<?php

use Utopia\Config\Config;

return [
    [
        'category' => 'General',
        'description' => '',
        'variables' => [
            [
                'name' => '_APP_ENV',
                'description' => 'Set your server running environment. By default, the var is set to \'development\'. When deploying to production, change it to: \'production\'.',
                'introduction' => '',
                'default' => 'production',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_LOCALE',
                'description' => 'Set your Appwrite\'s locale. By default, the locale is set to \'en\'.',
                'introduction' => '',
                'default' => 'en',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_OPTIONS_ABUSE',
                'description' => 'Allows you to disable abuse checks and API rate limiting. By default, set to \'enabled\'. To cancel the abuse checking, set to \'disabled\'. It is not recommended to disable this check-in a production environment.',
                'introduction' => '',
                'default' => 'enabled',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_OPTIONS_FORCE_HTTPS',
                'description' => 'Allows you to force HTTPS connection to your API. This feature redirects any HTTP call to HTTPS and adds the \'Strict-Transport-Security\' header to all HTTP responses. By default, set to \'enabled\'. To disable, set to \'disabled\'. This feature will work only when your ports are set to default 80 and 443.',
                'introduction' => '',
                'default' => 'disabled',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_OPENSSL_KEY_V1',
                'description' => 'This is your server private secret key that is used to encrypt all sensitive data on your server. Appwrite server encrypts all secret data on your server like webhooks, HTTP passwords, user sessions, and storage files. The var is not set by default, if you wish to take advantage of Appwrite encryption capabilities you should change it and make sure to **keep it a secret and have a backup for it**.',
                'introduction' => '',
                'default' => 'your-secret-key',
                'required' => true,
                'question' => 'Choose a secret API key, make sure to make a backup of your key in a secure location',
                'filter' => 'token'
            ],
            [
                'name' => '_APP_DOMAIN',
                'description' => 'Your Appwrite domain address. When setting a public suffix domain, Appwrite will attempt to issue a valid SSL certificate automatically. When used with a dev domain, Appwrite will assign a self-signed SSL certificate. The default value is \'localhost\'.',
                'introduction' => '',
                'default' => 'localhost',
                'required' => true,
                'question' => 'Enter your Appwrite hostname',
                'filter' => ''
            ],
            [
                'name' => '_APP_DOMAIN_TARGET',
                'description' => 'A DNS A record hostname to serve as a CNAME target for your Appwrite custom domains. You can use the same value as used for the Appwrite \'_APP_DOMAIN\' variable. The default value is \'localhost\'.',
                'introduction' => '',
                'default' => 'localhost',
                'required' => true,
                'question' => 'Enter a DNS A record hostname to serve as a CNAME for your custom domains.' . PHP_EOL . 'You can use the same value as used for the Appwrite hostname.',
                'filter' => ''
            ],
            [
                'name' => '_APP_CONSOLE_WHITELIST_ROOT',
                'description' => 'This option allows you to disable the creation of new users on the Appwrite console. When enabled only 1 user will be able to use the registration form. New users can be added by invting them to your project. By default this option is enabled.',
                'introduction' => '0.8.0',
                'default' => 'enabled',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_CONSOLE_WHITELIST_EMAILS',
                'description' => 'This option allows you to limit creation of new users on the Appwrite console. This option is very useful for small teams or sole developers. To enable it, pass a list of allowed email addresses separated by a comma.',
                'introduction' => '',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            // [
            //     'name' => '_APP_CONSOLE_WHITELIST_DOMAINS',
            //     'description' => 'This option allows you to limit creation of users to Appwrite console for users sharing the same email domains. This option is very useful for team working with company emails domain.\n\nTo enable this option, pass a list of allowed email domains separated by a comma.',
            //     'introduction' => '',
            //     'default' => '',
            //     'required' => false,
            //     'question' => '',
            // ],
            [
                'name' => '_APP_CONSOLE_WHITELIST_IPS',
                'description' => 'This last option allows you to limit creation of users in Appwrite console for users sharing the same set of IP addresses. This option is very useful for team working with a VPN service or a company IP.\n\nTo enable/activate this option, pass a list of allowed IP addresses separated by a comma.',
