pull source.

This function will not be called until start() successfully completes. Additionally, it will only be called repeatedly if it enqueues at least one chunk or fulfills a BYOB request; a no-op pull() implementation will not be continually called.

If the function returns a promise, then it will not be called again until that promise fulfills. (If the promise rejects, the stream will become errored.) This is mainly used in the case of pull sources, where the promise returned represents the process of acquiring a new chunk. Throwing an exception is treated the same as returning a rejected promise.

cancel(reason), of type UnderlyingSourceCancelCallback

A function that is called whenever the consumer cancels the stream, via stream.cancel() or reader.cancel(). It takes as its argument the same value as was passed to those methods by the consumer.

Readable streams can additionally be canceled under certain conditions during piping; see the definition of the pipeTo() method for more details.

For all streams, this is generally used to release access to the underlying resource; see for example § 10.1 A readable stream with an underlying push source (no backpressure support).

If the shutdown process is asynchronous, it can return a promise to signal success or failure; the result will be communicated via the return value of the cancel() method that was called. Throwing an exception is treated the same as returning a rejected promise.

Even if the cancelation process fails, the stream will still close; it will not be put into an errored state. This is because a failure in the cancelation process doesn’t matter to the consumer’s view of the stream, once they’ve expressed disinterest in it by canceling. The failure is only communicated to the immediate caller of the corresponding method.

This is different from the behavior of the close and abort options of a WritableStream’s underlying sink, which upon failure put the corresponding WritableStream into an errored state. Those correspond to specific actions the producer is requesting and, if those actions fail, they indicate something more persistently wrong.

type (byte streams only), of type ReadableStreamType

Can be set to "bytes" to signal that the constructed ReadableStream is a readable byte stream. This ensures that the resulting ReadableStream will successfully be able to vend BYOB readers via its getReader() method. It also affects the controller argument passed to the start() and pull() methods; see below.

For an example of how to set up a readable byte stream, including using the different controller interface, see § 10.3 A readable byte stream with an underlying push source (no backpressure support).

Setting any value other than "bytes" or undefined will cause the ReadableStream() constructor to throw an exception.

autoAllocateChunkSize (byte streams only), of type unsigned long long

Can be set to a positive integer to cause the implementation to automatically allocate buffers for the underlying source code to write into. In this case, when a consumer is using a default reader, the stream implementation will automatically allocate an ArrayBuffer of the given size, so that controller.byobRequest is always present, as if the consumer was using a BYOB reader.

This is generally used to cut down on the amount of code needed to handle consumers that use default readers, as can be seen by comparing § 10.3 A readable byte stream with an underlying push source (no backpressure support) without auto-allocation to § 10.5 A readable byte stream with an underlying pull source with auto-allocation.

The type of the controller argument passed to the start() and pull() methods depends on the value of the type option. If type is set to undefined (including via omission), then controller will be a ReadableStreamDefaultController. If it’s set to "bytes", then controller will be a ReadableByteStreamController.

4.2.4. Constructor, methods, and properties

stream = new ReadableStream(underlyingSource[, strategy])

Creates a new ReadableStream wrapping the provided underlying source. See § 4.2.3 The underlying source API for more details on the underlyingSource argument.

The strategy argument represents the stream’s queuing strategy, as described in § 7.1 The queuing strategy API. If it is not provided, the default behavior will be the same as a CountQueuingStrategy with a high water mark of 1.

stream = ReadableStream.from(asyncIterable)

Creates a new ReadableStream wrapping the provided iterable or async iterable.

This can be used to adapt various kinds of objects into a readable stream, such as an array, an async generator, or a Node.js readable stream.

isLocked = stream.locked

Returns whether or not the readable stream is locked to a reader.

await stream.cancel([ reason ])

Cancels the stream, signaling a loss of interest in the stream by a consumer. The supplied reason argument will be given to the underlying source’s cancel() method, which might or might not use it.

The returned promise will fulfill if the stream shuts down successfully, or reject if the underlying source signaled that there was an error doing so. Additionally, it will reject with a TypeError (without attempting to cancel the stream) if the stream is currently locked.

reader = stream.getReader()

Creates a ReadableStreamDefaultReader and locks the stream to the new reader. While the stream is locked, no other reader can be acquired until this one is released.

This functionality is especially useful for creating abstractions that desire the ability to consume a stream in its entirety. By getting a reader for the stream, you can ensure nobody else can interleave reads with yours or cancel the stream, which would interfere with your abstraction.

reader = stream.getReader({ mode: "byob" })

Creates a ReadableStreamBYOBReader and locks the stream to the new reader.

This call behaves the same way as the no-argument variant, except that it only works on readable byte streams, i.e. streams which were constructed specifically with the ability to handle "bring your own buffer" reading. The returned BYOB reader provides the ability to directly read individual chunks from the stream via its read() method, into developer-supplied buffers, allowing more precise control over allocation.

readable = stream.pipeThrough({ writable, readable }[, { preventClose, preventAbort, preventCancel, signal }])

Provides a convenient, chainable way of piping this readable stream through a transform stream (or any other { writable, readable } pair). It simply pipes the stream into the writable side of the supplied pair, and returns the readable side for further use.

Piping a stream will lock it for the duration of the pipe, preventing any other consumer from acquiring a reader.

await stream.pipeTo(destination[, { preventClose, preventAbort, preventCancel, signal }])

Pipes this readable stream to a given writable stream destination. The way in which the piping process behaves under various error conditions can be customized with a number of passed options. It returns a promise that fulfills when the piping process completes successfully, or rejects if any errors were encountered.

Piping a stream will lock it for the duration of the pipe, preventing any other consumer from acquiring a reader.

Errors and closures of the source and destination streams propagate as follows:

An error in this source readable stream will abort destination, unless preventAbort is truthy. The returned promise will be rejected with the source’s error, or with any error that occurs during aborting the destination.
An error in destination will cancel this source readable stream, unless preventCancel is truthy. The returned promise will be rejected with the destination’s error, or with any error that occurs during canceling the source.
When this source readable stream closes, destination will be closed, unless preventClose is truthy. The returned promise will be fulfilled once this process completes, unless an error is encountered while closing the destination, in which case it will be rejected with that error.
If destination starts out closed or closing, this source readable stream will be canceled, unless preventCancel is true. The returned promise will be rejected with an error indicating piping to a closed stream failed, or with any error that occurs during canceling the source.

The signal option can be set to an AbortSignal to allow aborting an ongoing pipe operation via the corresponding AbortController. In this case, this source readable stream will be canceled, and destination aborted, unless the respective options preventCancel or preventAbort are set.

[branch1, branch2] = stream.tee()

Tees this readable stream, returning a two-element array containing the two resulting branches as new ReadableStream instances.

Teeing a stream will lock it, preventing any other consumer from acquiring a reader. To cancel the stream, cancel both of the resulting branches; a composite cancellation reason will then be propagated to the stream’s underlying source.

If this stream is a readable byte stream, then each branch will receive its own copy of each chunk. If not, then the chunks seen in each branch will be the same object. If the chunks are not immutable, this could allow interference between the two branches.

The new ReadableStream(underlyingSource, strategy) constructor steps are:

If underlyingSource is missing, set it to null.
Let underlyingSourceDict be underlyingSource, converted to an IDL value of type UnderlyingSource.

We cannot declare the underlyingSource argument as having the UnderlyingSource type directly, because doing so would lose the reference to the original object. We need to retain the object so we can invoke the various methods on it.
Perform ! InitializeReadableStream(this).
If underlyingSourceDict["type"] is "bytes":
1. If strategy["size"] exists, throw a RangeError exception.
2. Let highWaterMark be ? ExtractHighWaterMark(strategy, 0).
3. Perform ? SetUpReadableByteStreamControllerFromUnderlyingSource(this, underlyingSource, underlyingSourceDict, highWaterMark).
Otherwise,
1. Assert: underlyingSourceDict["type"] does not exist.
2. Let sizeAlgorithm be ! ExtractSizeAlgorithm(strategy).
3. Let highWaterMark be ? ExtractHighWaterMark(strategy, 1).
4. Perform ? SetUpReadableStreamDefaultControllerFromUnderlyingSource(this, underlyingSource, underlyingSourceDict, highWaterMark, sizeAlgorithm).

The static from(asyncIterable) method steps are:

Return ? ReadableStreamFromIterable(asyncIterable).

The locked getter steps are:

Return ! IsReadableStreamLocked(this).

The cancel(reason) method steps are:

If ! IsReadableStreamLocked(this) is true, return a promise rejected with a TypeError exception.
Return ! ReadableStreamCancel(this, reason).

The getReader(options) method steps are:

If options["mode"] does not exist, return ? AcquireReadableStreamDefaultReader(this).
Assert: options["mode"] is "byob".
Return ? AcquireReadableStreamBYOBReader(this).

An example of an abstraction that might benefit from using a reader is a function like the following, which is designed to read an entire readable stream into memory as an array of chunks.

function readAllChunks(readableStream) {
  const reader = readableStream.getReader();
  const chunks = [];

  return pump();

  function pump() {
    return reader.read().then(({ value, done }) => {
      if (done) {
        return chunks;
      }

      chunks.push(value);
      return pump();
    });
  }
}

Note how the first thing it does is obtain a reader, and from then on it uses the reader exclusively. This ensures that no other consumer can interfere with the stream, either by reading chunks or by canceling the stream.

The pipeThrough(transform, options) method steps are:

If ! IsReadableStreamLocked(this) is true, throw a TypeError exception.
If ! IsWritableStreamLocked(transform["writable"]) is true, throw a TypeError exception.
Let signal be options["signal"] if it exists, or undefined otherwise.
Let promise be ! ReadableStreamPipeTo(this, transform["writable"], options["preventClose"], options["preventAbort"], options["preventCancel"], signal).
Set promise.[[PromiseIsHandled]] to true.
Return transform["readable"].

A typical example of constructing pipe chain using pipeThrough(transform, options) would look like

httpResponseBody
  .pipeThrough(decompressorTransform)
  .pipeThrough(ignoreNonImageFilesTransform)
  .pipeTo(mediaGallery);

The pipeTo(destination, options) method steps are:

If ! IsReadableStreamLocked(this) is true, return a promise rejected with a TypeError exception.
If ! IsWritableStreamLocked(destination) is true, return a promise rejected with a TypeError exception.
Let signal be options["signal"] if it exists, or undefined otherwise.
Return ! ReadableStreamPipeTo(this, destination, options["preventClose"], options["preventAbort"], options["preventCancel"], signal).

An ongoing pipe operation can be stopped using an AbortSignal, as follows:

const controller = new AbortController();
readable.pipeTo(writable, { signal: controller.signal });

// ... some time later ...
controller.abort();

(The above omits error handling for the promise returned by pipeTo(). Additionally, the impact of the preventAbort and preventCancel options what happens when piping is stopped are worth considering.)

The above technique can be used to switch the ReadableStream being piped, while writing into the same WritableStream:

const controller = new AbortController();
const pipePromise = readable1.pipeTo(writable, { preventAbort: true, signal: controller.signal });

// ... some time later ...
controller.abort();

// Wait for the pipe to complete before starting a new one:
try {
 await pipePromise;
} catch (e) {
 // Swallow "AbortError" DOMExceptions as expected, but rethrow any unexpected failures.
 if (e.name !== "AbortError") {
  throw e;
 }
}

// Start the new pipe!
readable2.pipeTo(writable);

The tee() method steps are:

Return ? ReadableStreamTee(this, false).

Teeing a stream is most useful when you wish to let two independent consumers read from the stream in parallel, perhaps even at different speeds. For example, given a writable stream cacheEntry representing an on-disk file, and another writable stream httpRequestBody representing an upload to a remote server, you could pipe the same readable stream to both destinations at once:

const [forLocal, forRemote] = readableStream.tee();

Promise.all([
  forLocal.pipeTo(cacheEntry),
  forRemote.pipeTo(httpRequestBody)
])
.then(() => console.log("Saved the stream to the cache and also uploaded it!"))
.catch(e => console.error("Either caching or uploading failed: ", e));

4.2.5. Asynchronous iteration

for await (const chunk of stream) { ... }

for await (const chunk of stream.values({ preventCancel: true })) { ... }

Asynchronously iterates over the chunks in the stream’s internal queue.

Asynchronously iterating over the stream will lock it, preventing any other consumer from acquiring a reader. The lock will be released if the async iterator’s return() method is called, e.g. by breaking out of the loop.

By default, calling the async iterator’s return() method will also cancel the stream. To prevent this, use the stream’s values() method, passing true for the preventCancel option.

The asynchronous iterator initialization steps for a ReadableStream, given stream, iterator, and args, are:

Let reader be ? AcquireReadableStreamDefaultReader(stream).
Set iterator’s reader to reader.
Let preventCancel be args[0]["preventCancel"].
Set iterator’s prevent cancel to preventCancel.

The get the next iteration result steps for a ReadableStream, given stream and iterator, are:

Let reader be iterator’s reader.
Assert: reader.[[stream]] is not undefined.
Let promise be a new promise.
Let readRequest be a new read request with the following items:
chunk steps, given chunk
1. Resolve promise with chunk.
close steps
1. Perform ! ReadableStreamDefaultReaderRelease(reader).
2. Resolve promise with end of iteration.
error steps, given e
1. Perform ! ReadableStreamDefaultReaderRelease(reader).
2. Reject promise with e.
Perform ! ReadableStreamDefaultReaderRead(this, readRequest).
Return promise.

The asynchronous iterator return steps for a ReadableStream, given stream, iterator, and arg, are:

Let reader be iterator’s reader.
Assert: reader.[[stream]] is not undefined.
Assert: reader.[[readRequests]] is empty, as the async iterator machinery guarantees that any previous calls to next() have settled before this is called.
If iterator’s prevent cancel is false:
1. Let result be ! ReadableStreamReaderGenericCancel(reader, arg).
2. Perform ! ReadableStreamDefaultReaderRelease(reader).
3. Return result.
Perform ! ReadableStreamDefaultReaderRelease(reader).
Return a promise resolved with undefined.

