rfc2616.txt   rfc2616-symrefs.txt 
Network Working Group R. Fielding Network Working Group R. Fielding
Request for Comments: 2616 UC Irvine Internet-Draft UC Irvine
Obsoletes: 2068 J. Gettys Obsoletes: 2068 (if approved) J. Gettys
Category: Standards Track Compaq/W3C Intended status: Standards Track Compaq/W3C
J. Mogul Expires: December 3, 1999 J. Mogul
Compaq Compaq
H. Frystyk H. Frystyk
W3C/MIT W3C/MIT
L. Masinter L. Masinter
Xerox Xerox
P. Leach P. Leach
Microsoft Microsoft
T. Berners-Lee T. Berners-Lee
W3C/MIT W3C/MIT
Hypertext Transfer Protocol -- HTTP/1.1 Hypertext Transfer Protocol -- HTTP/1.1
rfc2616-symrefs
Status of this Memo Status of this Memo
This document specifies an Internet standards track protocol for the By submitting this Internet-Draft, each author represents that any
Internet community, and requests discussion and suggestions for applicable patent or other IPR claims of which he or she is aware
improvements. Please refer to the current edition of the "Internet have been or will be disclosed, and any of which he or she becomes
Official Protocol Standards" (STD 1) for the standardization state aware will be disclosed, in accordance with Section 6 of BCP 79.
and status of this protocol. Distribution of this memo is unlimited.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on December 3, 1999.
Copyright Notice Copyright Notice
Copyright (C) The Internet Society (1999). All Rights Reserved. Copyright (C) The IETF Trust (1999).
Abstract Abstract
The Hypertext Transfer Protocol (HTTP) is an application-level The Hypertext Transfer Protocol (HTTP) is an application-level
protocol for distributed, collaborative, hypermedia information protocol for distributed, collaborative, hypermedia information
systems. It is a generic, stateless, protocol which can be used for systems. It is a generic, stateless, protocol which can be used for
many tasks beyond its use for hypertext, such as name servers and many tasks beyond its use for hypertext, such as name servers and
distributed object management systems, through extension of its distributed object management systems, through extension of its
request methods, error codes and headers [47]. A feature of HTTP is request methods, error codes and headers [RFC2324]. A feature of
the typing and negotiation of data representation, allowing systems HTTP is the typing and negotiation of data representation, allowing
to be built independently of the data being transferred. systems to be built independently of the data being transferred.
HTTP has been in use by the World-Wide Web global information HTTP has been in use by the World-Wide Web global information
initiative since 1990. This specification defines the protocol initiative since 1990. This specification defines the protocol
referred to as "HTTP/1.1", and is an update to RFC 2068 [33]. referred to as "HTTP/1.1", and is an update to RFC 2068 [RFC2068].
Editorial Note (To be removed by RFC Editor)
This version of the HTTP specification contains only XML processing
changes from [RFC2616] in internet-draft form for use in creating
diffs.
Table of Contents Table of Contents
1 Introduction ...................................................7 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 9
1.1 Purpose......................................................7 1.1. Purpose . . . . . . . . . . . . . . . . . . . . . . . . 9
1.2 Requirements .................................................8 1.2. Requirements . . . . . . . . . . . . . . . . . . . . . . 9
1.3 Terminology ..................................................8 1.3. Terminology . . . . . . . . . . . . . . . . . . . . . . 10
1.4 Overall Operation ...........................................12 1.4. Overall Operation . . . . . . . . . . . . . . . . . . . 14
2 Notational Conventions and Generic Grammar ....................14 2. Notational Conventions and Generic Grammar . . . . . . . . . 16
2.1 Augmented BNF ...............................................14 2.1. Augmented BNF . . . . . . . . . . . . . . . . . . . . . 16
2.2 Basic Rules .................................................15 2.2. Basic Rules . . . . . . . . . . . . . . . . . . . . . . 18
3 Protocol Parameters ...........................................17 3. Protocol Parameters . . . . . . . . . . . . . . . . . . . . . 20
3.1 HTTP Version ................................................17 3.1. HTTP Version . . . . . . . . . . . . . . . . . . . . . . 20
3.2 Uniform Resource Identifiers ................................18 3.2. Uniform Resource Identifiers . . . . . . . . . . . . . . 21
3.2.1 General Syntax ...........................................19 3.2.1. General Syntax . . . . . . . . . . . . . . . . . . . 21
3.2.2 http URL .................................................19 3.2.2. http URL . . . . . . . . . . . . . . . . . . . . . . 22
3.2.3 URI Comparison ...........................................20 3.2.3. URI Comparison . . . . . . . . . . . . . . . . . . . 22
3.3 Date/Time Formats ...........................................20 3.3. Date/Time Formats . . . . . . . . . . . . . . . . . . . 23
3.3.1 Full Date ................................................20 3.3.1. Full Date . . . . . . . . . . . . . . . . . . . . . 23
3.3.2 Delta Seconds ............................................21 3.3.2. Delta Seconds . . . . . . . . . . . . . . . . . . . 24
3.4 Character Sets ..............................................21 3.4. Character Sets . . . . . . . . . . . . . . . . . . . . . 24
3.4.1 Missing Charset ..........................................22 3.4.1. Missing Charset . . . . . . . . . . . . . . . . . . 25
3.5 Content Codings .............................................23 3.5. Content Codings . . . . . . . . . . . . . . . . . . . . 25
3.6 Transfer Codings ............................................24 3.6. Transfer Codings . . . . . . . . . . . . . . . . . . . . 27
3.6.1 Chunked Transfer Coding ..................................25 3.6.1. Chunked Transfer Coding . . . . . . . . . . . . . . 28
3.7 Media Types .................................................26 3.7. Media Types . . . . . . . . . . . . . . . . . . . . . . 29
3.7.1 Canonicalization and Text Defaults .......................27 3.7.1. Canonicalization and Text Defaults . . . . . . . . . 30
3.7.2 Multipart Types ..........................................27 3.7.2. Multipart Types . . . . . . . . . . . . . . . . . . 30
3.8 Product Tokens ..............................................28 3.8. Product Tokens . . . . . . . . . . . . . . . . . . . . . 31
3.9 Quality Values ..............................................29 3.9. Quality Values . . . . . . . . . . . . . . . . . . . . . 32
3.10 Language Tags ...............................................29 3.10. Language Tags . . . . . . . . . . . . . . . . . . . . . 32
3.11 Entity Tags .................................................30 3.11. Entity Tags . . . . . . . . . . . . . . . . . . . . . . 33
3.12 Range Units .................................................30 3.12. Range Units . . . . . . . . . . . . . . . . . . . . . . 33
4 HTTP Message ..................................................31 4. HTTP Message . . . . . . . . . . . . . . . . . . . . . . . . 34
4.1 Message Types ...............................................31 4.1. Message Types . . . . . . . . . . . . . . . . . . . . . 34
4.2 Message Headers .............................................31 4.2. Message Headers . . . . . . . . . . . . . . . . . . . . 34
4.3 Message Body ................................................32 4.3. Message Body . . . . . . . . . . . . . . . . . . . . . . 35
4.4 Message Length ..............................................33 4.4. Message Length . . . . . . . . . . . . . . . . . . . . . 36
4.5 General Header Fields .......................................34 4.5. General Header Fields . . . . . . . . . . . . . . . . . 37
5 Request .......................................................35 5. Request . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
5.1 Request-Line ................................................35 5.1. Request-Line . . . . . . . . . . . . . . . . . . . . . . 38
5.1.1 Method ...................................................36 5.1.1. Method . . . . . . . . . . . . . . . . . . . . . . . 38
5.1.2 Request-URI ..............................................36 5.1.2. Request-URI . . . . . . . . . . . . . . . . . . . . 39
5.2 The Resource Identified by a Request ........................38 5.2. The Resource Identified by a Request . . . . . . . . . . 40
5.3 Request Header Fields .......................................38 5.3. Request Header Fields . . . . . . . . . . . . . . . . . 41
6 Response ......................................................39 6. Response . . . . . . . . . . . . . . . . . . . . . . . . . . 42
6.1 Status-Line .................................................39 6.1. Status-Line . . . . . . . . . . . . . . . . . . . . . . 42
6.1.1 Status Code and Reason Phrase ............................39 6.1.1. Status Code and Reason Phrase . . . . . . . . . . . 43
6.2 Response Header Fields ......................................41 6.2. Response Header Fields . . . . . . . . . . . . . . . . . 45
7 Entity ........................................................42 7. Entity . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
7.1 Entity Header Fields ........................................42 7.1. Entity Header Fields . . . . . . . . . . . . . . . . . . 46
7.2 Entity Body .................................................43 7.2. Entity Body . . . . . . . . . . . . . . . . . . . . . . 46
7.2.1 Type .....................................................43 7.2.1. Type . . . . . . . . . . . . . . . . . . . . . . . . 46
7.2.2 Entity Length ............................................43 7.2.2. Entity Length . . . . . . . . . . . . . . . . . . . 47
8 Connections ...................................................44 8. Connections . . . . . . . . . . . . . . . . . . . . . . . . . 47
8.1 Persistent Connections ......................................44 8.1. Persistent Connections . . . . . . . . . . . . . . . . . 47
8.1.1 Purpose ..................................................44 8.1.1. Purpose . . . . . . . . . . . . . . . . . . . . . . 47
8.1.2 Overall Operation ........................................45 8.1.2. Overall Operation . . . . . . . . . . . . . . . . . 48
8.1.3 Proxy Servers ............................................46 8.1.3. Proxy Servers . . . . . . . . . . . . . . . . . . . 49
8.1.4 Practical Considerations .................................46 8.1.4. Practical Considerations . . . . . . . . . . . . . . 50
8.2 Message Transmission Requirements ...........................47 8.2. Message Transmission Requirements . . . . . . . . . . . 51
8.2.1 Persistent Connections and Flow Control ..................47 8.2.1. Persistent Connections and Flow Control . . . . . . 51
8.2.2 Monitoring Connections for Error Status Messages .........48 8.2.2. Monitoring Connections for Error Status Messages . . 51
8.2.3 Use of the 100 (Continue) Status .........................48 8.2.3. Use of the 100 (Continue) Status . . . . . . . . . . 51
8.2.4 Client Behavior if Server Prematurely Closes Connection ..50 8.2.4. Client Behavior if Server Prematurely Closes
9 Method Definitions ............................................51 Connection . . . . . . . . . . . . . . . . . . . . . 53
9.1 Safe and Idempotent Methods .................................51 9. Method Definitions . . . . . . . . . . . . . . . . . . . . . 54
9.1.1 Safe Methods .............................................51 9.1. Safe and Idempotent Methods . . . . . . . . . . . . . . 54
9.1.2 Idempotent Methods .......................................51 9.1.1. Safe Methods . . . . . . . . . . . . . . . . . . . . 54
9.2 OPTIONS .....................................................52 9.1.2. Idempotent Methods . . . . . . . . . . . . . . . . . 54
9.3 GET .........................................................53 9.2. OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . 55
9.4 HEAD ........................................................54 9.3. GET . . . . . . . . . . . . . . . . . . . . . . . . . . 56
9.5 POST ........................................................54 9.4. HEAD . . . . . . . . . . . . . . . . . . . . . . . . . . 57
9.6 PUT .........................................................55 9.5. POST . . . . . . . . . . . . . . . . . . . . . . . . . . 57
9.7 DELETE ......................................................56 9.6. PUT . . . . . . . . . . . . . . . . . . . . . . . . . . 58
9.8 TRACE .......................................................56 9.7. DELETE . . . . . . . . . . . . . . . . . . . . . . . . . 59
9.9 CONNECT .....................................................57 9.8. TRACE . . . . . . . . . . . . . . . . . . . . . . . . . 59
10 Status Code Definitions ......................................57 9.9. CONNECT . . . . . . . . . . . . . . . . . . . . . . . . 60
10.1 Informational 1xx ...........................................57 10. Status Code Definitions . . . . . . . . . . . . . . . . . . . 60
10.1.1 100 Continue .............................................58 10.1. Informational 1xx . . . . . . . . . . . . . . . . . . . 60
10.1.2 101 Switching Protocols ..................................58 10.1.1. 100 Continue . . . . . . . . . . . . . . . . . . . . 61
10.2 Successful 2xx ..............................................58 10.1.2. 101 Switching Protocols . . . . . . . . . . . . . . 61
10.2.1 200 OK ...................................................58 10.2. Successful 2xx . . . . . . . . . . . . . . . . . . . . . 61
10.2.2 201 Created ..............................................59 10.2.1. 200 OK . . . . . . . . . . . . . . . . . . . . . . . 61
10.2.3 202 Accepted .............................................59 10.2.2. 201 Created . . . . . . . . . . . . . . . . . . . . 62
10.2.4 203 Non-Authoritative Information ........................59 10.2.3. 202 Accepted . . . . . . . . . . . . . . . . . . . . 62
10.2.5 204 No Content ...........................................60 10.2.4. 203 Non-Authoritative Information . . . . . . . . . 62
10.2.6 205 Reset Content ........................................60 10.2.5. 204 No Content . . . . . . . . . . . . . . . . . . . 63
10.2.7 206 Partial Content ......................................60 10.2.6. 205 Reset Content . . . . . . . . . . . . . . . . . 63
10.3 Redirection 3xx .............................................61 10.2.7. 206 Partial Content . . . . . . . . . . . . . . . . 63
10.3.1 300 Multiple Choices .....................................61 10.3. Redirection 3xx . . . . . . . . . . . . . . . . . . . . 64
10.3.2 301 Moved Permanently ....................................62 10.3.1. 300 Multiple Choices . . . . . . . . . . . . . . . . 64
10.3.3 302 Found ................................................62 10.3.2. 301 Moved Permanently . . . . . . . . . . . . . . . 65
10.3.4 303 See Other ............................................63 10.3.3. 302 Found . . . . . . . . . . . . . . . . . . . . . 65
10.3.5 304 Not Modified .........................................63 10.3.4. 303 See Other . . . . . . . . . . . . . . . . . . . 66
10.3.6 305 Use Proxy ............................................64 10.3.5. 304 Not Modified . . . . . . . . . . . . . . . . . . 66
10.3.7 306 (Unused) .............................................64 10.3.6. 305 Use Proxy . . . . . . . . . . . . . . . . . . . 67
10.3.8 307 Temporary Redirect ...................................65 10.3.7. 306 (Unused) . . . . . . . . . . . . . . . . . . . . 67
10.4 Client Error 4xx ............................................65 10.3.8. 307 Temporary Redirect . . . . . . . . . . . . . . . 67
10.4.1 400 Bad Request .........................................65 10.4. Client Error 4xx . . . . . . . . . . . . . . . . . . . . 68
10.4.2 401 Unauthorized ........................................66 10.4.1. 400 Bad Request . . . . . . . . . . . . . . . . . . 68
10.4.3 402 Payment Required ....................................66 10.4.2. 401 Unauthorized . . . . . . . . . . . . . . . . . . 68
10.4.4 403 Forbidden ...........................................66 10.4.3. 402 Payment Required . . . . . . . . . . . . . . . . 69
10.4.5 404 Not Found ...........................................66 10.4.4. 403 Forbidden . . . . . . . . . . . . . . . . . . . 69
10.4.6 405 Method Not Allowed ..................................66 10.4.5. 404 Not Found . . . . . . . . . . . . . . . . . . . 69
10.4.7 406 Not Acceptable ......................................67 10.4.6. 405 Method Not Allowed . . . . . . . . . . . . . . . 69
10.4.8 407 Proxy Authentication Required .......................67 10.4.7. 406 Not Acceptable . . . . . . . . . . . . . . . . . 69
10.4.9 408 Request Timeout .....................................67 10.4.8. 407 Proxy Authentication Required . . . . . . . . . 70
10.4.10 409 Conflict ............................................67 10.4.9. 408 Request Timeout . . . . . . . . . . . . . . . . 70
10.4.11 410 Gone ................................................68 10.4.10. 409 Conflict . . . . . . . . . . . . . . . . . . . . 70
10.4.12 411 Length Required .....................................68 10.4.11. 410 Gone . . . . . . . . . . . . . . . . . . . . . . 71
10.4.13 412 Precondition Failed .................................68 10.4.12. 411 Length Required . . . . . . . . . . . . . . . . 71
10.4.14 413 Request Entity Too Large ............................69 10.4.13. 412 Precondition Failed . . . . . . . . . . . . . . 71
10.4.15 414 Request-URI Too Long ................................69 10.4.14. 413 Request Entity Too Large . . . . . . . . . . . . 71
10.4.16 415 Unsupported Media Type ..............................69 10.4.15. 414 Request-URI Too Long . . . . . . . . . . . . . . 72
10.4.17 416 Requested Range Not Satisfiable .....................69 10.4.16. 415 Unsupported Media Type . . . . . . . . . . . . . 72
10.4.18 417 Expectation Failed ..................................70 10.4.17. 416 Requested Range Not Satisfiable . . . . . . . . 72
10.5 Server Error 5xx ............................................70 10.4.18. 417 Expectation Failed . . . . . . . . . . . . . . . 72
10.5.1 500 Internal Server Error ................................70 10.5. Server Error 5xx . . . . . . . . . . . . . . . . . . . . 72
10.5.2 501 Not Implemented ......................................70 10.5.1. 500 Internal Server Error . . . . . . . . . . . . . 73
10.5.3 502 Bad Gateway ..........................................70 10.5.2. 501 Not Implemented . . . . . . . . . . . . . . . . 73
10.5.4 503 Service Unavailable ..................................70 10.5.3. 502 Bad Gateway . . . . . . . . . . . . . . . . . . 73
10.5.5 504 Gateway Timeout ......................................71 10.5.4. 503 Service Unavailable . . . . . . . . . . . . . . 73
10.5.6 505 HTTP Version Not Supported ...........................71 10.5.5. 504 Gateway Timeout . . . . . . . . . . . . . . . . 73
11 Access Authentication ........................................71 10.5.6. 505 HTTP Version Not Supported . . . . . . . . . . . 74
12 Content Negotiation ..........................................71 11. Access Authentication . . . . . . . . . . . . . . . . . . . . 74
12.1 Server-driven Negotiation ...................................72 12. Content Negotiation . . . . . . . . . . . . . . . . . . . . . 74
12.2 Agent-driven Negotiation ....................................73 12.1. Server-driven Negotiation . . . . . . . . . . . . . . . 75
12.3 Transparent Negotiation .....................................74 12.2. Agent-driven Negotiation . . . . . . . . . . . . . . . . 76
13 Caching in HTTP ..............................................74 12.3. Transparent Negotiation . . . . . . . . . . . . . . . . 76
13.1.1 Cache Correctness ........................................75 13. Caching in HTTP . . . . . . . . . . . . . . . . . . . . . . . 77
13.1.2 Warnings .................................................76 13.1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
13.1.3 Cache-control Mechanisms .................................77 13.1.1. Cache Correctness . . . . . . . . . . . . . . . . . 78
13.1.4 Explicit User Agent Warnings .............................78 13.1.2. Warnings . . . . . . . . . . . . . . . . . . . . . . 79
13.1.5 Exceptions to the Rules and Warnings .....................78 13.1.3. Cache-control Mechanisms . . . . . . . . . . . . . . 80
13.1.6 Client-controlled Behavior ...............................79 13.1.4. Explicit User Agent Warnings . . . . . . . . . . . . 80
13.2 Expiration Model ............................................79 13.1.5. Exceptions to the Rules and Warnings . . . . . . . . 81
13.2.1 Server-Specified Expiration ..............................79 13.1.6. Client-controlled Behavior . . . . . . . . . . . . . 81
13.2.2 Heuristic Expiration .....................................80 13.2. Expiration Model . . . . . . . . . . . . . . . . . . . . 82
13.2.3 Age Calculations .........................................80 13.2.1. Server-Specified Expiration . . . . . . . . . . . . 82
13.2.4 Expiration Calculations ..................................83 13.2.2. Heuristic Expiration . . . . . . . . . . . . . . . . 83
13.2.5 Disambiguating Expiration Values .........................84 13.2.3. Age Calculations . . . . . . . . . . . . . . . . . . 83
13.2.6 Disambiguating Multiple Responses ........................84 13.2.4. Expiration Calculations . . . . . . . . . . . . . . 85
13.3 Validation Model ............................................85 13.2.5. Disambiguating Expiration Values . . . . . . . . . . 86
13.3.1 Last-Modified Dates ......................................86 13.2.6. Disambiguating Multiple Responses . . . . . . . . . 87
13.3.2 Entity Tag Cache Validators ..............................86 13.3. Validation Model . . . . . . . . . . . . . . . . . . . . 87
13.3.3 Weak and Strong Validators ...............................86 13.3.1. Last-Modified Dates . . . . . . . . . . . . . . . . 88
13.3.4 Rules for When to Use Entity Tags and Last-Modified Dates.89 13.3.2. Entity Tag Cache Validators . . . . . . . . . . . . 88
13.3.5 Non-validating Conditionals ..............................90 13.3.3. Weak and Strong Validators . . . . . . . . . . . . . 89
13.4 Response Cacheability .......................................91 13.3.4. Rules for When to Use Entity Tags and
13.5 Constructing Responses From Caches ..........................92 Last-Modified Dates . . . . . . . . . . . . . . . . 91
13.5.1 End-to-end and Hop-by-hop Headers ........................92 13.3.5. Non-validating Conditionals . . . . . . . . . . . . 93
13.5.2 Non-modifiable Headers ...................................92 13.4. Response Cacheability . . . . . . . . . . . . . . . . . 93
13.5.3 Combining Headers ........................................94 13.5. Constructing Responses From Caches . . . . . . . . . . . 94
13.5.4 Combining Byte Ranges ....................................95 13.5.1. End-to-end and Hop-by-hop Headers . . . . . . . . . 94
13.6 Caching Negotiated Responses ................................95 13.5.2. Non-modifiable Headers . . . . . . . . . . . . . . . 95
13.7 Shared and Non-Shared Caches ................................96 13.5.3. Combining Headers . . . . . . . . . . . . . . . . . 96
13.8 Errors or Incomplete Response Cache Behavior ................97 13.5.4. Combining Byte Ranges . . . . . . . . . . . . . . . 97
13.9 Side Effects of GET and HEAD ................................97 13.6. Caching Negotiated Responses . . . . . . . . . . . . . . 98
13.10 Invalidation After Updates or Deletions ...................97 13.7. Shared and Non-Shared Caches . . . . . . . . . . . . . . 99
13.11 Write-Through Mandatory ...................................98 13.8. Errors or Incomplete Response Cache Behavior . . . . . . 99
13.12 Cache Replacement .........................................99 13.9. Side Effects of GET and HEAD . . . . . . . . . . . . . . 100
13.13 History Lists .............................................99 13.10. Invalidation After Updates or Deletions . . . . . . . . 100
14 Header Field Definitions ....................................100 13.11. Write-Through Mandatory . . . . . . . . . . . . . . . . 101
14.1 Accept .....................................................100 13.12. Cache Replacement . . . . . . . . . . . . . . . . . . . 101
14.2 Accept-Charset .............................................102 13.13. History Lists . . . . . . . . . . . . . . . . . . . . . 102
14.3 Accept-Encoding ............................................102 14. Header Field Definitions . . . . . . . . . . . . . . . . . . 102
14.4 Accept-Language ............................................104 14.1. Accept . . . . . . . . . . . . . . . . . . . . . . . . . 102
14.5 Accept-Ranges ..............................................105 14.2. Accept-Charset . . . . . . . . . . . . . . . . . . . . . 104
14.6 Age ........................................................106 14.3. Accept-Encoding . . . . . . . . . . . . . . . . . . . . 105
14.7 Allow ......................................................106 14.4. Accept-Language . . . . . . . . . . . . . . . . . . . . 106
14.8 Authorization ..............................................107 14.5. Accept-Ranges . . . . . . . . . . . . . . . . . . . . . 108
14.9 Cache-Control ..............................................108 14.6. Age . . . . . . . . . . . . . . . . . . . . . . . . . . 108
14.9.1 What is Cacheable .......................................109 14.7. Allow . . . . . . . . . . . . . . . . . . . . . . . . . 109
14.9.2 What May be Stored by Caches ............................110 14.8. Authorization . . . . . . . . . . . . . . . . . . . . . 109
14.9.3 Modifications of the Basic Expiration Mechanism .........111 14.9. Cache-Control . . . . . . . . . . . . . . . . . . . . . 110
14.9.4 Cache Revalidation and Reload Controls ..................113 14.9.1. What is Cacheable . . . . . . . . . . . . . . . . . 112
14.9.5 No-Transform Directive ..................................115 14.9.2. What May be Stored by Caches . . . . . . . . . . . . 113
14.9.6 Cache Control Extensions ................................116 14.9.3. Modifications of the Basic Expiration Mechanism . . 113
14.10 Connection ...............................................117 14.9.4. Cache Revalidation and Reload Controls . . . . . . . 115
14.11 Content-Encoding .........................................118 14.9.5. No-Transform Directive . . . . . . . . . . . . . . . 118
14.12 Content-Language .........................................118 14.9.6. Cache Control Extensions . . . . . . . . . . . . . . 119
14.13 Content-Length ...........................................119 14.10. Connection . . . . . . . . . . . . . . . . . . . . . . . 119
14.14 Content-Location .........................................120 14.11. Content-Encoding . . . . . . . . . . . . . . . . . . . . 120
14.15 Content-MD5 ..............................................121 14.12. Content-Language . . . . . . . . . . . . . . . . . . . . 121
14.16 Content-Range ............................................122 14.13. Content-Length . . . . . . . . . . . . . . . . . . . . . 122
14.17 Content-Type .............................................124 14.14. Content-Location . . . . . . . . . . . . . . . . . . . . 123
14.18 Date .....................................................124 14.15. Content-MD5 . . . . . . . . . . . . . . . . . . . . . . 123
14.18.1 Clockless Origin Server Operation ......................125 14.16. Content-Range . . . . . . . . . . . . . . . . . . . . . 125
14.19 ETag .....................................................126 14.17. Content-Type . . . . . . . . . . . . . . . . . . . . . . 127
14.20 Expect ...................................................126 14.18. Date . . . . . . . . . . . . . . . . . . . . . . . . . . 127
14.21 Expires ..................................................127 14.18.1. Clockless Origin Server Operation . . . . . . . . . 128
14.22 From .....................................................128 14.19. ETag . . . . . . . . . . . . . . . . . . . . . . . . . . 128
14.23 Host .....................................................128 14.20. Expect . . . . . . . . . . . . . . . . . . . . . . . . . 129
14.24 If-Match .................................................129 14.21. Expires . . . . . . . . . . . . . . . . . . . . . . . . 130
14.25 If-Modified-Since ........................................130 14.22. From . . . . . . . . . . . . . . . . . . . . . . . . . . 131
14.26 If-None-Match ............................................132 14.23. Host . . . . . . . . . . . . . . . . . . . . . . . . . . 131
14.27 If-Range .................................................133 14.24. If-Match . . . . . . . . . . . . . . . . . . . . . . . . 132
14.28 If-Unmodified-Since ......................................134 14.25. If-Modified-Since . . . . . . . . . . . . . . . . . . . 133
14.29 Last-Modified ............................................134 14.26. If-None-Match . . . . . . . . . . . . . . . . . . . . . 135
14.30 Location .................................................135 14.27. If-Range . . . . . . . . . . . . . . . . . . . . . . . . 136
14.31 Max-Forwards .............................................136 14.28. If-Unmodified-Since . . . . . . . . . . . . . . . . . . 137
14.32 Pragma ...................................................136 14.29. Last-Modified . . . . . . . . . . . . . . . . . . . . . 137
14.33 Proxy-Authenticate .......................................137 14.30. Location . . . . . . . . . . . . . . . . . . . . . . . . 138
14.34 Proxy-Authorization ......................................137 14.31. Max-Forwards . . . . . . . . . . . . . . . . . . . . . . 138
14.35 Range ....................................................138 14.32. Pragma . . . . . . . . . . . . . . . . . . . . . . . . . 139
14.35.1 Byte Ranges ...........................................138 14.33. Proxy-Authenticate . . . . . . . . . . . . . . . . . . . 140
14.35.2 Range Retrieval Requests ..............................139 14.34. Proxy-Authorization . . . . . . . . . . . . . . . . . . 140
14.36 Referer ..................................................140 14.35. Range . . . . . . . . . . . . . . . . . . . . . . . . . 140
14.37 Retry-After ..............................................141 14.35.1. Byte Ranges . . . . . . . . . . . . . . . . . . . . 140
14.38 Server ...................................................141 14.35.2. Range Retrieval Requests . . . . . . . . . . . . . . 142
14.39 TE .......................................................142 14.36. Referer . . . . . . . . . . . . . . . . . . . . . . . . 143
14.40 Trailer ..................................................143 14.37. Retry-After . . . . . . . . . . . . . . . . . . . . . . 143
14.41 Transfer-Encoding..........................................143 14.38. Server . . . . . . . . . . . . . . . . . . . . . . . . . 144
14.42 Upgrade ..................................................144 14.39. TE . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