                'introduction' => '',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_SYSTEM_EMAIL_NAME',
                'description' => 'This is the sender name value that will appear on email messages sent to developers from the Appwrite console. The default value is: \'Appwrite\'. You can use url encoded strings for spaces and special chars.',
                'introduction' => '0.7.0',
                'default' => 'Appwrite',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_SYSTEM_EMAIL_ADDRESS',
                'description' => 'This is the sender email address that will appear on email messages sent to developers from the Appwrite console. The default value is \'team@appwrite.io\'. You should choose an email address that is allowed to be used from your SMTP server to avoid the server email ending in the users\' SPAM folders.',
                'introduction' => '0.7.0',
                'default' => 'team@appwrite.io',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_SYSTEM_RESPONSE_FORMAT',
                'description' => 'Use this environment variable to set the default Appwrite HTTP response format to support an older version of Appwrite. This option is useful to overcome breaking changes between versions. You can also use the `X-Appwrite-Response-Format` HTTP request header to overwrite the response for a specific request. This variable accepts any valid Appwrite version. To use the current version format, leave the value of the variable empty.',
                'introduction' => '0.7.0',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_SYSTEM_SECURITY_EMAIL_ADDRESS',
                'description' => 'This is the email address used to issue SSL certificates for custom domains or the user agent in your webhooks payload.',
                'introduction' => '0.7.0',
                'default' => 'certs@appwrite.io',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_USAGE_STATS',
                'description' => 'This variable allows you to disable the collection and displaying of usage stats. This value is set to \'enabled\' by default, to disable the usage stats set the value to \'disabled\'. When disabled, it\'s recommended to turn off the Worker Usage, Influxdb and Telegraf containers for better resource usage.',
                'introduction' => '0.7.0',
                'default' => 'enabled',
                'required' => false,
                'question' => '',
                'filter' => ''
            ]
        ],
    ],
    [
        'category' => 'Redis',
        'description' => 'Appwrite uses a Redis server for managing cache, queues and scheduled tasks. The Redis env vars are used to allow Appwrite server to connect to the Redis container.',
        'variables' => [
            [
                'name' => '_APP_REDIS_HOST',
                'description' => 'Redis server hostname address. Default value is: \'redis\'.',
                'introduction' => '',
                'default' => 'redis',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_REDIS_PORT',
                'description' => 'Redis server TCP port. Default value is: \'6379\'.',
                'introduction' => '',
                'default' => '6379',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_REDIS_USER',
                'description' => 'Redis server user. This is an optional variable. Default value is an empty string.',
                'introduction' => '0.7',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_REDIS_PASS',
                'description' => 'Redis server password. This is an optional variable. Default value is an empty string.',
                'introduction' => '0.7',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
        ],
    ],
    [
        'category' => 'MariaDB',
        'description' => 'Appwrite is using a MariaDB server for managing persistent database data. The MariaDB env vars are used to allow Appwrite server to connect to the MariaDB container.',
        'variables' => [
            [
                'name' => '_APP_DB_HOST',
                'description' => 'MariaDB server host name address. Default value is: \'mariadb\'.',
                'introduction' => '',
                'default' => 'mariadb',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_DB_PORT',
                'description' => 'MariaDB server TCP port. Default value is: \'3306\'.',
                'introduction' => '',
                'default' => '3306',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_DB_SCHEMA',
                'description' => 'MariaDB server database schema. Default value is: \'appwrite\'.',
                'introduction' => '',
                'default' => 'appwrite',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_DB_USER',
                'description' => 'MariaDB server user name. Default value is: \'user\'.',
                'introduction' => '',
                'default' => 'user',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_DB_PASS',
                'description' => 'MariaDB server user password. Default value is: \'password\'.',
                'introduction' => '',
                'default' => 'password',
                'required' => false,
                'question' => '',
                'filter' => 'password'
            ],
            [
                'name' => '_APP_DB_ROOT_PASS',
                'description' => 'MariaDB server root password. Default value is: \'rootsecretpassword\'.',