4.2.6. Transfer via `postMessage()`

destination.postMessage(rs, { transfer: [rs] });

Sends a ReadableStream to another frame, window, or worker.

The transferred stream can be used exactly like the original. The original will become locked and no longer directly usable.

ReadableStream objects are transferable objects. Their transfer steps, given value and dataHolder, are:

If ! IsReadableStreamLocked(value) is true, throw a "DataCloneError" DOMException.
Let port1 be a new MessagePort in the current Realm.
Let port2 be a new MessagePort in the current Realm.
Entangle port1 and port2.
Let writable be a new WritableStream in the current Realm.
Perform ! SetUpCrossRealmTransformWritable(writable, port1).
Let promise be ! ReadableStreamPipeTo(value, writable, false, false, false).
Set promise.[[PromiseIsHandled]] to true.
Set dataHolder.[[port]] to ! StructuredSerializeWithTransfer(port2, « port2 »).

Their transfer-receiving steps, given dataHolder and value, are:

Let deserializedRecord be ! StructuredDeserializeWithTransfer(dataHolder.[[port]], the current Realm).
Let port be deserializedRecord.[[Deserialized]].
Perform ! SetUpCrossRealmTransformReadable(value, port).

4.3. The `ReadableStreamGenericReader` mixin

The ReadableStreamGenericReader mixin defines common internal slots, getters and methods that are shared between ReadableStreamDefaultReader and ReadableStreamBYOBReader objects.

4.3.1. Mixin definition

The Web IDL definition for the ReadableStreamGenericReader mixin is given as follows:

interface mixin ReadableStreamGenericReader {
  readonly attribute Promise<undefined> closed;

  Promise<undefined> cancel(optional any reason);
};

4.3.2. Internal slots

Instances of classes including the ReadableStreamGenericReader mixin are created with the internal slots described in the following table:

Internal Slot	Description (non-normative)
[[closedPromise]]	A promise returned by the reader’s `closed` getter
[[stream]]	A `ReadableStream` instance that owns this reader

4.3.3. Methods and properties

The closed getter steps are:

Return this.[[closedPromise]].

The cancel(reason) method steps are:

If this.[[stream]] is undefined, return a promise rejected with a TypeError exception.
Return ! ReadableStreamReaderGenericCancel(this, reason).

4.4. The `ReadableStreamDefaultReader` class

The ReadableStreamDefaultReader class represents a default reader designed to be vended by a ReadableStream instance.

4.4.1. Interface definition

The Web IDL definition for the ReadableStreamDefaultReader class is given as follows:

[Exposed=*]
interface ReadableStreamDefaultReader {
  constructor(ReadableStream stream);

  Promise<ReadableStreamReadResult> read();
  undefined releaseLock();
};
ReadableStreamDefaultReader includes ReadableStreamGenericReader;

dictionary ReadableStreamReadResult {
  any value;
  boolean done;
};

4.4.2. Internal slots

Instances of ReadableStreamDefaultReader are created with the internal slots defined by ReadableStreamGenericReader, and those described in the following table:

Internal Slot	Description (non-normative)
[[readRequests]]	A list of read requests, used when a consumer requests chunks sooner than they are available

A read request is a struct containing three algorithms to perform in reaction to filling the readable stream’s internal queue or changing its state. It has the following items:

chunk steps: An algorithm taking a chunk, called when a chunk is available for reading
close steps: An algorithm taking no arguments, called when no chunks are available because the stream is closed
error steps: An algorithm taking a JavaScript value, called when no chunks are available because the stream is errored

4.4.3. Constructor, methods, and properties

reader = new ReadableStreamDefaultReader(stream)

This is equivalent to calling stream.getReader().

await reader.closed

Returns a promise that will be fulfilled when the stream becomes closed, or rejected if the stream ever errors or the reader’s lock is released before the stream finishes closing.

await reader.cancel([ reason ])

If the reader is active, behaves the same as stream.cancel(reason).

{ value, done } = await reader.read()

Returns a promise that allows access to the next chunk from the stream’s internal queue, if available.

If the chunk does become available, the promise will be fulfilled with an object of the form { value: theChunk, done: false }.
If the stream becomes closed, the promise will be fulfilled with an object of the form { value: undefined, done: true }.
If the stream becomes errored, the promise will be rejected with the relevant error.

If reading a chunk causes the queue to become empty, more data will be pulled from the underlying source.

reader.releaseLock()

Releases the reader’s lock on the corresponding stream. After the lock is released, the reader is no longer active. If the associated stream is errored when the lock is released, the reader will appear errored in the same way from now on; otherwise, the reader will appear closed.

If the reader’s lock is released while it still has pending read requests, then the promises returned by the reader’s read() method are immediately rejected with a TypeError. Any unread chunks remain in the stream’s internal queue and can be read later by acquiring a new reader.

The new ReadableStreamDefaultReader(stream) constructor steps are:

Perform ? SetUpReadableStreamDefaultReader(this, stream).

The read() method steps are:

If this.[[stream]] is undefined, return a promise rejected with a TypeError exception.
Let promise be a new promise.
Let readRequest be a new read request with the following items:
chunk steps, given chunk
1. Resolve promise with «[ "value" → chunk, "done" → false ]».
close steps
1. Resolve promise with «[ "value" → undefined, "done" → true ]».
error steps, given e
1. Reject promise with e.
Perform ! ReadableStreamDefaultReaderRead(this, readRequest).
Return promise.

The releaseLock() method steps are:

If this.[[stream]] is undefined, return.
Perform ! ReadableStreamDefaultReaderRelease(this).

4.5. The `ReadableStreamBYOBReader` class

The ReadableStreamBYOBReader class represents a BYOB reader designed to be vended by a ReadableStream instance.

4.5.1. Interface definition

The Web IDL definition for the ReadableStreamBYOBReader class is given as follows:

[Exposed=*]
interface ReadableStreamBYOBReader {
  constructor(ReadableStream stream);

  Promise<ReadableStreamReadResult> read(ArrayBufferView view, optional ReadableStreamBYOBReaderReadOptions options = {});
  undefined releaseLock();
};
ReadableStreamBYOBReader includes ReadableStreamGenericReader;

dictionary ReadableStreamBYOBReaderReadOptions {
  [EnforceRange] unsigned long long min = 1;
};

4.5.2. Internal slots

Instances of ReadableStreamBYOBReader are created with the internal slots defined by ReadableStreamGenericReader, and those described in the following table:

Internal Slot	Description (non-normative)
[[readIntoRequests]]	A list of read-into requests, used when a consumer requests chunks sooner than they are available

A read-into request is a struct containing three algorithms to perform in reaction to filling the readable byte stream’s internal queue or changing its state. It has the following items:

chunk steps: An algorithm taking a chunk, called when a chunk is available for reading
close steps: An algorithm taking a chunk or undefined, called when no chunks are available because the stream is closed
error steps: An algorithm taking a JavaScript value, called when no chunks are available because the stream is errored

The close steps take a chunk so that it can return the backing memory to the caller if possible. For example, byobReader.read(chunk) will fulfill with { value: newViewOnSameMemory, done: true } for closed streams. If the stream is canceled, the backing memory is discarded and byobReader.read(chunk) fulfills with the more traditional { value: undefined, done: true } instead.

4.5.3. Constructor, methods, and properties

reader = new ReadableStreamBYOBReader(stream)

This is equivalent to calling stream.getReader({ mode: "byob" }).

await reader.closed

Returns a promise that will be fulfilled when the stream becomes closed, or rejected if the stream ever errors or the reader’s lock is released before the stream finishes closing.

await reader.cancel([ reason ])

If the reader is active, behaves the same stream.cancel(reason).

{ value, done } = await reader.read(view[, { min }])

Attempts to read bytes into view, and returns a promise resolved with the result:

If the chunk does become available, the promise will be fulfilled with an object of the form { value: newView, done: false }. In this case, view will be detached and no longer usable, but newView will be a new view (of the same type) onto the same backing memory region, with the chunk’s data written into it.
If the stream becomes closed, the promise will be fulfilled with an object of the form { value: newView, done: true }. In this case, view will be detached and no longer usable, but newView will be a new view (of the same type) onto the same backing memory region, with no modifications, to ensure the memory is returned to the caller.
If the reader is canceled, the promise will be fulfilled with an object of the form { value: undefined, done: true }. In this case, the backing memory region of view is discarded and not returned to the caller.
If the stream becomes errored, the promise will be rejected with the relevant error.

If reading a chunk causes the queue to become empty, more data will be pulled from the underlying source.

If min is given, then the promise will only be fulfilled as soon as the given minimum number of elements are available. Here, the "number of elements" is given by newView’s length (for typed arrays) or newView’s byteLength (for DataViews). If the stream becomes closed, then the promise is fulfilled with the remaining elements in the stream, which might be fewer than the initially requested amount. If not given, then the promise resolves when at least one element is available.

reader.releaseLock()

The new ReadableStreamBYOBReader(stream) constructor steps are:

Perform ? SetUpReadableStreamBYOBReader(this, stream).

The read(view, options) method steps are:

If view.[[ByteLength]] is 0, return a promise rejected with a TypeError exception.
If view.[[ViewedArrayBuffer]].[[ByteLength]] is 0, return a promise rejected with a TypeError exception.
If ! IsDetachedBuffer(view.[[ViewedArrayBuffer]]) is true, return a promise rejected with a TypeError exception.
If options["min"] is 0, return a promise rejected with a TypeError exception.
If view has a [[TypedArrayName]] internal slot,
1. If options["min"] > view.[[ArrayLength]], return a promise rejected with a RangeError exception.
Otherwise (i.e., it is a DataView),
1. If options["min"] > view.[[ByteLength]], return a promise rejected with a RangeError exception.
If this.[[stream]] is undefined, return a promise rejected with a TypeError exception.
Let promise be a new promise.
Let readIntoRequest be a new read-into request with the following items:
chunk steps, given chunk
1. Resolve promise with «[ "value" → chunk, "done" → false ]».
close steps, given chunk
1. Resolve promise with «[ "value" → chunk, "done" → true ]».
error steps, given e
1. Reject promise with e.
Perform ! ReadableStreamBYOBReaderRead(this, view, options["min"], readIntoRequest).
Return promise.

The releaseLock() method steps are:

If this.[[stream]] is undefined, return.
Perform ! ReadableStreamBYOBReaderRelease(this).

4.6. The `ReadableStreamDefaultController` class

The ReadableStreamDefaultController class has methods that allow control of a ReadableStream’s state and internal queue. When constructing a ReadableStream that is not a readable byte stream, the underlying source is given a corresponding ReadableStreamDefaultController instance to manipulate.

4.6.1. Interface definition

The Web IDL definition for the ReadableStreamDefaultController class is given as follows:

[Exposed=*]
interface ReadableStreamDefaultController {
  readonly attribute unrestricted double? desiredSize;

  undefined close();
  undefined enqueue(optional any chunk);
  undefined error(optional any e);
};

4.6.2. Internal slots

Instances of ReadableStreamDefaultController are created with the internal slots described in the following table:

Internal Slot	Description (non-normative)
[[cancelAlgorithm]]	A promise-returning algorithm, taking one argument (the cancel reason), which communicates a requested cancelation to the underlying source
[[closeRequested]]	A boolean flag indicating whether the stream has been closed by its underlying source, but still has chunks in its internal queue that have not yet been read
[[pullAgain]]	A boolean flag set to true if the stream’s mechanisms requested a call to the underlying source’s pull algorithm to pull more data, but the pull could not yet be done since a previous call is still executing
[[pullAlgorithm]]	A promise-returning algorithm that pulls data from the underlying source
[[pulling]]	A boolean flag set to true while the underlying source’s pull algorithm is executing and the returned promise has not yet fulfilled, used to prevent reentrant calls
[[queue]]	A list representing the stream’s internal queue of chunks
[[queueTotalSize]]	The total size of all the chunks stored in [[queue]] (see § 8.1 Queue-with-sizes)
[[started]]	A boolean flag indicating whether the underlying source has finished starting
[[strategyHWM]]	A number supplied to the constructor as part of the stream’s queuing strategy, indicating the point at which the stream will apply backpressure to its underlying source
[[strategySizeAlgorithm]]	An algorithm to calculate the size of enqueued chunks, as part of the stream’s queuing strategy
[[stream]]	The `ReadableStream` instance controlled

4.6.3. Methods and properties

desiredSize = controller.desiredSize: Returns the desired size to fill the controlled stream’s internal queue. It can be negative, if the queue is over-full. An underlying source ought to use this information to determine when and how to apply backpressure.
controller.close(): Closes the controlled readable stream. Consumers will still be able to read any previously-enqueued chunks from the stream, but once those are read, the stream will become closed.
controller.enqueue(chunk): Enqueues the given chunk chunk in the controlled readable stream.
controller.error(e): Errors the controlled readable stream, making all future interactions with it fail with the given error e.

The desiredSize getter steps are:

Return ! ReadableStreamDefaultControllerGetDesiredSize(this).

The close() method steps are:

If ! ReadableStreamDefaultControllerCanCloseOrEnqueue(this) is false, throw a TypeError exception.
Perform ! ReadableStreamDefaultControllerClose(this).

The enqueue(chunk) method steps are:

If ! ReadableStreamDefaultControllerCanCloseOrEnqueue(this) is false, throw a TypeError exception.
Perform ? ReadableStreamDefaultControllerEnqueue(this, chunk).

The error(e) method steps are:

Perform ! ReadableStreamDefaultControllerError(this, e).

4.6.4. Internal methods

The following are internal methods implemented by each ReadableStreamDefaultController instance. The readable stream implementation will polymorphically call to either these, or to their counterparts for BYOB controllers, as discussed in § 4.9.2 Interfacing with controllers.