14.43 User-Agent ...............................................145 14.40. Trailer . . . . . . . . . . . . . . . . . . . . . . . . 145
14.44 Vary .....................................................145 14.41. Transfer-Encoding . . . . . . . . . . . . . . . . . . . 146
14.45 Via ......................................................146 14.42. Upgrade . . . . . . . . . . . . . . . . . . . . . . . . 146
14.46 Warning ..................................................148 14.43. User-Agent . . . . . . . . . . . . . . . . . . . . . . . 148
14.47 WWW-Authenticate .........................................150 14.44. Vary . . . . . . . . . . . . . . . . . . . . . . . . . . 148
15 Security Considerations .......................................150 14.45. Via . . . . . . . . . . . . . . . . . . . . . . . . . . 149
15.1 Personal Information....................................151 14.46. Warning . . . . . . . . . . . . . . . . . . . . . . . . 150
15.1.1 Abuse of Server Log Information .........................151 14.47. WWW-Authenticate . . . . . . . . . . . . . . . . . . . . 153
15.1.2 Transfer of Sensitive Information .......................151 15. Security Considerations . . . . . . . . . . . . . . . . . . . 153
15.1.3 Encoding Sensitive Information in URI's .................152 15.1. Personal Information . . . . . . . . . . . . . . . . . . 153
15.1.4 Privacy Issues Connected to Accept Headers ..............152 15.1.1. Abuse of Server Log Information . . . . . . . . . . 154
15.2 Attacks Based On File and Path Names .......................153 15.1.2. Transfer of Sensitive Information . . . . . . . . . 154
15.3 DNS Spoofing ...............................................154 15.1.3. Encoding Sensitive Information in URI's . . . . . . 155
15.4 Location Headers and Spoofing ..............................154 15.1.4. Privacy Issues Connected to Accept Headers . . . . . 155
15.5 Content-Disposition Issues .................................154 15.2. Attacks Based On File and Path Names . . . . . . . . . . 156
15.6 Authentication Credentials and Idle Clients ................155 15.3. DNS Spoofing . . . . . . . . . . . . . . . . . . . . . . 156
15.7 Proxies and Caching ........................................155 15.4. Location Headers and Spoofing . . . . . . . . . . . . . 157
15.7.1 Denial of Service Attacks on Proxies....................156 15.5. Content-Disposition Issues . . . . . . . . . . . . . . . 157
16 Acknowledgments .............................................156 15.6. Authentication Credentials and Idle Clients . . . . . . 157
17 References ..................................................158 15.7. Proxies and Caching . . . . . . . . . . . . . . . . . . 158
18 Authors' Addresses ..........................................162 15.7.1. Denial of Service Attacks on Proxies . . . . . . . . 159
19 Appendices ..................................................164 16. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 159
19.1 Internet Media Type message/http and application/http ......164 17. References . . . . . . . . . . . . . . . . . . . . . . . . . 161
19.2 Internet Media Type multipart/byteranges ...................165 Appendix A. Appendices . . . . . . . . . . . . . . . . . . . . . 165
19.3 Tolerant Applications ......................................166 A.1. Internet Media Type message/http and application/http . 165
19.4 Differences Between HTTP Entities and RFC 2045 Entities ....167 A.2. Internet Media Type multipart/byteranges . . . . . . . . 166
19.4.1 MIME-Version ............................................167 A.3. Tolerant Applications . . . . . . . . . . . . . . . . . 167
19.4.2 Conversion to Canonical Form ............................167 A.4. Differences Between HTTP Entities and RFC 2045
19.4.3 Conversion of Date Formats ..............................168 Entities . . . . . . . . . . . . . . . . . . . . . . . . 168
19.4.4 Introduction of Content-Encoding ........................168 A.4.1. MIME-Version . . . . . . . . . . . . . . . . . . . . 169
19.4.5 No Content-Transfer-Encoding ............................168 A.4.2. Conversion to Canonical Form . . . . . . . . . . . . 169
19.4.6 Introduction of Transfer-Encoding .......................169 A.4.3. Conversion of Date Formats . . . . . . . . . . . . . 169
19.4.7 MHTML and Line Length Limitations .......................169 A.4.4. Introduction of Content-Encoding . . . . . . . . . . 170
19.5 Additional Features ........................................169 A.4.5. No Content-Transfer-Encoding . . . . . . . . . . . . 170
19.5.1 Content-Disposition .....................................170 A.4.6. Introduction of Transfer-Encoding . . . . . . . . . 170
19.6 Compatibility with Previous Versions .......................170 A.4.7. MHTML and Line Length Limitations . . . . . . . . . 171
19.6.1 Changes from HTTP/1.0 ...................................171 A.5. Additional Features . . . . . . . . . . . . . . . . . . 171
19.6.2 Compatibility with HTTP/1.0 Persistent Connections ......172 A.5.1. Content-Disposition . . . . . . . . . . . . . . . . 171
19.6.3 Changes from RFC 2068 ...................................172 A.6. Compatibility with Previous Versions . . . . . . . . . . 172
20 Index .......................................................175 A.6.1. Changes from HTTP/1.0 . . . . . . . . . . . . . . . 173
21 Full Copyright Statement ....................................176 A.6.2. Compatibility with HTTP/1.0 Persistent Connections . 174
A.6.3. Changes from RFC 2068 . . . . . . . . . . . . . . . 174
Appendix B. Index . . . . . . . . . . . . . . . . . . . . . . . 177
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 188
Intellectual Property and Copyright Statements . . . . . . . . . 190
1 Introduction 1. Introduction
1.1 Purpose 1.1. Purpose
The Hypertext Transfer Protocol (HTTP) is an application-level The Hypertext Transfer Protocol (HTTP) is an application-level
protocol for distributed, collaborative, hypermedia information protocol for distributed, collaborative, hypermedia information
systems. HTTP has been in use by the World-Wide Web global systems. HTTP has been in use by the World-Wide Web global
information initiative since 1990. The first version of HTTP, information initiative since 1990. The first version of HTTP,
referred to as HTTP/0.9, was a simple protocol for raw data transfer referred to as HTTP/0.9, was a simple protocol for raw data transfer
across the Internet. HTTP/1.0, as defined by RFC 1945 [6], improved across the Internet. HTTP/1.0, as defined by RFC 1945 [RFC1945],
the protocol by allowing messages to be in the format of MIME-like improved the protocol by allowing messages to be in the format of
messages, containing metainformation about the data transferred and MIME-like messages, containing metainformation about the data
modifiers on the request/response semantics. However, HTTP/1.0 does transferred and modifiers on the request/response semantics.
not sufficiently take into consideration the effects of hierarchical However, HTTP/1.0 does not sufficiently take into consideration the
proxies, caching, the need for persistent connections, or virtual effects of hierarchical proxies, caching, the need for persistent
hosts. In addition, the proliferation of incompletely-implemented connections, or virtual hosts. In addition, the proliferation of
applications calling themselves "HTTP/1.0" has necessitated a incompletely-implemented applications calling themselves "HTTP/1.0"
protocol version change in order for two communicating applications has necessitated a protocol version change in order for two
to determine each other's true capabilities. communicating applications to determine each other's true
capabilities.
This specification defines the protocol referred to as "HTTP/1.1". This specification defines the protocol referred to as "HTTP/1.1".
This protocol includes more stringent requirements than HTTP/1.0 in This protocol includes more stringent requirements than HTTP/1.0 in
order to ensure reliable implementation of its features. order to ensure reliable implementation of its features.
Practical information systems require more functionality than simple Practical information systems require more functionality than simple
retrieval, including search, front-end update, and annotation. HTTP retrieval, including search, front-end update, and annotation. HTTP
allows an open-ended set of methods and headers that indicate the allows an open-ended set of methods and headers that indicate the
purpose of a request [47]. It builds on the discipline of reference purpose of a request [RFC2324]. It builds on the discipline of
provided by the Uniform Resource Identifier (URI) [3], as a location reference provided by the Uniform Resource Identifier (URI)
(URL) [4] or name (URN) [20], for indicating the resource to which a [RFC1630], as a location (URL) [RFC1738] or name (URN) [RFC1737], for
method is to be applied. Messages are passed in a format similar to indicating the resource to which a method is to be applied. Messages
that used by Internet mail [9] as defined by the Multipurpose are passed in a format similar to that used by Internet mail [RFC822]
Internet Mail Extensions (MIME) [7]. as defined by the Multipurpose Internet Mail Extensions (MIME)
[RFC2045].
HTTP is also used as a generic protocol for communication between HTTP is also used as a generic protocol for communication between
user agents and proxies/gateways to other Internet systems, including user agents and proxies/gateways to other Internet systems, including
those supported by the SMTP [16], NNTP [13], FTP [18], Gopher [2], those supported by the SMTP [RFC821], NNTP [RFC977], FTP [RFC959],
and WAIS [10] protocols. In this way, HTTP allows basic hypermedia Gopher [RFC1436], and WAIS [WAIS] protocols. In this way, HTTP
access to resources available from diverse applications. allows basic hypermedia access to resources available from diverse
applications.
1.2 Requirements 1.2. Requirements
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [34]. document are to be interpreted as described in RFC 2119 [RFC2119].
An implementation is not compliant if it fails to satisfy one or more An implementation is not compliant if it fails to satisfy one or more
of the MUST or REQUIRED level requirements for the protocols it of the MUST or REQUIRED level requirements for the protocols it
implements. An implementation that satisfies all the MUST or REQUIRED implements. An implementation that satisfies all the MUST or
level and all the SHOULD level requirements for its protocols is said REQUIRED level and all the SHOULD level requirements for its
to be "unconditionally compliant"; one that satisfies all the MUST protocols is said to be "unconditionally compliant"; one that
level requirements but not all the SHOULD level requirements for its satisfies all the MUST level requirements but not all the SHOULD
protocols is said to be "conditionally compliant." level requirements for its protocols is said to be "conditionally
compliant."
1.3 Terminology 1.3. Terminology
This specification uses a number of terms to refer to the roles This specification uses a number of terms to refer to the roles
played by participants in, and objects of, the HTTP communication. played by participants in, and objects of, the HTTP communication.
connection connection
A transport layer virtual circuit established between two programs A transport layer virtual circuit established between two programs
for the purpose of communication. for the purpose of communication.
message message
The basic unit of HTTP communication, consisting of a structured The basic unit of HTTP communication, consisting of a structured
sequence of octets matching the syntax defined in section 4 and sequence of octets matching the syntax defined in Section 4 and
transmitted via the connection. transmitted via the connection.
request request
An HTTP request message, as defined in section 5.
An HTTP request message, as defined in Section 5.
response response
An HTTP response message, as defined in section 6.
An HTTP response message, as defined in Section 6.
resource resource
A network data object or service that can be identified by a URI, A network data object or service that can be identified by a URI,
as defined in section 3.2. Resources may be available in multiple as defined in Section 3.2. Resources may be available in multiple
representations (e.g. multiple languages, data formats, size, and representations (e.g. multiple languages, data formats, size, and
resolutions) or vary in other ways. resolutions) or vary in other ways.
entity entity
The information transferred as the payload of a request or The information transferred as the payload of a request or
response. An entity consists of metainformation in the form of response. An entity consists of metainformation in the form of
entity-header fields and content in the form of an entity-body, as entity-header fields and content in the form of an entity-body, as
described in section 7. described in Section 7.
representation representation
An entity included with a response that is subject to content An entity included with a response that is subject to content
negotiation, as described in section 12. There may exist multiple negotiation, as described in Section 12. There may exist multiple
representations associated with a particular response status. representations associated with a particular response status.
content negotiation content negotiation
The mechanism for selecting the appropriate representation when The mechanism for selecting the appropriate representation when
servicing a request, as described in section 12. The servicing a request, as described in Section 12. The
representation of entities in any response can be negotiated representation of entities in any response can be negotiated
(including error responses). (including error responses).
variant variant
A resource may have one, or more than one, representation(s) A resource may have one, or more than one, representation(s)
associated with it at any given instant. Each of these associated with it at any given instant. Each of these
representations is termed a `varriant'. Use of the term `variant' representations is termed a `varriant'. Use of the term `variant'
does not necessarily imply that the resource is subject to content does not necessarily imply that the resource is subject to content
negotiation. negotiation.
client client
A program that establishes connections for the purpose of sending A program that establishes connections for the purpose of sending
requests. requests.
user agent user agent
The client which initiates a request. These are often browsers, The client which initiates a request. These are often browsers,
editors, spiders (web-traversing robots), or other end user tools. editors, spiders (web-traversing robots), or other end user tools.
server server
An application program that accepts connections in order to An application program that accepts connections in order to
service requests by sending back responses. Any given program may service requests by sending back responses. Any given program may
be capable of being both a client and a server; our use of these be capable of being both a client and a server; our use of these
terms refers only to the role being performed by the program for a terms refers only to the role being performed by the program for a
particular connection, rather than to the program's capabilities particular connection, rather than to the program's capabilities
in general. Likewise, any server may act as an origin server, in general. Likewise, any server may act as an origin server,
proxy, gateway, or tunnel, switching behavior based on the nature proxy, gateway, or tunnel, switching behavior based on the nature
of each request. of each request.
origin server origin server
skipping to change at page 10, line 6 skipping to change at page 11, line 45
An application program that accepts connections in order to An application program that accepts connections in order to
service requests by sending back responses. Any given program may service requests by sending back responses. Any given program may
be capable of being both a client and a server; our use of these be capable of being both a client and a server; our use of these
terms refers only to the role being performed by the program for a terms refers only to the role being performed by the program for a
particular connection, rather than to the program's capabilities particular connection, rather than to the program's capabilities
in general. Likewise, any server may act as an origin server, in general. Likewise, any server may act as an origin server,
proxy, gateway, or tunnel, switching behavior based on the nature proxy, gateway, or tunnel, switching behavior based on the nature
of each request. of each request.
origin server origin server
The server on which a given resource resides or is to be created. The server on which a given resource resides or is to be created.
proxy proxy
An intermediary program which acts as both a server and a client An intermediary program which acts as both a server and a client
for the purpose of making requests on behalf of other clients. for the purpose of making requests on behalf of other clients.
Requests are serviced internally or by passing them on, with Requests are serviced internally or by passing them on, with
possible translation, to other servers. A proxy MUST implement possible translation, to other servers. A proxy MUST implement
both the client and server requirements of this specification. A both the client and server requirements of this specification. A
"transparent proxy" is a proxy that does not modify the request or "transparent proxy" is a proxy that does not modify the request or
response beyond what is required for proxy authentication and response beyond what is required for proxy authentication and
identification. A "non-transparent proxy" is a proxy that modifies identification. A "non-transparent proxy" is a proxy that
the request or response in order to provide some added service to modifies the request or response in order to provide some added
the user agent, such as group annotation services, media type service to the user agent, such as group annotation services,
transformation, protocol reduction, or anonymity filtering. Except media type transformation, protocol reduction, or anonymity
where either transparent or non-transparent behavior is explicitly filtering. Except where either transparent or non-transparent
stated, the HTTP proxy requirements apply to both types of behavior is explicitly stated, the HTTP proxy requirements apply
proxies. to both types of proxies.
gateway gateway
A server which acts as an intermediary for some other server. A server which acts as an intermediary for some other server.
Unlike a proxy, a gateway receives requests as if it were the Unlike a proxy, a gateway receives requests as if it were the
origin server for the requested resource; the requesting client origin server for the requested resource; the requesting client
may not be aware that it is communicating with a gateway. may not be aware that it is communicating with a gateway.
tunnel tunnel
An intermediary program which is acting as a blind relay between An intermediary program which is acting as a blind relay between
two connections. Once active, a tunnel is not considered a party two connections. Once active, a tunnel is not considered a party
to the HTTP communication, though the tunnel may have been to the HTTP communication, though the tunnel may have been
initiated by an HTTP request. The tunnel ceases to exist when both initiated by an HTTP request. The tunnel ceases to exist when
ends of the relayed connections are closed. both ends of the relayed connections are closed.
cache cache
A program's local store of response messages and the subsystem A program's local store of response messages and the subsystem
that controls its message storage, retrieval, and deletion. A that controls its message storage, retrieval, and deletion. A
cache stores cacheable responses in order to reduce the response cache stores cacheable responses in order to reduce the response
time and network bandwidth consumption on future, equivalent time and network bandwidth consumption on future, equivalent
requests. Any client or server may include a cache, though a cache requests. Any client or server may include a cache, though a
cannot be used by a server that is acting as a tunnel. cache cannot be used by a server that is acting as a tunnel.
cacheable cacheable
A response is cacheable if a cache is allowed to store a copy of A response is cacheable if a cache is allowed to store a copy of
the response message for use in answering subsequent requests. The the response message for use in answering subsequent requests.
rules for determining the cacheability of HTTP responses are The rules for determining the cacheability of HTTP responses are
defined in section 13. Even if a resource is cacheable, there may defined in Section 13. Even if a resource is cacheable, there may
be additional constraints on whether a cache can use the cached be additional constraints on whether a cache can use the cached
copy for a particular request. copy for a particular request.
first-hand first-hand
A response is first-hand if it comes directly and without A response is first-hand if it comes directly and without
unnecessary delay from the origin server, perhaps via one or more unnecessary delay from the origin server, perhaps via one or more
proxies. A response is also first-hand if its validity has just proxies. A response is also first-hand if its validity has just
been checked directly with the origin server. been checked directly with the origin server.
explicit expiration time explicit expiration time
skipping to change at page 11, line 12 skipping to change at page 13, line 10
be additional constraints on whether a cache can use the cached be additional constraints on whether a cache can use the cached
copy for a particular request. copy for a particular request.
first-hand first-hand
A response is first-hand if it comes directly and without A response is first-hand if it comes directly and without
unnecessary delay from the origin server, perhaps via one or more unnecessary delay from the origin server, perhaps via one or more
proxies. A response is also first-hand if its validity has just proxies. A response is also first-hand if its validity has just
been checked directly with the origin server. been checked directly with the origin server.
explicit expiration time explicit expiration time
The time at which the origin server intends that an entity should The time at which the origin server intends that an entity should
no longer be returned by a cache without further validation. no longer be returned by a cache without further validation.
heuristic expiration time heuristic expiration time
An expiration time assigned by a cache when no explicit expiration An expiration time assigned by a cache when no explicit expiration
time is available. time is available.
age age
The age of a response is the time since it was sent by, or The age of a response is the time since it was sent by, or
successfully validated with, the origin server. successfully validated with, the origin server.
freshness lifetime freshness lifetime
The length of time between the generation of a response and its The length of time between the generation of a response and its
expiration time. expiration time.
fresh fresh
A response is fresh if its age has not yet exceeded its freshness A response is fresh if its age has not yet exceeded its freshness
lifetime. lifetime.
stale stale
A response is stale if its age has passed its freshness lifetime. A response is stale if its age has passed its freshness lifetime.
semantically transparent semantically transparent
A cache behaves in a "semantically transparent" manner, with A cache behaves in a "semantically transparent" manner, with
respect to a particular response, when its use affects neither the respect to a particular response, when its use affects neither the
requesting client nor the origin server, except to improve requesting client nor the origin server, except to improve
performance. When a cache is semantically transparent, the client performance. When a cache is semantically transparent, the client
receives exactly the same response (except for hop-by-hop headers) receives exactly the same response (except for hop-by-hop headers)
that it would have received had its request been handled directly that it would have received had its request been handled directly
by the origin server. by the origin server.
validator validator
A protocol element (e.g., an entity tag or a Last-Modified time) A protocol element (e.g., an entity tag or a Last-Modified time)
that is used to find out whether a cache entry is an equivalent that is used to find out whether a cache entry is an equivalent
copy of an entity. copy of an entity.
upstream/downstream upstream/downstream
Upstream and downstream describe the flow of a message: all Upstream and downstream describe the flow of a message: all
messages flow from upstream to downstream. messages flow from upstream to downstream.
inbound/outbound inbound/outbound
Inbound and outbound refer to the request and response paths for Inbound and outbound refer to the request and response paths for
messages: "inbound" means "traveling toward the origin server", messages: "inbound" means "traveling toward the origin server",
and "outbound" means "traveling toward the user agent" and "outbound" means "traveling toward the user agent"
1.4 Overall Operation 1.4. Overall Operation
The HTTP protocol is a request/response protocol. A client sends a The HTTP protocol is a request/response protocol. A client sends a
request to the server in the form of a request method, URI, and request to the server in the form of a request method, URI, and
protocol version, followed by a MIME-like message containing request protocol version, followed by a MIME-like message containing request
modifiers, client information, and possible body content over a modifiers, client information, and possible body content over a
connection with a server. The server responds with a status line, connection with a server. The server responds with a status line,
including the message's protocol version and a success or error code, including the message's protocol version and a success or error code,
followed by a MIME-like message containing server information, entity followed by a MIME-like message containing server information, entity
metainformation, and possible entity-body content. The relationship metainformation, and possible entity-body content. The relationship
between HTTP and MIME is described in appendix 19.4. between HTTP and MIME is described in Appendix A.4.
Most HTTP communication is initiated by a user agent and consists of Most HTTP communication is initiated by a user agent and consists of
a request to be applied to a resource on some origin server. In the a request to be applied to a resource on some origin server. In the
simplest case, this may be accomplished via a single connection (v) simplest case, this may be accomplished via a single connection (v)
between the user agent (UA) and the origin server (O). between the user agent (UA) and the origin server (O).
request chain ------------------------> request chain ------------------------>
UA -------------------v------------------- O UA -------------------v------------------- O
<----------------------- response chain <----------------------- response chain
skipping to change at page 13, line 6 skipping to change at page 15, line 15
request chain --------------------------------------> request chain -------------------------------------->
UA -----v----- A -----v----- B -----v----- C -----v----- O UA -----v----- A -----v----- B -----v----- C -----v----- O
<------------------------------------- response chain <------------------------------------- response chain
The figure above shows three intermediaries (A, B, and C) between the The figure above shows three intermediaries (A, B, and C) between the
user agent and origin server. A request or response message that user agent and origin server. A request or response message that
travels the whole chain will pass through four separate connections. travels the whole chain will pass through four separate connections.
This distinction is important because some HTTP communication options This distinction is important because some HTTP communication options
may apply only to the connection with the nearest, non-tunnel may apply only to the connection with the nearest, non-tunnel
neighbor, only to the end-points of the chain, or to all connections neighbor, only to the end-points of the chain, or to all connections
along the chain. Although the diagram is linear, each participant may along the chain. Although the diagram is linear, each participant
be engaged in multiple, simultaneous communications. For example, B may be engaged in multiple, simultaneous communications. For
may be receiving requests from many clients other than A, and/or example, B may be receiving requests from many clients other than A,
forwarding requests to servers other than C, at the same time that it and/or forwarding requests to servers other than C, at the same time
is handling A's request. that it is handling A's request.
Any party to the communication which is not acting as a tunnel may Any party to the communication which is not acting as a tunnel may
employ an internal cache for handling requests. The effect of a cache employ an internal cache for handling requests. The effect of a
is that the request/response chain is shortened if one of the cache is that the request/response chain is shortened if one of the
participants along the chain has a cached response applicable to that participants along the chain has a cached response applicable to that
request. The following illustrates the resulting chain if B has a request. The following illustrates the resulting chain if B has a
cached copy of an earlier response from O (via C) for a request which cached copy of an earlier response from O (via C) for a request which
has not been cached by UA or A. has not been cached by UA or A.
request chain ----------> request chain ---------->
UA -----v----- A -----v----- B - - - - - - C - - - - - - O UA -----v----- A -----v----- B - - - - - - C - - - - - - O
<--------- response chain <--------- response chain
Not all responses are usefully cacheable, and some requests may Not all responses are usefully cacheable, and some requests may
contain modifiers which place special requirements on cache behavior. contain modifiers which place special requirements on cache behavior.
HTTP requirements for cache behavior and cacheable responses are HTTP requirements for cache behavior and cacheable responses are
defined in section 13. defined in Section 13.
