Orange Pi fan controller.
This repository provides scripts that can be run on the Orange Pi that will monitor the core temperature and start the fan when the temperature reaches a certain threshold.
To use this code, you'll have to install a fan.
The instructions for do that you can be found on this guide for RPi: Control Your Raspberry Pi Fan (and Temperature) with Python.
THIS SCRIPT IS SET TO CONTROL FAN WITH PIN 9 (Tested on board: Orange Pi 3 LTS)
sudo apt install python3-pip
sudo git clone https://github.com/Boia11/orange-pi-fan-controller.git
cd orange-pi-fan-controller
sudo chmod +x ./script/install
sudo ./script/install
--------- fan controller on boot ---------
sudo mv fancontrol.sh /etc/init.d/
sudo chmod +x /etc/init.d/fancontrol.sh
sudo update-rc.d fancontrol.sh defaults
sudo /etc/init.d/fancontrol.sh start --- OR --- sudo reboot
+------+-----+----------+------+---+ OPi 3 +---+------+----------+-----+------+
| GPIO | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | GPIO |
+------+-----+----------+------+---+----++----+---+------+----------+-----+------+
| | | 3.3V | | | 1 || 2 | | | 5V | | |
| 122 | 0 | SDA.0 | OFF | 0 | 3 || 4 | | | 5V | | |
| 121 | 1 | SCL.0 | OFF | 0 | 5 || 6 | | | GND | | |
| 118 | 2 | PWM.0 | OFF | 0 | 7 || 8 | 0 | OFF | PL02 | 3 | 354 |
| | | GND | | | 9 || 10 | 0 | OFF | PL03 | 4 | 355 |
| 120 | 5 | RXD.3 | ALT4 | 0 | 11 || 12 | 0 | OFF | PD18 | 6 | 114 |
| 119 | 7 | TXD.3 | ALT4 | 0 | 13 || 14 | | | GND | | |
| 362 | 8 | PL10 | OFF | 0 | 15 || 16 | 0 | OFF | PD15 | 9 | 111 | <--- Pin Physical 16 as wPi pin 9
| | | 3.3V | | | 17 || 18 | 0 | OFF | PD16 | 10 | 112 |
| 229 | 11 | MOSI.1 | ALT2 | 0 | 19 || 20 | | | GND | | |
| 230 | 12 | MISO.1 | ALT2 | 0 | 21 || 22 | 0 | OFF | PD21 | 13 | 117 |
| 228 | 14 | SCLK.1 | ALT2 | 0 | 23 || 24 | 0 | ALT2 | CE.1 | 15 | 227 |
| | | GND | | | 25 || 26 | 0 | OFF | PL08 | 16 | 360 |
+------+-----+----------+------+---+----++----+---+------+----------+-----+------+
| GPIO | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | GPIO |
+------+-----+----------+------+---+ OPi 3 +---+------+----------+-----+------+
This script require wiringOP install on OS.