[[CancelSteps]](reason) implements the [[CancelSteps]] contract. It performs the following steps:

Perform ! ResetQueue(this).
Let result be the result of performing this.[[cancelAlgorithm]], passing reason.
Perform ! ReadableStreamDefaultControllerClearAlgorithms(this).
Return result.

[[PullSteps]](readRequest) implements the [[PullSteps]] contract. It performs the following steps:

Let stream be this.[[stream]].
If this.[[queue]] is not empty,
1. Let chunk be ! DequeueValue(this).
2. If this.[[closeRequested]] is true and this.[[queue]] is empty,
  1. Perform ! ReadableStreamDefaultControllerClearAlgorithms(this).
  2. Perform ! ReadableStreamClose(stream).
3. Otherwise, perform ! ReadableStreamDefaultControllerCallPullIfNeeded(this).
4. Perform readRequest’s chunk steps, given chunk.
Otherwise,
1. Perform ! ReadableStreamAddReadRequest(stream, readRequest).
2. Perform ! ReadableStreamDefaultControllerCallPullIfNeeded(this).

[[ReleaseSteps]]() implements the [[ReleaseSteps]] contract. It performs the following steps:

Return.

4.7. The `ReadableByteStreamController` class

The ReadableByteStreamController class has methods that allow control of a ReadableStream’s state and internal queue. When constructing a ReadableStream that is a readable byte stream, the underlying source is given a corresponding ReadableByteStreamController instance to manipulate.

4.7.1. Interface definition

The Web IDL definition for the ReadableByteStreamController class is given as follows:

[Exposed=*]
interface ReadableByteStreamController {
  readonly attribute ReadableStreamBYOBRequest? byobRequest;
  readonly attribute unrestricted double? desiredSize;

  undefined close();
  undefined enqueue(ArrayBufferView chunk);
  undefined error(optional any e);
};

4.7.2. Internal slots

Instances of ReadableByteStreamController are created with the internal slots described in the following table:

Internal Slot	Description (non-normative)
[[autoAllocateChunkSize]]	A positive integer, when the automatic buffer allocation feature is enabled. In that case, this value specifies the size of buffer to allocate. It is undefined otherwise.
[[byobRequest]]	A `ReadableStreamBYOBRequest` instance representing the current BYOB pull request, or null if there are no pending requests
[[cancelAlgorithm]]	A promise-returning algorithm, taking one argument (the cancel reason), which communicates a requested cancelation to the underlying byte source
[[closeRequested]]	A boolean flag indicating whether the stream has been closed by its underlying byte source, but still has chunks in its internal queue that have not yet been read
[[pullAgain]]	A boolean flag set to true if the stream’s mechanisms requested a call to the underlying byte source’s pull algorithm to pull more data, but the pull could not yet be done since a previous call is still executing
[[pullAlgorithm]]	A promise-returning algorithm that pulls data from the underlying byte source
[[pulling]]	A boolean flag set to true while the underlying byte source’s pull algorithm is executing and the returned promise has not yet fulfilled, used to prevent reentrant calls
[[pendingPullIntos]]	A list of pull-into descriptors
[[queue]]	A list of readable byte stream queue entries representing the stream’s internal queue of chunks
[[queueTotalSize]]	The total size, in bytes, of all the chunks stored in [[queue]] (see § 8.1 Queue-with-sizes)
[[started]]	A boolean flag indicating whether the underlying byte source has finished starting
[[strategyHWM]]	A number supplied to the constructor as part of the stream’s queuing strategy, indicating the point at which the stream will apply backpressure to its underlying byte source
[[stream]]	The `ReadableStream` instance controlled

Although ReadableByteStreamController instances have [[queue]] and [[queueTotalSize]] slots, we do not use most of the abstract operations in § 8.1 Queue-with-sizes on them, as the way in which we manipulate this queue is rather different than the others in the spec. Instead, we update the two slots together manually.

This might be cleaned up in a future spec refactoring.

A readable byte stream queue entry is a struct encapsulating the important aspects of a chunk for the specific case of readable byte streams. It has the following items:

buffer: An ArrayBuffer, which will be a transferred version of the one originally supplied by the underlying byte source
byte offset: A nonnegative integer number giving the byte offset derived from the view originally supplied by the underlying byte source
byte length: A nonnegative integer number giving the byte length derived from the view originally supplied by the underlying byte source

A pull-into descriptor is a struct used to represent pending BYOB pull requests. It has the following items:

buffer: An ArrayBuffer
buffer byte length: A positive integer representing the initial byte length of buffer
byte offset: A nonnegative integer byte offset into the buffer where the underlying byte source will start writing
byte length: A positive integer number of bytes which can be written into the buffer
bytes filled: A nonnegative integer number of bytes that have been written into the buffer so far
minimum fill: A positive integer representing the minimum number of bytes that must be written into the buffer before the associated read() request may be fulfilled. By default, this equals the element size.
element size: A positive integer representing the number of bytes that can be written into the buffer at a time, using views of the type described by the view constructor
view constructor: A typed array constructor or %DataView%, which will be used for constructing a view with which to write into the buffer
reader type: Either "default" or "byob", indicating what type of readable stream reader initiated this request, or "none" if the initiating reader was released

4.7.3. Methods and properties

byobRequest = controller.byobRequest: Returns the current BYOB pull request, or null if there isn’t one.
desiredSize = controller.desiredSize: Returns the desired size to fill the controlled stream’s internal queue. It can be negative, if the queue is over-full. An underlying byte source ought to use this information to determine when and how to apply backpressure.
controller.close(): Closes the controlled readable stream. Consumers will still be able to read any previously-enqueued chunks from the stream, but once those are read, the stream will become closed.
controller.enqueue(chunk): Enqueues the given chunk chunk in the controlled readable stream. The chunk has to be an ArrayBufferView instance, or else a TypeError will be thrown.
controller.error(e): Errors the controlled readable stream, making all future interactions with it fail with the given error e.

The byobRequest getter steps are:

Return ! ReadableByteStreamControllerGetBYOBRequest(this).

The desiredSize getter steps are:

Return ! ReadableByteStreamControllerGetDesiredSize(this).

The close() method steps are:

If this.[[closeRequested]] is true, throw a TypeError exception.
If this.[[stream]].[[state]] is not "readable", throw a TypeError exception.
Perform ? ReadableByteStreamControllerClose(this).

The enqueue(chunk) method steps are:

If chunk.[[ByteLength]] is 0, throw a TypeError exception.
If chunk.[[ViewedArrayBuffer]].[[ByteLength]] is 0, throw a TypeError exception.
If this.[[closeRequested]] is true, throw a TypeError exception.
If this.[[stream]].[[state]] is not "readable", throw a TypeError exception.
Return ? ReadableByteStreamControllerEnqueue(this, chunk).

The error(e) method steps are:

Perform ! ReadableByteStreamControllerError(this, e).

4.7.4. Internal methods

The following are internal methods implemented by each ReadableByteStreamController instance. The readable stream implementation will polymorphically call to either these, or to their counterparts for default controllers, as discussed in § 4.9.2 Interfacing with controllers.

[[CancelSteps]](reason) implements the [[CancelSteps]] contract. It performs the following steps:

Perform ! ReadableByteStreamControllerClearPendingPullIntos(this).
Perform ! ResetQueue(this).
Let result be the result of performing this.[[cancelAlgorithm]], passing in reason.
Perform ! ReadableByteStreamControllerClearAlgorithms(this).
Return result.

[[PullSteps]](readRequest) implements the [[PullSteps]] contract. It performs the following steps:

Let stream be this.[[stream]].
Assert: ! ReadableStreamHasDefaultReader(stream) is true.
If this.[[queueTotalSize]] > 0,
1. Assert: ! ReadableStreamGetNumReadRequests(stream) is 0.
2. Perform ! ReadableByteStreamControllerFillReadRequestFromQueue(this, readRequest).
3. Return.
Let autoAllocateChunkSize be this.[[autoAllocateChunkSize]].
If autoAllocateChunkSize is not undefined,
1. Let buffer be Construct(%ArrayBuffer%, « autoAllocateChunkSize »).
2. If buffer is an abrupt completion,
  1. Perform readRequest’s error steps, given buffer.[[Value]].
  2. Return.
3. Let pullIntoDescriptor be a new pull-into descriptor with
  
  buffer
  buffer.[[Value]]
  buffer byte length
  autoAllocateChunkSize
  byte offset
  0
  byte length
  autoAllocateChunkSize
  bytes filled
  0
  minimum fill
  1
  element size
  1
  view constructor
  %Uint8Array%
  reader type
  "default"
4. Append pullIntoDescriptor to this.[[pendingPullIntos]].
Perform ! ReadableStreamAddReadRequest(stream, readRequest).
Perform ! ReadableByteStreamControllerCallPullIfNeeded(this).

[[ReleaseSteps]]() implements the [[ReleaseSteps]] contract. It performs the following steps:

If this.[[pendingPullIntos]] is not empty,
1. Let firstPendingPullInto be this.[[pendingPullIntos]][0].
2. Set firstPendingPullInto’s reader type to "none".
3. Set this.[[pendingPullIntos]] to the list « firstPendingPullInto ».

4.8. The `ReadableStreamBYOBRequest` class

The ReadableStreamBYOBRequest class represents a pull-into request in a ReadableByteStreamController.

4.8.1. Interface definition

The Web IDL definition for the ReadableStreamBYOBRequest class is given as follows:

[Exposed=*]
interface ReadableStreamBYOBRequest {
  readonly attribute ArrayBufferView? view;

  undefined respond([EnforceRange] unsigned long long bytesWritten);
  undefined respondWithNewView(ArrayBufferView view);
};

4.8.2. Internal slots

Instances of ReadableStreamBYOBRequest are created with the internal slots described in the following table:

Internal Slot	Description (non-normative)
[[controller]]	The parent `ReadableByteStreamController` instance
[[view]]	A typed array representing the destination region to which the controller can write generated data, or null after the BYOB request has been invalidated.

4.8.3. Methods and properties

view = byobRequest.view

Returns the view for writing in to, or null if the BYOB request has already been responded to.

byobRequest.respond(bytesWritten)

Indicates to the associated readable byte stream that bytesWritten bytes were written into view, causing the result be surfaced to the consumer.

After this method is called, view will be transferred and no longer modifiable.

byobRequest.respondWithNewView(view)

Indicates to the associated readable byte stream that instead of writing into view, the underlying byte source is providing a new ArrayBufferView, which will be given to the consumer of the readable byte stream.

The new view has to be a view onto the same backing memory region as view, i.e. its buffer has to equal (or be a transferred version of) view’s buffer. Its byteOffset has to equal view’s byteOffset, and its byteLength (representing the number of bytes written) has to be less than or equal to that of view.

After this method is called, view will be transferred and no longer modifiable.

The view getter steps are:

Return this.[[view]].

The respond(bytesWritten) method steps are:

If this.[[controller]] is undefined, throw a TypeError exception.
If ! IsDetachedBuffer(this.[[view]].[[ArrayBuffer]]) is true, throw a TypeError exception.
Assert: this.[[view]].[[ByteLength]] > 0.
Assert: this.[[view]].[[ViewedArrayBuffer]].[[ByteLength]] > 0.
Perform ? ReadableByteStreamControllerRespond(this.[[controller]], bytesWritten).

The respondWithNewView(view) method steps are:

If this.[[controller]] is undefined, throw a TypeError exception.
If ! IsDetachedBuffer(view.[[ViewedArrayBuffer]]) is true, throw a TypeError exception.
Return ? ReadableByteStreamControllerRespondWithNewView(this.[[controller]], view).

4.9. Abstract operations

4.9.1. Working with readable streams

The following abstract operations operate on ReadableStream instances at a higher level.

AcquireReadableStreamBYOBReader(stream) performs the following steps:

Let reader be a new ReadableStreamBYOBReader.
Perform ? SetUpReadableStreamBYOBReader(reader, stream).
Return reader.

AcquireReadableStreamDefaultReader(stream) performs the following steps:

Let reader be a new ReadableStreamDefaultReader.
Perform ? SetUpReadableStreamDefaultReader(reader, stream).
Return reader.

CreateReadableStream(startAlgorithm, pullAlgorithm, cancelAlgorithm[, highWaterMark, [, sizeAlgorithm]]) performs the following steps:

If highWaterMark was not passed, set it to 1.
If sizeAlgorithm was not passed, set it to an algorithm that returns 1.
Assert: ! IsNonNegativeNumber(highWaterMark) is true.
Let stream be a new ReadableStream.
Perform ! InitializeReadableStream(stream).
Let controller be a new ReadableStreamDefaultController.
Perform ? SetUpReadableStreamDefaultController(stream, controller, startAlgorithm, pullAlgorithm, cancelAlgorithm, highWaterMark, sizeAlgorithm).
Return stream.

This abstract operation will throw an exception if and only if the supplied startAlgorithm throws.

CreateReadableByteStream(startAlgorithm, pullAlgorithm, cancelAlgorithm) performs the following steps:

Let stream be a new ReadableStream.
Perform ! InitializeReadableStream(stream).
Let controller be a new ReadableByteStreamController.
Perform ? SetUpReadableByteStreamController(stream, controller, startAlgorithm, pullAlgorithm, cancelAlgorithm, 0, undefined).
Return stream.

This abstract operation will throw an exception if and only if the supplied startAlgorithm throws.

InitializeReadableStream(stream) performs the following steps:

Set stream.[[state]] to "readable".
Set stream.[[reader]] and stream.[[storedError]] to undefined.
Set stream.[[disturbed]] to false.

IsReadableStreamLocked(stream) performs the following steps:

If stream.[[reader]] is undefined, return false.
Return true.