In fact, there are a wide variety of architectures and configurations In fact, there are a wide variety of architectures and configurations
of caches and proxies currently being experimented with or deployed of caches and proxies currently being experimented with or deployed
across the World Wide Web. These systems include national hierarchies across the World Wide Web. These systems include national hierarchies
of proxy caches to save transoceanic bandwidth, systems that of proxy caches to save transoceanic bandwidth, systems that
broadcast or multicast cache entries, organizations that distribute broadcast or multicast cache entries, organizations that distribute
subsets of cached data via CD-ROM, and so on. HTTP systems are used subsets of cached data via CD-ROM, and so on. HTTP systems are used
in corporate intranets over high-bandwidth links, and for access via in corporate intranets over high-bandwidth links, and for access via
PDAs with low-power radio links and intermittent connectivity. The PDAs with low-power radio links and intermittent connectivity. The
goal of HTTP/1.1 is to support the wide diversity of configurations goal of HTTP/1.1 is to support the wide diversity of configurations
already deployed while introducing protocol constructs that meet the already deployed while introducing protocol constructs that meet the
needs of those who build web applications that require high needs of those who build web applications that require high
reliability and, failing that, at least reliable indications of reliability and, failing that, at least reliable indications of
failure. failure.
HTTP communication usually takes place over TCP/IP connections. The HTTP communication usually takes place over TCP/IP connections. The
default port is TCP 80 [19], but other ports can be used. This does default port is TCP 80 [RFC1700], but other ports can be used. This
not preclude HTTP from being implemented on top of any other protocol does not preclude HTTP from being implemented on top of any other
on the Internet, or on other networks. HTTP only presumes a reliable protocol on the Internet, or on other networks. HTTP only presumes a
transport; any protocol that provides such guarantees can be used; reliable transport; any protocol that provides such guarantees can be
the mapping of the HTTP/1.1 request and response structures onto the used; the mapping of the HTTP/1.1 request and response structures
transport data units of the protocol in question is outside the scope onto the transport data units of the protocol in question is outside
of this specification. the scope of this specification.
In HTTP/1.0, most implementations used a new connection for each In HTTP/1.0, most implementations used a new connection for each
request/response exchange. In HTTP/1.1, a connection may be used for request/response exchange. In HTTP/1.1, a connection may be used for
one or more request/response exchanges, although connections may be one or more request/response exchanges, although connections may be
closed for a variety of reasons (see section 8.1). closed for a variety of reasons (see Section 8.1).
2 Notational Conventions and Generic Grammar 2. Notational Conventions and Generic Grammar
2.1 Augmented BNF 2.1. Augmented BNF
All of the mechanisms specified in this document are described in All of the mechanisms specified in this document are described in
both prose and an augmented Backus-Naur Form (BNF) similar to that both prose and an augmented Backus-Naur Form (BNF) similar to that
used by RFC 822 [9]. Implementors will need to be familiar with the used by RFC 822 [RFC822]. Implementors will need to be familiar with
notation in order to understand this specification. The augmented BNF the notation in order to understand this specification. The
includes the following constructs: augmented BNF includes the following constructs:
name = definition name = definition
The name of a rule is simply the name itself (without any The name of a rule is simply the name itself (without any
enclosing "<" and ">") and is separated from its definition by the enclosing "<" and ">") and is separated from its definition by the
equal "=" character. White space is only significant in that equal "=" character. White space is only significant in that
indentation of continuation lines is used to indicate a rule indentation of continuation lines is used to indicate a rule
definition that spans more than one line. Certain basic rules are definition that spans more than one line. Certain basic rules are
in uppercase, such as SP, LWS, HT, CRLF, DIGIT, ALPHA, etc. Angle in uppercase, such as SP, LWS, HT, CRLF, DIGIT, ALPHA, etc. Angle
brackets are used within definitions whenever their presence will brackets are used within definitions whenever their presence will
facilitate discerning the use of rule names. facilitate discerning the use of rule names.
"literal" "literal"
skipping to change at page 15, line 36 skipping to change at page 18, line 10
"1#element" requires at least one; and "1#2element" allows one or "1#element" requires at least one; and "1#2element" allows one or
two. two.
; comment ; comment
A semi-colon, set off some distance to the right of rule text, A semi-colon, set off some distance to the right of rule text,
starts a comment that continues to the end of line. This is a starts a comment that continues to the end of line. This is a
simple way of including useful notes in parallel with the simple way of including useful notes in parallel with the
specifications. specifications.
implied *LWS implied *LWS
The grammar described by this specification is word-based. Except The grammar described by this specification is word-based. Except
where noted otherwise, linear white space (LWS) can be included where noted otherwise, linear white space (LWS) can be included
between any two adjacent words (token or quoted-string), and between any two adjacent words (token or quoted-string), and
between adjacent words and separators, without changing the between adjacent words and separators, without changing the
interpretation of a field. At least one delimiter (LWS and/or interpretation of a field. At least one delimiter (LWS and/or
separators) MUST exist between any two tokens (for the definition separators) MUST exist between any two tokens (for the definition
of "token" below), since they would otherwise be interpreted as a of "token" below), since they would otherwise be interpreted as a
single token. single token.
2.2 Basic Rules 2.2. Basic Rules
The following rules are used throughout this specification to The following rules are used throughout this specification to
describe basic parsing constructs. The US-ASCII coded character set describe basic parsing constructs. The US-ASCII coded character set
is defined by ANSI X3.4-1986 [21]. is defined by ANSI X3.4-1986 [USASCII].
OCTET = <any 8-bit sequence of data> OCTET = <any 8-bit sequence of data>
CHAR = <any US-ASCII character (octets 0 - 127)> CHAR = <any US-ASCII character (octets 0 - 127)>
UPALPHA = <any US-ASCII uppercase letter "A".."Z"> UPALPHA = <any US-ASCII uppercase letter "A".."Z">
LOALPHA = <any US-ASCII lowercase letter "a".."z"> LOALPHA = <any US-ASCII lowercase letter "a".."z">
ALPHA = UPALPHA | LOALPHA ALPHA = UPALPHA | LOALPHA
DIGIT = <any US-ASCII digit "0".."9"> DIGIT = <any US-ASCII digit "0".."9">
CTL = <any US-ASCII control character CTL = <any US-ASCII control character
(octets 0 - 31) and DEL (127)> (octets 0 - 31) and DEL (127)>
CR = <US-ASCII CR, carriage return (13)> CR = <US-ASCII CR, carriage return (13)>
LF = <US-ASCII LF, linefeed (10)> LF = <US-ASCII LF, linefeed (10)>
SP = <US-ASCII SP, space (32)> SP = <US-ASCII SP, space (32)>
HT = <US-ASCII HT, horizontal-tab (9)> HT = <US-ASCII HT, horizontal-tab (9)>
<"> = <US-ASCII double-quote mark (34)> <"> = <US-ASCII double-quote mark (34)>
HTTP/1.1 defines the sequence CR LF as the end-of-line marker for all HTTP/1.1 defines the sequence CR LF as the end-of-line marker for all
protocol elements except the entity-body (see appendix 19.3 for protocol elements except the entity-body (see Appendix A.3 for
tolerant applications). The end-of-line marker within an entity-body tolerant applications). The end-of-line marker within an entity-body
is defined by its associated media type, as described in section 3.7. is defined by its associated media type, as described in Section 3.7.
CRLF = CR LF CRLF = CR LF
HTTP/1.1 header field values can be folded onto multiple lines if the HTTP/1.1 header field values can be folded onto multiple lines if the
continuation line begins with a space or horizontal tab. All linear continuation line begins with a space or horizontal tab. All linear
white space, including folding, has the same semantics as SP. A white space, including folding, has the same semantics as SP. A
recipient MAY replace any linear white space with a single SP before recipient MAY replace any linear white space with a single SP before
interpreting the field value or forwarding the message downstream. interpreting the field value or forwarding the message downstream.
LWS = [CRLF] 1*( SP | HT ) LWS = [CRLF] 1*( SP | HT )
The TEXT rule is only used for descriptive field contents and values The TEXT rule is only used for descriptive field contents and values
that are not intended to be interpreted by the message parser. Words that are not intended to be interpreted by the message parser. Words
of *TEXT MAY contain characters from character sets other than ISO- of *TEXT MAY contain characters from character sets other than ISO-
8859-1 [22] only when encoded according to the rules of RFC 2047 8859-1 [ISO-8859] only when encoded according to the rules of RFC
[14]. 2047 [RFC2047].
TEXT = <any OCTET except CTLs, TEXT = <any OCTET except CTLs,
but including LWS> but including LWS>
A CRLF is allowed in the definition of TEXT only as part of a header A CRLF is allowed in the definition of TEXT only as part of a header
field continuation. It is expected that the folding LWS will be field continuation. It is expected that the folding LWS will be
replaced with a single SP before interpretation of the TEXT value. replaced with a single SP before interpretation of the TEXT value.
Hexadecimal numeric characters are used in several protocol elements. Hexadecimal numeric characters are used in several protocol elements.
skipping to change at page 17, line 4 skipping to change at page 19, line 24
but including LWS> but including LWS>
A CRLF is allowed in the definition of TEXT only as part of a header A CRLF is allowed in the definition of TEXT only as part of a header
field continuation. It is expected that the folding LWS will be field continuation. It is expected that the folding LWS will be
replaced with a single SP before interpretation of the TEXT value. replaced with a single SP before interpretation of the TEXT value.
Hexadecimal numeric characters are used in several protocol elements. Hexadecimal numeric characters are used in several protocol elements.
HEX = "A" | "B" | "C" | "D" | "E" | "F" HEX = "A" | "B" | "C" | "D" | "E" | "F"
| "a" | "b" | "c" | "d" | "e" | "f" | DIGIT | "a" | "b" | "c" | "d" | "e" | "f" | DIGIT
Many HTTP/1.1 header field values consist of words separated by LWS Many HTTP/1.1 header field values consist of words separated by LWS
or special characters. These special characters MUST be in a quoted or special characters. These special characters MUST be in a quoted
string to be used within a parameter value (as defined in section string to be used within a parameter value (as defined in
3.6). Section 3.6).
token = 1*<any CHAR except CTLs or separators> token = 1*<any CHAR except CTLs or separators>
separators = "(" | ")" | "<" | ">" | "@" separators = "(" | ")" | "<" | ">" | "@"
| "," | ";" | ":" | "\" | <"> | "," | ";" | ":" | "\" | <">
| "/" | "[" | "]" | "?" | "=" | "/" | "[" | "]" | "?" | "="
| "{" | "}" | SP | HT | "{" | "}" | SP | HT
Comments can be included in some HTTP header fields by surrounding Comments can be included in some HTTP header fields by surrounding
the comment text with parentheses. Comments are only allowed in the comment text with parentheses. Comments are only allowed in
fields containing "comment" as part of their field value definition. fields containing "comment" as part of their field value definition.
skipping to change at page 17, line 35 skipping to change at page 20, line 7
double-quote marks. double-quote marks.
quoted-string = ( <"> *(qdtext | quoted-pair ) <"> ) quoted-string = ( <"> *(qdtext | quoted-pair ) <"> )
qdtext = <any TEXT except <">> qdtext = <any TEXT except <">>
The backslash character ("\") MAY be used as a single-character The backslash character ("\") MAY be used as a single-character
quoting mechanism only within quoted-string and comment constructs. quoting mechanism only within quoted-string and comment constructs.
quoted-pair = "\" CHAR quoted-pair = "\" CHAR
3 Protocol Parameters 3. Protocol Parameters
3.1 HTTP Version 3.1. HTTP Version
HTTP uses a "<major>.<minor>" numbering scheme to indicate versions HTTP uses a "<major>.<minor>" numbering scheme to indicate versions
of the protocol. The protocol versioning policy is intended to allow of the protocol. The protocol versioning policy is intended to allow
the sender to indicate the format of a message and its capacity for the sender to indicate the format of a message and its capacity for
understanding further HTTP communication, rather than the features understanding further HTTP communication, rather than the features
obtained via that communication. No change is made to the version obtained via that communication. No change is made to the version
number for the addition of message components which do not affect number for the addition of message components which do not affect
communication behavior or which only add to extensible field values. communication behavior or which only add to extensible field values.
The <minor> number is incremented when the changes made to the The <minor> number is incremented when the changes made to the
protocol add features which do not change the general message parsing protocol add features which do not change the general message parsing
algorithm, but which may add to the message semantics and imply algorithm, but which may add to the message semantics and imply
additional capabilities of the sender. The <major> number is additional capabilities of the sender. The <major> number is
incremented when the format of a message within the protocol is incremented when the format of a message within the protocol is
changed. See RFC 2145 [36] for a fuller explanation. changed. See RFC 2145 [RFC2145] for a fuller explanation.
The version of an HTTP message is indicated by an HTTP-Version field The version of an HTTP message is indicated by an HTTP-Version field
in the first line of the message. in the first line of the message.
HTTP-Version = "HTTP" "/" 1*DIGIT "." 1*DIGIT HTTP-Version = "HTTP" "/" 1*DIGIT "." 1*DIGIT
Note that the major and minor numbers MUST be treated as separate Note that the major and minor numbers MUST be treated as separate
integers and that each MAY be incremented higher than a single digit. integers and that each MAY be incremented higher than a single digit.
Thus, HTTP/2.4 is a lower version than HTTP/2.13, which in turn is Thus, HTTP/2.4 is a lower version than HTTP/2.13, which in turn is
lower than HTTP/12.3. Leading zeros MUST be ignored by recipients and lower than HTTP/12.3. Leading zeros MUST be ignored by recipients
MUST NOT be sent. and MUST NOT be sent.
An application that sends a request or response message that includes An application that sends a request or response message that includes
HTTP-Version of "HTTP/1.1" MUST be at least conditionally compliant HTTP-Version of "HTTP/1.1" MUST be at least conditionally compliant
with this specification. Applications that are at least conditionally with this specification. Applications that are at least
compliant with this specification SHOULD use an HTTP-Version of conditionally compliant with this specification SHOULD use an HTTP-
"HTTP/1.1" in their messages, and MUST do so for any message that is Version of "HTTP/1.1" in their messages, and MUST do so for any
not compatible with HTTP/1.0. For more details on when to send message that is not compatible with HTTP/1.0. For more details on
specific HTTP-Version values, see RFC 2145 [36]. when to send specific HTTP-Version values, see RFC 2145 [RFC2145].
The HTTP version of an application is the highest HTTP version for The HTTP version of an application is the highest HTTP version for
which the application is at least conditionally compliant. which the application is at least conditionally compliant.
Proxy and gateway applications need to be careful when forwarding Proxy and gateway applications need to be careful when forwarding
messages in protocol versions different from that of the application. messages in protocol versions different from that of the application.
Since the protocol version indicates the protocol capability of the Since the protocol version indicates the protocol capability of the
sender, a proxy/gateway MUST NOT send a message with a version sender, a proxy/gateway MUST NOT send a message with a version
indicator which is greater than its actual version. If a higher indicator which is greater than its actual version. If a higher
version request is received, the proxy/gateway MUST either downgrade version request is received, the proxy/gateway MUST either downgrade
the request version, or respond with an error, or switch to tunnel the request version, or respond with an error, or switch to tunnel
behavior. behavior.
Due to interoperability problems with HTTP/1.0 proxies discovered Due to interoperability problems with HTTP/1.0 proxies discovered
since the publication of RFC 2068[33], caching proxies MUST, gateways since the publication of RFC 2068 [RFC2068], caching proxies MUST,
MAY, and tunnels MUST NOT upgrade the request to the highest version gateways MAY, and tunnels MUST NOT upgrade the request to the highest
they support. The proxy/gateway's response to that request MUST be in version they support. The proxy/gateway's response to that request
the same major version as the request. MUST be in the same major version as the request.
Note: Converting between versions of HTTP may involve modification Note: Converting between versions of HTTP may involve modification
of header fields required or forbidden by the versions involved. of header fields required or forbidden by the versions involved.
3.2 Uniform Resource Identifiers 3.2. Uniform Resource Identifiers
URIs have been known by many names: WWW addresses, Universal Document URIs have been known by many names: WWW addresses, Universal Document
Identifiers, Universal Resource Identifiers [3], and finally the Identifiers, Universal Resource Identifiers [RFC1630], and finally
combination of Uniform Resource Locators (URL) [4] and Names (URN) the combination of Uniform Resource Locators (URL) [RFC1738] and
[20]. As far as HTTP is concerned, Uniform Resource Identifiers are Names (URN) [RFC1737]. As far as HTTP is concerned, Uniform Resource
simply formatted strings which identify--via name, location, or any Identifiers are simply formatted strings which identify--via name,
other characteristic--a resource. location, or any other characteristic--a resource.
3.2.1 General Syntax 3.2.1. General Syntax
URIs in HTTP can be represented in absolute form or relative to some URIs in HTTP can be represented in absolute form or relative to some
known base URI [11], depending upon the context of their use. The two known base URI [RFC1808], depending upon the context of their use.
forms are differentiated by the fact that absolute URIs always begin The two forms are differentiated by the fact that absolute URIs
with a scheme name followed by a colon. For definitive information on always begin with a scheme name followed by a colon. For definitive
URL syntax and semantics, see "Uniform Resource Identifiers (URI): information on URL syntax and semantics, see "Uniform Resource
Generic Syntax and Semantics," RFC 2396 [42] (which replaces RFCs Identifiers (URI): Generic Syntax and Semantics," RFC 2396 [RFC2396]
1738 [4] and RFC 1808 [11]). This specification adopts the (which replaces RFCs 1738 [RFC1738] and RFC 1808 [RFC1808]). This
definitions of "URI-reference", "absoluteURI", "relativeURI", "port", specification adopts the definitions of "URI-reference",
"host","abs_path", "rel_path", and "authority" from that "absoluteURI", "relativeURI", "port", "host","abs_path", "rel_path",
specification. and "authority" from that specification.
The HTTP protocol does not place any a priori limit on the length of The HTTP protocol does not place any a priori limit on the length of
a URI. Servers MUST be able to handle the URI of any resource they a URI. Servers MUST be able to handle the URI of any resource they
serve, and SHOULD be able to handle URIs of unbounded length if they serve, and SHOULD be able to handle URIs of unbounded length if they
provide GET-based forms that could generate such URIs. A server provide GET-based forms that could generate such URIs. A server
SHOULD return 414 (Request-URI Too Long) status if a URI is longer SHOULD return 414 (Request-URI Too Long) status if a URI is longer
than the server can handle (see section 10.4.15). than the server can handle (see Section 10.4.15).
Note: Servers ought to be cautious about depending on URI lengths Note: Servers ought to be cautious about depending on URI lengths
above 255 bytes, because some older client or proxy above 255 bytes, because some older client or proxy
implementations might not properly support these lengths. implementations might not properly support these lengths.
3.2.2 http URL 3.2.2. http URL
The "http" scheme is used to locate network resources via the HTTP The "http" scheme is used to locate network resources via the HTTP
protocol. This section defines the scheme-specific syntax and protocol. This section defines the scheme-specific syntax and
semantics for http URLs. semantics for http URLs.
http_URL = "http:" "//" host [ ":" port ] [ abs_path [ "?" query ]] http_URL = "http:" "//" host [ ":" port ] [ abs_path [ "?" query ]]
If the port is empty or not given, port 80 is assumed. The semantics If the port is empty or not given, port 80 is assumed. The semantics
are that the identified resource is located at the server listening are that the identified resource is located at the server listening
for TCP connections on that port of that host, and the Request-URI for TCP connections on that port of that host, and the Request-URI
for the resource is abs_path (section 5.1.2). The use of IP addresses for the resource is abs_path (Section 5.1.2). The use of IP
in URLs SHOULD be avoided whenever possible (see RFC 1900 [24]). If addresses in URLs SHOULD be avoided whenever possible (see RFC 1900
the abs_path is not present in the URL, it MUST be given as "/" when [RFC1900]). If the abs_path is not present in the URL, it MUST be
used as a Request-URI for a resource (section 5.1.2). If a proxy given as "/" when used as a Request-URI for a resource
receives a host name which is not a fully qualified domain name, it (Section 5.1.2). If a proxy receives a host name which is not a
MAY add its domain to the host name it received. If a proxy receives fully qualified domain name, it MAY add its domain to the host name
a fully qualified domain name, the proxy MUST NOT change the host it received. If a proxy receives a fully qualified domain name, the
name. proxy MUST NOT change the host name.
3.2.3 URI Comparison 3.2.3. URI Comparison
When comparing two URIs to decide if they match or not, a client When comparing two URIs to decide if they match or not, a client
SHOULD use a case-sensitive octet-by-octet comparison of the entire SHOULD use a case-sensitive octet-by-octet comparison of the entire
URIs, with these exceptions: URIs, with these exceptions:
- A port that is empty or not given is equivalent to the default o A port that is empty or not given is equivalent to the default
port for that URI-reference; port for that URI-reference;
- Comparisons of host names MUST be case-insensitive; o Comparisons of host names MUST be case-insensitive;
- Comparisons of scheme names MUST be case-insensitive; o Comparisons of scheme names MUST be case-insensitive;
- An empty abs_path is equivalent to an abs_path of "/". o An empty abs_path is equivalent to an abs_path of "/".
Characters other than those in the "reserved" and "unsafe" sets (see Characters other than those in the "reserved" and "unsafe" sets (see
RFC 2396 [42]) are equivalent to their ""%" HEX HEX" encoding. RFC 2396 [RFC2396]) are equivalent to their ""%" HEX HEX" encoding.
For example, the following three URIs are equivalent: For example, the following three URIs are equivalent:
http://abc.com:80/~smith/home.html http://abc.com:80/~smith/home.html
http://ABC.com/%7Esmith/home.html http://ABC.com/%7Esmith/home.html
http://ABC.com:/%7esmith/home.html http://ABC.com:/%7esmith/home.html
3.3 Date/Time Formats 3.3. Date/Time Formats
3.3.1 Full Date 3.3.1. Full Date
HTTP applications have historically allowed three different formats HTTP applications have historically allowed three different formats
for the representation of date/time stamps: for the representation of date/time stamps:
Sun, 06 Nov 1994 08:49:37 GMT ; RFC 822, updated by RFC 1123 Sun, 06 Nov 1994 08:49:37 GMT ; RFC 822, updated by RFC 1123
Sunday, 06-Nov-94 08:49:37 GMT ; RFC 850, obsoleted by RFC 1036 Sunday, 06-Nov-94 08:49:37 GMT ; RFC 850, obsoleted by RFC 1036
Sun Nov 6 08:49:37 1994 ; ANSI C's asctime() format Sun Nov 6 08:49:37 1994 ; ANSI C's asctime() format
The first format is preferred as an Internet standard and represents The first format is preferred as an Internet standard and represents
a fixed-length subset of that defined by RFC 1123 [8] (an update to a fixed-length subset of that defined by RFC 1123 [RFC1123] (an
RFC 822 [9]). The second format is in common use, but is based on the update to RFC 822 [RFC822]). The second format is in common use, but
obsolete RFC 850 [12] date format and lacks a four-digit year. is based on the obsolete RFC 850 [RFC1036] date format and lacks a
HTTP/1.1 clients and servers that parse the date value MUST accept four-digit year. HTTP/1.1 clients and servers that parse the date
all three formats (for compatibility with HTTP/1.0), though they MUST value MUST accept all three formats (for compatibility with
only generate the RFC 1123 format for representing HTTP-date values HTTP/1.0), though they MUST only generate the RFC 1123 format for
in header fields. See section 19.3 for further information. representing HTTP-date values in header fields. See Appendix A.3 for
further information.
Note: Recipients of date values are encouraged to be robust in Note: Recipients of date values are encouraged to be robust in
accepting date values that may have been sent by non-HTTP accepting date values that may have been sent by non-HTTP
applications, as is sometimes the case when retrieving or posting applications, as is sometimes the case when retrieving or posting
messages via proxies/gateways to SMTP or NNTP. messages via proxies/gateways to SMTP or NNTP.
All HTTP date/time stamps MUST be represented in Greenwich Mean Time All HTTP date/time stamps MUST be represented in Greenwich Mean Time
(GMT), without exception. For the purposes of HTTP, GMT is exactly (GMT), without exception. For the purposes of HTTP, GMT is exactly
equal to UTC (Coordinated Universal Time). This is indicated in the equal to UTC (Coordinated Universal Time). This is indicated in the
first two formats by the inclusion of "GMT" as the three-letter first two formats by the inclusion of "GMT" as the three-letter
skipping to change at page 21, line 34 skipping to change at page 24, line 25
time = 2DIGIT ":" 2DIGIT ":" 2DIGIT time = 2DIGIT ":" 2DIGIT ":" 2DIGIT
; 00:00:00 - 23:59:59 ; 00:00:00 - 23:59:59
wkday = "Mon" | "Tue" | "Wed" wkday = "Mon" | "Tue" | "Wed"
| "Thu" | "Fri" | "Sat" | "Sun" | "Thu" | "Fri" | "Sat" | "Sun"
weekday = "Monday" | "Tuesday" | "Wednesday" weekday = "Monday" | "Tuesday" | "Wednesday"
| "Thursday" | "Friday" | "Saturday" | "Sunday" | "Thursday" | "Friday" | "Saturday" | "Sunday"
month = "Jan" | "Feb" | "Mar" | "Apr" month = "Jan" | "Feb" | "Mar" | "Apr"
| "May" | "Jun" | "Jul" | "Aug" | "May" | "Jun" | "Jul" | "Aug"
| "Sep" | "Oct" | "Nov" | "Dec" | "Sep" | "Oct" | "Nov" | "Dec"
Note: HTTP requirements for the date/time stamp format apply only Note: HTTP requirements for the date/time stamp format apply only to
to their usage within the protocol stream. Clients and servers are their usage within the protocol stream. Clients and servers are not
not required to use these formats for user presentation, request required to use these formats for user presentation, request logging,
logging, etc. etc.
3.3.2 Delta Seconds 3.3.2. Delta Seconds
Some HTTP header fields allow a time value to be specified as an Some HTTP header fields allow a time value to be specified as an
integer number of seconds, represented in decimal, after the time integer number of seconds, represented in decimal, after the time
that the message was received. that the message was received.
delta-seconds = 1*DIGIT delta-seconds = 1*DIGIT
3.4 Character Sets 3.4. Character Sets
HTTP uses the same definition of the term "character set" as that HTTP uses the same definition of the term "character set" as that
described for MIME: described for MIME:
The term "character set" is used in this document to refer to a The term "character set" is used in this document to refer to a
method used with one or more tables to convert a sequence of octets method used with one or more tables to convert a sequence of octets
into a sequence of characters. Note that unconditional conversion in into a sequence of characters. Note that unconditional conversion in
the other direction is not required, in that not all characters may the other direction is not required, in that not all characters may
be available in a given character set and a character set may provide be available in a given character set and a character set may provide
more than one sequence of octets to represent a particular character. more than one sequence of octets to represent a particular character.
skipping to change at page 22, line 26 skipping to change at page 25, line 15
to characters. In particular, use of external profiling information to characters. In particular, use of external profiling information
to determine the exact mapping is not permitted. to determine the exact mapping is not permitted.