                'introduction' => '',
                'default' => 'rootsecretpassword',
                'required' => false,
                'question' => '',
                'filter' => 'password'
            ],
        ],
    ],
    [
        'category' => 'InfluxDB',
        'description' => 'Appwrite uses an InfluxDB server for managing time-series data and server stats. The InfluxDB env vars are used to allow Appwrite server to connect to the InfluxDB container.',
        'variables' => [
            [
                'name' => '_APP_INFLUXDB_HOST',
                'description' => 'InfluxDB server host name address. Default value is: \'influxdb\'.',
                'introduction' => '',
                'default' => 'influxdb',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_INFLUXDB_PORT',
                'description' => 'InfluxDB server TCP port. Default value is: \'8086\'.',
                'introduction' => '',
                'default' => '8086',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
        ],
    ],
    [
        'category' => 'StatsD',
        'description' => 'Appwrite uses a StatsD server for aggregating and sending stats data over a fast UDP connection. The StatsD env vars are used to allow Appwrite server to connect to the StatsD container.',
        'variables' => [
            [
                'name' => '_APP_STATSD_HOST',
                'description' => 'StatsD server host name address. Default value is: \'telegraf\'.',
                'introduction' => '',
                'default' => 'telegraf',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_STATSD_PORT',
                'description' => 'StatsD server TCP port. Default value is: \'8125\'.',
                'introduction' => '',
                'default' => '8125',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
        ],
    ],
    [
        'category' => 'SMTP',
        'description' => 'Appwrite is using an SMTP server for emailing your projects users and server admins. The SMTP env vars are used to allow Appwrite server to connect to the SMTP container.\n\nIf running in production, it might be easier to use a 3rd party SMTP server as it might be a little more difficult to set up a production SMTP server that will not send all your emails into your user\'s SPAM folder.',
        'variables' => [
            [
                'name' => '_APP_SMTP_HOST',
                'description' => 'SMTP server host name address. Use an empty string to disable all mail sending from the server. The default value for this variable is an empty string',
                'introduction' => '',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_SMTP_PORT',
                'description' => 'SMTP server TCP port. Empty by default.',
                'introduction' => '',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_SMTP_SECURE',
                'description' => 'SMTP secure connection protocol. Empty by default, change to \'tls\' if running on a secure connection.',
                'introduction' => '',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_SMTP_USERNAME',
                'description' => 'SMTP server user name. Empty by default.',
                'introduction' => '',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_SMTP_PASSWORD',
                'description' => 'SMTP server user password. Empty by default.',
                'introduction' => '',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
        ],
    ],
    [
        'category' => 'Storage',
        'description' => '',
        'variables' => [
            [
                'name' => '_APP_STORAGE_LIMIT',
                'description' => 'Maximun file size allowed for file upload. The default value is 10MB limitation. You should pass your size limit value in bytes.',
                'introduction' => '0.7.0',
                'default' => '10000000',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_STORAGE_ANTIVIRUS',
                'description' => 'This variable allows you to disable the internal anti-virus scans. This value is set to \'disabled\' by default, to enable the scans set the value to \'enabled\'. Before enabling, you must add the ClamAV service and depend on it on main Appwrite service.',
                'introduction' => '',
                'default' => 'disabled',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_STORAGE_ANTIVIRUS_HOST',
                'description' => 'ClamAV server host name address. Default value is: \'clamav\'.',
                'introduction' => '0.7.0',
                'default' => 'clamav',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_STORAGE_ANTIVIRUS_PORT',
                'description' => 'ClamAV server TCP port. Default value is: \'3310\'.',
                'introduction' => '0.7.0',
                'default' => '3310',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
        ],
    ],
    [
        'category' => 'Functions',
        'description' => '',
        'variables' => [
            [
                'name' => '_APP_FUNCTIONS_TIMEOUT',
                'description' => 'The maximum number of seconds allowed as a timeout value when creating a new function. The default value is 900 seconds.',
                'introduction' => '0.7.0',
                'default' => '900',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_FUNCTIONS_CONTAINERS',