ReadableStreamFromIterable(asyncIterable) performs the following steps:

Let stream be undefined.
Let iteratorRecord be ? GetIterator(asyncIterable, async).
Let startAlgorithm be an algorithm that returns undefined.
Let pullAlgorithm be the following steps:
1. Let nextResult be IteratorNext(iteratorRecord).
2. If nextResult is an abrupt completion, return a promise rejected with nextResult.[[Value]].
3. Let nextPromise be a promise resolved with nextResult.[[Value]].
4. Return the result of reacting to nextPromise with the following fulfillment steps, given iterResult:
  1. If iterResult is not an Object, throw a TypeError.
  2. Let done be ? IteratorComplete(iterResult).
  3. If done is true:
    1. Perform ! ReadableStreamDefaultControllerClose(stream.[[controller]]).
  4. Otherwise:
    1. Let value be ? IteratorValue(iterResult).
    2. Perform ! ReadableStreamDefaultControllerEnqueue(stream.[[controller]], value).
Let cancelAlgorithm be the following steps, given reason:
1. Let iterator be iteratorRecord.[[Iterator]].
2. Let returnMethod be GetMethod(iterator, "return").
3. If returnMethod is an abrupt completion, return a promise rejected with returnMethod.[[Value]].
4. If returnMethod.[[Value]] is undefined, return a promise resolved with undefined.
5. Let returnResult be Call(returnMethod.[[Value]], iterator, « reason »).
6. If returnResult is an abrupt completion, return a promise rejected with returnResult.[[Value]].
7. Let returnPromise be a promise resolved with returnResult.[[Value]].
8. Return the result of reacting to returnPromise with the following fulfillment steps, given iterResult:
  1. If iterResult is not an Object, throw a TypeError.
  2. Return undefined.
Set stream to ! CreateReadableStream(startAlgorithm, pullAlgorithm, cancelAlgorithm, 0).
Return stream.

ReadableStreamPipeTo(source, dest, preventClose, preventAbort, preventCancel[, signal]) performs the following steps:

Assert: source implements ReadableStream.
Assert: dest implements WritableStream.
Assert: preventClose, preventAbort, and preventCancel are all booleans.
If signal was not given, let signal be undefined.
Assert: either signal is undefined, or signal implements AbortSignal.
Assert: ! IsReadableStreamLocked(source) is false.
Assert: ! IsWritableStreamLocked(dest) is false.
If source.[[controller]] implements ReadableByteStreamController, let reader be either ! AcquireReadableStreamBYOBReader(source) or ! AcquireReadableStreamDefaultReader(source), at the user agent’s discretion.
Otherwise, let reader be ! AcquireReadableStreamDefaultReader(source).
Let writer be ! AcquireWritableStreamDefaultWriter(dest).
Set source.[[disturbed]] to true.
Let shuttingDown be false.
Let promise be a new promise.
If signal is not undefined,
1. Let abortAlgorithm be the following steps:
  1. Let error be signal’s abort reason.
  2. Let actions be an empty ordered set.
  3. If preventAbort is false, append the following action to actions:
    1. If dest.[[state]] is "writable", return ! WritableStreamAbort(dest, error).
    2. Otherwise, return a promise resolved with undefined.
  4. If preventCancel is false, append the following action action to actions:
    1. If source.[[state]] is "readable", return ! ReadableStreamCancel(source, error).
    2. Otherwise, return a promise resolved with undefined.
  5. Shutdown with an action consisting of getting a promise to wait for all of the actions in actions, and with error.
2. If signal is aborted, perform abortAlgorithm and return promise.
3. Add abortAlgorithm to signal.
In parallel but not really; see #905, using reader and writer, read all chunks from source and write them to dest. Due to the locking provided by the reader and writer, the exact manner in which this happens is not observable to author code, and so there is flexibility in how this is done. The following constraints apply regardless of the exact algorithm used:
- Public API must not be used: while reading or writing, or performing any of the operations below, the JavaScript-modifiable reader, writer, and stream APIs (i.e. methods on the appropriate prototypes) must not be used. Instead, the streams must be manipulated directly.
- Backpressure must be enforced:
  - While WritableStreamDefaultWriterGetDesiredSize(writer) is ≤ 0 or is null, the user agent must not read from reader.
  - If reader is a BYOB reader, WritableStreamDefaultWriterGetDesiredSize(writer) should be used as a basis to determine the size of the chunks read from reader.
    
    It’s frequently inefficient to read chunks that are too small or too large. Other information might be factored in to determine the optimal chunk size.
  - Reads or writes should not be delayed for reasons other than these backpressure signals.
    
    An implementation that waits for each write to successfully complete before proceeding to the next read/write operation violates this recommendation. In doing so, such an implementation makes the internal queue of dest useless, as it ensures dest always contains at most one queued chunk.
- Shutdown must stop activity: if shuttingDown becomes true, the user agent must not initiate further reads from reader, and must only perform writes of already-read chunks, as described below. In particular, the user agent must check the below conditions before performing any reads or writes, since they might lead to immediate shutdown.
- Error and close states must be propagated: the following conditions must be applied in order.
  1. Errors must be propagated forward: if source.[[state]] is or becomes "errored", then
    1. If preventAbort is false, shutdown with an action of ! WritableStreamAbort(dest, source.[[storedError]]) and with source.[[storedError]].
    2. Otherwise, shutdown with source.[[storedError]].
  2. Errors must be propagated backward: if dest.[[state]] is or becomes "errored", then
    1. If preventCancel is false, shutdown with an action of ! ReadableStreamCancel(source, dest.[[storedError]]) and with dest.[[storedError]].
    2. Otherwise, shutdown with dest.[[storedError]].
  3. Closing must be propagated forward: if source.[[state]] is or becomes "closed", then
    1. If preventClose is false, shutdown with an action of ! WritableStreamDefaultWriterCloseWithErrorPropagation(writer).
    2. Otherwise, shutdown.
  4. Closing must be propagated backward: if ! WritableStreamCloseQueuedOrInFlight(dest) is true or dest.[[state]] is "closed", then
    1. Assert: no chunks have been read or written.
    2. Let destClosed be a new TypeError.
    3. If preventCancel is false, shutdown with an action of ! ReadableStreamCancel(source, destClosed) and with destClosed.
    4. Otherwise, shutdown with destClosed.
- Shutdown with an action: if any of the above requirements ask to shutdown with an action action, optionally with an error originalError, then:
  1. If shuttingDown is true, abort these substeps.
  2. Set shuttingDown to true.
  3. If dest.[[state]] is "writable" and ! WritableStreamCloseQueuedOrInFlight(dest) is false,
    1. If any chunks have been read but not yet written, write them to dest.
    2. Wait until every chunk that has been read has been written (i.e. the corresponding promises have settled).
  4. Let p be the result of performing action.
  5. Upon fulfillment of p, finalize, passing along originalError if it was given.
  6. Upon rejection of p with reason newError, finalize with newError.
- Shutdown: if any of the above requirements or steps ask to shutdown, optionally with an error error, then:
  1. If shuttingDown is true, abort these substeps.
  2. Set shuttingDown to true.
  3. If dest.[[state]] is "writable" and ! WritableStreamCloseQueuedOrInFlight(dest) is false,
    1. If any chunks have been read but not yet written, write them to dest.
    2. Wait until every chunk that has been read has been written (i.e. the corresponding promises have settled).
  4. Finalize, passing along error if it was given.
- Finalize: both forms of shutdown will eventually ask to finalize, optionally with an error error, which means to perform the following steps:
  1. Perform ! WritableStreamDefaultWriterRelease(writer).
  2. If reader implements ReadableStreamBYOBReader, perform ! ReadableStreamBYOBReaderRelease(reader).
  3. Otherwise, perform ! ReadableStreamDefaultReaderRelease(reader).
  4. If signal is not undefined, remove abortAlgorithm from signal.
  5. If error was given, reject promise with error.
  6. Otherwise, resolve promise with undefined.
Return promise.

Various abstract operations performed here include object creation (often of promises), which usually would require specifying a realm for the created object. However, because of the locking, none of these objects can be observed by author code. As such, the realm used to create them does not matter.

ReadableStreamTee(stream, cloneForBranch2) will tee a given readable stream.

The second argument, cloneForBranch2, governs whether or not the data from the original stream will be cloned (using HTML’s serializable objects framework) before appearing in the second of the returned branches. This is useful for scenarios where both branches are to be consumed in such a way that they might otherwise interfere with each other, such as by transferring their chunks. However, it does introduce a noticeable asymmetry between the two branches, and limits the possible chunks to serializable ones. [HTML]

If stream is a readable byte stream, then cloneForBranch2 is ignored and chunks are cloned unconditionally.

In this standard ReadableStreamTee is always called with cloneForBranch2 set to false; other specifications pass true via the tee wrapper algorithm.

It performs the following steps:

Assert: stream implements ReadableStream.
Assert: cloneForBranch2 is a boolean.
If stream.[[controller]] implements ReadableByteStreamController, return ? ReadableByteStreamTee(stream).
Return ? ReadableStreamDefaultTee(stream, cloneForBranch2).

ReadableStreamDefaultTee(stream, cloneForBranch2) performs the following steps:

Assert: stream implements ReadableStream.
Assert: cloneForBranch2 is a boolean.
Let reader be ? AcquireReadableStreamDefaultReader(stream).
Let reading be false.
Let readAgain be false.
Let canceled1 be false.
Let canceled2 be false.
Let reason1 be undefined.
Let reason2 be undefined.
Let branch1 be undefined.
Let branch2 be undefined.
Let cancelPromise be a new promise.
Let pullAlgorithm be the following steps:
1. If reading is true,
  1. Set readAgain to true.
  2. Return a promise resolved with undefined.
2. Set reading to true.
3. Let readRequest be a read request with the following items:
  chunk steps, given chunk
  1. Queue a microtask to perform the following steps:
    
    Set readAgain to false.
    
    Let chunk1 and chunk2 be chunk.
    
    If canceled2 is false and cloneForBranch2 is true,
    
    Let cloneResult be StructuredClone(chunk2).
    
    If cloneResult is an abrupt completion,
    
    Perform ! ReadableStreamDefaultControllerError(branch1.[[controller]], cloneResult.[[Value]]).
    
    Perform ! ReadableStreamDefaultControllerError(branch2.[[controller]], cloneResult.[[Value]]).
    
    Resolve cancelPromise with ! ReadableStreamCancel(stream, cloneResult.[[Value]]).
    
    Return.
    
    Otherwise, set chunk2 to cloneResult.[[Value]].
    
    If canceled1 is false, perform ! ReadableStreamDefaultControllerEnqueue(branch1.[[controller]], chunk1).
    
    If canceled2 is false, perform ! ReadableStreamDefaultControllerEnqueue(branch2.[[controller]], chunk2).
    
    Set reading to false.
    
    If readAgain is true, perform pullAlgorithm.
  The microtask delay here is necessary because it takes at least a microtask to detect errors, when we use reader.[[closedPromise]] below. We want errors in stream to error both branches immediately, so we cannot let successful synchronously-available reads happen ahead of asynchronously-available errors.
  close steps
  1. Set reading to false.
  2. If canceled1 is false, perform ! ReadableStreamDefaultControllerClose(branch1.[[controller]]).
  3. If canceled2 is false, perform ! ReadableStreamDefaultControllerClose(branch2.[[controller]]).
  4. If canceled1 is false or canceled2 is false, resolve cancelPromise with undefined.
  error steps
  1. Set reading to false.
4. Perform ! ReadableStreamDefaultReaderRead(reader, readRequest).
5. Return a promise resolved with undefined.
Let cancel1Algorithm be the following steps, taking a reason argument:
1. Set canceled1 to true.
2. Set reason1 to reason.
3. If canceled2 is true,
  1. Let compositeReason be ! CreateArrayFromList(« reason1, reason2 »).
  2. Let cancelResult be ! ReadableStreamCancel(stream, compositeReason).
  3. Resolve cancelPromise with cancelResult.
4. Return cancelPromise.
Let cancel2Algorithm be the following steps, taking a reason argument:
1. Set canceled2 to true.
2. Set reason2 to reason.
3. If canceled1 is true,
  1. Let compositeReason be ! CreateArrayFromList(« reason1, reason2 »).
  2. Let cancelResult be ! ReadableStreamCancel(stream, compositeReason).
  3. Resolve cancelPromise with cancelResult.
4. Return cancelPromise.
Let startAlgorithm be an algorithm that returns undefined.
Set branch1 to ! CreateReadableStream(startAlgorithm, pullAlgorithm, cancel1Algorithm).
Set branch2 to ! CreateReadableStream(startAlgorithm, pullAlgorithm, cancel2Algorithm).
Upon rejection of reader.[[closedPromise]] with reason r,
1. Perform ! ReadableStreamDefaultControllerError(branch1.[[controller]], r).
2. Perform ! ReadableStreamDefaultControllerError(branch2.[[controller]], r).
3. If canceled1 is false or canceled2 is false, resolve cancelPromise with undefined.
Return « branch1, branch2 ».

ReadableByteStreamTee(stream) performs the following steps:

Assert: stream implements ReadableStream.
Assert: stream.[[controller]] implements ReadableByteStreamController.
Let reader be ? AcquireReadableStreamDefaultReader(stream).
Let reading be false.
Let readAgainForBranch1 be false.
Let readAgainForBranch2 be false.
Let canceled1 be false.
Let canceled2 be false.
Let reason1 be undefined.
Let reason2 be undefined.
Let branch1 be undefined.
Let branch2 be undefined.
Let cancelPromise be a new promise.
Let forwardReaderError be the following steps, taking a thisReader argument:
1. Upon rejection of thisReader.[[closedPromise]] with reason r,
  1. If thisReader is not reader, return.
  2. Perform ! ReadableByteStreamControllerError(branch1.[[controller]], r).
  3. Perform ! ReadableByteStreamControllerError(branch2.[[controller]], r).
  4. If canceled1 is false or canceled2 is false, resolve cancelPromise with undefined.
Let pullWithDefaultReader be the following steps:
1. If reader implements ReadableStreamBYOBReader,
  1. Assert: reader.[[readIntoRequests]] is empty.
  2. Perform ! ReadableStreamBYOBReaderRelease(reader).
  3. Set reader to ! AcquireReadableStreamDefaultReader(stream).
  4. Perform forwardReaderError, given reader.
2. Let readRequest be a read request with the following items:
  chunk steps, given chunk
  1. Queue a microtask to perform the following steps:
    
    Set readAgainForBranch1 to false.
    