Note: This use of the term "character set" is more commonly Note: This use of the term "character set" is more commonly
referred to as a "character encoding." However, since HTTP and referred to as a "character encoding." However, since HTTP and
MIME share the same registry, it is important that the terminology MIME share the same registry, it is important that the terminology
also be shared. also be shared.
HTTP character sets are identified by case-insensitive tokens. The HTTP character sets are identified by case-insensitive tokens. The
complete set of tokens is defined by the IANA Character Set registry complete set of tokens is defined by the IANA Character Set registry
[19]. [RFC1700].
charset = token charset = token
Although HTTP allows an arbitrary token to be used as a charset Although HTTP allows an arbitrary token to be used as a charset
value, any token that has a predefined value within the IANA value, any token that has a predefined value within the IANA
Character Set registry [19] MUST represent the character set defined Character Set registry [RFC1700] MUST represent the character set
by that registry. Applications SHOULD limit their use of character defined by that registry. Applications SHOULD limit their use of
sets to those defined by the IANA registry. character sets to those defined by the IANA registry.
Implementors should be aware of IETF character set requirements [38] Implementors should be aware of IETF character set requirements
[41]. [RFC2279] [RFC2277].
3.4.1 Missing Charset 3.4.1. Missing Charset
Some HTTP/1.0 software has interpreted a Content-Type header without Some HTTP/1.0 software has interpreted a Content-Type header without
charset parameter incorrectly to mean "recipient should guess." charset parameter incorrectly to mean "recipient should guess."
Senders wishing to defeat this behavior MAY include a charset Senders wishing to defeat this behavior MAY include a charset
parameter even when the charset is ISO-8859-1 and SHOULD do so when parameter even when the charset is ISO-8859-1 and SHOULD do so when
it is known that it will not confuse the recipient. it is known that it will not confuse the recipient.
Unfortunately, some older HTTP/1.0 clients did not deal properly with Unfortunately, some older HTTP/1.0 clients did not deal properly with
an explicit charset parameter. HTTP/1.1 recipients MUST respect the an explicit charset parameter. HTTP/1.1 recipients MUST respect the
charset label provided by the sender; and those user agents that have charset label provided by the sender; and those user agents that have
a provision to "guess" a charset MUST use the charset from the a provision to "guess" a charset MUST use the charset from the
content-type field if they support that charset, rather than the content-type field if they support that charset, rather than the
recipient's preference, when initially displaying a document. See recipient's preference, when initially displaying a document. See
section 3.7.1. Section 3.7.1.
3.5 Content Codings 3.5. Content Codings
Content coding values indicate an encoding transformation that has Content coding values indicate an encoding transformation that has
been or can be applied to an entity. Content codings are primarily been or can be applied to an entity. Content codings are primarily
used to allow a document to be compressed or otherwise usefully used to allow a document to be compressed or otherwise usefully
transformed without losing the identity of its underlying media type transformed without losing the identity of its underlying media type
and without loss of information. Frequently, the entity is stored in and without loss of information. Frequently, the entity is stored in
coded form, transmitted directly, and only decoded by the recipient. coded form, transmitted directly, and only decoded by the recipient.
content-coding = token content-coding = token
All content-coding values are case-insensitive. HTTP/1.1 uses All content-coding values are case-insensitive. HTTP/1.1 uses
content-coding values in the Accept-Encoding (section 14.3) and content-coding values in the Accept-Encoding (Section 14.3) and
Content-Encoding (section 14.11) header fields. Although the value Content-Encoding (Section 14.11) header fields. Although the value
describes the content-coding, what is more important is that it describes the content-coding, what is more important is that it
indicates what decoding mechanism will be required to remove the indicates what decoding mechanism will be required to remove the
encoding. encoding.
The Internet Assigned Numbers Authority (IANA) acts as a registry for The Internet Assigned Numbers Authority (IANA) acts as a registry for
content-coding value tokens. Initially, the registry contains the content-coding value tokens. Initially, the registry contains the
following tokens: following tokens:
gzip An encoding format produced by the file compression program gzip
"gzip" (GNU zip) as described in RFC 1952 [25]. This format is a
An encoding format produced by the file compression program "gzip"
(GNU zip) as described in RFC 1952 [RFC1952]. This format is a
Lempel-Ziv coding (LZ77) with a 32 bit CRC. Lempel-Ziv coding (LZ77) with a 32 bit CRC.
compress compress
The encoding format produced by the common UNIX file compression The encoding format produced by the common UNIX file compression
program "compress". This format is an adaptive Lempel-Ziv-Welch program "compress". This format is an adaptive Lempel-Ziv-Welch
coding (LZW). coding (LZW).
Use of program names for the identification of encoding formats Use of program names for the identification of encoding formats is
is not desirable and is discouraged for future encodings. Their not desirable and is discouraged for future encodings. Their use
use here is representative of historical practice, not good here is representative of historical practice, not good design.
design. For compatibility with previous implementations of HTTP, For compatibility with previous implementations of HTTP,
applications SHOULD consider "x-gzip" and "x-compress" to be applications SHOULD consider "x-gzip" and "x-compress" to be
equivalent to "gzip" and "compress" respectively. equivalent to "gzip" and "compress" respectively.
deflate deflate
The "zlib" format defined in RFC 1950 [31] in combination with
the "deflate" compression mechanism described in RFC 1951 [29]. The "zlib" format defined in RFC 1950 [RFC1950] in combination
with the "deflate" compression mechanism described in RFC 1951
[RFC1951].
identity identity
The default (identity) encoding; the use of no transformation The default (identity) encoding; the use of no transformation
whatsoever. This content-coding is used only in the Accept- whatsoever. This content-coding is used only in the Accept-
Encoding header, and SHOULD NOT be used in the Content-Encoding Encoding header, and SHOULD NOT be used in the Content-Encoding
header. header.
New content-coding value tokens SHOULD be registered; to allow New content-coding value tokens SHOULD be registered; to allow
interoperability between clients and servers, specifications of the interoperability between clients and servers, specifications of the
content coding algorithms needed to implement a new value SHOULD be content coding algorithms needed to implement a new value SHOULD be
publicly available and adequate for independent implementation, and publicly available and adequate for independent implementation, and
conform to the purpose of content coding defined in this section. conform to the purpose of content coding defined in this section.
skipping to change at page 24, line 17 skipping to change at page 27, line 7
whatsoever. This content-coding is used only in the Accept- whatsoever. This content-coding is used only in the Accept-
Encoding header, and SHOULD NOT be used in the Content-Encoding Encoding header, and SHOULD NOT be used in the Content-Encoding
header. header.
New content-coding value tokens SHOULD be registered; to allow New content-coding value tokens SHOULD be registered; to allow
interoperability between clients and servers, specifications of the interoperability between clients and servers, specifications of the
content coding algorithms needed to implement a new value SHOULD be content coding algorithms needed to implement a new value SHOULD be
publicly available and adequate for independent implementation, and publicly available and adequate for independent implementation, and
conform to the purpose of content coding defined in this section. conform to the purpose of content coding defined in this section.
3.6 Transfer Codings 3.6. Transfer Codings
Transfer-coding values are used to indicate an encoding Transfer-coding values are used to indicate an encoding
transformation that has been, can be, or may need to be applied to an transformation that has been, can be, or may need to be applied to an
entity-body in order to ensure "safe transport" through the network. entity-body in order to ensure "safe transport" through the network.
This differs from a content coding in that the transfer-coding is a This differs from a content coding in that the transfer-coding is a
property of the message, not of the original entity. property of the message, not of the original entity.
transfer-coding = "chunked" | transfer-extension transfer-coding = "chunked" | transfer-extension
transfer-extension = token *( ";" parameter ) transfer-extension = token *( ";" parameter )
Parameters are in the form of attribute/value pairs. Parameters are in the form of attribute/value pairs.
parameter = attribute "=" value parameter = attribute "=" value
attribute = token attribute = token
value = token | quoted-string value = token | quoted-string
All transfer-coding values are case-insensitive. HTTP/1.1 uses All transfer-coding values are case-insensitive. HTTP/1.1 uses
transfer-coding values in the TE header field (section 14.39) and in transfer-coding values in the TE header field (Section 14.39) and in
the Transfer-Encoding header field (section 14.41). the Transfer-Encoding header field (Section 14.41).
Whenever a transfer-coding is applied to a message-body, the set of Whenever a transfer-coding is applied to a message-body, the set of
transfer-codings MUST include "chunked", unless the message is transfer-codings MUST include "chunked", unless the message is
terminated by closing the connection. When the "chunked" transfer- terminated by closing the connection. When the "chunked" transfer-
coding is used, it MUST be the last transfer-coding applied to the coding is used, it MUST be the last transfer-coding applied to the
message-body. The "chunked" transfer-coding MUST NOT be applied more message-body. The "chunked" transfer-coding MUST NOT be applied more
than once to a message-body. These rules allow the recipient to than once to a message-body. These rules allow the recipient to
determine the transfer-length of the message (section 4.4). determine the transfer-length of the message (Section 4.4).
Transfer-codings are analogous to the Content-Transfer-Encoding Transfer-codings are analogous to the Content-Transfer-Encoding
values of MIME [7], which were designed to enable safe transport of values of MIME [RFC2045], which were designed to enable safe
binary data over a 7-bit transport service. However, safe transport transport of binary data over a 7-bit transport service. However,
has a different focus for an 8bit-clean transfer protocol. In HTTP, safe transport has a different focus for an 8bit-clean transfer
the only unsafe characteristic of message-bodies is the difficulty in protocol. In HTTP, the only unsafe characteristic of message-bodies
determining the exact body length (section 7.2.2), or the desire to is the difficulty in determining the exact body length
encrypt data over a shared transport. (Section 7.2.2), or the desire to encrypt data over a shared
transport.
The Internet Assigned Numbers Authority (IANA) acts as a registry for The Internet Assigned Numbers Authority (IANA) acts as a registry for
transfer-coding value tokens. Initially, the registry contains the transfer-coding value tokens. Initially, the registry contains the
following tokens: "chunked" (section 3.6.1), "identity" (section following tokens: "chunked" (Section 3.6.1), "identity" (section
3.6.2), "gzip" (section 3.5), "compress" (section 3.5), and "deflate" 3.6.2), "gzip" (Section 3.5), "compress" (Section 3.5), and "deflate"
(section 3.5). (Section 3.5).
New transfer-coding value tokens SHOULD be registered in the same way New transfer-coding value tokens SHOULD be registered in the same way
as new content-coding value tokens (section 3.5). as new content-coding value tokens (Section 3.5).
A server which receives an entity-body with a transfer-coding it does A server which receives an entity-body with a transfer-coding it does
not understand SHOULD return 501 (Unimplemented), and close the not understand SHOULD return 501 (Unimplemented), and close the
connection. A server MUST NOT send transfer-codings to an HTTP/1.0 connection. A server MUST NOT send transfer-codings to an HTTP/1.0
client. client.
3.6.1 Chunked Transfer Coding 3.6.1. Chunked Transfer Coding
The chunked encoding modifies the body of a message in order to The chunked encoding modifies the body of a message in order to
transfer it as a series of chunks, each with its own size indicator, transfer it as a series of chunks, each with its own size indicator,
followed by an OPTIONAL trailer containing entity-header fields. This followed by an OPTIONAL trailer containing entity-header fields.
allows dynamically produced content to be transferred along with the This allows dynamically produced content to be transferred along with
information necessary for the recipient to verify that it has the information necessary for the recipient to verify that it has
received the full message. received the full message.
Chunked-Body = *chunk Chunked-Body = *chunk
last-chunk last-chunk
trailer trailer
CRLF CRLF
chunk = chunk-size [ chunk-extension ] CRLF chunk = chunk-size [ chunk-extension ] CRLF
chunk-data CRLF chunk-data CRLF
chunk-size = 1*HEX chunk-size = 1*HEX
skipping to change at page 25, line 51 skipping to change at page 28, line 43
chunk-data = chunk-size(OCTET) chunk-data = chunk-size(OCTET)
trailer = *(entity-header CRLF) trailer = *(entity-header CRLF)
The chunk-size field is a string of hex digits indicating the size of The chunk-size field is a string of hex digits indicating the size of
the chunk. The chunked encoding is ended by any chunk whose size is the chunk. The chunked encoding is ended by any chunk whose size is
zero, followed by the trailer, which is terminated by an empty line. zero, followed by the trailer, which is terminated by an empty line.
The trailer allows the sender to include additional HTTP header The trailer allows the sender to include additional HTTP header
fields at the end of the message. The Trailer header field can be fields at the end of the message. The Trailer header field can be
used to indicate which header fields are included in a trailer (see used to indicate which header fields are included in a trailer (see
section 14.40). Section 14.40).
A server using chunked transfer-coding in a response MUST NOT use the A server using chunked transfer-coding in a response MUST NOT use the
trailer for any header fields unless at least one of the following is trailer for any header fields unless at least one of the following is
true: true:
a)the request included a TE header field that indicates "trailers" is 1. the request included a TE header field that indicates "trailers"
acceptable in the transfer-coding of the response, as described in is acceptable in the transfer-coding of the response, as
section 14.39; or, described in Section 14.39; or,
2. the server is the origin server for the response, the trailer
b)the server is the origin server for the response, the trailer
fields consist entirely of optional metadata, and the recipient fields consist entirely of optional metadata, and the recipient
could use the message (in a manner acceptable to the origin server) could use the message (in a manner acceptable to the origin
without receiving this metadata. In other words, the origin server server) without receiving this metadata. In other words, the
is willing to accept the possibility that the trailer fields might origin server is willing to accept the possibility that the
be silently discarded along the path to the client. trailer fields might be silently discarded along the path to the
client.
This requirement prevents an interoperability failure when the This requirement prevents an interoperability failure when the
message is being received by an HTTP/1.1 (or later) proxy and message is being received by an HTTP/1.1 (or later) proxy and
forwarded to an HTTP/1.0 recipient. It avoids a situation where forwarded to an HTTP/1.0 recipient. It avoids a situation where
compliance with the protocol would have necessitated a possibly compliance with the protocol would have necessitated a possibly
infinite buffer on the proxy. infinite buffer on the proxy.
An example process for decoding a Chunked-Body is presented in An example process for decoding a Chunked-Body is presented in
appendix 19.4.6. Appendix A.4.6.
All HTTP/1.1 applications MUST be able to receive and decode the All HTTP/1.1 applications MUST be able to receive and decode the
"chunked" transfer-coding, and MUST ignore chunk-extension extensions "chunked" transfer-coding, and MUST ignore chunk-extension extensions
they do not understand. they do not understand.
3.7 Media Types 3.7. Media Types
HTTP uses Internet Media Types [17] in the Content-Type (section HTTP uses Internet Media Types [RFC1590] in the Content-Type
14.17) and Accept (section 14.1) header fields in order to provide (Section 14.17) and Accept (Section 14.1) header fields in order to
open and extensible data typing and type negotiation. provide open and extensible data typing and type negotiation.
media-type = type "/" subtype *( ";" parameter ) media-type = type "/" subtype *( ";" parameter )
type = token type = token
subtype = token subtype = token
Parameters MAY follow the type/subtype in the form of attribute/value Parameters MAY follow the type/subtype in the form of attribute/value
pairs (as defined in section 3.6). pairs (as defined in Section 3.6).
The type, subtype, and parameter attribute names are case- The type, subtype, and parameter attribute names are case-
insensitive. Parameter values might or might not be case-sensitive, insensitive. Parameter values might or might not be case-sensitive,
depending on the semantics of the parameter name. Linear white space depending on the semantics of the parameter name. Linear white space
(LWS) MUST NOT be used between the type and subtype, nor between an (LWS) MUST NOT be used between the type and subtype, nor between an
attribute and its value. The presence or absence of a parameter might attribute and its value. The presence or absence of a parameter
be significant to the processing of a media-type, depending on its might be significant to the processing of a media-type, depending on
definition within the media type registry. its definition within the media type registry.
Note that some older HTTP applications do not recognize media type Note that some older HTTP applications do not recognize media type
parameters. When sending data to older HTTP applications, parameters. When sending data to older HTTP applications,
implementations SHOULD only use media type parameters when they are implementations SHOULD only use media type parameters when they are
required by that type/subtype definition. required by that type/subtype definition.
Media-type values are registered with the Internet Assigned Number Media-type values are registered with the Internet Assigned Number
Authority (IANA [19]). The media type registration process is Authority (IANA [RFC1700]). The media type registration process is
outlined in RFC 1590 [17]. Use of non-registered media types is outlined in RFC 1590 [RFC1590]. Use of non-registered media types is
discouraged. discouraged.
3.7.1 Canonicalization and Text Defaults 3.7.1. Canonicalization and Text Defaults
Internet media types are registered with a canonical form. An Internet media types are registered with a canonical form. An
entity-body transferred via HTTP messages MUST be represented in the entity-body transferred via HTTP messages MUST be represented in the
appropriate canonical form prior to its transmission except for appropriate canonical form prior to its transmission except for
"text" types, as defined in the next paragraph. "text" types, as defined in the next paragraph.
When in canonical form, media subtypes of the "text" type use CRLF as When in canonical form, media subtypes of the "text" type use CRLF as
the text line break. HTTP relaxes this requirement and allows the the text line break. HTTP relaxes this requirement and allows the
transport of text media with plain CR or LF alone representing a line transport of text media with plain CR or LF alone representing a line
break when it is done consistently for an entire entity-body. HTTP break when it is done consistently for an entire entity-body. HTTP
skipping to change at page 27, line 41 skipping to change at page 30, line 34
sequences are defined by that character set to represent the sequences are defined by that character set to represent the
equivalent of CR and LF for line breaks. This flexibility regarding equivalent of CR and LF for line breaks. This flexibility regarding
line breaks applies only to text media in the entity-body; a bare CR line breaks applies only to text media in the entity-body; a bare CR
or LF MUST NOT be substituted for CRLF within any of the HTTP control or LF MUST NOT be substituted for CRLF within any of the HTTP control
structures (such as header fields and multipart boundaries). structures (such as header fields and multipart boundaries).
If an entity-body is encoded with a content-coding, the underlying If an entity-body is encoded with a content-coding, the underlying
data MUST be in a form defined above prior to being encoded. data MUST be in a form defined above prior to being encoded.
The "charset" parameter is used with some media types to define the The "charset" parameter is used with some media types to define the
character set (section 3.4) of the data. When no explicit charset character set (Section 3.4) of the data. When no explicit charset
parameter is provided by the sender, media subtypes of the "text" parameter is provided by the sender, media subtypes of the "text"
type are defined to have a default charset value of "ISO-8859-1" when type are defined to have a default charset value of "ISO-8859-1" when
received via HTTP. Data in character sets other than "ISO-8859-1" or received via HTTP. Data in character sets other than "ISO-8859-1" or
its subsets MUST be labeled with an appropriate charset value. See its subsets MUST be labeled with an appropriate charset value. See
section 3.4.1 for compatibility problems. Section 3.4.1 for compatibility problems.
3.7.2 Multipart Types 3.7.2. Multipart Types
MIME provides for a number of "multipart" types -- encapsulations of MIME provides for a number of "multipart" types -- encapsulations of
one or more entities within a single message-body. All multipart one or more entities within a single message-body. All multipart
types share a common syntax, as defined in section 5.1.1 of RFC 2046 types share a common syntax, as defined in section 5.1.1 of RFC 2046
[40], and MUST include a boundary parameter as part of the media type [RFC2046], and MUST include a boundary parameter as part of the media
value. The message body is itself a protocol element and MUST type value. The message body is itself a protocol element and MUST
therefore use only CRLF to represent line breaks between body-parts. therefore use only CRLF to represent line breaks between body-parts.
Unlike in RFC 2046, the epilogue of any multipart message MUST be Unlike in RFC 2046, the epilogue of any multipart message MUST be
empty; HTTP applications MUST NOT transmit the epilogue (even if the empty; HTTP applications MUST NOT transmit the epilogue (even if the
original multipart contains an epilogue). These restrictions exist in original multipart contains an epilogue). These restrictions exist
order to preserve the self-delimiting nature of a multipart message- in order to preserve the self-delimiting nature of a multipart
body, wherein the "end" of the message-body is indicated by the message-body, wherein the "end" of the message-body is indicated by
ending multipart boundary. the ending multipart boundary.
In general, HTTP treats a multipart message-body no differently than In general, HTTP treats a multipart message-body no differently than
any other media type: strictly as payload. The one exception is the any other media type: strictly as payload. The one exception is the
"multipart/byteranges" type (appendix 19.2) when it appears in a 206 "multipart/byteranges" type (Appendix A.2) when it appears in a 206
(Partial Content) response, which will be interpreted by some HTTP (Partial Content) response, which will be interpreted by some HTTP
caching mechanisms as described in sections 13.5.4 and 14.16. In all caching mechanisms as described in sections 13.5.4 and 14.16. In all
other cases, an HTTP user agent SHOULD follow the same or similar other cases, an HTTP user agent SHOULD follow the same or similar
behavior as a MIME user agent would upon receipt of a multipart type. behavior as a MIME user agent would upon receipt of a multipart type.
The MIME header fields within each body-part of a multipart message- The MIME header fields within each body-part of a multipart message-
body do not have any significance to HTTP beyond that defined by body do not have any significance to HTTP beyond that defined by
their MIME semantics. their MIME semantics.
In general, an HTTP user agent SHOULD follow the same or similar In general, an HTTP user agent SHOULD follow the same or similar
behavior as a MIME user agent would upon receipt of a multipart type. behavior as a MIME user agent would upon receipt of a multipart type.
If an application receives an unrecognized multipart subtype, the If an application receives an unrecognized multipart subtype, the
application MUST treat it as being equivalent to "multipart/mixed". application MUST treat it as being equivalent to "multipart/mixed".
Note: The "multipart/form-data" type has been specifically defined Note: The "multipart/form-data" type has been specifically defined
for carrying form data suitable for processing via the POST for carrying form data suitable for processing via the POST
request method, as described in RFC 1867 [15]. request method, as described in RFC 1867 [RFC1867].
3.8 Product Tokens 3.8. Product Tokens
Product tokens are used to allow communicating applications to Product tokens are used to allow communicating applications to
identify themselves by software name and version. Most fields using identify themselves by software name and version. Most fields using
product tokens also allow sub-products which form a significant part product tokens also allow sub-products which form a significant part
of the application to be listed, separated by white space. By of the application to be listed, separated by white space. By
convention, the products are listed in order of their significance convention, the products are listed in order of their significance
for identifying the application. for identifying the application.
product = token ["/" product-version] product = token ["/" product-version]
product-version = token product-version = token
skipping to change at page 29, line 4 skipping to change at page 31, line 44
convention, the products are listed in order of their significance convention, the products are listed in order of their significance
for identifying the application. for identifying the application.
product = token ["/" product-version] product = token ["/" product-version]
product-version = token product-version = token
Examples: Examples:
User-Agent: CERN-LineMode/2.15 libwww/2.17b3 User-Agent: CERN-LineMode/2.15 libwww/2.17b3
Server: Apache/0.8.4 Server: Apache/0.8.4
Product tokens SHOULD be short and to the point. They MUST NOT be Product tokens SHOULD be short and to the point. They MUST NOT be
used for advertising or other non-essential information. Although any used for advertising or other non-essential information. Although
token character MAY appear in a product-version, this token SHOULD any token character MAY appear in a product-version, this token
only be used for a version identifier (i.e., successive versions of SHOULD only be used for a version identifier (i.e., successive
the same product SHOULD only differ in the product-version portion of versions of the same product SHOULD only differ in the product-
the product value). version portion of the product value).
3.9 Quality Values 3.9. Quality Values
HTTP content negotiation (section 12) uses short "floating point" HTTP content negotiation (Section 12) uses short "floating point"
numbers to indicate the relative importance ("weight") of various numbers to indicate the relative importance ("weight") of various
negotiable parameters. A weight is normalized to a real number in negotiable parameters. A weight is normalized to a real number in
the range 0 through 1, where 0 is the minimum and 1 the maximum the range 0 through 1, where 0 is the minimum and 1 the maximum
value. If a parameter has a quality value of 0, then content with value. If a parameter has a quality value of 0, then content with
this parameter is `not acceptable' for the client. HTTP/1.1 this parameter is `not acceptable' for the client. HTTP/1.1
applications MUST NOT generate more than three digits after the applications MUST NOT generate more than three digits after the
decimal point. User configuration of these values SHOULD also be decimal point. User configuration of these values SHOULD also be
limited in this fashion. limited in this fashion.
qvalue = ( "0" [ "." 0*3DIGIT ] ) qvalue = ( "0" [ "." 0*3DIGIT ] )
| ( "1" [ "." 0*3("0") ] ) | ( "1" [ "." 0*3("0") ] )
"Quality values" is a misnomer, since these values merely represent "Quality values" is a misnomer, since these values merely represent
relative degradation in desired quality. relative degradation in desired quality.
3.10 Language Tags 3.10. Language Tags
A language tag identifies a natural language spoken, written, or A language tag identifies a natural language spoken, written, or
otherwise conveyed by human beings for communication of information otherwise conveyed by human beings for communication of information
to other human beings. Computer languages are explicitly excluded. to other human beings. Computer languages are explicitly excluded.
HTTP uses language tags within the Accept-Language and Content- HTTP uses language tags within the Accept-Language and Content-
Language fields. Language fields.
The syntax and registry of HTTP language tags is the same as that The syntax and registry of HTTP language tags is the same as that
defined by RFC 1766 [1]. In summary, a language tag is composed of 1 defined by RFC 1766 [RFC1766]. In summary, a language tag is
or more parts: A primary language tag and a possibly empty series of composed of 1 or more parts: A primary language tag and a possibly
subtags: empty series of subtags:
language-tag = primary-tag *( "-" subtag ) language-tag = primary-tag *( "-" subtag )
primary-tag = 1*8ALPHA primary-tag = 1*8ALPHA
subtag = 1*8ALPHA subtag = 1*8ALPHA
White space is not allowed within the tag and all tags are case- White space is not allowed within the tag and all tags are case-
insensitive. The name space of language tags is administered by the insensitive. The name space of language tags is administered by the
IANA. Example tags include: IANA. Example tags include:
en, en-US, en-cockney, i-cherokee, x-pig-latin en, en-US, en-cockney, i-cherokee, x-pig-latin
skipping to change at page 30, line 4 skipping to change at page 32, line 45
language-tag = primary-tag *( "-" subtag ) language-tag = primary-tag *( "-" subtag )
primary-tag = 1*8ALPHA primary-tag = 1*8ALPHA
subtag = 1*8ALPHA subtag = 1*8ALPHA
White space is not allowed within the tag and all tags are case- White space is not allowed within the tag and all tags are case-
insensitive. The name space of language tags is administered by the insensitive. The name space of language tags is administered by the
IANA. Example tags include: IANA. Example tags include:
en, en-US, en-cockney, i-cherokee, x-pig-latin en, en-US, en-cockney, i-cherokee, x-pig-latin
where any two-letter primary-tag is an ISO-639 language abbreviation where any two-letter primary-tag is an ISO-639 language abbreviation
and any two-letter initial subtag is an ISO-3166 country code. (The and any two-letter initial subtag is an ISO-3166 country code. (The
last three tags above are not registered tags; all but the last are last three tags above are not registered tags; all but the last are
examples of tags which could be registered in future.) examples of tags which could be registered in future.)
