Homebridge plugin for Dreo brand smart devices. Dreo Fans on Amazon (Affiliate link)

• DR-HAF001S
• DR-HAF003S
• DR-HAF004S
• DR-HCF003S
• DR-HPF001S
• DR-HPF002S
• DR-HTF001S
• DR-HTF002S
• DR-HTF004S
• DR-HTF005S
• DR-HTF007S
• DR-HTF011S

• DR-HSH004S
• DR-HSH006S
• DR-HSH009S
• ‎DR-HSH017S

• DR-HM713S

Please open an issue if you have another model that works or doesn't work. If you have another device type and can help me test some code out I would definitely be open to adding support.

• Fan Speed: Fan speed is displayed as a percentage value with steps that are equivalent to those of the Dreo app. (for example, a fan with speeds 1-6 will have steps at 17%, 33%, 50% etc)

• Oscillate: Toggles fan oscillation

• Temperature Sensor: Displays current temperature sensor reading. (for supported devices, check your devices capabilities) Because the Dreo fan temperature sensors are not entirely accurate, you can also set a specific temperature offset for your devices.

• Child Lock: Lock physical fan controls

• Heat Mode: Controls Dreo 'Eco' mode
• Cool Mode: Controls Dreo 'Fan Only' mode
• Auto Mode: Controls Dreo 'Heat' speeds, represented as an offset from the minimum temperature (for example, a heater with speeds 1-3 and a minimum temp of 41F can be controlled by setting temperature to 41, 42, 43)
• Current Temperature: Displays current temperature sensor reading
• Fan Speed: Controls heater vent angle
• Oscillate: Toggles heater vent oscillation
• Child Lock: Lock physical heater controls
• Hardware Display: Changes temperature unit on physical hardware display

• Auto Mode: Controls Dreo Manual Mode, as HomeKit hides Humidity slider in Auto Mode. You can adjust Mist Level, which reflects the Dero Manual Mode in the Dreo app.
• Humidity Mode: Controls Dreo Auto Mode & Sleep Mode mode. HomeKit do not support Sleep Mode, But you can switch between Sleep Mode and Auto Mode using the 'Sleep' switch in HomeKit.
• Fan Speed: Controls the Mist Level of the humidifier. Humidifier will automatically switch to Manual Mode if this is adjusted in HomeKit.
• Sleep Mode: This is a switch that will toggle the humidifier into Sleep Mode.
  • Note: Do not forget to rename this switch as HomeKit will name it as a Switch by default.
• Warm Mist: This is a switch turns on the humidifier's Warm Mist.
  • Note: Do not forget to rename this switch as HomeKit will name it as a Switch by default.

• Humidity Sensor: Displays current humidity sensor reading.
• Water Level Sensor: It's a binary sensor. Displays 100% if the Humidifier has any water in the tank. If no water, it will display 0%. Dero humidifiers do not have a water level sensor.

npm install -g homebridge-dreo

(Or install through the Homebridge UI)

Provide your Dreo app login credentials

"platforms": [
  {
    "options": {
      "email": "[email protected]",
      "password": "00000000"
    },
    "hideTemperatureSensor": false,
    "temperatureOffset": 0,
    "name": "Dreo Platform",
    "platform": "DreoPlatform"
  }
]

If you'd like to add support for a new device type, you might find this writeup from @JeffSteinbok (HomeAssistant plugin maintainer) useful for tracing the Dreo App:

https://github.com/JeffSteinbok/hass-dreo/blob/main/contributing.md

homebridge-tp-link-tapo: Similar repo that helped me figure out some of the http request functions necessary for this project.