    Set readAgainForBranch2 to false.
    
    Let chunk1 and chunk2 be chunk.
    
    If canceled1 is false and canceled2 is false,
    
    Let cloneResult be CloneAsUint8Array(chunk).
    
    If cloneResult is an abrupt completion,
    
    Perform ! ReadableByteStreamControllerError(branch1.[[controller]], cloneResult.[[Value]]).
    
    Perform ! ReadableByteStreamControllerError(branch2.[[controller]], cloneResult.[[Value]]).
    
    Resolve cancelPromise with ! ReadableStreamCancel(stream, cloneResult.[[Value]]).
    
    Return.
    
    Otherwise, set chunk2 to cloneResult.[[Value]].
    
    If canceled1 is false, perform ! ReadableByteStreamControllerEnqueue(branch1.[[controller]], chunk1).
    
    If canceled2 is false, perform ! ReadableByteStreamControllerEnqueue(branch2.[[controller]], chunk2).
    
    Set reading to false.
    
    If readAgainForBranch1 is true, perform pull1Algorithm.
    
    Otherwise, if readAgainForBranch2 is true, perform pull2Algorithm.
  The microtask delay here is necessary because it takes at least a microtask to detect errors, when we use reader.[[closedPromise]] below. We want errors in stream to error both branches immediately, so we cannot let successful synchronously-available reads happen ahead of asynchronously-available errors.
  close steps
  1. Set reading to false.
  2. If canceled1 is false, perform ! ReadableByteStreamControllerClose(branch1.[[controller]]).
  3. If canceled2 is false, perform ! ReadableByteStreamControllerClose(branch2.[[controller]]).
  4. If branch1.[[controller]].[[pendingPullIntos]] is not empty, perform ! ReadableByteStreamControllerRespond(branch1.[[controller]], 0).
  5. If branch2.[[controller]].[[pendingPullIntos]] is not empty, perform ! ReadableByteStreamControllerRespond(branch2.[[controller]], 0).
  6. If canceled1 is false or canceled2 is false, resolve cancelPromise with undefined.
  error steps
  1. Set reading to false.
3. Perform ! ReadableStreamDefaultReaderRead(reader, readRequest).
Let pullWithBYOBReader be the following steps, given view and forBranch2:
1. If reader implements ReadableStreamDefaultReader,
  1. Assert: reader.[[readRequests]] is empty.
  2. Perform ! ReadableStreamDefaultReaderRelease(reader).
  3. Set reader to ! AcquireReadableStreamBYOBReader(stream).
  4. Perform forwardReaderError, given reader.
2. Let byobBranch be branch2 if forBranch2 is true, and branch1 otherwise.
3. Let otherBranch be branch2 if forBranch2 is false, and branch1 otherwise.
4. Let readIntoRequest be a read-into request with the following items:
  chunk steps, given chunk
  1. Queue a microtask to perform the following steps:
    
    Set readAgainForBranch1 to false.
    
    Set readAgainForBranch2 to false.
    
    Let byobCanceled be canceled2 if forBranch2 is true, and canceled1 otherwise.
    
    Let otherCanceled be canceled2 if forBranch2 is false, and canceled1 otherwise.
    
    If otherCanceled is false,
    
    Let cloneResult be CloneAsUint8Array(chunk).
    
    If cloneResult is an abrupt completion,
    
    Perform ! ReadableByteStreamControllerError(byobBranch.[[controller]], cloneResult.[[Value]]).
    
    Perform ! ReadableByteStreamControllerError(otherBranch.[[controller]], cloneResult.[[Value]]).
    
    Resolve cancelPromise with ! ReadableStreamCancel(stream, cloneResult.[[Value]]).
    
    Return.
    
    Otherwise, let clonedChunk be cloneResult.[[Value]].
    
    If byobCanceled is false, perform ! ReadableByteStreamControllerRespondWithNewView(byobBranch.[[controller]], chunk).
    
    Perform ! ReadableByteStreamControllerEnqueue(otherBranch.[[controller]], clonedChunk).
    
    Otherwise, if byobCanceled is false, perform ! ReadableByteStreamControllerRespondWithNewView(byobBranch.[[controller]], chunk).
    
    Set reading to false.
    
    If readAgainForBranch1 is true, perform pull1Algorithm.
    
    Otherwise, if readAgainForBranch2 is true, perform pull2Algorithm.
  The microtask delay here is necessary because it takes at least a microtask to detect errors, when we use reader.[[closedPromise]] below. We want errors in stream to error both branches immediately, so we cannot let successful synchronously-available reads happen ahead of asynchronously-available errors.
  close steps, given chunk
  1. Set reading to false.
  2. Let byobCanceled be canceled2 if forBranch2 is true, and canceled1 otherwise.
  3. Let otherCanceled be canceled2 if forBranch2 is false, and canceled1 otherwise.
  4. If byobCanceled is false, perform ! ReadableByteStreamControllerClose(byobBranch.[[controller]]).
  5. If otherCanceled is false, perform ! ReadableByteStreamControllerClose(otherBranch.[[controller]]).
  6. If chunk is not undefined,
    
    Assert: chunk.[[ByteLength]] is 0.
    
    If byobCanceled is false, perform ! ReadableByteStreamControllerRespondWithNewView(byobBranch.[[controller]], chunk).
    
    If otherCanceled is false and otherBranch.[[controller]].[[pendingPullIntos]] is not empty, perform ! ReadableByteStreamControllerRespond(otherBranch.[[controller]], 0).
  7. If byobCanceled is false or otherCanceled is false, resolve cancelPromise with undefined.
  error steps
  1. Set reading to false.
5. Perform ! ReadableStreamBYOBReaderRead(reader, view, 1, readIntoRequest).
Let pull1Algorithm be the following steps:
1. If reading is true,
  1. Set readAgainForBranch1 to true.
  2. Return a promise resolved with undefined.
2. Set reading to true.
3. Let byobRequest be ! ReadableByteStreamControllerGetBYOBRequest(branch1.[[controller]]).
4. If byobRequest is null, perform pullWithDefaultReader.
5. Otherwise, perform pullWithBYOBReader, given byobRequest.[[view]] and false.
6. Return a promise resolved with undefined.
Let pull2Algorithm be the following steps:
1. If reading is true,
  1. Set readAgainForBranch2 to true.
  2. Return a promise resolved with undefined.
2. Set reading to true.
3. Let byobRequest be ! ReadableByteStreamControllerGetBYOBRequest(branch2.[[controller]]).
4. If byobRequest is null, perform pullWithDefaultReader.
5. Otherwise, perform pullWithBYOBReader, given byobRequest.[[view]] and true.
6. Return a promise resolved with undefined.
Let cancel1Algorithm be the following steps, taking a reason argument:
1. Set canceled1 to true.
2. Set reason1 to reason.
3. If canceled2 is true,
  1. Let compositeReason be ! CreateArrayFromList(« reason1, reason2 »).
  2. Let cancelResult be ! ReadableStreamCancel(stream, compositeReason).
  3. Resolve cancelPromise with cancelResult.
4. Return cancelPromise.
Let cancel2Algorithm be the following steps, taking a reason argument:
1. Set canceled2 to true.
2. Set reason2 to reason.
3. If canceled1 is true,
  1. Let compositeReason be ! CreateArrayFromList(« reason1, reason2 »).
  2. Let cancelResult be ! ReadableStreamCancel(stream, compositeReason).
  3. Resolve cancelPromise with cancelResult.
4. Return cancelPromise.
Let startAlgorithm be an algorithm that returns undefined.
Set branch1 to ! CreateReadableByteStream(startAlgorithm, pull1Algorithm, cancel1Algorithm).
Set branch2 to ! CreateReadableByteStream(startAlgorithm, pull2Algorithm, cancel2Algorithm).
Perform forwardReaderError, given reader.
Return « branch1, branch2 ».

4.9.2. Interfacing with controllers

In terms of specification factoring, the way that the ReadableStream class encapsulates the behavior of both simple readable streams and readable byte streams into a single class is by centralizing most of the potentially-varying logic inside the two controller classes, ReadableStreamDefaultController and ReadableByteStreamController. Those classes define most of the stateful internal slots and abstract operations for how a stream’s internal queue is managed and how it interfaces with its underlying source or underlying byte source.

Each controller class defines three internal methods, which are called by the ReadableStream algorithms:

[[CancelSteps]](reason): The controller’s steps that run in reaction to the stream being canceled, used to clean up the state stored in the controller and inform the underlying source.
[[PullSteps]](readRequest): The controller’s steps that run when a default reader is read from, used to pull from the controller any queued chunks, or pull from the underlying source to get more chunks.
[[ReleaseSteps]](): The controller’s steps that run when a reader is released, used to clean up reader-specific resources stored in the controller.

(These are defined as internal methods, instead of as abstract operations, so that they can be called polymorphically by the ReadableStream algorithms, without having to branch on which type of controller is present.)

The rest of this section concerns abstract operations that go in the other direction: they are used by the controller implementations to affect their associated ReadableStream object. This translates internal state changes of the controller into developer-facing results visible through the ReadableStream’s public API.

ReadableStreamAddReadIntoRequest(stream, readRequest) performs the following steps:

Assert: stream.[[reader]] implements ReadableStreamBYOBReader.
Assert: stream.[[state]] is "readable" or "closed".
Append readRequest to stream.[[reader]].[[readIntoRequests]].

ReadableStreamAddReadRequest(stream, readRequest) performs the following steps:

Assert: stream.[[reader]] implements ReadableStreamDefaultReader.
Assert: stream.[[state]] is "readable".
Append readRequest to stream.[[reader]].[[readRequests]].

ReadableStreamCancel(stream, reason) performs the following steps:

Set stream.[[disturbed]] to true.
If stream.[[state]] is "closed", return a promise resolved with undefined.
If stream.[[state]] is "errored", return a promise rejected with stream.[[storedError]].
Perform ! ReadableStreamClose(stream).
Let reader be stream.[[reader]].
If reader is not undefined and reader implements ReadableStreamBYOBReader,
1. Let readIntoRequests be reader.[[readIntoRequests]].
2. Set reader.[[readIntoRequests]] to an empty list.
3. For each readIntoRequest of readIntoRequests,
  1. Perform readIntoRequest’s close steps, given undefined.
Let sourceCancelPromise be ! stream.[[controller]].[[CancelSteps]](reason).
Return the result of reacting to sourceCancelPromise with a fulfillment step that returns undefined.

ReadableStreamClose(stream) performs the following steps:

Assert: stream.[[state]] is "readable".
Set stream.[[state]] to "closed".
Let reader be stream.[[reader]].
If reader is undefined, return.
Resolve reader.[[closedPromise]] with undefined.
If reader implements ReadableStreamDefaultReader,
1. Let readRequests be reader.[[readRequests]].
2. Set reader.[[readRequests]] to an empty list.
3. For each readRequest of readRequests,
  1. Perform readRequest’s close steps.

ReadableStreamError(stream, e) performs the following steps:

Assert: stream.[[state]] is "readable".
Set stream.[[state]] to "errored".
Set stream.[[storedError]] to e.
Let reader be stream.[[reader]].
If reader is undefined, return.
Reject reader.[[closedPromise]] with e.
Set reader.[[closedPromise]].[[PromiseIsHandled]] to true.
If reader implements ReadableStreamDefaultReader,
1. Perform ! ReadableStreamDefaultReaderErrorReadRequests(reader, e).
Otherwise,
1. Assert: reader implements ReadableStreamBYOBReader.
2. Perform ! ReadableStreamBYOBReaderErrorReadIntoRequests(reader, e).

ReadableStreamFulfillReadIntoRequest(stream, chunk, done) performs the following steps:

Assert: ! ReadableStreamHasBYOBReader(stream) is true.
Let reader be stream.[[reader]].
Assert: reader.[[readIntoRequests]] is not empty.
Let readIntoRequest be reader.[[readIntoRequests]][0].
Remove readIntoRequest from reader.[[readIntoRequests]].
If done is true, perform readIntoRequest’s close steps, given chunk.
Otherwise, perform readIntoRequest’s chunk steps, given chunk.

ReadableStreamFulfillReadRequest(stream, chunk, done) performs the following steps:

Assert: ! ReadableStreamHasDefaultReader(stream) is true.
Let reader be stream.[[reader]].
Assert: reader.[[readRequests]] is not empty.
Let readRequest be reader.[[readRequests]][0].
Remove readRequest from reader.[[readRequests]].
If done is true, perform readRequest’s close steps.
Otherwise, perform readRequest’s chunk steps, given chunk.

ReadableStreamGetNumReadIntoRequests(stream) performs the following steps:

Assert: ! ReadableStreamHasBYOBReader(stream) is true.
Return stream.[[reader]].[[readIntoRequests]]’s size.

ReadableStreamGetNumReadRequests(stream) performs the following steps:

Assert: ! ReadableStreamHasDefaultReader(stream) is true.
Return stream.[[reader]].[[readRequests]]’s size.

ReadableStreamHasBYOBReader(stream) performs the following steps:

Let reader be stream.[[reader]].
If reader is undefined, return false.
If reader implements ReadableStreamBYOBReader, return true.
Return false.

ReadableStreamHasDefaultReader(stream) performs the following steps:

Let reader be stream.[[reader]].
If reader is undefined, return false.
If reader implements ReadableStreamDefaultReader, return true.
Return false.

4.9.3. Readers

The following abstract operations support the implementation and manipulation of ReadableStreamDefaultReader and ReadableStreamBYOBReader instances.