3.11 Entity Tags 3.11. Entity Tags
Entity tags are used for comparing two or more entities from the same Entity tags are used for comparing two or more entities from the same
requested resource. HTTP/1.1 uses entity tags in the ETag (section requested resource. HTTP/1.1 uses entity tags in the ETag
14.19), If-Match (section 14.24), If-None-Match (section 14.26), and (Section 14.19), If-Match (Section 14.24), If-None-Match
If-Range (section 14.27) header fields. The definition of how they (Section 14.26), and If-Range (Section 14.27) header fields. The
are used and compared as cache validators is in section 13.3.3. An definition of how they are used and compared as cache validators is
entity tag consists of an opaque quoted string, possibly prefixed by in Section 13.3.3. An entity tag consists of an opaque quoted
a weakness indicator. string, possibly prefixed by a weakness indicator.
entity-tag = [ weak ] opaque-tag entity-tag = [ weak ] opaque-tag
weak = "W/" weak = "W/"
opaque-tag = quoted-string opaque-tag = quoted-string
A "strong entity tag" MAY be shared by two entities of a resource A "strong entity tag" MAY be shared by two entities of a resource
only if they are equivalent by octet equality. only if they are equivalent by octet equality.
A "weak entity tag," indicated by the "W/" prefix, MAY be shared by A "weak entity tag," indicated by the "W/" prefix, MAY be shared by
two entities of a resource only if the entities are equivalent and two entities of a resource only if the entities are equivalent and
could be substituted for each other with no significant change in could be substituted for each other with no significant change in
semantics. A weak entity tag can only be used for weak comparison. semantics. A weak entity tag can only be used for weak comparison.
An entity tag MUST be unique across all versions of all entities An entity tag MUST be unique across all versions of all entities
associated with a particular resource. A given entity tag value MAY associated with a particular resource. A given entity tag value MAY
be used for entities obtained by requests on different URIs. The use be used for entities obtained by requests on different URIs. The use
of the same entity tag value in conjunction with entities obtained by of the same entity tag value in conjunction with entities obtained by
requests on different URIs does not imply the equivalence of those requests on different URIs does not imply the equivalence of those
entities. entities.
3.12 Range Units 3.12. Range Units
HTTP/1.1 allows a client to request that only part (a range of) the HTTP/1.1 allows a client to request that only part (a range of) the
response entity be included within the response. HTTP/1.1 uses range response entity be included within the response. HTTP/1.1 uses range
units in the Range (section 14.35) and Content-Range (section 14.16) units in the Range (Section 14.35) and Content-Range (Section 14.16)
header fields. An entity can be broken down into subranges according header fields. An entity can be broken down into subranges according
to various structural units. to various structural units.
range-unit = bytes-unit | other-range-unit range-unit = bytes-unit | other-range-unit
bytes-unit = "bytes" bytes-unit = "bytes"
other-range-unit = token other-range-unit = token
The only range unit defined by HTTP/1.1 is "bytes". HTTP/1.1 The only range unit defined by HTTP/1.1 is "bytes". HTTP/1.1
implementations MAY ignore ranges specified using other units. implementations MAY ignore ranges specified using other units.
HTTP/1.1 has been designed to allow implementations of applications HTTP/1.1 has been designed to allow implementations of applications
that do not depend on knowledge of ranges. that do not depend on knowledge of ranges.
4 HTTP Message 4. HTTP Message
4.1 Message Types 4.1. Message Types
HTTP messages consist of requests from client to server and responses HTTP messages consist of requests from client to server and responses
from server to client. from server to client.
HTTP-message = Request | Response ; HTTP/1.1 messages HTTP-message = Request | Response ; HTTP/1.1 messages
Request (section 5) and Response (section 6) messages use the generic Request (Section 5) and Response (Section 6) messages use the generic
message format of RFC 822 [9] for transferring entities (the payload message format of RFC 822 [RFC822] for transferring entities (the
of the message). Both types of message consist of a start-line, zero payload of the message). Both types of message consist of a start-
or more header fields (also known as "headers"), an empty line (i.e., line, zero or more header fields (also known as "headers"), an empty
a line with nothing preceding the CRLF) indicating the end of the line (i.e., a line with nothing preceding the CRLF) indicating the
header fields, and possibly a message-body. end of the header fields, and possibly a message-body.
generic-message = start-line generic-message = start-line
*(message-header CRLF) *(message-header CRLF)
CRLF CRLF
[ message-body ] [ message-body ]
start-line = Request-Line | Status-Line start-line = Request-Line | Status-Line
In the interest of robustness, servers SHOULD ignore any empty In the interest of robustness, servers SHOULD ignore any empty
line(s) received where a Request-Line is expected. In other words, if line(s) received where a Request-Line is expected. In other words,
the server is reading the protocol stream at the beginning of a if the server is reading the protocol stream at the beginning of a
message and receives a CRLF first, it should ignore the CRLF. message and receives a CRLF first, it should ignore the CRLF.
Certain buggy HTTP/1.0 client implementations generate extra CRLF's Certain buggy HTTP/1.0 client implementations generate extra CRLF's
after a POST request. To restate what is explicitly forbidden by the after a POST request. To restate what is explicitly forbidden by the
BNF, an HTTP/1.1 client MUST NOT preface or follow a request with an BNF, an HTTP/1.1 client MUST NOT preface or follow a request with an
extra CRLF. extra CRLF.
4.2 Message Headers 4.2. Message Headers
HTTP header fields, which include general-header (section 4.5), HTTP header fields, which include general-header (Section 4.5),
request-header (section 5.3), response-header (section 6.2), and request-header (Section 5.3), response-header (Section 6.2), and
entity-header (section 7.1) fields, follow the same generic format as entity-header (Section 7.1) fields, follow the same generic format as
that given in Section 3.1 of RFC 822 [9]. Each header field consists that given in Section 3.1 of RFC 822 [RFC822]. Each header field
of a name followed by a colon (":") and the field value. Field names consists of a name followed by a colon (":") and the field value.
are case-insensitive. The field value MAY be preceded by any amount Field names are case-insensitive. The field value MAY be preceded by
of LWS, though a single SP is preferred. Header fields can be any amount of LWS, though a single SP is preferred. Header fields
extended over multiple lines by preceding each extra line with at can be extended over multiple lines by preceding each extra line with
least one SP or HT. Applications ought to follow "common form", where at least one SP or HT. Applications ought to follow "common form",
one is known or indicated, when generating HTTP constructs, since where one is known or indicated, when generating HTTP constructs,
there might exist some implementations that fail to accept anything since there might exist some implementations that fail to accept
beyond the common forms. anything beyond the common forms.
message-header = field-name ":" [ field-value ] message-header = field-name ":" [ field-value ]
field-name = token field-name = token
field-value = *( field-content | LWS ) field-value = *( field-content | LWS )
field-content = <the OCTETs making up the field-value field-content = <the OCTETs making up the field-value
and consisting of either *TEXT or combinations and consisting of either *TEXT or combinations
of token, separators, and quoted-string> of token, separators, and quoted-string>
The field-content does not include any leading or trailing LWS: The field-content does not include any leading or trailing LWS:
linear white space occurring before the first non-whitespace linear white space occurring before the first non-whitespace
skipping to change at page 32, line 38 skipping to change at page 35, line 37
present in a message if and only if the entire field-value for that present in a message if and only if the entire field-value for that
header field is defined as a comma-separated list [i.e., #(values)]. header field is defined as a comma-separated list [i.e., #(values)].
It MUST be possible to combine the multiple header fields into one It MUST be possible to combine the multiple header fields into one
"field-name: field-value" pair, without changing the semantics of the "field-name: field-value" pair, without changing the semantics of the
message, by appending each subsequent field-value to the first, each message, by appending each subsequent field-value to the first, each
separated by a comma. The order in which header fields with the same separated by a comma. The order in which header fields with the same
field-name are received is therefore significant to the field-name are received is therefore significant to the
interpretation of the combined field value, and thus a proxy MUST NOT interpretation of the combined field value, and thus a proxy MUST NOT
change the order of these field values when a message is forwarded. change the order of these field values when a message is forwarded.
4.3 Message Body 4.3. Message Body
The message-body (if any) of an HTTP message is used to carry the The message-body (if any) of an HTTP message is used to carry the
entity-body associated with the request or response. The message-body entity-body associated with the request or response. The message-
differs from the entity-body only when a transfer-coding has been body differs from the entity-body only when a transfer-coding has
applied, as indicated by the Transfer-Encoding header field (section been applied, as indicated by the Transfer-Encoding header field
14.41). (Section 14.41).
message-body = entity-body message-body = entity-body
| <entity-body encoded as per Transfer-Encoding> | <entity-body encoded as per Transfer-Encoding>
Transfer-Encoding MUST be used to indicate any transfer-codings Transfer-Encoding MUST be used to indicate any transfer-codings
applied by an application to ensure safe and proper transfer of the applied by an application to ensure safe and proper transfer of the
message. Transfer-Encoding is a property of the message, not of the message. Transfer-Encoding is a property of the message, not of the
entity, and thus MAY be added or removed by any application along the entity, and thus MAY be added or removed by any application along the
request/response chain. (However, section 3.6 places restrictions on request/response chain. (However, Section 3.6 places restrictions on
when certain transfer-codings may be used.) when certain transfer-codings may be used.)
The rules for when a message-body is allowed in a message differ for The rules for when a message-body is allowed in a message differ for
requests and responses. requests and responses.
The presence of a message-body in a request is signaled by the The presence of a message-body in a request is signaled by the
inclusion of a Content-Length or Transfer-Encoding header field in inclusion of a Content-Length or Transfer-Encoding header field in
the request's message-headers. A message-body MUST NOT be included in the request's message-headers. A message-body MUST NOT be included
a request if the specification of the request method (section 5.1.1) in a request if the specification of the request method
does not allow sending an entity-body in requests. A server SHOULD (Section 5.1.1) does not allow sending an entity-body in requests. A
read and forward a message-body on any request; if the request method server SHOULD read and forward a message-body on any request; if the
does not include defined semantics for an entity-body, then the request method does not include defined semantics for an entity-body,
message-body SHOULD be ignored when handling the request. then the message-body SHOULD be ignored when handling the request.
For response messages, whether or not a message-body is included with For response messages, whether or not a message-body is included with
a message is dependent on both the request method and the response a message is dependent on both the request method and the response
status code (section 6.1.1). All responses to the HEAD request method status code (Section 6.1.1). All responses to the HEAD request
MUST NOT include a message-body, even though the presence of entity- method MUST NOT include a message-body, even though the presence of
header fields might lead one to believe they do. All 1xx entity-header fields might lead one to believe they do. All 1xx
(informational), 204 (no content), and 304 (not modified) responses (informational), 204 (no content), and 304 (not modified) responses
MUST NOT include a message-body. All other responses do include a MUST NOT include a message-body. All other responses do include a
message-body, although it MAY be of zero length. message-body, although it MAY be of zero length.
4.4 Message Length 4.4. Message Length
The transfer-length of a message is the length of the message-body as The transfer-length of a message is the length of the message-body as
it appears in the message; that is, after any transfer-codings have it appears in the message; that is, after any transfer-codings have
been applied. When a message-body is included with a message, the been applied. When a message-body is included with a message, the
transfer-length of that body is determined by one of the following transfer-length of that body is determined by one of the following
(in order of precedence): (in order of precedence):
1.Any response message which "MUST NOT" include a message-body (such 1. Any response message which "MUST NOT" include a message-body
as the 1xx, 204, and 304 responses and any response to a HEAD (such as the 1xx, 204, and 304 responses and any response to a
request) is always terminated by the first empty line after the HEAD request) is always terminated by the first empty line after
header fields, regardless of the entity-header fields present in the header fields, regardless of the entity-header fields present
the message. in the message.
2.If a Transfer-Encoding header field (section 14.41) is present and 2. If a Transfer-Encoding header field (Section 14.41) is present
has any value other than "identity", then the transfer-length is and has any value other than "identity", then the transfer-length
defined by use of the "chunked" transfer-coding (section 3.6), is defined by use of the "chunked" transfer-coding (Section 3.6),
unless the message is terminated by closing the connection. unless the message is terminated by closing the connection.
3.If a Content-Length header field (section 14.13) is present, its 3. If a Content-Length header field (Section 14.13) is present, its
decimal value in OCTETs represents both the entity-length and the decimal value in OCTETs represents both the entity-length and the
transfer-length. The Content-Length header field MUST NOT be sent transfer-length. The Content-Length header field MUST NOT be
if these two lengths are different (i.e., if a Transfer-Encoding sent if these two lengths are different (i.e., if a Transfer-
header field is present). If a message is received with both a Encoding header field is present). If a message is received with
Transfer-Encoding header field and a Content-Length header field, both a Transfer-Encoding header field and a Content-Length header
the latter MUST be ignored. field, the latter MUST be ignored.
4.If the message uses the media type "multipart/byteranges", and the 4. If the message uses the media type "multipart/byteranges", and
ransfer-length is not otherwise specified, then this self- the ransfer-length is not otherwise specified, then this self-
elimiting media type defines the transfer-length. This media type elimiting media type defines the transfer-length. This media
UST NOT be used unless the sender knows that the recipient can arse type UST NOT be used unless the sender knows that the recipient
it; the presence in a request of a Range header with ultiple byte- can arse it; the presence in a request of a Range header with
range specifiers from a 1.1 client implies that the lient can parse ultiple byte-range specifiers from a 1.1 client implies that the
multipart/byteranges responses. lient can parse multipart/byteranges responses.
A range header might be forwarded by a 1.0 proxy that does not A range header might be forwarded by a 1.0 proxy that does not
understand multipart/byteranges; in this case the server MUST understand multipart/byteranges; in this case the server MUST
delimit the message using methods defined in items 1,3 or 5 of delimit the message using methods defined in items 1, 3 or 5
this section. of this section.
5.By the server closing the connection. (Closing the connection 5.By the server closing the connection. (Closing the connection
cannot be used to indicate the end of a request body, since that cannot be used to indicate the end of a request body, since that
would leave no possibility for the server to send back a response.) would leave no possibility for the server to send back a
response.)
For compatibility with HTTP/1.0 applications, HTTP/1.1 requests For compatibility with HTTP/1.0 applications, HTTP/1.1 requests
containing a message-body MUST include a valid Content-Length header containing a message-body MUST include a valid Content-Length header
field unless the server is known to be HTTP/1.1 compliant. If a field unless the server is known to be HTTP/1.1 compliant. If a
request contains a message-body and a Content-Length is not given, request contains a message-body and a Content-Length is not given,
the server SHOULD respond with 400 (bad request) if it cannot the server SHOULD respond with 400 (bad request) if it cannot
determine the length of the message, or with 411 (length required) if determine the length of the message, or with 411 (length required) if
it wishes to insist on receiving a valid Content-Length. it wishes to insist on receiving a valid Content-Length.
All HTTP/1.1 applications that receive entities MUST accept the All HTTP/1.1 applications that receive entities MUST accept the
"chunked" transfer-coding (section 3.6), thus allowing this mechanism "chunked" transfer-coding (Section 3.6), thus allowing this mechanism
to be used for messages when the message length cannot be determined to be used for messages when the message length cannot be determined
in advance. in advance.
Messages MUST NOT include both a Content-Length header field and a Messages MUST NOT include both a Content-Length header field and a
non-identity transfer-coding. If the message does include a non- non-identity transfer-coding. If the message does include a non-
identity transfer-coding, the Content-Length MUST be ignored. identity transfer-coding, the Content-Length MUST be ignored.
When a Content-Length is given in a message where a message-body is When a Content-Length is given in a message where a message-body is
allowed, its field value MUST exactly match the number of OCTETs in allowed, its field value MUST exactly match the number of OCTETs in
the message-body. HTTP/1.1 user agents MUST notify the user when an the message-body. HTTP/1.1 user agents MUST notify the user when an
invalid length is received and detected. invalid length is received and detected.
4.5 General Header Fields 4.5. General Header Fields
There are a few header fields which have general applicability for There are a few header fields which have general applicability for
both request and response messages, but which do not apply to the both request and response messages, but which do not apply to the
entity being transferred. These header fields apply only to the entity being transferred. These header fields apply only to the
message being transmitted. message being transmitted.
general-header = Cache-Control ; Section 14.9 general-header = Cache-Control ; Section 14.9
| Connection ; Section 14.10 | Connection ; Section 14.10
| Date ; Section 14.18 | Date ; Section 14.18
| Pragma ; Section 14.32 | Pragma ; Section 14.32
skipping to change at page 35, line 23 skipping to change at page 38, line 22
| Via ; Section 14.45 | Via ; Section 14.45
| Warning ; Section 14.46 | Warning ; Section 14.46
General-header field names can be extended reliably only in General-header field names can be extended reliably only in
combination with a change in the protocol version. However, new or combination with a change in the protocol version. However, new or
experimental header fields may be given the semantics of general experimental header fields may be given the semantics of general
header fields if all parties in the communication recognize them to header fields if all parties in the communication recognize them to
be general-header fields. Unrecognized header fields are treated as be general-header fields. Unrecognized header fields are treated as
entity-header fields. entity-header fields.
5 Request 5. Request
A request message from a client to a server includes, within the A request message from a client to a server includes, within the
first line of that message, the method to be applied to the resource, first line of that message, the method to be applied to the resource,
the identifier of the resource, and the protocol version in use. the identifier of the resource, and the protocol version in use.
Request = Request-Line ; Section 5.1 Request = Request-Line ; Section 5.1
*(( general-header ; Section 4.5 *(( general-header ; Section 4.5
| request-header ; Section 5.3 | request-header ; Section 5.3
| entity-header ) CRLF) ; Section 7.1 | entity-header ) CRLF) ; Section 7.1
CRLF CRLF
[ message-body ] ; Section 4.3 [ message-body ] ; Section 4.3
5.1 Request-Line 5.1. Request-Line
The Request-Line begins with a method token, followed by the The Request-Line begins with a method token, followed by the Request-
Request-URI and the protocol version, and ending with CRLF. The URI and the protocol version, and ending with CRLF. The elements are
elements are separated by SP characters. No CR or LF is allowed separated by SP characters. No CR or LF is allowed except in the
except in the final CRLF sequence. final CRLF sequence.
Request-Line = Method SP Request-URI SP HTTP-Version CRLF Request-Line = Method SP Request-URI SP HTTP-Version CRLF
5.1.1 Method 5.1.1. Method
The Method token indicates the method to be performed on the The Method token indicates the method to be performed on the resource
resource identified by the Request-URI. The method is case-sensitive. identified by the Request-URI. The method is case-sensitive.
Method = "OPTIONS" ; Section 9.2 Method = "OPTIONS" ; Section 9.2
| "GET" ; Section 9.3 | "GET" ; Section 9.3
| "HEAD" ; Section 9.4 | "HEAD" ; Section 9.4
| "POST" ; Section 9.5 | "POST" ; Section 9.5
| "PUT" ; Section 9.6 | "PUT" ; Section 9.6
| "DELETE" ; Section 9.7 | "DELETE" ; Section 9.7
| "TRACE" ; Section 9.8 | "TRACE" ; Section 9.8
| "CONNECT" ; Section 9.9 | "CONNECT" ; Section 9.9
| extension-method | extension-method
extension-method = token extension-method = token
The list of methods allowed by a resource can be specified in an The list of methods allowed by a resource can be specified in an
Allow header field (section 14.7). The return code of the response Allow header field (Section 14.7). The return code of the response
always notifies the client whether a method is currently allowed on a always notifies the client whether a method is currently allowed on a
resource, since the set of allowed methods can change dynamically. An resource, since the set of allowed methods can change dynamically.
origin server SHOULD return the status code 405 (Method Not Allowed) An origin server SHOULD return the status code 405 (Method Not
if the method is known by the origin server but not allowed for the Allowed) if the method is known by the origin server but not allowed
requested resource, and 501 (Not Implemented) if the method is for the requested resource, and 501 (Not Implemented) if the method
unrecognized or not implemented by the origin server. The methods GET is unrecognized or not implemented by the origin server. The methods
and HEAD MUST be supported by all general-purpose servers. All other GET and HEAD MUST be supported by all general-purpose servers. All
methods are OPTIONAL; however, if the above methods are implemented, other methods are OPTIONAL; however, if the above methods are
they MUST be implemented with the same semantics as those specified implemented, they MUST be implemented with the same semantics as
in section 9. those specified in Section 9.
5.1.2 Request-URI 5.1.2. Request-URI
The Request-URI is a Uniform Resource Identifier (section 3.2) and The Request-URI is a Uniform Resource Identifier (Section 3.2) and
identifies the resource upon which to apply the request. identifies the resource upon which to apply the request.
Request-URI = "*" | absoluteURI | abs_path | authority Request-URI = "*" | absoluteURI | abs_path | authority
The four options for Request-URI are dependent on the nature of the The four options for Request-URI are dependent on the nature of the
request. The asterisk "*" means that the request does not apply to a request. The asterisk "*" means that the request does not apply to a
particular resource, but to the server itself, and is only allowed particular resource, but to the server itself, and is only allowed
when the method used does not necessarily apply to a resource. One when the method used does not necessarily apply to a resource. One
example would be example would be
OPTIONS * HTTP/1.1 OPTIONS * HTTP/1.1
The absoluteURI form is REQUIRED when the request is being made to a The absoluteURI form is REQUIRED when the request is being made to a
proxy. The proxy is requested to forward the request or service it proxy. The proxy is requested to forward the request or service it
from a valid cache, and return the response. Note that the proxy MAY from a valid cache, and return the response. Note that the proxy MAY
forward the request on to another proxy or directly to the server forward the request on to another proxy or directly to the server
specified by the absoluteURI. In order to avoid request loops, a specified by the absoluteURI. In order to avoid request loops, a
proxy MUST be able to recognize all of its server names, including proxy MUST be able to recognize all of its server names, including
any aliases, local variations, and the numeric IP address. An example any aliases, local variations, and the numeric IP address. An
Request-Line would be: example Request-Line would be:
GET http://www.w3.org/pub/WWW/TheProject.html HTTP/1.1 GET http://www.w3.org/pub/WWW/TheProject.html HTTP/1.1
To allow for transition to absoluteURIs in all requests in future To allow for transition to absoluteURIs in all requests in future
versions of HTTP, all HTTP/1.1 servers MUST accept the absoluteURI versions of HTTP, all HTTP/1.1 servers MUST accept the absoluteURI
form in requests, even though HTTP/1.1 clients will only generate form in requests, even though HTTP/1.1 clients will only generate
them in requests to proxies. them in requests to proxies.
The authority form is only used by the CONNECT method (section 9.9). The authority form is only used by the CONNECT method (Section 9.9).
The most common form of Request-URI is that used to identify a The most common form of Request-URI is that used to identify a
resource on an origin server or gateway. In this case the absolute resource on an origin server or gateway. In this case the absolute
path of the URI MUST be transmitted (see section 3.2.1, abs_path) as path of the URI MUST be transmitted (see Section 3.2.1, abs_path) as
the Request-URI, and the network location of the URI (authority) MUST the Request-URI, and the network location of the URI (authority) MUST
be transmitted in a Host header field. For example, a client wishing be transmitted in a Host header field. For example, a client wishing
to retrieve the resource above directly from the origin server would to retrieve the resource above directly from the origin server would
create a TCP connection to port 80 of the host "www.w3.org" and send create a TCP connection to port 80 of the host "www.w3.org" and send
the lines: the lines:
GET /pub/WWW/TheProject.html HTTP/1.1 GET /pub/WWW/TheProject.html HTTP/1.1
Host: www.w3.org Host: www.w3.org
followed by the remainder of the Request. Note that the absolute path followed by the remainder of the Request. Note that the absolute
cannot be empty; if none is present in the original URI, it MUST be path cannot be empty; if none is present in the original URI, it MUST
given as "/" (the server root). be given as "/" (the server root).
The Request-URI is transmitted in the format specified in section The Request-URI is transmitted in the format specified in
3.2.1. If the Request-URI is encoded using the "% HEX HEX" encoding Section 3.2.1. If the Request-URI is encoded using the "% HEX HEX"
[42], the origin server MUST decode the Request-URI in order to encoding [RFC2396], the origin server MUST decode the Request-URI in
properly interpret the request. Servers SHOULD respond to invalid order to properly interpret the request. Servers SHOULD respond to
Request-URIs with an appropriate status code. invalid Request-URIs with an appropriate status code.
A transparent proxy MUST NOT rewrite the "abs_path" part of the A transparent proxy MUST NOT rewrite the "abs_path" part of the
received Request-URI when forwarding it to the next inbound server, received Request-URI when forwarding it to the next inbound server,
except as noted above to replace a null abs_path with "/". except as noted above to replace a null abs_path with "/".
Note: The "no rewrite" rule prevents the proxy from changing the Note: The "no rewrite" rule prevents the proxy from changing the
meaning of the request when the origin server is improperly using meaning of the request when the origin server is improperly using
a non-reserved URI character for a reserved purpose. Implementors a non-reserved URI character for a reserved purpose. Implementors
should be aware that some pre-HTTP/1.1 proxies have been known to should be aware that some pre-HTTP/1.1 proxies have been known to
rewrite the Request-URI. rewrite the Request-URI.
5.2 The Resource Identified by a Request 5.2. The Resource Identified by a Request
The exact resource identified by an Internet request is determined by The exact resource identified by an Internet request is determined by
examining both the Request-URI and the Host header field. examining both the Request-URI and the Host header field.
An origin server that does not allow resources to differ by the An origin server that does not allow resources to differ by the
requested host MAY ignore the Host header field value when requested host MAY ignore the Host header field value when
determining the resource identified by an HTTP/1.1 request. (But see determining the resource identified by an HTTP/1.1 request. (But see
section 19.6.1.1 for other requirements on Host support in HTTP/1.1.) Appendix A.6.1.1 for other requirements on Host support in HTTP/1.1.)
