tx_sdr tool for transmitting data to SDRs, based on rtl_sdr from librtlsdr, and rx_sdr from rx_tools, using the SoapySDR vendor-neutral SDR support library, intended to support a wide range of TX-capable devices.

Mostly untested pre-release quality code, YMMV.

Install SoapySDR, then run:

mkdir build ; cd build
cmake ..
make

After building, these binaries should then be available at the build directory:

• tx_sdr - transmits raw I/Q data
• pulse_gen - create I/Q data file from pulse text
• code_gen - create I/Q data file from code text

Also some test and example programs:

• encode_ascii - simple CLI to test ASCII encoding
• encode_dmc - simple CLI to test DMC encoding
• encode_hex - simple CLI to test HEX encoding
• encode_imc - simple CLI to test IMC encoding
• encode_mc - simple CLI to test MC encoding
• code_dump - an example how to parse and process code text
• example_gen - an example how to parse code text programmatically

• CU4 - 4-bit /channel, unsigned I/Q data (1 byte per sample)
• CS4 - 4-bit /channel, signed I/Q data (1 byte per sample)
• CU8 - 8-bit /channel, unsigned I/Q data
• CS8 - 8-bit /channel, signed I/Q data
• CU12 - 12-bit /channel, unsigned I/Q data (3 bytes per sample)
• CS12 - 12-bit /channel, signed I/Q data (3 bytes per sample)
• CU16 - 16-bit /channel, unsigned I/Q data
• CS16 - 16-bit /channel, signed I/Q data
• CU32 - 32-bit /channel, unsigned I/Q data
• CS32 - 32-bit /channel, signed I/Q data
• CU64 - 64-bit /channel, unsigned I/Q data
• CS64 - 64-bit /channel, signed I/Q data
• CF32 - 32-bit /channel, float I/Q data
• CF64 - 64-bit /channel, double I/Q data

For CU8 (CU4) the value range is 0 to 0xff (0xf) with uniform distribution, i.e. a bias of 127.5 (7.5). This matches the output format of the RTL-SDR receivers.

For CS8 (CS4) the value range is -127 to 127 (-7 to 7) with uniform distribution, i.e. a smaller dynamic range than the unsigned formats, but without bias.

• CODE text
• PULSE text
  • OOK text
  • ASK text
  • FSK text
  • PSK text
  • TONE text

Tools to be added soon will implement modulation and encoding for:

• OOK, ASK, AM
• FSK, 4-FSK, GFSK, FM
• Manchester

Currently tested with a LimeSDR-USB, LimeSDR-mini, and LimeNET Micro, but supporting all devices supported by SoapySDR is the goal. Experimental, use at your own risk, but bug reports and patches are welcome.