ReadableStreamReaderGenericCancel(reader, reason) performs the following steps:

Let stream be reader.[[stream]].
Assert: stream is not undefined.
Return ! ReadableStreamCancel(stream, reason).

ReadableStreamReaderGenericInitialize(reader, stream) performs the following steps:

Set reader.[[stream]] to stream.
Set stream.[[reader]] to reader.
If stream.[[state]] is "readable",
1. Set reader.[[closedPromise]] to a new promise.
Otherwise, if stream.[[state]] is "closed",
1. Set reader.[[closedPromise]] to a promise resolved with undefined.
Otherwise,
1. Assert: stream.[[state]] is "errored".
2. Set reader.[[closedPromise]] to a promise rejected with stream.[[storedError]].
3. Set reader.[[closedPromise]].[[PromiseIsHandled]] to true.

ReadableStreamReaderGenericRelease(reader) performs the following steps:

Let stream be reader.[[stream]].
Assert: stream is not undefined.
Assert: stream.[[reader]] is reader.
If stream.[[state]] is "readable", reject reader.[[closedPromise]] with a TypeError exception.
Otherwise, set reader.[[closedPromise]] to a promise rejected with a TypeError exception.
Set reader.[[closedPromise]].[[PromiseIsHandled]] to true.
Perform ! stream.[[controller]].[[ReleaseSteps]]().
Set stream.[[reader]] to undefined.
Set reader.[[stream]] to undefined.

ReadableStreamBYOBReaderErrorReadIntoRequests(reader, e) performs the following steps:

Let readIntoRequests be reader.[[readIntoRequests]].
Set reader.[[readIntoRequests]] to a new empty list.
For each readIntoRequest of readIntoRequests,
1. Perform readIntoRequest’s error steps, given e.

ReadableStreamBYOBReaderRead(reader, view, min, readIntoRequest) performs the following steps:

Let stream be reader.[[stream]].
Assert: stream is not undefined.
Set stream.[[disturbed]] to true.
If stream.[[state]] is "errored", perform readIntoRequest’s error steps given stream.[[storedError]].
Otherwise, perform ! ReadableByteStreamControllerPullInto(stream.[[controller]], view, min, readIntoRequest).

ReadableStreamBYOBReaderRelease(reader) performs the following steps:

Perform ! ReadableStreamReaderGenericRelease(reader).
Let e be a new TypeError exception.
Perform ! ReadableStreamBYOBReaderErrorReadIntoRequests(reader, e).

ReadableStreamDefaultReaderErrorReadRequests(reader, e) performs the following steps:

Let readRequests be reader.[[readRequests]].
Set reader.[[readRequests]] to a new empty list.
For each readRequest of readRequests,
1. Perform readRequest’s error steps, given e.

ReadableStreamDefaultReaderRead(reader, readRequest) performs the following steps:

Let stream be reader.[[stream]].
Assert: stream is not undefined.
Set stream.[[disturbed]] to true.
If stream.[[state]] is "closed", perform readRequest’s close steps.
Otherwise, if stream.[[state]] is "errored", perform readRequest’s error steps given stream.[[storedError]].
Otherwise,
1. Assert: stream.[[state]] is "readable".
2. Perform ! stream.[[controller]].[[PullSteps]](readRequest).

ReadableStreamDefaultReaderRelease(reader) performs the following steps:

Perform ! ReadableStreamReaderGenericRelease(reader).
Let e be a new TypeError exception.
Perform ! ReadableStreamDefaultReaderErrorReadRequests(reader, e).

SetUpReadableStreamBYOBReader(reader, stream) performs the following steps:

If ! IsReadableStreamLocked(stream) is true, throw a TypeError exception.
If stream.[[controller]] does not implement ReadableByteStreamController, throw a TypeError exception.
Perform ! ReadableStreamReaderGenericInitialize(reader, stream).
Set reader.[[readIntoRequests]] to a new empty list.

SetUpReadableStreamDefaultReader(reader, stream) performs the following steps:

If ! IsReadableStreamLocked(stream) is true, throw a TypeError exception.
Perform ! ReadableStreamReaderGenericInitialize(reader, stream).
Set reader.[[readRequests]] to a new empty list.

4.9.4. Default controllers

The following abstract operations support the implementation of the ReadableStreamDefaultController class.

ReadableStreamDefaultControllerCallPullIfNeeded(controller) performs the following steps:

Let shouldPull be ! ReadableStreamDefaultControllerShouldCallPull(controller).
If shouldPull is false, return.
If controller.[[pulling]] is true,
1. Set controller.[[pullAgain]] to true.
2. Return.
Assert: controller.[[pullAgain]] is false.
Set controller.[[pulling]] to true.
Let pullPromise be the result of performing controller.[[pullAlgorithm]].
Upon fulfillment of pullPromise,
1. Set controller.[[pulling]] to false.
2. If controller.[[pullAgain]] is true,
  1. Set controller.[[pullAgain]] to false.
  2. Perform ! ReadableStreamDefaultControllerCallPullIfNeeded(controller).
Upon rejection of pullPromise with reason e,
1. Perform ! ReadableStreamDefaultControllerError(controller, e).

ReadableStreamDefaultControllerShouldCallPull(controller) performs the following steps:

Let stream be controller.[[stream]].
If ! ReadableStreamDefaultControllerCanCloseOrEnqueue(controller) is false, return false.
If controller.[[started]] is false, return false.
If ! IsReadableStreamLocked(stream) is true and ! ReadableStreamGetNumReadRequests(stream) > 0, return true.
Let desiredSize be ! ReadableStreamDefaultControllerGetDesiredSize(controller).
Assert: desiredSize is not null.
If desiredSize > 0, return true.
Return false.

ReadableStreamDefaultControllerClearAlgorithms(controller) is called once the stream is closed or errored and the algorithms will not be executed any more. By removing the algorithm references it permits the underlying source object to be garbage collected even if the ReadableStream itself is still referenced.

This is observable using weak references. See tc39/proposal-weakrefs#31 for more detail.

It performs the following steps:

Set controller.[[pullAlgorithm]] to undefined.
Set controller.[[cancelAlgorithm]] to undefined.
Set controller.[[strategySizeAlgorithm]] to undefined.

ReadableStreamDefaultControllerClose(controller) performs the following steps:

If ! ReadableStreamDefaultControllerCanCloseOrEnqueue(controller) is false, return.
Let stream be controller.[[stream]].
Set controller.[[closeRequested]] to true.
If controller.[[queue]] is empty,
1. Perform ! ReadableStreamDefaultControllerClearAlgorithms(controller).
2. Perform ! ReadableStreamClose(stream).

ReadableStreamDefaultControllerEnqueue(controller, chunk) performs the following steps:

If ! ReadableStreamDefaultControllerCanCloseOrEnqueue(controller) is false, return.
Let stream be controller.[[stream]].
If ! IsReadableStreamLocked(stream) is true and ! ReadableStreamGetNumReadRequests(stream) > 0, perform ! ReadableStreamFulfillReadRequest(stream, chunk, false).
Otherwise,
1. Let result be the result of performing controller.[[strategySizeAlgorithm]], passing in chunk, and interpreting the result as a completion record.
2. If result is an abrupt completion,
  1. Perform ! ReadableStreamDefaultControllerError(controller, result.[[Value]]).
  2. Return result.
3. Let chunkSize be result.[[Value]].
4. Let enqueueResult be EnqueueValueWithSize(controller, chunk, chunkSize).
5. If enqueueResult is an abrupt completion,
  1. Perform ! ReadableStreamDefaultControllerError(controller, enqueueResult.[[Value]]).
  2. Return enqueueResult.
Perform ! ReadableStreamDefaultControllerCallPullIfNeeded(controller).

ReadableStreamDefaultControllerError(controller, e) performs the following steps:

Let stream be controller.[[stream]].
If stream.[[state]] is not "readable", return.
Perform ! ResetQueue(controller).
Perform ! ReadableStreamDefaultControllerClearAlgorithms(controller).
Perform ! ReadableStreamError(stream, e).

ReadableStreamDefaultControllerGetDesiredSize(controller) performs the following steps:

Let state be controller.[[stream]].[[state]].
If state is "errored", return null.
If state is "closed", return 0.
Return controller.[[strategyHWM]] − controller.[[queueTotalSize]].

ReadableStreamDefaultControllerHasBackpressure(controller) is used in the implementation of TransformStream. It performs the following steps:

If ! ReadableStreamDefaultControllerShouldCallPull(controller) is true, return false.
Otherwise, return true.

ReadableStreamDefaultControllerCanCloseOrEnqueue(controller) performs the following steps:

Let state be controller.[[stream]].[[state]].
If controller.[[closeRequested]] is false and state is "readable", return true.
Otherwise, return false.

The case where controller.[[closeRequested]] is false, but state is not "readable", happens when the stream is errored via controller.error(), or when it is closed without its controller’s controller.close() method ever being called: e.g., if the stream was closed by a call to stream.cancel().

SetUpReadableStreamDefaultController(stream, controller, startAlgorithm, pullAlgorithm, cancelAlgorithm, highWaterMark, sizeAlgorithm) performs the following steps:

Assert: stream.[[controller]] is undefined.
Set controller.[[stream]] to stream.
Perform ! ResetQueue(controller).
Set controller.[[started]], controller.[[closeRequested]], controller.[[pullAgain]], and controller.[[pulling]] to false.
Set controller.[[strategySizeAlgorithm]] to sizeAlgorithm and controller.[[strategyHWM]] to highWaterMark.
Set controller.[[pullAlgorithm]] to pullAlgorithm.
Set controller.[[cancelAlgorithm]] to cancelAlgorithm.
Set stream.[[controller]] to controller.
Let startResult be the result of performing startAlgorithm. (This might throw an exception.)
Let startPromise be a promise resolved with startResult.
Upon fulfillment of startPromise,
1. Set controller.[[started]] to true.
2. Assert: controller.[[pulling]] is false.
3. Assert: controller.[[pullAgain]] is false.
4. Perform ! ReadableStreamDefaultControllerCallPullIfNeeded(controller).
Upon rejection of startPromise with reason r,
1. Perform ! ReadableStreamDefaultControllerError(controller, r).

SetUpReadableStreamDefaultControllerFromUnderlyingSource(stream, underlyingSource, underlyingSourceDict, highWaterMark, sizeAlgorithm) performs the following steps:

Let controller be a new ReadableStreamDefaultController.
Let startAlgorithm be an algorithm that returns undefined.
Let pullAlgorithm be an algorithm that returns a promise resolved with undefined.
Let cancelAlgorithm be an algorithm that returns a promise resolved with undefined.
If underlyingSourceDict["start"] exists, then set startAlgorithm to an algorithm which returns the result of invoking underlyingSourceDict["start"] with argument list « controller » and callback this value underlyingSource.
If underlyingSourceDict["pull"] exists, then set pullAlgorithm to an algorithm which returns the result of invoking underlyingSourceDict["pull"] with argument list « controller » and callback this value underlyingSource.
If underlyingSourceDict["cancel"] exists, then set cancelAlgorithm to an algorithm which takes an argument reason and returns the result of invoking underlyingSourceDict["cancel"] with argument list « reason » and callback this value underlyingSource.
Perform ? SetUpReadableStreamDefaultController(stream, controller, startAlgorithm, pullAlgorithm, cancelAlgorithm, highWaterMark, sizeAlgorithm).

4.9.5. Byte stream controllers

ReadableByteStreamControllerCallPullIfNeeded(controller) performs the following steps:

Let shouldPull be ! ReadableByteStreamControllerShouldCallPull(controller).
If shouldPull is false, return.
If controller.[[pulling]] is true,
1. Set controller.[[pullAgain]] to true.
2. Return.
Assert: controller.[[pullAgain]] is false.
Set controller.[[pulling]] to true.
Let pullPromise be the result of performing controller.[[pullAlgorithm]].
Upon fulfillment of pullPromise,
1. Set controller.[[pulling]] to false.
2. If controller.[[pullAgain]] is true,
  1. Set controller.[[pullAgain]] to false.
  2. Perform ! ReadableByteStreamControllerCallPullIfNeeded(controller).
Upon rejection of pullPromise with reason e,
1. Perform ! ReadableByteStreamControllerError(controller, e).

ReadableByteStreamControllerClearAlgorithms(controller) is called once the stream is closed or errored and the algorithms will not be executed any more. By removing the algorithm references it permits the underlying byte source object to be garbage collected even if the ReadableStream itself is still referenced.

This is observable using weak references. See tc39/proposal-weakrefs#31 for more detail.

It performs the following steps:

Set controller.[[pullAlgorithm]] to undefined.
Set controller.[[cancelAlgorithm]] to undefined.

ReadableByteStreamControllerClearPendingPullIntos(controller) performs the following steps:

Perform ! ReadableByteStreamControllerInvalidateBYOBRequest(controller).
Set controller.[[pendingPullIntos]] to a new empty list.

ReadableByteStreamControllerClose(controller) performs the following steps:

Let stream be controller.[[stream]].
If controller.[[closeRequested]] is true or stream.[[state]] is not "readable", return.
If controller.[[queueTotalSize]] > 0,
1. Set controller.[[closeRequested]] to true.
2. Return.
If controller.[[pendingPullIntos]] is not empty,
1. Let firstPendingPullInto be controller.[[pendingPullIntos]][0].
2. If the remainder after dividing firstPendingPullInto’s bytes filled by firstPendingPullInto’s element size is not 0,
  1. Let e be a new TypeError exception.
  2. Perform ! ReadableByteStreamControllerError(controller, e).
  3. Throw e.
Perform ! ReadableByteStreamControllerClearAlgorithms(controller).
Perform ! ReadableStreamClose(stream).