An origin server that does differentiate resources based on the host An origin server that does differentiate resources based on the host
requested (sometimes referred to as virtual hosts or vanity host requested (sometimes referred to as virtual hosts or vanity host
names) MUST use the following rules for determining the requested names) MUST use the following rules for determining the requested
resource on an HTTP/1.1 request: resource on an HTTP/1.1 request:
1. If Request-URI is an absoluteURI, the host is part of the 1. If Request-URI is an absoluteURI, the host is part of the
Request-URI. Any Host header field value in the request MUST be Request-URI. Any Host header field value in the request MUST be
ignored. ignored.
2. If the Request-URI is not an absoluteURI, and the request includes 2. If the Request-URI is not an absoluteURI, and the request
a Host header field, the host is determined by the Host header includes a Host header field, the host is determined by the Host
field value. header field value.
3. If the host as determined by rule 1 or 2 is not a valid host on 3. If the host as determined by rule 1 or 2 is not a valid host on
the server, the response MUST be a 400 (Bad Request) error message. the server, the response MUST be a 400 (Bad Request) error
message.
Recipients of an HTTP/1.0 request that lacks a Host header field MAY Recipients of an HTTP/1.0 request that lacks a Host header field MAY
attempt to use heuristics (e.g., examination of the URI path for attempt to use heuristics (e.g., examination of the URI path for
something unique to a particular host) in order to determine what something unique to a particular host) in order to determine what
exact resource is being requested. exact resource is being requested.
5.3 Request Header Fields 5.3. Request Header Fields
The request-header fields allow the client to pass additional The request-header fields allow the client to pass additional
information about the request, and about the client itself, to the information about the request, and about the client itself, to the
server. These fields act as request modifiers, with semantics server. These fields act as request modifiers, with semantics
equivalent to the parameters on a programming language method equivalent to the parameters on a programming language method
invocation. invocation.
request-header = Accept ; Section 14.1 request-header = Accept ; Section 14.1
| Accept-Charset ; Section 14.2 | Accept-Charset ; Section 14.2
| Accept-Encoding ; Section 14.3 | Accept-Encoding ; Section 14.3
skipping to change at page 39, line 22 skipping to change at page 42, line 32
| TE ; Section 14.39 | TE ; Section 14.39
| User-Agent ; Section 14.43 | User-Agent ; Section 14.43
Request-header field names can be extended reliably only in Request-header field names can be extended reliably only in
combination with a change in the protocol version. However, new or combination with a change in the protocol version. However, new or
experimental header fields MAY be given the semantics of request- experimental header fields MAY be given the semantics of request-
header fields if all parties in the communication recognize them to header fields if all parties in the communication recognize them to
be request-header fields. Unrecognized header fields are treated as be request-header fields. Unrecognized header fields are treated as
entity-header fields. entity-header fields.
6 Response 6. Response
After receiving and interpreting a request message, a server responds After receiving and interpreting a request message, a server responds
with an HTTP response message. with an HTTP response message.
Response = Status-Line ; Section 6.1 Response = Status-Line ; Section 6.1
*(( general-header ; Section 4.5 *(( general-header ; Section 4.5
| response-header ; Section 6.2 | response-header ; Section 6.2
| entity-header ) CRLF) ; Section 7.1 | entity-header ) CRLF) ; Section 7.1
CRLF CRLF
[ message-body ] ; Section 7.2 [ message-body ] ; Section 7.2
6.1 Status-Line 6.1. Status-Line
The first line of a Response message is the Status-Line, consisting The first line of a Response message is the Status-Line, consisting
of the protocol version followed by a numeric status code and its of the protocol version followed by a numeric status code and its
associated textual phrase, with each element separated by SP associated textual phrase, with each element separated by SP
characters. No CR or LF is allowed except in the final CRLF sequence. characters. No CR or LF is allowed except in the final CRLF
sequence.
Status-Line = HTTP-Version SP Status-Code SP Reason-Phrase CRLF Status-Line = HTTP-Version SP Status-Code SP Reason-Phrase CRLF
6.1.1 Status Code and Reason Phrase 6.1.1. Status Code and Reason Phrase
The Status-Code element is a 3-digit integer result code of the The Status-Code element is a 3-digit integer result code of the
attempt to understand and satisfy the request. These codes are fully attempt to understand and satisfy the request. These codes are fully
defined in section 10. The Reason-Phrase is intended to give a short defined in Section 10. The Reason-Phrase is intended to give a short
textual description of the Status-Code. The Status-Code is intended textual description of the Status-Code. The Status-Code is intended
for use by automata and the Reason-Phrase is intended for the human for use by automata and the Reason-Phrase is intended for the human
user. The client is not required to examine or display the Reason- user. The client is not required to examine or display the Reason-
Phrase. Phrase.
The first digit of the Status-Code defines the class of response. The The first digit of the Status-Code defines the class of response.
last two digits do not have any categorization role. There are 5 The last two digits do not have any categorization role. There are 5
values for the first digit: values for the first digit:
- 1xx: Informational - Request received, continuing process o 1xx: Informational - Request received, continuing process
- 2xx: Success - The action was successfully received, o 2xx: Success - The action was successfully received, understood,
understood, and accepted and accepted
- 3xx: Redirection - Further action must be taken in order to o 3xx: Redirection - Further action must be taken in order to
complete the request complete the request
- 4xx: Client Error - The request contains bad syntax or cannot o 4xx: Client Error - The request contains bad syntax or cannot be
be fulfilled fulfilled
- 5xx: Server Error - The server failed to fulfill an apparently o 5xx: Server Error - The server failed to fulfill an apparently
valid request valid request
The individual values of the numeric status codes defined for The individual values of the numeric status codes defined for
HTTP/1.1, and an example set of corresponding Reason-Phrase's, are HTTP/1.1, and an example set of corresponding Reason-Phrase's, are
presented below. The reason phrases listed here are only presented below. The reason phrases listed here are only
recommendations -- they MAY be replaced by local equivalents without recommendations -- they MAY be replaced by local equivalents without
affecting the protocol. affecting the protocol.
Status-Code = Status-Code =
"100" ; Section 10.1.1: Continue "100" ; Section 10.1.1: Continue
skipping to change at page 41, line 40 skipping to change at page 45, line 16
digit, and treat any unrecognized response as being equivalent to the digit, and treat any unrecognized response as being equivalent to the
x00 status code of that class, with the exception that an x00 status code of that class, with the exception that an
unrecognized response MUST NOT be cached. For example, if an unrecognized response MUST NOT be cached. For example, if an
unrecognized status code of 431 is received by the client, it can unrecognized status code of 431 is received by the client, it can
safely assume that there was something wrong with its request and safely assume that there was something wrong with its request and
treat the response as if it had received a 400 status code. In such treat the response as if it had received a 400 status code. In such
cases, user agents SHOULD present to the user the entity returned cases, user agents SHOULD present to the user the entity returned
with the response, since that entity is likely to include human- with the response, since that entity is likely to include human-
readable information which will explain the unusual status. readable information which will explain the unusual status.
6.2 Response Header Fields 6.2. Response Header Fields
The response-header fields allow the server to pass additional The response-header fields allow the server to pass additional
information about the response which cannot be placed in the Status- information about the response which cannot be placed in the Status-
Line. These header fields give information about the server and about Line. These header fields give information about the server and
further access to the resource identified by the Request-URI. about further access to the resource identified by the Request-URI.
response-header = Accept-Ranges ; Section 14.5 response-header = Accept-Ranges ; Section 14.5
| Age ; Section 14.6 | Age ; Section 14.6
| ETag ; Section 14.19 | ETag ; Section 14.19
| Location ; Section 14.30 | Location ; Section 14.30
| Proxy-Authenticate ; Section 14.33 | Proxy-Authenticate ; Section 14.33
| Retry-After ; Section 14.37 | Retry-After ; Section 14.37
| Server ; Section 14.38 | Server ; Section 14.38
| Vary ; Section 14.44 | Vary ; Section 14.44
| WWW-Authenticate ; Section 14.47 | WWW-Authenticate ; Section 14.47
Response-header field names can be extended reliably only in Response-header field names can be extended reliably only in
combination with a change in the protocol version. However, new or combination with a change in the protocol version. However, new or
experimental header fields MAY be given the semantics of response- experimental header fields MAY be given the semantics of response-
header fields if all parties in the communication recognize them to header fields if all parties in the communication recognize them to
be response-header fields. Unrecognized header fields are treated as be response-header fields. Unrecognized header fields are treated as
entity-header fields. entity-header fields.
7 Entity 7. Entity
Request and Response messages MAY transfer an entity if not otherwise Request and Response messages MAY transfer an entity if not otherwise
restricted by the request method or response status code. An entity restricted by the request method or response status code. An entity
consists of entity-header fields and an entity-body, although some consists of entity-header fields and an entity-body, although some
responses will only include the entity-headers. responses will only include the entity-headers.
In this section, both sender and recipient refer to either the client In this section, both sender and recipient refer to either the client
or the server, depending on who sends and who receives the entity. or the server, depending on who sends and who receives the entity.
7.1 Entity Header Fields 7.1. Entity Header Fields
Entity-header fields define metainformation about the entity-body or, Entity-header fields define metainformation about the entity-body or,
if no body is present, about the resource identified by the request. if no body is present, about the resource identified by the request.
Some of this metainformation is OPTIONAL; some might be REQUIRED by Some of this metainformation is OPTIONAL; some might be REQUIRED by
portions of this specification. portions of this specification.
entity-header = Allow ; Section 14.7 entity-header = Allow ; Section 14.7
| Content-Encoding ; Section 14.11 | Content-Encoding ; Section 14.11
| Content-Language ; Section 14.12 | Content-Language ; Section 14.12
| Content-Length ; Section 14.13 | Content-Length ; Section 14.13
skipping to change at page 43, line 5 skipping to change at page 46, line 32
| extension-header | extension-header
extension-header = message-header extension-header = message-header
The extension-header mechanism allows additional entity-header fields The extension-header mechanism allows additional entity-header fields
to be defined without changing the protocol, but these fields cannot to be defined without changing the protocol, but these fields cannot
be assumed to be recognizable by the recipient. Unrecognized header be assumed to be recognizable by the recipient. Unrecognized header
fields SHOULD be ignored by the recipient and MUST be forwarded by fields SHOULD be ignored by the recipient and MUST be forwarded by
transparent proxies. transparent proxies.
7.2 Entity Body 7.2. Entity Body
The entity-body (if any) sent with an HTTP request or response is in The entity-body (if any) sent with an HTTP request or response is in
a format and encoding defined by the entity-header fields. a format and encoding defined by the entity-header fields.
entity-body = *OCTET entity-body = *OCTET
An entity-body is only present in a message when a message-body is An entity-body is only present in a message when a message-body is
present, as described in section 4.3. The entity-body is obtained present, as described in Section 4.3. The entity-body is obtained
from the message-body by decoding any Transfer-Encoding that might from the message-body by decoding any Transfer-Encoding that might
have been applied to ensure safe and proper transfer of the message. have been applied to ensure safe and proper transfer of the message.
7.2.1 Type 7.2.1. Type
When an entity-body is included with a message, the data type of that When an entity-body is included with a message, the data type of that
body is determined via the header fields Content-Type and Content- body is determined via the header fields Content-Type and Content-
Encoding. These define a two-layer, ordered encoding model: Encoding. These define a two-layer, ordered encoding model:
entity-body := Content-Encoding( Content-Type( data ) ) entity-body := Content-Encoding( Content-Type( data ) )
Content-Type specifies the media type of the underlying data. Content-Type specifies the media type of the underlying data.
Content-Encoding may be used to indicate any additional content Content-Encoding may be used to indicate any additional content
codings applied to the data, usually for the purpose of data codings applied to the data, usually for the purpose of data
compression, that are a property of the requested resource. There is compression, that are a property of the requested resource. There is
no default encoding. no default encoding.
Any HTTP/1.1 message containing an entity-body SHOULD include a Any HTTP/1.1 message containing an entity-body SHOULD include a
Content-Type header field defining the media type of that body. If Content-Type header field defining the media type of that body. If
and only if the media type is not given by a Content-Type field, the and only if the media type is not given by a Content-Type field, the
recipient MAY attempt to guess the media type via inspection of its recipient MAY attempt to guess the media type via inspection of its
content and/or the name extension(s) of the URI used to identify the content and/or the name extension(s) of the URI used to identify the
skipping to change at page 43, line 39 skipping to change at page 47, line 18
no default encoding. no default encoding.
Any HTTP/1.1 message containing an entity-body SHOULD include a Any HTTP/1.1 message containing an entity-body SHOULD include a
Content-Type header field defining the media type of that body. If Content-Type header field defining the media type of that body. If
and only if the media type is not given by a Content-Type field, the and only if the media type is not given by a Content-Type field, the
recipient MAY attempt to guess the media type via inspection of its recipient MAY attempt to guess the media type via inspection of its
content and/or the name extension(s) of the URI used to identify the content and/or the name extension(s) of the URI used to identify the
resource. If the media type remains unknown, the recipient SHOULD resource. If the media type remains unknown, the recipient SHOULD
treat it as type "application/octet-stream". treat it as type "application/octet-stream".
7.2.2 Entity Length 7.2.2. Entity Length
The entity-length of a message is the length of the message-body The entity-length of a message is the length of the message-body
before any transfer-codings have been applied. Section 4.4 defines before any transfer-codings have been applied. Section 4.4 defines
how the transfer-length of a message-body is determined. how the transfer-length of a message-body is determined.
8 Connections 8. Connections
8.1 Persistent Connections 8.1. Persistent Connections
8.1.1 Purpose 8.1.1. Purpose
Prior to persistent connections, a separate TCP connection was Prior to persistent connections, a separate TCP connection was
established to fetch each URL, increasing the load on HTTP servers established to fetch each URL, increasing the load on HTTP servers
and causing congestion on the Internet. The use of inline images and and causing congestion on the Internet. The use of inline images and
other associated data often require a client to make multiple other associated data often require a client to make multiple
requests of the same server in a short amount of time. Analysis of requests of the same server in a short amount of time. Analysis of
these performance problems and results from a prototype these performance problems and results from a prototype
implementation are available [26] [30]. Implementation experience and implementation are available [Pad1995] [Spe]. Implementation
measurements of actual HTTP/1.1 (RFC 2068) implementations show good experience and measurements of actual HTTP/1.1 (RFC 2068)
results [39]. Alternatives have also been explored, for example, implementations show good results [Nie1997]. Alternatives have also
T/TCP [27]. been explored, for example, T/TCP [Tou1998].
Persistent HTTP connections have a number of advantages: Persistent HTTP connections have a number of advantages:
- By opening and closing fewer TCP connections, CPU time is saved o By opening and closing fewer TCP connections, CPU time is saved in
in routers and hosts (clients, servers, proxies, gateways, routers and hosts (clients, servers, proxies, gateways, tunnels,
tunnels, or caches), and memory used for TCP protocol control or caches), and memory used for TCP protocol control blocks can be
blocks can be saved in hosts. saved in hosts.
- HTTP requests and responses can be pipelined on a connection. o HTTP requests and responses can be pipelined on a connection.
Pipelining allows a client to make multiple requests without Pipelining allows a client to make multiple requests without
waiting for each response, allowing a single TCP connection to waiting for each response, allowing a single TCP connection to be
be used much more efficiently, with much lower elapsed time. used much more efficiently, with much lower elapsed time.
- Network congestion is reduced by reducing the number of packets o Network congestion is reduced by reducing the number of packets
caused by TCP opens, and by allowing TCP sufficient time to caused by TCP opens, and by allowing TCP sufficient time to
determine the congestion state of the network. determine the congestion state of the network.
- Latency on subsequent requests is reduced since there is no time o Latency on subsequent requests is reduced since there is no time
spent in TCP's connection opening handshake. spent in TCP's connection opening handshake.
- HTTP can evolve more gracefully, since errors can be reported o HTTP can evolve more gracefully, since errors can be reported
without the penalty of closing the TCP connection. Clients using without the penalty of closing the TCP connection. Clients using
future versions of HTTP might optimistically try a new feature, future versions of HTTP might optimistically try a new feature,
but if communicating with an older server, retry with old but if communicating with an older server, retry with old
semantics after an error is reported. semantics after an error is reported.
HTTP implementations SHOULD implement persistent connections. HTTP implementations SHOULD implement persistent connections.
8.1.2 Overall Operation 8.1.2. Overall Operation
A significant difference between HTTP/1.1 and earlier versions of A significant difference between HTTP/1.1 and earlier versions of
HTTP is that persistent connections are the default behavior of any HTTP is that persistent connections are the default behavior of any
HTTP connection. That is, unless otherwise indicated, the client HTTP connection. That is, unless otherwise indicated, the client
SHOULD assume that the server will maintain a persistent connection, SHOULD assume that the server will maintain a persistent connection,
even after error responses from the server. even after error responses from the server.
Persistent connections provide a mechanism by which a client and a Persistent connections provide a mechanism by which a client and a
server can signal the close of a TCP connection. This signaling takes server can signal the close of a TCP connection. This signaling
place using the Connection header field (section 14.10). Once a close takes place using the Connection header field (Section 14.10). Once
has been signaled, the client MUST NOT send any more requests on that a close has been signaled, the client MUST NOT send any more requests
connection. on that connection.
8.1.2.1 Negotiation 8.1.2.1. Negotiation
An HTTP/1.1 server MAY assume that a HTTP/1.1 client intends to An HTTP/1.1 server MAY assume that a HTTP/1.1 client intends to
maintain a persistent connection unless a Connection header including maintain a persistent connection unless a Connection header including
the connection-token "close" was sent in the request. If the server the connection-token "close" was sent in the request. If the server
chooses to close the connection immediately after sending the chooses to close the connection immediately after sending the
response, it SHOULD send a Connection header including the response, it SHOULD send a Connection header including the
connection-token close. connection-token close.
An HTTP/1.1 client MAY expect a connection to remain open, but would An HTTP/1.1 client MAY expect a connection to remain open, but would
decide to keep it open based on whether the response from a server decide to keep it open based on whether the response from a server
contains a Connection header with the connection-token close. In case contains a Connection header with the connection-token close. In
the client does not want to maintain a connection for more than that case the client does not want to maintain a connection for more than
request, it SHOULD send a Connection header including the that request, it SHOULD send a Connection header including the
connection-token close. connection-token close.
If either the client or the server sends the close token in the If either the client or the server sends the close token in the
Connection header, that request becomes the last one for the Connection header, that request becomes the last one for the
connection. connection.
Clients and servers SHOULD NOT assume that a persistent connection is Clients and servers SHOULD NOT assume that a persistent connection is
maintained for HTTP versions less than 1.1 unless it is explicitly maintained for HTTP versions less than 1.1 unless it is explicitly
signaled. See section 19.6.2 for more information on backward signaled. See Appendix A.6.2 for more information on backward
compatibility with HTTP/1.0 clients. compatibility with HTTP/1.0 clients.
In order to remain persistent, all messages on the connection MUST In order to remain persistent, all messages on the connection MUST
have a self-defined message length (i.e., one not defined by closure have a self-defined message length (i.e., one not defined by closure
of the connection), as described in section 4.4. of the connection), as described in Section 4.4.
8.1.2.2 Pipelining 8.1.2.2. Pipelining
A client that supports persistent connections MAY "pipeline" its A client that supports persistent connections MAY "pipeline" its
requests (i.e., send multiple requests without waiting for each requests (i.e., send multiple requests without waiting for each
response). A server MUST send its responses to those requests in the response). A server MUST send its responses to those requests in the
same order that the requests were received. same order that the requests were received.
Clients which assume persistent connections and pipeline immediately Clients which assume persistent connections and pipeline immediately
after connection establishment SHOULD be prepared to retry their after connection establishment SHOULD be prepared to retry their
connection if the first pipelined attempt fails. If a client does connection if the first pipelined attempt fails. If a client does
such a retry, it MUST NOT pipeline before it knows the connection is such a retry, it MUST NOT pipeline before it knows the connection is
persistent. Clients MUST also be prepared to resend their requests if persistent. Clients MUST also be prepared to resend their requests
the server closes the connection before sending all of the if the server closes the connection before sending all of the
corresponding responses. corresponding responses.
Clients SHOULD NOT pipeline requests using non-idempotent methods or Clients SHOULD NOT pipeline requests using non-idempotent methods or
non-idempotent sequences of methods (see section 9.1.2). Otherwise, a non-idempotent sequences of methods (see Section 9.1.2). Otherwise,
premature termination of the transport connection could lead to a premature termination of the transport connection could lead to
indeterminate results. A client wishing to send a non-idempotent indeterminate results. A client wishing to send a non-idempotent
request SHOULD wait to send that request until it has received the request SHOULD wait to send that request until it has received the
response status for the previous request. response status for the previous request.
8.1.3 Proxy Servers 8.1.3. Proxy Servers
It is especially important that proxies correctly implement the It is especially important that proxies correctly implement the
properties of the Connection header field as specified in section properties of the Connection header field as specified in
14.10. Section 14.10.
The proxy server MUST signal persistent connections separately with The proxy server MUST signal persistent connections separately with
its clients and the origin servers (or other proxy servers) that it its clients and the origin servers (or other proxy servers) that it
connects to. Each persistent connection applies to only one transport connects to. Each persistent connection applies to only one
link. transport link.
A proxy server MUST NOT establish a HTTP/1.1 persistent connection A proxy server MUST NOT establish a HTTP/1.1 persistent connection
with an HTTP/1.0 client (but see RFC 2068 [33] for information and with an HTTP/1.0 client (but see RFC 2068 [RFC2068] for information
discussion of the problems with the Keep-Alive header implemented by and discussion of the problems with the Keep-Alive header implemented
many HTTP/1.0 clients). by many HTTP/1.0 clients).
8.1.4 Practical Considerations 8.1.4. Practical Considerations
Servers will usually have some time-out value beyond which they will Servers will usually have some time-out value beyond which they will
no longer maintain an inactive connection. Proxy servers might make no longer maintain an inactive connection. Proxy servers might make
this a higher value since it is likely that the client will be making this a higher value since it is likely that the client will be making
more connections through the same server. The use of persistent more connections through the same server. The use of persistent
connections places no requirements on the length (or existence) of connections places no requirements on the length (or existence) of
this time-out for either the client or the server. this time-out for either the client or the server.
When a client or server wishes to time-out it SHOULD issue a graceful When a client or server wishes to time-out it SHOULD issue a graceful
close on the transport connection. Clients and servers SHOULD both close on the transport connection. Clients and servers SHOULD both
skipping to change at page 47, line 23 skipping to change at page 50, line 32
time. For example, a client might have started to send a new request time. For example, a client might have started to send a new request
at the same time that the server has decided to close the "idle" at the same time that the server has decided to close the "idle"
connection. From the server's point of view, the connection is being connection. From the server's point of view, the connection is being
closed while it was idle, but from the client's point of view, a closed while it was idle, but from the client's point of view, a
request is in progress. request is in progress.
This means that clients, servers, and proxies MUST be able to recover This means that clients, servers, and proxies MUST be able to recover
from asynchronous close events. Client software SHOULD reopen the from asynchronous close events. Client software SHOULD reopen the
transport connection and retransmit the aborted sequence of requests transport connection and retransmit the aborted sequence of requests
without user interaction so long as the request sequence is without user interaction so long as the request sequence is
idempotent (see section 9.1.2). Non-idempotent methods or sequences idempotent (see Section 9.1.2). Non-idempotent methods or sequences
MUST NOT be automatically retried, although user agents MAY offer a MUST NOT be automatically retried, although user agents MAY offer a
human operator the choice of retrying the request(s). Confirmation by human operator the choice of retrying the request(s). Confirmation
user-agent software with semantic understanding of the application by user-agent software with semantic understanding of the application
MAY substitute for user confirmation. The automatic retry SHOULD NOT MAY substitute for user confirmation. The automatic retry SHOULD NOT
be repeated if the second sequence of requests fails. be repeated if the second sequence of requests fails.
Servers SHOULD always respond to at least one request per connection, Servers SHOULD always respond to at least one request per connection,
if at all possible. Servers SHOULD NOT close a connection in the if at all possible. Servers SHOULD NOT close a connection in the
middle of transmitting a response, unless a network or client failure middle of transmitting a response, unless a network or client failure
is suspected. is suspected.
Clients that use persistent connections SHOULD limit the number of Clients that use persistent connections SHOULD limit the number of
simultaneous connections that they maintain to a given server. A simultaneous connections that they maintain to a given server. A
single-user client SHOULD NOT maintain more than 2 connections with single-user client SHOULD NOT maintain more than 2 connections with
any server or proxy. A proxy SHOULD use up to 2*N connections to any server or proxy. A proxy SHOULD use up to 2*N connections to
another server or proxy, where N is the number of simultaneously another server or proxy, where N is the number of simultaneously
active users. These guidelines are intended to improve HTTP response active users. These guidelines are intended to improve HTTP response
times and avoid congestion. times and avoid congestion.
8.2 Message Transmission Requirements 8.2. Message Transmission Requirements
8.2.1 Persistent Connections and Flow Control 8.2.1. Persistent Connections and Flow Control
HTTP/1.1 servers SHOULD maintain persistent connections and use TCP's HTTP/1.1 servers SHOULD maintain persistent connections and use TCP's
flow control mechanisms to resolve temporary overloads, rather than flow control mechanisms to resolve temporary overloads, rather than
terminating connections with the expectation that clients will retry. terminating connections with the expectation that clients will retry.
The latter technique can exacerbate network congestion. The latter technique can exacerbate network congestion.
8.2.2 Monitoring Connections for Error Status Messages 8.2.2. Monitoring Connections for Error Status Messages
An HTTP/1.1 (or later) client sending a message-body SHOULD monitor An HTTP/1.1 (or later) client sending a message-body SHOULD monitor
the network connection for an error status while it is transmitting the network connection for an error status while it is transmitting
the request. If the client sees an error status, it SHOULD the request. If the client sees an error status, it SHOULD
immediately cease transmitting the body. If the body is being sent immediately cease transmitting the body. If the body is being sent
using a "chunked" encoding (section 3.6), a zero length chunk and using a "chunked" encoding (Section 3.6), a zero length chunk and
empty trailer MAY be used to prematurely mark the end of the message. empty trailer MAY be used to prematurely mark the end of the message.
If the body was preceded by a Content-Length header, the client MUST If the body was preceded by a Content-Length header, the client MUST
close the connection. close the connection.
8.2.3 Use of the 100 (Continue) Status 8.2.3. Use of the 100 (Continue) Status
The purpose of the 100 (Continue) status (see section 10.1.1) is to The purpose of the 100 (Continue) status (see Section 10.1.1) is to
allow a client that is sending a request message with a request body allow a client that is sending a request message with a request body
to determine if the origin server is willing to accept the request to determine if the origin server is willing to accept the request
(based on the request headers) before the client sends the request (based on the request headers) before the client sends the request
body. In some cases, it might either be inappropriate or highly body. In some cases, it might either be inappropriate or highly
inefficient for the client to send the body if the server will reject inefficient for the client to send the body if the server will reject
the message without looking at the body. the message without looking at the body.
