Docker image for Network UPS Tools server version 2.8.1 for Legrand UPS.

This image provides a complete UPS monitoring service (USB driver only).

Start the container:

# docker run \
	--name nut \
	--detach \
	--publish 3493:3493 \
	--device /dev/bus/usb/xxx/yyy \
  -v ./config/ups.conf:/etc/nut/ups.conf \
  -v ./config/upsd.conf:/etc/nut/upsd.conf \
  -v ./config/upsd.users:/etc/nut/upsd.users \
  -v ./config/upsmon.conf:/etc/nut/upsmon.conf \
	satblip/nut

This image needs to be configured via the file that you can find in the config directory. Token are in place in those files, here are the values you need to replace:

Example value: ups

The name of the UPS.

Example value: Eaton 5SC

This allows you to set a brief description that upsd will provide to clients that ask for a list of connected equipment.

Example value: usbhid-ups

This specifies which program will be monitoring this UPS.

Example value: auto

This is the serial port where the UPS is connected.

Example value: upsmon

This is the username used for communication between upsmon and upsd processes.

Example value: secret

This is the password for the upsmon user.

Example value: echo 'System shutdown not configured!'

This is the command upsmon will run when the system needs to be brought down. The command will be run from inside the container.