ReadableByteStreamControllerCommitPullIntoDescriptor(stream, pullIntoDescriptor) performs the following steps:

Assert: stream.[[state]] is not "errored".
Assert: pullIntoDescriptor.reader type is not "none".
Let done be false.
If stream.[[state]] is "closed",
1. Assert: the remainder after dividing pullIntoDescriptor’s bytes filled by pullIntoDescriptor’s element size is 0.
2. Set done to true.
Let filledView be ! ReadableByteStreamControllerConvertPullIntoDescriptor(pullIntoDescriptor).
If pullIntoDescriptor’s reader type is "default",
1. Perform ! ReadableStreamFulfillReadRequest(stream, filledView, done).
Otherwise,
1. Assert: pullIntoDescriptor’s reader type is "byob".
2. Perform ! ReadableStreamFulfillReadIntoRequest(stream, filledView, done).

ReadableByteStreamControllerConvertPullIntoDescriptor(pullIntoDescriptor) performs the following steps:

Let bytesFilled be pullIntoDescriptor’s bytes filled.
Let elementSize be pullIntoDescriptor’s element size.
Assert: bytesFilled ≤ pullIntoDescriptor’s byte length.
Assert: the remainder after dividing bytesFilled by elementSize is 0.
Let buffer be ! TransferArrayBuffer(pullIntoDescriptor’s buffer).
Return ! Construct(pullIntoDescriptor’s view constructor, « buffer, pullIntoDescriptor’s byte offset, bytesFilled ÷ elementSize »).

ReadableByteStreamControllerEnqueue(controller, chunk) performs the following steps:

Let stream be controller.[[stream]].
If controller.[[closeRequested]] is true or stream.[[state]] is not "readable", return.
Let buffer be chunk.[[ViewedArrayBuffer]].
Let byteOffset be chunk.[[ByteOffset]].
Let byteLength be chunk.[[ByteLength]].
If ! IsDetachedBuffer(buffer) is true, throw a TypeError exception.
Let transferredBuffer be ? TransferArrayBuffer(buffer).
If controller.[[pendingPullIntos]] is not empty,
1. Let firstPendingPullInto be controller.[[pendingPullIntos]][0].
2. If ! IsDetachedBuffer(firstPendingPullInto’s buffer) is true, throw a TypeError exception.
3. Perform ! ReadableByteStreamControllerInvalidateBYOBRequest(controller).
4. Set firstPendingPullInto’s buffer to ! TransferArrayBuffer(firstPendingPullInto’s buffer).
5. If firstPendingPullInto’s reader type is "none", perform ? ReadableByteStreamControllerEnqueueDetachedPullIntoToQueue(controller, firstPendingPullInto).
If ! ReadableStreamHasDefaultReader(stream) is true,
1. Perform ! ReadableByteStreamControllerProcessReadRequestsUsingQueue(controller).
2. If ! ReadableStreamGetNumReadRequests(stream) is 0,
  1. Assert: controller.[[pendingPullIntos]] is empty.
  2. Perform ! ReadableByteStreamControllerEnqueueChunkToQueue(controller, transferredBuffer, byteOffset, byteLength).
3. Otherwise,
  1. Assert: controller.[[queue]] is empty.
  2. If controller.[[pendingPullIntos]] is not empty,
    1. Assert: controller.[[pendingPullIntos]][0]'s reader type is "default".
    2. Perform ! ReadableByteStreamControllerShiftPendingPullInto(controller).
  3. Let transferredView be ! Construct(%Uint8Array%, « transferredBuffer, byteOffset, byteLength »).
  4. Perform ! ReadableStreamFulfillReadRequest(stream, transferredView, false).
Otherwise, if ! ReadableStreamHasBYOBReader(stream) is true,
1. Perform ! ReadableByteStreamControllerEnqueueChunkToQueue(controller, transferredBuffer, byteOffset, byteLength).
2. Let filledPullIntos be the result of performing ! ReadableByteStreamControllerProcessPullIntoDescriptorsUsingQueue(controller).
3. For each filledPullInto of filledPullIntos,
  1. Perform ! ReadableByteStreamControllerCommitPullIntoDescriptor(stream, filledPullInto).
Otherwise,
1. Assert: ! IsReadableStreamLocked(stream) is false.
2. Perform ! ReadableByteStreamControllerEnqueueChunkToQueue(controller, transferredBuffer, byteOffset, byteLength).
Perform ! ReadableByteStreamControllerCallPullIfNeeded(controller).

ReadableByteStreamControllerEnqueueChunkToQueue(controller, buffer, byteOffset, byteLength) performs the following steps:

Append a new readable byte stream queue entry with buffer buffer, byte offset byteOffset, and byte length byteLength to controller.[[queue]].
Set controller.[[queueTotalSize]] to controller.[[queueTotalSize]] + byteLength.

ReadableByteStreamControllerEnqueueClonedChunkToQueue(controller, buffer, byteOffset, byteLength) performs the following steps:

Let cloneResult be CloneArrayBuffer(buffer, byteOffset, byteLength, %ArrayBuffer%).
If cloneResult is an abrupt completion,
1. Perform ! ReadableByteStreamControllerError(controller, cloneResult.[[Value]]).
2. Return cloneResult.
Perform ! ReadableByteStreamControllerEnqueueChunkToQueue(controller, cloneResult.[[Value]], 0, byteLength).

ReadableByteStreamControllerEnqueueDetachedPullIntoToQueue(controller, pullIntoDescriptor) performs the following steps:

Assert: pullIntoDescriptor’s reader type is "none".
If pullIntoDescriptor’s bytes filled > 0, perform ? ReadableByteStreamControllerEnqueueClonedChunkToQueue(controller, pullIntoDescriptor’s buffer, pullIntoDescriptor’s byte offset, pullIntoDescriptor’s bytes filled).
Perform ! ReadableByteStreamControllerShiftPendingPullInto(controller).

ReadableByteStreamControllerError(controller, e) performs the following steps:

Let stream be controller.[[stream]].
If stream.[[state]] is not "readable", return.
Perform ! ReadableByteStreamControllerClearPendingPullIntos(controller).
Perform ! ResetQueue(controller).
Perform ! ReadableByteStreamControllerClearAlgorithms(controller).
Perform ! ReadableStreamError(stream, e).

ReadableByteStreamControllerFillHeadPullIntoDescriptor(controller, size, pullIntoDescriptor) performs the following steps:

Assert: either controller.[[pendingPullIntos]] is empty, or controller.[[pendingPullIntos]][0] is pullIntoDescriptor.
Assert: controller.[[byobRequest]] is null.
Set pullIntoDescriptor’s bytes filled to bytes filled + size.

ReadableByteStreamControllerFillPullIntoDescriptorFromQueue(controller, pullIntoDescriptor) performs the following steps:

Let maxBytesToCopy be min(controller.[[queueTotalSize]], pullIntoDescriptor’s byte length − pullIntoDescriptor’s bytes filled).
Let maxBytesFilled be pullIntoDescriptor’s bytes filled + maxBytesToCopy.
Let totalBytesToCopyRemaining be maxBytesToCopy.
Let ready be false.
Assert: ! IsDetachedBuffer(pullIntoDescriptor’s buffer) is false.
Assert: pullIntoDescriptor’s bytes filled < pullIntoDescriptor’s minimum fill.
Let remainderBytes be the remainder after dividing maxBytesFilled by pullIntoDescriptor’s element size.
Let maxAlignedBytes be maxBytesFilled − remainderBytes.
If maxAlignedBytes ≥ pullIntoDescriptor’s minimum fill,
1. Set totalBytesToCopyRemaining to maxAlignedBytes − pullIntoDescriptor’s bytes filled.
2. Set ready to true.
  
  A descriptor for a read() request that is not yet filled up to its minimum length will stay at the head of the queue, so the underlying source can keep filling it.
Let queue be controller.[[queue]].
While totalBytesToCopyRemaining > 0,
1. Let headOfQueue be queue[0].
2. Let bytesToCopy be min(totalBytesToCopyRemaining, headOfQueue’s byte length).
3. Let destStart be pullIntoDescriptor’s byte offset + pullIntoDescriptor’s bytes filled.
4. Let descriptorBuffer be pullIntoDescriptor’s buffer.
5. Let queueBuffer be headOfQueue’s buffer.
6. Let queueByteOffset be headOfQueue’s byte offset.
7. Assert: ! CanCopyDataBlockBytes(descriptorBuffer, destStart, queueBuffer, queueByteOffset, bytesToCopy) is true.
  
  If this assertion were to fail (due to a bug in this specification or its implementation), then the next step may read from or write to potentially invalid memory. The user agent should always check this assertion, and stop in an implementation-defined manner if it fails (e.g. by crashing the process, or by erroring the stream).
8. Perform ! CopyDataBlockBytes(descriptorBuffer.[[ArrayBufferData]], destStart, queueBuffer.[[ArrayBufferData]], queueByteOffset, bytesToCopy).
9. If headOfQueue’s byte length is bytesToCopy,
  1. Remove queue[0].
10. Otherwise,
  1. Set headOfQueue’s byte offset to headOfQueue’s byte offset + bytesToCopy.
  2. Set headOfQueue’s byte length to headOfQueue’s byte length − bytesToCopy.
11. Set controller.[[queueTotalSize]] to controller.[[queueTotalSize]] − bytesToCopy.
12. Perform ! ReadableByteStreamControllerFillHeadPullIntoDescriptor(controller, bytesToCopy, pullIntoDescriptor).
13. Set totalBytesToCopyRemaining to totalBytesToCopyRemaining − bytesToCopy.
If ready is false,
1. Assert: controller.[[queueTotalSize]] is 0.
2. Assert: pullIntoDescriptor’s bytes filled > 0.
3. Assert: pullIntoDescriptor’s bytes filled < pullIntoDescriptor’s minimum fill.
Return ready.

ReadableByteStreamControllerFillReadRequestFromQueue(controller, readRequest) performs the following steps:

Assert: controller.[[queueTotalSize]] > 0.
Let entry be controller.[[queue]][0].
Remove entry from controller.[[queue]].
Set controller.[[queueTotalSize]] to controller.[[queueTotalSize]] − entry’s byte length.
Perform ! ReadableByteStreamControllerHandleQueueDrain(controller).
Let view be ! Construct(%Uint8Array%, « entry’s buffer, entry’s byte offset, entry’s byte length »).
Perform readRequest’s chunk steps, given view.

ReadableByteStreamControllerGetBYOBRequest(controller) performs the following steps:

If controller.[[byobRequest]] is null and controller.[[pendingPullIntos]] is not empty,
1. Let firstDescriptor be controller.[[pendingPullIntos]][0].
2. Let view be ! Construct(%Uint8Array%, « firstDescriptor’s buffer, firstDescriptor’s byte offset + firstDescriptor’s bytes filled, firstDescriptor’s byte length − firstDescriptor’s bytes filled »).
3. Let byobRequest be a new ReadableStreamBYOBRequest.
4. Set byobRequest.[[controller]] to controller.
5. Set byobRequest.[[view]] to view.
6. Set controller.[[byobRequest]] to byobRequest.
Return controller.[[byobRequest]].

ReadableByteStreamControllerGetDesiredSize(controller) performs the following steps:

Let state be controller.[[stream]].[[state]].
If state is "errored", return null.
If state is "closed", return 0.
Return controller.[[strategyHWM]] − controller.[[queueTotalSize]].

ReadableByteStreamControllerHandleQueueDrain(controller) performs the following steps:

Assert: controller.[[stream]].[[state]] is "readable".
If controller.[[queueTotalSize]] is 0 and controller.[[closeRequested]] is true,
1. Perform ! ReadableByteStreamControllerClearAlgorithms(controller).
2. Perform ! ReadableStreamClose(controller.[[stream]]).
Otherwise,
1. Perform ! ReadableByteStreamControllerCallPullIfNeeded(controller).

ReadableByteStreamControllerInvalidateBYOBRequest(controller) performs the following steps:

If controller.[[byobRequest]] is null, return.
Set controller.[[byobRequest]].[[controller]] to undefined.
Set controller.[[byobRequest]].[[view]] to null.
Set controller.[[byobRequest]] to null.

ReadableByteStreamControllerProcessPullIntoDescriptorsUsingQueue(controller) performs the following steps:

Assert: controller.[[closeRequested]] is false.
Let filledPullIntos be a new empty list.
While controller.[[pendingPullIntos]] is not empty,
1. If controller.[[queueTotalSize]] is 0, then break.
2. Let pullIntoDescriptor be controller.[[pendingPullIntos]][0].
3. If ! ReadableByteStreamControllerFillPullIntoDescriptorFromQueue(controller, pullIntoDescriptor) is true,
  1. Perform ! ReadableByteStreamControllerShiftPendingPullInto(controller).
  2. Append pullIntoDescriptor to filledPullIntos.
Return filledPullIntos.

ReadableByteStreamControllerProcessReadRequestsUsingQueue(controller) performs the following steps:

Let reader be controller.[[stream]].[[reader]].
Assert: reader implements ReadableStreamDefaultReader.
While reader.[[readRequests]] is not empty,
1. If controller.[[queueTotalSize]] is 0, return.
2. Let readRequest be reader.[[readRequests]][0].
3. Remove readRequest from reader.[[readRequests]].
4. Perform ! ReadableByteStreamControllerFillReadRequestFromQueue(controller, readRequest).