Requirements for HTTP/1.1 clients: Requirements for HTTP/1.1 clients:
- If a client will wait for a 100 (Continue) response before o If a client will wait for a 100 (Continue) response before sending
sending the request body, it MUST send an Expect request-header the request body, it MUST send an Expect request-header field
field (section 14.20) with the "100-continue" expectation. (Section 14.20) with the "100-continue" expectation.
- A client MUST NOT send an Expect request-header field (section o A client MUST NOT send an Expect request-header field
14.20) with the "100-continue" expectation if it does not intend (Section 14.20) with the "100-continue" expectation if it does not
to send a request body. intend to send a request body.
Because of the presence of older implementations, the protocol allows Because of the presence of older implementations, the protocol allows
ambiguous situations in which a client may send "Expect: 100- ambiguous situations in which a client may send "Expect: 100-
continue" without receiving either a 417 (Expectation Failed) status continue" without receiving either a 417 (Expectation Failed) status
or a 100 (Continue) status. Therefore, when a client sends this or a 100 (Continue) status. Therefore, when a client sends this
header field to an origin server (possibly via a proxy) from which it header field to an origin server (possibly via a proxy) from which it
has never seen a 100 (Continue) status, the client SHOULD NOT wait has never seen a 100 (Continue) status, the client SHOULD NOT wait
for an indefinite period before sending the request body. for an indefinite period before sending the request body.
Requirements for HTTP/1.1 origin servers: Requirements for HTTP/1.1 origin servers:
- Upon receiving a request which includes an Expect request-header o Upon receiving a request which includes an Expect request-header
field with the "100-continue" expectation, an origin server MUST field with the "100-continue" expectation, an origin server MUST
either respond with 100 (Continue) status and continue to read either respond with 100 (Continue) status and continue to read
from the input stream, or respond with a final status code. The from the input stream, or respond with a final status code. The
origin server MUST NOT wait for the request body before sending origin server MUST NOT wait for the request body before sending
the 100 (Continue) response. If it responds with a final status the 100 (Continue) response. If it responds with a final status
code, it MAY close the transport connection or it MAY continue code, it MAY close the transport connection or it MAY continue to
to read and discard the rest of the request. It MUST NOT read and discard the rest of the request. It MUST NOT perform the
perform the requested method if it returns a final status code. requested method if it returns a final status code.
- An origin server SHOULD NOT send a 100 (Continue) response if o An origin server SHOULD NOT send a 100 (Continue) response if the
the request message does not include an Expect request-header request message does not include an Expect request-header field
field with the "100-continue" expectation, and MUST NOT send a with the "100-continue" expectation, and MUST NOT send a 100
100 (Continue) response if such a request comes from an HTTP/1.0 (Continue) response if such a request comes from an HTTP/1.0 (or
(or earlier) client. There is an exception to this rule: for earlier) client. There is an exception to this rule: for
compatibility with RFC 2068, a server MAY send a 100 (Continue) compatibility with RFC 2068, a server MAY send a 100 (Continue)
status in response to an HTTP/1.1 PUT or POST request that does status in response to an HTTP/1.1 PUT or POST request that does
not include an Expect request-header field with the "100- not include an Expect request-header field with the "100-continue"
continue" expectation. This exception, the purpose of which is expectation. This exception, the purpose of which is to minimize
to minimize any client processing delays associated with an any client processing delays associated with an undeclared wait
undeclared wait for 100 (Continue) status, applies only to for 100 (Continue) status, applies only to HTTP/1.1 requests, and
HTTP/1.1 requests, and not to requests with any other HTTP- not to requests with any other HTTP-version value.
version value.
- An origin server MAY omit a 100 (Continue) response if it has o An origin server MAY omit a 100 (Continue) response if it has
already received some or all of the request body for the already received some or all of the request body for the
corresponding request. corresponding request.
- An origin server that sends a 100 (Continue) response MUST o An origin server that sends a 100 (Continue) response MUST
ultimately send a final status code, once the request body is ultimately send a final status code, once the request body is
received and processed, unless it terminates the transport received and processed, unless it terminates the transport
connection prematurely. connection prematurely.
- If an origin server receives a request that does not include an o If an origin server receives a request that does not include an
Expect request-header field with the "100-continue" expectation, Expect request-header field with the "100-continue" expectation,
the request includes a request body, and the server responds the request includes a request body, and the server responds with
with a final status code before reading the entire request body a final status code before reading the entire request body from
from the transport connection, then the server SHOULD NOT close the transport connection, then the server SHOULD NOT close the
the transport connection until it has read the entire request, transport connection until it has read the entire request, or
or until the client closes the connection. Otherwise, the client until the client closes the connection. Otherwise, the client
might not reliably receive the response message. However, this might not reliably receive the response message. However, this
requirement is not be construed as preventing a server from requirement is not be construed as preventing a server from
defending itself against denial-of-service attacks, or from defending itself against denial-of-service attacks, or from badly
badly broken client implementations. broken client implementations.
Requirements for HTTP/1.1 proxies: Requirements for HTTP/1.1 proxies:
- If a proxy receives a request that includes an Expect request- o If a proxy receives a request that includes an Expect request-
header field with the "100-continue" expectation, and the proxy header field with the "100-continue" expectation, and the proxy
either knows that the next-hop server complies with HTTP/1.1 or either knows that the next-hop server complies with HTTP/1.1 or
higher, or does not know the HTTP version of the next-hop higher, or does not know the HTTP version of the next-hop server,
server, it MUST forward the request, including the Expect header it MUST forward the request, including the Expect header field.
field.
- If the proxy knows that the version of the next-hop server is o If the proxy knows that the version of the next-hop server is
HTTP/1.0 or lower, it MUST NOT forward the request, and it MUST HTTP/1.0 or lower, it MUST NOT forward the request, and it MUST
respond with a 417 (Expectation Failed) status. respond with a 417 (Expectation Failed) status.
- Proxies SHOULD maintain a cache recording the HTTP version o Proxies SHOULD maintain a cache recording the HTTP version numbers
numbers received from recently-referenced next-hop servers. received from recently-referenced next-hop servers.
- A proxy MUST NOT forward a 100 (Continue) response if the o A proxy MUST NOT forward a 100 (Continue) response if the request
request message was received from an HTTP/1.0 (or earlier) message was received from an HTTP/1.0 (or earlier) client and did
client and did not include an Expect request-header field with not include an Expect request-header field with the "100-continue"
the "100-continue" expectation. This requirement overrides the expectation. This requirement overrides the general rule for
general rule for forwarding of 1xx responses (see section 10.1). forwarding of 1xx responses (see Section 10.1).
8.2.4 Client Behavior if Server Prematurely Closes Connection 8.2.4. Client Behavior if Server Prematurely Closes Connection
If an HTTP/1.1 client sends a request which includes a request body, If an HTTP/1.1 client sends a request which includes a request body,
but which does not include an Expect request-header field with the but which does not include an Expect request-header field with the
"100-continue" expectation, and if the client is not directly "100-continue" expectation, and if the client is not directly
connected to an HTTP/1.1 origin server, and if the client sees the connected to an HTTP/1.1 origin server, and if the client sees the
connection close before receiving any status from the server, the connection close before receiving any status from the server, the
client SHOULD retry the request. If the client does retry this client SHOULD retry the request. If the client does retry this
request, it MAY use the following "binary exponential backoff" request, it MAY use the following "binary exponential backoff"
algorithm to be assured of obtaining a reliable response: algorithm to be assured of obtaining a reliable response:
1. Initiate a new connection to the server 1. Initiate a new connection to the server
2. Transmit the request-headers 2. Transmit the request-headers
3. Initialize a variable R to the estimated round-trip time to the 3. Initialize a variable R to the estimated round-trip time to the
server (e.g., based on the time it took to establish the server (e.g., based on the time it took to establish the
connection), or to a constant value of 5 seconds if the round- connection), or to a constant value of 5 seconds if the round-
trip time is not available. trip time is not available.
4. Compute T = R * (2**N), where N is the number of previous 4. Compute T = R * (2**N), where N is the number of previous retries
retries of this request. of this request.
5. Wait either for an error response from the server, or for T 5. Wait either for an error response from the server, or for T
seconds (whichever comes first) seconds (whichever comes first)
6. If no error response is received, after T seconds transmit the 6. If no error response is received, after T seconds transmit the
body of the request. body of the request.
7. If client sees that the connection is closed prematurely, 7. If client sees that the connection is closed prematurely, repeat
repeat from step 1 until the request is accepted, an error from step 1 until the request is accepted, an error response is
response is received, or the user becomes impatient and received, or the user becomes impatient and terminates the retry
terminates the retry process. process.
If at any point an error status is received, the client If at any point an error status is received, the client
- SHOULD NOT continue and o SHOULD NOT continue and
- SHOULD close the connection if it has not completed sending the o SHOULD close the connection if it has not completed sending the
request message. request message.
9 Method Definitions 9. Method Definitions
The set of common methods for HTTP/1.1 is defined below. Although The set of common methods for HTTP/1.1 is defined below. Although
this set can be expanded, additional methods cannot be assumed to this set can be expanded, additional methods cannot be assumed to
share the same semantics for separately extended clients and servers. share the same semantics for separately extended clients and servers.
The Host request-header field (Section 14.23) MUST accompany all
The Host request-header field (section 14.23) MUST accompany all
HTTP/1.1 requests. HTTP/1.1 requests.
9.1 Safe and Idempotent Methods 9.1. Safe and Idempotent Methods
9.1.1 Safe Methods 9.1.1. Safe Methods
Implementors should be aware that the software represents the user in Implementors should be aware that the software represents the user in
their interactions over the Internet, and should be careful to allow their interactions over the Internet, and should be careful to allow
the user to be aware of any actions they might take which may have an the user to be aware of any actions they might take which may have an
unexpected significance to themselves or others. unexpected significance to themselves or others.
In particular, the convention has been established that the GET and In particular, the convention has been established that the GET and
HEAD methods SHOULD NOT have the significance of taking an action HEAD methods SHOULD NOT have the significance of taking an action
other than retrieval. These methods ought to be considered "safe". other than retrieval. These methods ought to be considered "safe".
This allows user agents to represent other methods, such as POST, PUT This allows user agents to represent other methods, such as POST, PUT
and DELETE, in a special way, so that the user is made aware of the and DELETE, in a special way, so that the user is made aware of the
fact that a possibly unsafe action is being requested. fact that a possibly unsafe action is being requested.
Naturally, it is not possible to ensure that the server does not Naturally, it is not possible to ensure that the server does not
generate side-effects as a result of performing a GET request; in generate side-effects as a result of performing a GET request; in
fact, some dynamic resources consider that a feature. The important fact, some dynamic resources consider that a feature. The important
distinction here is that the user did not request the side-effects, distinction here is that the user did not request the side-effects,
so therefore cannot be held accountable for them. so therefore cannot be held accountable for them.
9.1.2 Idempotent Methods 9.1.2. Idempotent Methods
Methods can also have the property of "idempotence" in that (aside Methods can also have the property of "idempotence" in that (aside
from error or expiration issues) the side-effects of N > 0 identical from error or expiration issues) the side-effects of N > 0 identical
requests is the same as for a single request. The methods GET, HEAD, requests is the same as for a single request. The methods GET, HEAD,
PUT and DELETE share this property. Also, the methods OPTIONS and PUT and DELETE share this property. Also, the methods OPTIONS and
TRACE SHOULD NOT have side effects, and so are inherently idempotent. TRACE SHOULD NOT have side effects, and so are inherently idempotent.
However, it is possible that a sequence of several requests is non- However, it is possible that a sequence of several requests is non-
idempotent, even if all of the methods executed in that sequence are idempotent, even if all of the methods executed in that sequence are
idempotent. (A sequence is idempotent if a single execution of the idempotent. (A sequence is idempotent if a single execution of the
entire sequence always yields a result that is not changed by a entire sequence always yields a result that is not changed by a
reexecution of all, or part, of that sequence.) For example, a reexecution of all, or part, of that sequence.) For example, a
sequence is non-idempotent if its result depends on a value that is sequence is non-idempotent if its result depends on a value that is
later modified in the same sequence. later modified in the same sequence.
A sequence that never has side effects is idempotent, by definition A sequence that never has side effects is idempotent, by definition
(provided that no concurrent operations are being executed on the (provided that no concurrent operations are being executed on the
same set of resources). same set of resources).
9.2 OPTIONS 9.2. OPTIONS
The OPTIONS method represents a request for information about the The OPTIONS method represents a request for information about the
communication options available on the request/response chain communication options available on the request/response chain
identified by the Request-URI. This method allows the client to identified by the Request-URI. This method allows the client to
determine the options and/or requirements associated with a resource, determine the options and/or requirements associated with a resource,
or the capabilities of a server, without implying a resource action or the capabilities of a server, without implying a resource action
or initiating a resource retrieval. or initiating a resource retrieval.
Responses to this method are not cacheable. Responses to this method are not cacheable.
skipping to change at page 52, line 41 skipping to change at page 55, line 43
specification does not define any use for such a body, future specification does not define any use for such a body, future
extensions to HTTP might use the OPTIONS body to make more detailed extensions to HTTP might use the OPTIONS body to make more detailed
queries on the server. A server that does not support such an queries on the server. A server that does not support such an
extension MAY discard the request body. extension MAY discard the request body.
If the Request-URI is an asterisk ("*"), the OPTIONS request is If the Request-URI is an asterisk ("*"), the OPTIONS request is
intended to apply to the server in general rather than to a specific intended to apply to the server in general rather than to a specific
resource. Since a server's communication options typically depend on resource. Since a server's communication options typically depend on
the resource, the "*" request is only useful as a "ping" or "no-op" the resource, the "*" request is only useful as a "ping" or "no-op"
type of method; it does nothing beyond allowing the client to test type of method; it does nothing beyond allowing the client to test
the capabilities of the server. For example, this can be used to test the capabilities of the server. For example, this can be used to
a proxy for HTTP/1.1 compliance (or lack thereof). test a proxy for HTTP/1.1 compliance (or lack thereof).
If the Request-URI is not an asterisk, the OPTIONS request applies If the Request-URI is not an asterisk, the OPTIONS request applies
only to the options that are available when communicating with that only to the options that are available when communicating with that
resource. resource.
A 200 response SHOULD include any header fields that indicate A 200 response SHOULD include any header fields that indicate
optional features implemented by the server and applicable to that optional features implemented by the server and applicable to that
resource (e.g., Allow), possibly including extensions not defined by resource (e.g., Allow), possibly including extensions not defined by
this specification. The response body, if any, SHOULD also include this specification. The response body, if any, SHOULD also include
information about the communication options. The format for such a information about the communication options. The format for such a
body is not defined by this specification, but might be defined by body is not defined by this specification, but might be defined by
future extensions to HTTP. Content negotiation MAY be used to select future extensions to HTTP. Content negotiation MAY be used to select
the appropriate response format. If no response body is included, the the appropriate response format. If no response body is included,
response MUST include a Content-Length field with a field-value of the response MUST include a Content-Length field with a field-value
"0". of "0".
The Max-Forwards request-header field MAY be used to target a The Max-Forwards request-header field MAY be used to target a
specific proxy in the request chain. When a proxy receives an OPTIONS specific proxy in the request chain. When a proxy receives an
request on an absoluteURI for which request forwarding is permitted, OPTIONS request on an absoluteURI for which request forwarding is
the proxy MUST check for a Max-Forwards field. If the Max-Forwards permitted, the proxy MUST check for a Max-Forwards field. If the
field-value is zero ("0"), the proxy MUST NOT forward the message; Max-Forwards field-value is zero ("0"), the proxy MUST NOT forward
instead, the proxy SHOULD respond with its own communication options. the message; instead, the proxy SHOULD respond with its own
If the Max-Forwards field-value is an integer greater than zero, the communication options. If the Max-Forwards field-value is an integer
proxy MUST decrement the field-value when it forwards the request. If greater than zero, the proxy MUST decrement the field-value when it
no Max-Forwards field is present in the request, then the forwarded forwards the request. If no Max-Forwards field is present in the
request MUST NOT include a Max-Forwards field. request, then the forwarded request MUST NOT include a Max-Forwards
field.
9.3 GET 9.3. GET
The GET method means retrieve whatever information (in the form of an The GET method means retrieve whatever information (in the form of an
entity) is identified by the Request-URI. If the Request-URI refers entity) is identified by the Request-URI. If the Request-URI refers
to a data-producing process, it is the produced data which shall be to a data-producing process, it is the produced data which shall be
returned as the entity in the response and not the source text of the returned as the entity in the response and not the source text of the
process, unless that text happens to be the output of the process. process, unless that text happens to be the output of the process.
The semantics of the GET method change to a "conditional GET" if the The semantics of the GET method change to a "conditional GET" if the
request message includes an If-Modified-Since, If-Unmodified-Since, request message includes an If-Modified-Since, If-Unmodified-Since,
If-Match, If-None-Match, or If-Range header field. A conditional GET If-Match, If-None-Match, or If-Range header field. A conditional GET
method requests that the entity be transferred only under the method requests that the entity be transferred only under the
circumstances described by the conditional header field(s). The circumstances described by the conditional header field(s). The
conditional GET method is intended to reduce unnecessary network conditional GET method is intended to reduce unnecessary network
usage by allowing cached entities to be refreshed without requiring usage by allowing cached entities to be refreshed without requiring
multiple requests or transferring data already held by the client. multiple requests or transferring data already held by the client.
The semantics of the GET method change to a "partial GET" if the The semantics of the GET method change to a "partial GET" if the
request message includes a Range header field. A partial GET requests request message includes a Range header field. A partial GET
that only part of the entity be transferred, as described in section requests that only part of the entity be transferred, as described in
14.35. The partial GET method is intended to reduce unnecessary Section 14.35. The partial GET method is intended to reduce
network usage by allowing partially-retrieved entities to be unnecessary network usage by allowing partially-retrieved entities to
completed without transferring data already held by the client. be completed without transferring data already held by the client.
The response to a GET request is cacheable if and only if it meets The response to a GET request is cacheable if and only if it meets
the requirements for HTTP caching described in section 13. the requirements for HTTP caching described in Section 13.
See section 15.1.3 for security considerations when used for forms. See Section 15.1.3 for security considerations when used for forms.
9.4 HEAD 9.4. HEAD
The HEAD method is identical to GET except that the server MUST NOT The HEAD method is identical to GET except that the server MUST NOT
return a message-body in the response. The metainformation contained return a message-body in the response. The metainformation contained
in the HTTP headers in response to a HEAD request SHOULD be identical in the HTTP headers in response to a HEAD request SHOULD be identical
to the information sent in response to a GET request. This method can to the information sent in response to a GET request. This method
be used for obtaining metainformation about the entity implied by the can be used for obtaining metainformation about the entity implied by
request without transferring the entity-body itself. This method is the request without transferring the entity-body itself. This method
often used for testing hypertext links for validity, accessibility, is often used for testing hypertext links for validity,
and recent modification. accessibility, and recent modification.
The response to a HEAD request MAY be cacheable in the sense that the The response to a HEAD request MAY be cacheable in the sense that the
information contained in the response MAY be used to update a information contained in the response MAY be used to update a
previously cached entity from that resource. If the new field values previously cached entity from that resource. If the new field values
indicate that the cached entity differs from the current entity (as indicate that the cached entity differs from the current entity (as
would be indicated by a change in Content-Length, Content-MD5, ETag would be indicated by a change in Content-Length, Content-MD5, ETag
or Last-Modified), then the cache MUST treat the cache entry as or Last-Modified), then the cache MUST treat the cache entry as
stale. stale.
9.5 POST 9.5. POST
The POST method is used to request that the origin server accept the The POST method is used to request that the origin server accept the
entity enclosed in the request as a new subordinate of the resource entity enclosed in the request as a new subordinate of the resource
identified by the Request-URI in the Request-Line. POST is designed identified by the Request-URI in the Request-Line. POST is designed
to allow a uniform method to cover the following functions: to allow a uniform method to cover the following functions:
- Annotation of existing resources; o Annotation of existing resources;
- Posting a message to a bulletin board, newsgroup, mailing list, o Posting a message to a bulletin board, newsgroup, mailing list, or
or similar group of articles; similar group of articles;
- Providing a block of data, such as the result of submitting a o Providing a block of data, such as the result of submitting a
form, to a data-handling process; form, to a data-handling process;
- Extending a database through an append operation. o Extending a database through an append operation.
The actual function performed by the POST method is determined by the The actual function performed by the POST method is determined by the
server and is usually dependent on the Request-URI. The posted entity server and is usually dependent on the Request-URI. The posted
is subordinate to that URI in the same way that a file is subordinate entity is subordinate to that URI in the same way that a file is
to a directory containing it, a news article is subordinate to a subordinate to a directory containing it, a news article is
newsgroup to which it is posted, or a record is subordinate to a subordinate to a newsgroup to which it is posted, or a record is
database. subordinate to a database.
The action performed by the POST method might not result in a The action performed by the POST method might not result in a
resource that can be identified by a URI. In this case, either 200 resource that can be identified by a URI. In this case, either 200
(OK) or 204 (No Content) is the appropriate response status, (OK) or 204 (No Content) is the appropriate response status,
depending on whether or not the response includes an entity that depending on whether or not the response includes an entity that
describes the result. describes the result.
If a resource has been created on the origin server, the response If a resource has been created on the origin server, the response
SHOULD be 201 (Created) and contain an entity which describes the SHOULD be 201 (Created) and contain an entity which describes the
status of the request and refers to the new resource, and a Location status of the request and refers to the new resource, and a Location
header (see section 14.30). header (see Section 14.30).
Responses to this method are not cacheable, unless the response Responses to this method are not cacheable, unless the response
includes appropriate Cache-Control or Expires header fields. However, includes appropriate Cache-Control or Expires header fields.
the 303 (See Other) response can be used to direct the user agent to However, the 303 (See Other) response can be used to direct the user
retrieve a cacheable resource. agent to retrieve a cacheable resource.
POST requests MUST obey the message transmission requirements set out POST requests MUST obey the message transmission requirements set out
in section 8.2. in Section 8.2.
See section 15.1.3 for security considerations. See Section 15.1.3 for security considerations.
9.6 PUT 9.6. PUT
The PUT method requests that the enclosed entity be stored under the The PUT method requests that the enclosed entity be stored under the
supplied Request-URI. If the Request-URI refers to an already supplied Request-URI. If the Request-URI refers to an already
existing resource, the enclosed entity SHOULD be considered as a existing resource, the enclosed entity SHOULD be considered as a
modified version of the one residing on the origin server. If the modified version of the one residing on the origin server. If the
Request-URI does not point to an existing resource, and that URI is Request-URI does not point to an existing resource, and that URI is
capable of being defined as a new resource by the requesting user capable of being defined as a new resource by the requesting user
agent, the origin server can create the resource with that URI. If a agent, the origin server can create the resource with that URI. If a
new resource is created, the origin server MUST inform the user agent new resource is created, the origin server MUST inform the user agent
via the 201 (Created) response. If an existing resource is modified, via the 201 (Created) response. If an existing resource is modified,
either the 200 (OK) or 204 (No Content) response codes SHOULD be sent either the 200 (OK) or 204 (No Content) response codes SHOULD be sent
to indicate successful completion of the request. If the resource to indicate successful completion of the request. If the resource
could not be created or modified with the Request-URI, an appropriate could not be created or modified with the Request-URI, an appropriate
error response SHOULD be given that reflects the nature of the error response SHOULD be given that reflects the nature of the
problem. The recipient of the entity MUST NOT ignore any Content-* problem. The recipient of the entity MUST NOT ignore any Content-*
(e.g. Content-Range) headers that it does not understand or implement (e.g. Content-Range) headers that it does not understand or
and MUST return a 501 (Not Implemented) response in such cases. implement and MUST return a 501 (Not Implemented) response in such
cases.
If the request passes through a cache and the Request-URI identifies If the request passes through a cache and the Request-URI identifies
one or more currently cached entities, those entries SHOULD be one or more currently cached entities, those entries SHOULD be
treated as stale. Responses to this method are not cacheable. treated as stale. Responses to this method are not cacheable.
The fundamental difference between the POST and PUT requests is The fundamental difference between the POST and PUT requests is
reflected in the different meaning of the Request-URI. The URI in a reflected in the different meaning of the Request-URI. The URI in a
POST request identifies the resource that will handle the enclosed POST request identifies the resource that will handle the enclosed
entity. That resource might be a data-accepting process, a gateway to entity. That resource might be a data-accepting process, a gateway
some other protocol, or a separate entity that accepts annotations. to some other protocol, or a separate entity that accepts
In contrast, the URI in a PUT request identifies the entity enclosed annotations. In contrast, the URI in a PUT request identifies the
with the request -- the user agent knows what URI is intended and the entity enclosed with the request -- the user agent knows what URI is
server MUST NOT attempt to apply the request to some other resource. intended and the server MUST NOT attempt to apply the request to some
If the server desires that the request be applied to a different URI, other resource. If the server desires that the request be applied to
it MUST send a 301 (Moved Permanently) response; the user agent MAY a different URI, it MUST send a 301 (Moved Permanently) response; the
then make its own decision regarding whether or not to redirect the user agent MAY then make its own decision regarding whether or not to
request. redirect the request.
A single resource MAY be identified by many different URIs. For A single resource MAY be identified by many different URIs. For
example, an article might have a URI for identifying "the current example, an article might have a URI for identifying "the current
version" which is separate from the URI identifying each particular version" which is separate from the URI identifying each particular
version. In this case, a PUT request on a general URI might result in version. In this case, a PUT request on a general URI might result
several other URIs being defined by the origin server. in several other URIs being defined by the origin server.
HTTP/1.1 does not define how a PUT method affects the state of an HTTP/1.1 does not define how a PUT method affects the state of an
origin server. origin server.
PUT requests MUST obey the message transmission requirements set out PUT requests MUST obey the message transmission requirements set out
in section 8.2. in Section 8.2.
Unless otherwise specified for a particular entity-header, the Unless otherwise specified for a particular entity-header, the
entity-headers in the PUT request SHOULD be applied to the resource entity-headers in the PUT request SHOULD be applied to the resource
created or modified by the PUT. created or modified by the PUT.