                'description' => 'The maximum number of containers Appwrite is allowed to keep alive in the background for function environments. Running containers allow faster execution time as there is no need to recreate each container every time a function gets executed. The default value is 10.',
                'introduction' => '0.7.0',
                'default' => '10',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_FUNCTIONS_CPUS',
                'description' => 'The maximum number of CPU core a single cloud function is allowed to use. Please note that setting a value higher than available cores will result in a function error, which might result in an error. The default value is empty. When it\'s empty, CPU limit will be disabled.',
                'introduction' => '0.7.0',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_FUNCTIONS_MEMORY',
                'description' => 'The maximum amount of memory a single cloud function is allowed to use in megabytes. The default value is  empty. When it\'s empty, memory limit will be disabled.',
                'introduction' => '0.7.0',
                'default' => '256',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_FUNCTIONS_MEMORY_SWAP',
                'description' => 'The maximum amount of swap memory a single cloud function is allowed to use in megabytes. The default value is  empty. When it\'s empty, swap memory limit will be disabled.',
                'introduction' => '0.7.0',
                'default' => '256',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_FUNCTIONS_RUNTIMES',
                'description' => "This option allows you to limit the available environments for cloud functions. This option is very useful for low-cost servers to safe disk space.\n\nTo enable/activate this option, pass a list of allowed environments separated by a comma.\n\nCurrently, supported environments are: " . \implode(', ', \array_keys(Config::getParam('runtimes'))),
                'introduction' => '0.8.0',
                'default' => 'node-16.0,php-8.0,python-3.9,ruby-3.0,java-16.0',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => '_APP_FUNCTIONS_ENVS',
                'description' => 'Deprectated with 0.8.0, use \'_APP_FUNCTIONS_RUNTIMES\' instead!',
                'introduction' => '0.7.0',
                'default' => 'node-16.0,php-7.4,python-3.9,ruby-3.0,java-16.0',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => 'DOCKERHUB_PULL_USERNAME',
                'description' => 'The username for hub.docker.com. This variable is used to pull images from hub.docker.com.',
                'introduction' => '0.10.0',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => 'DOCKERHUB_PULL_PASSWORD',
                'description' => 'The password for hub.docker.com. This variable is used to pull images from hub.docker.com.',
                'introduction' => '0.10.0',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
            [
                'name' => 'DOCKERHUB_PULL_EMAIL',
                'description' => 'The email for hub.docker.com. This variable is used to pull images from hub.docker.com.',
                'introduction' => '0.10.0',
                'default' => '',
                'required' => false,
                'question' => '',
                'filter' => ''
            ],
        ],
        [
            'category' => 'Maintenance',
            'description' => '',
            'variables' => [
                [
                    'name' => '_APP_MAINTENANCE_INTERVAL',
                    'description' => 'Interval value containing the number of seconds that the Appwrite maintenance process should wait before executing system cleanups and optimizations. The default value is 86400 seconds (1 day).',
                    'introduction' => '0.7.0',
                    'default' => '86400',
                    'required' => false,
                    'question' => '',
                    'filter' => ''
                ],
                [
                    'name' => '_APP_MAINTENANCE_RETENTION_EXECUTION',
                    'description' => 'The maximum duration (in seconds) upto which to retain execution logs. The default value is 1209600 seconds (14 days).',
                    'introduction' => '0.7.0',
                    'default' => '1209600',
                    'required' => false,
                    'question' => '',
                    'filter' => ''
                ],
                [
                    'name' => '_APP_MAINTENANCE_RETENTION_AUDIT',
                    'description' => 'IThe maximum duration (in seconds) upto which to retain audit logs. The default value is 1209600 seconds (14 days).',
                    'introduction' => '0.7.0',
                    'default' => '1209600',
                    'required' => false,
                    'question' => '',
                    'filter' => ''
                ],
                [
                    'name' => '_APP_MAINTENANCE_RETENTION_ABUSE',
                    'description' => 'The maximum duration (in seconds) upto which to retain abuse logs. The default value is 86400 seconds (1 day).',
                    'introduction' => '0.7.0',
                    'default' => '86400',
                    'required' => false,
                    'question' => '',
                    'filter' => ''
                ]
            ],
        ],
    ],
];