ReadableByteStreamControllerPullInto(controller, view, min, readIntoRequest) performs the following steps:

Let stream be controller.[[stream]].
Let elementSize be 1.
Let ctor be %DataView%.
If view has a [[TypedArrayName]] internal slot (i.e., it is not a DataView),
1. Set elementSize to the element size specified in the typed array constructors table for view.[[TypedArrayName]].
2. Set ctor to the constructor specified in the typed array constructors table for view.[[TypedArrayName]].
Let minimumFill be min × elementSize.
Assert: minimumFill ≥ 0 and minimumFill ≤ view.[[ByteLength]].
Assert: the remainder after dividing minimumFill by elementSize is 0.
Let byteOffset be view.[[ByteOffset]].
Let byteLength be view.[[ByteLength]].
Let bufferResult be TransferArrayBuffer(view.[[ViewedArrayBuffer]]).
If bufferResult is an abrupt completion,
1. Perform readIntoRequest’s error steps, given bufferResult.[[Value]].
2. Return.
Let buffer be bufferResult.[[Value]].
Let pullIntoDescriptor be a new pull-into descriptor with

buffer
buffer
buffer byte length
buffer.[[ArrayBufferByteLength]]
byte offset
byteOffset
byte length
byteLength
bytes filled
0
minimum fill
minimumFill
element size
elementSize
view constructor
ctor
reader type
"byob"
If controller.[[pendingPullIntos]] is not empty,
1. Append pullIntoDescriptor to controller.[[pendingPullIntos]].
2. Perform ! ReadableStreamAddReadIntoRequest(stream, readIntoRequest).
3. Return.
If stream.[[state]] is "closed",
1. Let emptyView be ! Construct(ctor, « pullIntoDescriptor’s buffer, pullIntoDescriptor’s byte offset, 0 »).
2. Perform readIntoRequest’s close steps, given emptyView.
3. Return.
If controller.[[queueTotalSize]] > 0,
1. If ! ReadableByteStreamControllerFillPullIntoDescriptorFromQueue(controller, pullIntoDescriptor) is true,
  1. Let filledView be ! ReadableByteStreamControllerConvertPullIntoDescriptor(pullIntoDescriptor).
  2. Perform ! ReadableByteStreamControllerHandleQueueDrain(controller).
  3. Perform readIntoRequest’s chunk steps, given filledView.
  4. Return.
2. If controller.[[closeRequested]] is true,
  1. Let e be a TypeError exception.
  2. Perform ! ReadableByteStreamControllerError(controller, e).
  3. Perform readIntoRequest’s error steps, given e.
  4. Return.
Append pullIntoDescriptor to controller.[[pendingPullIntos]].
Perform ! ReadableStreamAddReadIntoRequest(stream, readIntoRequest).
Perform ! ReadableByteStreamControllerCallPullIfNeeded(controller).

ReadableByteStreamControllerRespond(controller, bytesWritten) performs the following steps:

Assert: controller.[[pendingPullIntos]] is not empty.
Let firstDescriptor be controller.[[pendingPullIntos]][0].
Let state be controller.[[stream]].[[state]].
If state is "closed",
1. If bytesWritten is not 0, throw a TypeError exception.
Otherwise,
1. Assert: state is "readable".
2. If bytesWritten is 0, throw a TypeError exception.
3. If firstDescriptor’s bytes filled + bytesWritten > firstDescriptor’s byte length, throw a RangeError exception.
Set firstDescriptor’s buffer to ! TransferArrayBuffer(firstDescriptor’s buffer).
Perform ? ReadableByteStreamControllerRespondInternal(controller, bytesWritten).

ReadableByteStreamControllerRespondInClosedState(controller, firstDescriptor) performs the following steps:

Assert: the remainder after dividing firstDescriptor’s bytes filled by firstDescriptor’s element size is 0.
If firstDescriptor’s reader type is "none", perform ! ReadableByteStreamControllerShiftPendingPullInto(controller).
Let stream be controller.[[stream]].
If ! ReadableStreamHasBYOBReader(stream) is true,
1. Let filledPullIntos be a new empty list.
2. While filledPullIntos’s size < ! ReadableStreamGetNumReadIntoRequests(stream),
  1. Let pullIntoDescriptor be ! ReadableByteStreamControllerShiftPendingPullInto(controller).
  2. Append pullIntoDescriptor to filledPullIntos.
3. For each filledPullInto of filledPullIntos,
  1. Perform ! ReadableByteStreamControllerCommitPullIntoDescriptor(stream, filledPullInto).

ReadableByteStreamControllerRespondInReadableState(controller, bytesWritten, pullIntoDescriptor) performs the following steps:

Assert: pullIntoDescriptor’s bytes filled + bytesWritten ≤ pullIntoDescriptor’s byte length.
Perform ! ReadableByteStreamControllerFillHeadPullIntoDescriptor(controller, bytesWritten, pullIntoDescriptor).
If pullIntoDescriptor’s reader type is "none",
1. Perform ? ReadableByteStreamControllerEnqueueDetachedPullIntoToQueue(controller, pullIntoDescriptor).
2. Let filledPullIntos be the result of performing ! ReadableByteStreamControllerProcessPullIntoDescriptorsUsingQueue(controller).
3. For each filledPullInto of filledPullIntos,
  1. Perform ! ReadableByteStreamControllerCommitPullIntoDescriptor(controller.[[stream]], filledPullInto).
4. Return.
If pullIntoDescriptor’s bytes filled < pullIntoDescriptor’s minimum fill, return.

A descriptor for a read() request that is not yet filled up to its minimum length will stay at the head of the queue, so the underlying source can keep filling it.
Perform ! ReadableByteStreamControllerShiftPendingPullInto(controller).
Let remainderSize be the remainder after dividing pullIntoDescriptor’s bytes filled by pullIntoDescriptor’s element size.
If remainderSize > 0,
1. Let end be pullIntoDescriptor’s byte offset + pullIntoDescriptor’s bytes filled.
2. Perform ? ReadableByteStreamControllerEnqueueClonedChunkToQueue(controller, pullIntoDescriptor’s buffer, end − remainderSize, remainderSize).
Set pullIntoDescriptor’s bytes filled to pullIntoDescriptor’s bytes filled − remainderSize.
Let filledPullIntos be the result of performing ! ReadableByteStreamControllerProcessPullIntoDescriptorsUsingQueue(controller).
Perform ! ReadableByteStreamControllerCommitPullIntoDescriptor(controller.[[stream]], pullIntoDescriptor).
For each filledPullInto of filledPullIntos,
1. Perform ! ReadableByteStreamControllerCommitPullIntoDescriptor(controller.[[stream]], filledPullInto).

ReadableByteStreamControllerRespondInternal(controller, bytesWritten) performs the following steps:

Let firstDescriptor be controller.[[pendingPullIntos]][0].
Assert: ! CanTransferArrayBuffer(firstDescriptor’s buffer) is true.
Perform ! ReadableByteStreamControllerInvalidateBYOBRequest(controller).
Let state be controller.[[stream]].[[state]].
If state is "closed",
1. Assert: bytesWritten is 0.
2. Perform ! ReadableByteStreamControllerRespondInClosedState(controller, firstDescriptor).
Otherwise,
1. Assert: state is "readable".
2. Assert: bytesWritten > 0.
3. Perform ? ReadableByteStreamControllerRespondInReadableState(controller, bytesWritten, firstDescriptor).
Perform ! ReadableByteStreamControllerCallPullIfNeeded(controller).

ReadableByteStreamControllerRespondWithNewView(controller, view) performs the following steps:

Assert: controller.[[pendingPullIntos]] is not empty.
Assert: ! IsDetachedBuffer(view.[[ViewedArrayBuffer]]) is false.
Let firstDescriptor be controller.[[pendingPullIntos]][0].
Let state be controller.[[stream]].[[state]].
If state is "closed",
1. If view.[[ByteLength]] is not 0, throw a TypeError exception.
Otherwise,
1. Assert: state is "readable".
2. If view.[[ByteLength]] is 0, throw a TypeError exception.
If firstDescriptor’s byte offset + firstDescriptor’ bytes filled is not view.[[ByteOffset]], throw a RangeError exception.
If firstDescriptor’s buffer byte length is not view.[[ViewedArrayBuffer]].[[ByteLength]], throw a RangeError exception.
If firstDescriptor’s bytes filled + view.[[ByteLength]] > firstDescriptor’s byte length, throw a RangeError exception.
Let viewByteLength be view.[[ByteLength]].
Set firstDescriptor’s buffer to ? TransferArrayBuffer(view.[[ViewedArrayBuffer]]).
Perform ? ReadableByteStreamControllerRespondInternal(controller, viewByteLength).

ReadableByteStreamControllerShiftPendingPullInto(controller) performs the following steps:

Assert: controller.[[byobRequest]] is null.
Let descriptor be controller.[[pendingPullIntos]][0].
Remove descriptor from controller.[[pendingPullIntos]].
Return descriptor.

ReadableByteStreamControllerShouldCallPull(controller) performs the following steps:

Let stream be controller.[[stream]].
If stream.[[state]] is not "readable", return false.
If controller.[[closeRequested]] is true, return false.
If controller.[[started]] is false, return false.
If ! ReadableStreamHasDefaultReader(stream) is true and ! ReadableStreamGetNumReadRequests(stream) > 0, return true.
If ! ReadableStreamHasBYOBReader(stream) is true and ! ReadableStreamGetNumReadIntoRequests(stream) > 0, return true.
Let desiredSize be ! ReadableByteStreamControllerGetDesiredSize(controller).
Assert: desiredSize is not null.
If desiredSize > 0, return true.
Return false.

SetUpReadableByteStreamController(stream, controller, startAlgorithm, pullAlgorithm, cancelAlgorithm, highWaterMark, autoAllocateChunkSize) performs the following steps:

Assert: stream.[[controller]] is undefined.
If autoAllocateChunkSize is not undefined,
1. Assert: ! IsInteger(autoAllocateChunkSize) is true.
2. Assert: autoAllocateChunkSize is positive.
Set controller.[[stream]] to stream.
Set controller.[[pullAgain]] and controller.[[pulling]] to false.
Set controller.[[byobRequest]] to null.
Perform ! ResetQueue(controller).
Set controller.[[closeRequested]] and controller.[[started]] to false.
Set controller.[[strategyHWM]] to highWaterMark.
Set controller.[[pullAlgorithm]] to pullAlgorithm.
Set controller.[[cancelAlgorithm]] to cancelAlgorithm.
Set controller.[[autoAllocateChunkSize]] to autoAllocateChunkSize.
Set controller.[[pendingPullIntos]] to a new empty list.
Set stream.[[controller]] to controller.
Let startResult be the result of performing startAlgorithm.
Let startPromise be a promise resolved with startResult.
Upon fulfillment of startPromise,
1. Set controller.[[started]] to true.
2. Assert: controller.[[pulling]] is false.
3. Assert: controller.[[pullAgain]] is false.
4. Perform ! ReadableByteStreamControllerCallPullIfNeeded(controller).
Upon rejection of startPromise with reason r,
1. Perform ! ReadableByteStreamControllerError(controller, r).

SetUpReadableByteStreamControllerFromUnderlyingSource(stream, underlyingSource, underlyingSourceDict, highWaterMark) performs the following steps:

Let controller be a new ReadableByteStreamController.
Let startAlgorithm be an algorithm that returns undefined.
Let pullAlgorithm be an algorithm that returns a promise resolved with undefined.
Let cancelAlgorithm be an algorithm that returns a promise resolved with undefined.
If underlyingSourceDict["start"] exists, then set startAlgorithm to an algorithm which returns the result of invoking underlyingSourceDict["start"] with argument list « controller » and callback this value underlyingSource.
If underlyingSourceDict["pull"] exists, then set pullAlgorithm to an algorithm which returns the result of invoking underlyingSourceDict["pull"] with argument list « controller » and callback this value underlyingSource.
If underlyingSourceDict["cancel"] exists, then set cancelAlgorithm to an algorithm which takes an argument reason and returns the result of invoking underlyingSourceDict["cancel"] with argument list « reason » and callback this value underlyingSource.
Let autoAllocateChunkSize be underlyingSourceDict["autoAllocateChunkSize"], if it exists, or undefined otherwise.
If autoAllocateChunkSize is 0, then throw a TypeError exception.
Perform ? SetUpReadableByteStreamController(stream, controller, startAlgorithm, pullAlgorithm, cancelAlgorithm, highWaterMark, autoAllocateChunkSize).

Streams

Abstract

1. Introduction

2. Model

2.1. Readable streams

2.2. Writable streams

2.3. Transform streams

2.4. Pipe chains and backpressure

2.5. Internal queues and queuing strategies

2.6. Locking

3. Conventions

4. Readable streams

4.1. Using readable streams

4.2. The ReadableStream class

4.2.1. Interface definition

4.2.2. Internal slots

4.2.3. The underlying source API

4.2.4. Constructor, methods, and properties

4.2.5. Asynchronous iteration

4.2.6. Transfer via postMessage()

4.3. The ReadableStreamGenericReader mixin

4.3.1. Mixin definition

4.3.2. Internal slots

4.3.3. Methods and properties

4.4. The ReadableStreamDefaultReader class

4.4.1. Interface definition

4.4.2. Internal slots

4.4.3. Constructor, methods, and properties

4.5. The ReadableStreamBYOBReader class

4.5.1. Interface definition

4.5.2. Internal slots

4.5.3. Constructor, methods, and properties

4.6. The ReadableStreamDefaultController class

4.6.1. Interface definition

4.6.2. Internal slots

4.6.3. Methods and properties

4.6.4. Internal methods

4.7. The ReadableByteStreamController class

4.7.1. Interface definition

4.7.2. Internal slots

4.7.3. Methods and properties

4.7.4. Internal methods

4.8. The ReadableStreamBYOBRequest class

4.8.1. Interface definition

4.8.2. Internal slots

4.8.3. Methods and properties

4.9. Abstract operations

4.9.1. Working with readable streams

4.9.2. Interfacing with controllers

4.9.3. Readers

4.9.4. Default controllers

4.9.5. Byte stream controllers

5. Writable streams

4.2. The `ReadableStream` class

4.2.6. Transfer via `postMessage()`

4.3. The `ReadableStreamGenericReader` mixin

4.4. The `ReadableStreamDefaultReader` class

4.5. The `ReadableStreamBYOBReader` class

4.6. The `ReadableStreamDefaultController` class

4.7. The `ReadableByteStreamController` class

4.8. The `ReadableStreamBYOBRequest` class