9.7 DELETE 9.7. DELETE
The DELETE method requests that the origin server delete the resource The DELETE method requests that the origin server delete the resource
identified by the Request-URI. This method MAY be overridden by human identified by the Request-URI. This method MAY be overridden by
intervention (or other means) on the origin server. The client cannot human intervention (or other means) on the origin server. The client
be guaranteed that the operation has been carried out, even if the cannot be guaranteed that the operation has been carried out, even if
status code returned from the origin server indicates that the action the status code returned from the origin server indicates that the
has been completed successfully. However, the server SHOULD NOT action has been completed successfully. However, the server SHOULD
indicate success unless, at the time the response is given, it NOT indicate success unless, at the time the response is given, it
intends to delete the resource or move it to an inaccessible intends to delete the resource or move it to an inaccessible
location. location.
A successful response SHOULD be 200 (OK) if the response includes an A successful response SHOULD be 200 (OK) if the response includes an
entity describing the status, 202 (Accepted) if the action has not entity describing the status, 202 (Accepted) if the action has not
yet been enacted, or 204 (No Content) if the action has been enacted yet been enacted, or 204 (No Content) if the action has been enacted
but the response does not include an entity. but the response does not include an entity.
If the request passes through a cache and the Request-URI identifies If the request passes through a cache and the Request-URI identifies
one or more currently cached entities, those entries SHOULD be one or more currently cached entities, those entries SHOULD be
treated as stale. Responses to this method are not cacheable. treated as stale. Responses to this method are not cacheable.
9.8 TRACE 9.8. TRACE
The TRACE method is used to invoke a remote, application-layer loop- The TRACE method is used to invoke a remote, application-layer loop-
back of the request message. The final recipient of the request back of the request message. The final recipient of the request
SHOULD reflect the message received back to the client as the SHOULD reflect the message received back to the client as the entity-
entity-body of a 200 (OK) response. The final recipient is either the body of a 200 (OK) response. The final recipient is either the
origin server or the first proxy or gateway to receive a Max-Forwards origin server or the first proxy or gateway to receive a Max-Forwards
value of zero (0) in the request (see section 14.31). A TRACE request value of zero (0) in the request (see Section 14.31). A TRACE
MUST NOT include an entity. request MUST NOT include an entity.
TRACE allows the client to see what is being received at the other TRACE allows the client to see what is being received at the other
end of the request chain and use that data for testing or diagnostic end of the request chain and use that data for testing or diagnostic
information. The value of the Via header field (section 14.45) is of information. The value of the Via header field (Section 14.45) is of
particular interest, since it acts as a trace of the request chain. particular interest, since it acts as a trace of the request chain.
Use of the Max-Forwards header field allows the client to limit the Use of the Max-Forwards header field allows the client to limit the
length of the request chain, which is useful for testing a chain of length of the request chain, which is useful for testing a chain of
proxies forwarding messages in an infinite loop. proxies forwarding messages in an infinite loop.
If the request is valid, the response SHOULD contain the entire If the request is valid, the response SHOULD contain the entire
request message in the entity-body, with a Content-Type of request message in the entity-body, with a Content-Type of "message/
"message/http". Responses to this method MUST NOT be cached. http". Responses to this method MUST NOT be cached.
9.9 CONNECT 9.9. CONNECT
This specification reserves the method name CONNECT for use with a This specification reserves the method name CONNECT for use with a
proxy that can dynamically switch to being a tunnel (e.g. SSL proxy that can dynamically switch to being a tunnel (e.g. SSL
tunneling [44]). tunneling [Luo1998]).
10 Status Code Definitions 10. Status Code Definitions
Each Status-Code is described below, including a description of which Each Status-Code is described below, including a description of which
method(s) it can follow and any metainformation required in the method(s) it can follow and any metainformation required in the
response. response.
10.1 Informational 1xx 10.1. Informational 1xx
This class of status code indicates a provisional response, This class of status code indicates a provisional response,
consisting only of the Status-Line and optional headers, and is consisting only of the Status-Line and optional headers, and is
terminated by an empty line. There are no required headers for this terminated by an empty line. There are no required headers for this
class of status code. Since HTTP/1.0 did not define any 1xx status class of status code. Since HTTP/1.0 did not define any 1xx status
codes, servers MUST NOT send a 1xx response to an HTTP/1.0 client codes, servers MUST NOT send a 1xx response to an HTTP/1.0 client
except under experimental conditions. except under experimental conditions.
A client MUST be prepared to accept one or more 1xx status responses A client MUST be prepared to accept one or more 1xx status responses
prior to a regular response, even if the client does not expect a 100 prior to a regular response, even if the client does not expect a 100
(Continue) status message. Unexpected 1xx status responses MAY be (Continue) status message. Unexpected 1xx status responses MAY be
ignored by a user agent. ignored by a user agent.
Proxies MUST forward 1xx responses, unless the connection between the Proxies MUST forward 1xx responses, unless the connection between the
proxy and its client has been closed, or unless the proxy itself proxy and its client has been closed, or unless the proxy itself
requested the generation of the 1xx response. (For example, if a requested the generation of the 1xx response. (For example, if a
proxy adds a "Expect: 100-continue" field when it forwards a request, proxy adds a "Expect: 100-continue" field when it forwards a request,
then it need not forward the corresponding 100 (Continue) then it need not forward the corresponding 100 (Continue)
response(s).) response(s).)
10.1.1 100 Continue 10.1.1. 100 Continue
The client SHOULD continue with its request. This interim response is The client SHOULD continue with its request. This interim response
used to inform the client that the initial part of the request has is used to inform the client that the initial part of the request has
been received and has not yet been rejected by the server. The client been received and has not yet been rejected by the server. The
SHOULD continue by sending the remainder of the request or, if the client SHOULD continue by sending the remainder of the request or, if
request has already been completed, ignore this response. The server the request has already been completed, ignore this response. The
MUST send a final response after the request has been completed. See server MUST send a final response after the request has been
section 8.2.3 for detailed discussion of the use and handling of this completed. See Section 8.2.3 for detailed discussion of the use and
status code. handling of this status code.
10.1.2 101 Switching Protocols 10.1.2. 101 Switching Protocols
The server understands and is willing to comply with the client's The server understands and is willing to comply with the client's
request, via the Upgrade message header field (section 14.42), for a request, via the Upgrade message header field (Section 14.42), for a
change in the application protocol being used on this connection. The change in the application protocol being used on this connection.
server will switch protocols to those defined by the response's The server will switch protocols to those defined by the response's
Upgrade header field immediately after the empty line which Upgrade header field immediately after the empty line which
terminates the 101 response. terminates the 101 response.
The protocol SHOULD be switched only when it is advantageous to do The protocol SHOULD be switched only when it is advantageous to do
so. For example, switching to a newer version of HTTP is advantageous so. For example, switching to a newer version of HTTP is
over older versions, and switching to a real-time, synchronous advantageous over older versions, and switching to a real-time,
protocol might be advantageous when delivering resources that use synchronous protocol might be advantageous when delivering resources
such features. that use such features.
10.2 Successful 2xx 10.2. Successful 2xx
This class of status code indicates that the client's request was This class of status code indicates that the client's request was
successfully received, understood, and accepted. successfully received, understood, and accepted.
10.2.1 200 OK 10.2.1. 200 OK
The request has succeeded. The information returned with the response The request has succeeded. The information returned with the
is dependent on the method used in the request, for example: response is dependent on the method used in the request, for example:
GET an entity corresponding to the requested resource is sent in GET an entity corresponding to the requested resource is sent in the
the response; response;
HEAD the entity-header fields corresponding to the requested HEAD the entity-header fields corresponding to the requested
resource are sent in the response without any message-body; resource are sent in the response without any message-body;
POST an entity describing or containing the result of the action; POST an entity describing or containing the result of the action;
TRACE an entity containing the request message as received by the TRACE an entity containing the request message as received by the
end server. end server.
10.2.2 201 Created 10.2.2. 201 Created
The request has been fulfilled and resulted in a new resource being The request has been fulfilled and resulted in a new resource being
created. The newly created resource can be referenced by the URI(s) created. The newly created resource can be referenced by the URI(s)
returned in the entity of the response, with the most specific URI returned in the entity of the response, with the most specific URI
for the resource given by a Location header field. The response for the resource given by a Location header field. The response
SHOULD include an entity containing a list of resource SHOULD include an entity containing a list of resource
characteristics and location(s) from which the user or user agent can characteristics and location(s) from which the user or user agent can
choose the one most appropriate. The entity format is specified by choose the one most appropriate. The entity format is specified by
the media type given in the Content-Type header field. The origin the media type given in the Content-Type header field. The origin
server MUST create the resource before returning the 201 status code. server MUST create the resource before returning the 201 status code.
If the action cannot be carried out immediately, the server SHOULD If the action cannot be carried out immediately, the server SHOULD
respond with 202 (Accepted) response instead. respond with 202 (Accepted) response instead.
A 201 response MAY contain an ETag response header field indicating A 201 response MAY contain an ETag response header field indicating
the current value of the entity tag for the requested variant just the current value of the entity tag for the requested variant just
created, see section 14.19. created, see Section 14.19.
10.2.3 202 Accepted 10.2.3. 202 Accepted
The request has been accepted for processing, but the processing has The request has been accepted for processing, but the processing has
not been completed. The request might or might not eventually be not been completed. The request might or might not eventually be
acted upon, as it might be disallowed when processing actually takes acted upon, as it might be disallowed when processing actually takes
place. There is no facility for re-sending a status code from an place. There is no facility for re-sending a status code from an
asynchronous operation such as this. asynchronous operation such as this.
The 202 response is intentionally non-committal. Its purpose is to The 202 response is intentionally non-committal. Its purpose is to
allow a server to accept a request for some other process (perhaps a allow a server to accept a request for some other process (perhaps a
batch-oriented process that is only run once per day) without batch-oriented process that is only run once per day) without
requiring that the user agent's connection to the server persist requiring that the user agent's connection to the server persist
until the process is completed. The entity returned with this until the process is completed. The entity returned with this
response SHOULD include an indication of the request's current status response SHOULD include an indication of the request's current status
and either a pointer to a status monitor or some estimate of when the and either a pointer to a status monitor or some estimate of when the
user can expect the request to be fulfilled. user can expect the request to be fulfilled.
10.2.4 203 Non-Authoritative Information 10.2.4. 203 Non-Authoritative Information
The returned metainformation in the entity-header is not the The returned metainformation in the entity-header is not the
definitive set as available from the origin server, but is gathered definitive set as available from the origin server, but is gathered
from a local or a third-party copy. The set presented MAY be a subset from a local or a third-party copy. The set presented MAY be a
or superset of the original version. For example, including local subset or superset of the original version. For example, including
annotation information about the resource might result in a superset local annotation information about the resource might result in a
of the metainformation known by the origin server. Use of this superset of the metainformation known by the origin server. Use of
response code is not required and is only appropriate when the this response code is not required and is only appropriate when the
response would otherwise be 200 (OK). response would otherwise be 200 (OK).
10.2.5 204 No Content 10.2.5. 204 No Content
The server has fulfilled the request but does not need to return an The server has fulfilled the request but does not need to return an
entity-body, and might want to return updated metainformation. The entity-body, and might want to return updated metainformation. The
response MAY include new or updated metainformation in the form of response MAY include new or updated metainformation in the form of
entity-headers, which if present SHOULD be associated with the entity-headers, which if present SHOULD be associated with the
requested variant. requested variant.
If the client is a user agent, it SHOULD NOT change its document view If the client is a user agent, it SHOULD NOT change its document view
from that which caused the request to be sent. This response is from that which caused the request to be sent. This response is
primarily intended to allow input for actions to take place without primarily intended to allow input for actions to take place without
causing a change to the user agent's active document view, although causing a change to the user agent's active document view, although
any new or updated metainformation SHOULD be applied to the document any new or updated metainformation SHOULD be applied to the document
currently in the user agent's active view. currently in the user agent's active view.
The 204 response MUST NOT include a message-body, and thus is always The 204 response MUST NOT include a message-body, and thus is always
terminated by the first empty line after the header fields. terminated by the first empty line after the header fields.
10.2.6 205 Reset Content 10.2.6. 205 Reset Content
The server has fulfilled the request and the user agent SHOULD reset The server has fulfilled the request and the user agent SHOULD reset
the document view which caused the request to be sent. This response the document view which caused the request to be sent. This response
is primarily intended to allow input for actions to take place via is primarily intended to allow input for actions to take place via
user input, followed by a clearing of the form in which the input is user input, followed by a clearing of the form in which the input is
given so that the user can easily initiate another input action. The given so that the user can easily initiate another input action. The
response MUST NOT include an entity. response MUST NOT include an entity.
10.2.7 206 Partial Content 10.2.7. 206 Partial Content
The server has fulfilled the partial GET request for the resource. The server has fulfilled the partial GET request for the resource.
The request MUST have included a Range header field (section 14.35) The request MUST have included a Range header field (Section 14.35)
indicating the desired range, and MAY have included an If-Range indicating the desired range, and MAY have included an If-Range
header field (section 14.27) to make the request conditional. header field (Section 14.27) to make the request conditional.
The response MUST include the following header fields: The response MUST include the following header fields:
- Either a Content-Range header field (section 14.16) indicating o Either a Content-Range header field (Section 14.16) indicating the
the range included with this response, or a multipart/byteranges range included with this response, or a multipart/byteranges
Content-Type including Content-Range fields for each part. If a Content-Type including Content-Range fields for each part. If a
Content-Length header field is present in the response, its Content-Length header field is present in the response, its value
value MUST match the actual number of OCTETs transmitted in the MUST match the actual number of OCTETs transmitted in the message-
message-body. body.
- Date
- ETag and/or Content-Location, if the header would have been sent o Date
o ETag and/or Content-Location, if the header would have been sent
in a 200 response to the same request in a 200 response to the same request
- Expires, Cache-Control, and/or Vary, if the field-value might
o Expires, Cache-Control, and/or Vary, if the field-value might
differ from that sent in any previous response for the same differ from that sent in any previous response for the same
variant variant
If the 206 response is the result of an If-Range request that used a If the 206 response is the result of an If-Range request that used a
strong cache validator (see section 13.3.3), the response SHOULD NOT strong cache validator (see Section 13.3.3), the response SHOULD NOT
include other entity-headers. If the response is the result of an include other entity-headers. If the response is the result of an
If-Range request that used a weak validator, the response MUST NOT If-Range request that used a weak validator, the response MUST NOT
include other entity-headers; this prevents inconsistencies between include other entity-headers; this prevents inconsistencies between
cached entity-bodies and updated headers. Otherwise, the response cached entity-bodies and updated headers. Otherwise, the response
MUST include all of the entity-headers that would have been returned MUST include all of the entity-headers that would have been returned
with a 200 (OK) response to the same request. with a 200 (OK) response to the same request.
A cache MUST NOT combine a 206 response with other previously cached A cache MUST NOT combine a 206 response with other previously cached
content if the ETag or Last-Modified headers do not match exactly, content if the ETag or Last-Modified headers do not match exactly,
see 13.5.4. see 13.5.4.
A cache that does not support the Range and Content-Range headers A cache that does not support the Range and Content-Range headers
MUST NOT cache 206 (Partial) responses. MUST NOT cache 206 (Partial) responses.
10.3 Redirection 3xx 10.3. Redirection 3xx
This class of status code indicates that further action needs to be This class of status code indicates that further action needs to be
taken by the user agent in order to fulfill the request. The action taken by the user agent in order to fulfill the request. The action
required MAY be carried out by the user agent without interaction required MAY be carried out by the user agent without interaction
with the user if and only if the method used in the second request is with the user if and only if the method used in the second request is
GET or HEAD. A client SHOULD detect infinite redirection loops, since GET or HEAD. A client SHOULD detect infinite redirection loops,
such loops generate network traffic for each redirection. since such loops generate network traffic for each redirection.
Note: previous versions of this specification recommended a Note: previous versions of this specification recommended a
maximum of five redirections. Content developers should be aware maximum of five redirections. Content developers should be aware
that there might be clients that implement such a fixed that there might be clients that implement such a fixed
limitation. limitation.
10.3.1 300 Multiple Choices 10.3.1. 300 Multiple Choices
The requested resource corresponds to any one of a set of The requested resource corresponds to any one of a set of
representations, each with its own specific location, and agent- representations, each with its own specific location, and agent-
driven negotiation information (section 12) is being provided so that driven negotiation information (Section 12) is being provided so that
the user (or user agent) can select a preferred representation and the user (or user agent) can select a preferred representation and
redirect its request to that location. redirect its request to that location.
Unless it was a HEAD request, the response SHOULD include an entity Unless it was a HEAD request, the response SHOULD include an entity
containing a list of resource characteristics and location(s) from containing a list of resource characteristics and location(s) from
which the user or user agent can choose the one most appropriate. The which the user or user agent can choose the one most appropriate.
entity format is specified by the media type given in the Content-
Type header field. Depending upon the format and the capabilities of The entity format is specified by the media type given in the
the user agent, selection of the most appropriate choice MAY be Content-Type header field. Depending upon the format and the
performed automatically. However, this specification does not define capabilities of the user agent, selection of the most appropriate
any standard for such automatic selection. choice MAY be performed automatically. However, this specification
does not define any standard for such automatic selection.
If the server has a preferred choice of representation, it SHOULD If the server has a preferred choice of representation, it SHOULD
include the specific URI for that representation in the Location include the specific URI for that representation in the Location
field; user agents MAY use the Location field value for automatic field; user agents MAY use the Location field value for automatic
redirection. This response is cacheable unless indicated otherwise. redirection. This response is cacheable unless indicated otherwise.
10.3.2 301 Moved Permanently 10.3.2. 301 Moved Permanently
The requested resource has been assigned a new permanent URI and any The requested resource has been assigned a new permanent URI and any
future references to this resource SHOULD use one of the returned future references to this resource SHOULD use one of the returned
URIs. Clients with link editing capabilities ought to automatically URIs. Clients with link editing capabilities ought to automatically
re-link references to the Request-URI to one or more of the new re-link references to the Request-URI to one or more of the new
references returned by the server, where possible. This response is references returned by the server, where possible. This response is
cacheable unless indicated otherwise. cacheable unless indicated otherwise.
The new permanent URI SHOULD be given by the Location field in the The new permanent URI SHOULD be given by the Location field in the
response. Unless the request method was HEAD, the entity of the response. Unless the request method was HEAD, the entity of the
skipping to change at page 62, line 36 skipping to change at page 65, line 39
If the 301 status code is received in response to a request other If the 301 status code is received in response to a request other
than GET or HEAD, the user agent MUST NOT automatically redirect the than GET or HEAD, the user agent MUST NOT automatically redirect the
request unless it can be confirmed by the user, since this might request unless it can be confirmed by the user, since this might
change the conditions under which the request was issued. change the conditions under which the request was issued.
Note: When automatically redirecting a POST request after Note: When automatically redirecting a POST request after
receiving a 301 status code, some existing HTTP/1.0 user agents receiving a 301 status code, some existing HTTP/1.0 user agents
will erroneously change it into a GET request. will erroneously change it into a GET request.
10.3.3 302 Found 10.3.3. 302 Found
The requested resource resides temporarily under a different URI. The requested resource resides temporarily under a different URI.
Since the redirection might be altered on occasion, the client SHOULD Since the redirection might be altered on occasion, the client SHOULD
continue to use the Request-URI for future requests. This response continue to use the Request-URI for future requests. This response
is only cacheable if indicated by a Cache-Control or Expires header is only cacheable if indicated by a Cache-Control or Expires header
field. field.
The temporary URI SHOULD be given by the Location field in the The temporary URI SHOULD be given by the Location field in the
response. Unless the request method was HEAD, the entity of the response. Unless the request method was HEAD, the entity of the
response SHOULD contain a short hypertext note with a hyperlink to response SHOULD contain a short hypertext note with a hyperlink to
skipping to change at page 63, line 18 skipping to change at page 66, line 16
change the conditions under which the request was issued. change the conditions under which the request was issued.
Note: RFC 1945 and RFC 2068 specify that the client is not allowed Note: RFC 1945 and RFC 2068 specify that the client is not allowed
to change the method on the redirected request. However, most to change the method on the redirected request. However, most
existing user agent implementations treat 302 as if it were a 303 existing user agent implementations treat 302 as if it were a 303
response, performing a GET on the Location field-value regardless response, performing a GET on the Location field-value regardless
of the original request method. The status codes 303 and 307 have of the original request method. The status codes 303 and 307 have
been added for servers that wish to make unambiguously clear which been added for servers that wish to make unambiguously clear which
kind of reaction is expected of the client. kind of reaction is expected of the client.
10.3.4 303 See Other 10.3.4. 303 See Other
The response to the request can be found under a different URI and The response to the request can be found under a different URI and
SHOULD be retrieved using a GET method on that resource. This method SHOULD be retrieved using a GET method on that resource. This method
exists primarily to allow the output of a POST-activated script to exists primarily to allow the output of a POST-activated script to
redirect the user agent to a selected resource. The new URI is not a redirect the user agent to a selected resource. The new URI is not a
substitute reference for the originally requested resource. The 303 substitute reference for the originally requested resource. The 303
response MUST NOT be cached, but the response to the second response MUST NOT be cached, but the response to the second
(redirected) request might be cacheable. (redirected) request might be cacheable.
The different URI SHOULD be given by the Location field in the The different URI SHOULD be given by the Location field in the
response. Unless the request method was HEAD, the entity of the response. Unless the request method was HEAD, the entity of the
response SHOULD contain a short hypertext note with a hyperlink to response SHOULD contain a short hypertext note with a hyperlink to
the new URI(s). the new URI(s).
Note: Many pre-HTTP/1.1 user agents do not understand the 303 Note: Many pre-HTTP/1.1 user agents do not understand the 303
status. When interoperability with such clients is a concern, the status. When interoperability with such clients is a concern, the
302 status code may be used instead, since most user agents react 302 status code may be used instead, since most user agents react
to a 302 response as described here for 303. to a 302 response as described here for 303.
10.3.5 304 Not Modified 10.3.5. 304 Not Modified
If the client has performed a conditional GET request and access is If the client has performed a conditional GET request and access is
allowed, but the document has not been modified, the server SHOULD allowed, but the document has not been modified, the server SHOULD
respond with this status code. The 304 response MUST NOT contain a respond with this status code. The 304 response MUST NOT contain a
message-body, and thus is always terminated by the first empty line message-body, and thus is always terminated by the first empty line
after the header fields. after the header fields.
The response MUST include the following header fields: The response MUST include the following header fields:
- Date, unless its omission is required by section 14.18.1 o Date, unless its omission is required by Section 14.18.1
If a clockless origin server obeys these rules, and proxies and If a clockless origin server obeys these rules, and proxies and
clients add their own Date to any response received without one (as clients add their own Date to any response received without one (as
already specified by [RFC 2068], section 14.19), caches will operate already specified by [RFC 2068], section 14.19), caches will operate
correctly. correctly.
- ETag and/or Content-Location, if the header would have been sent o ETag and/or Content-Location, if the header would have been sent
in a 200 response to the same request in a 200 response to the same request
- Expires, Cache-Control, and/or Vary, if the field-value might o Expires, Cache-Control, and/or Vary, if the field-value might
differ from that sent in any previous response for the same differ from that sent in any previous response for the same
variant variant
If the conditional GET used a strong cache validator (see section If the conditional GET used a strong cache validator (see
13.3.3), the response SHOULD NOT include other entity-headers. Section 13.3.3), the response SHOULD NOT include other entity-
Otherwise (i.e., the conditional GET used a weak validator), the headers. Otherwise (i.e., the conditional GET used a weak
response MUST NOT include other entity-headers; this prevents validator), the response MUST NOT include other entity-headers; this
inconsistencies between cached entity-bodies and updated headers. prevents inconsistencies between cached entity-bodies and updated
headers.
If a 304 response indicates an entity not currently cached, then the If a 304 response indicates an entity not currently cached, then the
cache MUST disregard the response and repeat the request without the cache MUST disregard the response and repeat the request without the
conditional. conditional.
If a cache uses a received 304 response to update a cache entry, the If a cache uses a received 304 response to update a cache entry, the
cache MUST update the entry to reflect any new field values given in cache MUST update the entry to reflect any new field values given in
the response. the response.
10.3.6 305 Use Proxy 10.3.6. 305 Use Proxy
The requested resource MUST be accessed through the proxy given by The requested resource MUST be accessed through the proxy given by
the Location field. The Location field gives the URI of the proxy. the Location field. The Location field gives the URI of the proxy.
The recipient is expected to repeat this single request via the The recipient is expected to repeat this single request via the
proxy. 305 responses MUST only be generated by origin servers. proxy. 305 responses MUST only be generated by origin servers.
Note: RFC 2068 was not clear that 305 was intended to redirect a Note: RFC 2068 was not clear that 305 was intended to redirect a
single request, and to be generated by origin servers only. Not single request, and to be generated by origin servers only. Not
observing these limitations has significant security consequences. observing these limitations has significant security consequences.
10.3.7 306 (Unused) 10.3.7. 306 (Unused)
The 306 status code was used in a previous version of the The 306 status code was used in a previous version of the
specification, is no longer used, and the code is reserved. specification, is no longer used, and the code is reserved.
10.3.8 307 Temporary Redirect 10.3.8. 307 Temporary Redirect
The requested resource resides temporarily under a different URI. The requested resource resides temporarily under a different URI.
Since the redirection MAY be altered on occasion, the client SHOULD Since the redirection MAY be altered on occasion, the client SHOULD
continue to use the Request-URI for future requests. This response continue to use the Request-URI for future requests. This response
is only cacheable if indicated by a Cache-Control or Expires header is only cacheable if indicated by a Cache-Control or Expires header
field. field.
The temporary URI SHOULD be given by the Location field in the The temporary URI SHOULD be given by the Location field in the
response. Unless the request method was HEAD, the entity of the response. Unless the request method was HEAD, the entity of the
response SHOULD contain a short hypertext note with a hyperlink to response SHOULD contain a short hypertext note with a hyperlink to
the new URI(s) , since many pre-HTTP/1.1 user agents do not the new URI(s) , since many pre-HTTP/1.1 user agents do not
understand the 307 status. Therefore, the note SHOULD contain the understand the 307 status. Therefore, the note SHOULD contain the
information necessary for a user to repeat the original request on information necessary for a user to repeat the original request on
the new URI. the new URI.
If the 307 status code is received in response to a request other If the 307 status code is received in response to a request other
than GET or HEAD, the user agent MUST NOT automatically redirect the than GET or HEAD, the user agent MUST NOT automatically redirect the
request unless it can be confirmed by the user, since this might request unless it can be confirmed by the user, since this might
change the conditions under which the request was issued. change the conditions under which the request was issued.
10.4 Client Error 4xx 10.4. Client Error 4xx
The 4xx class of status code is intended for cases in which the The 4xx class of status code is intended for cases in which the
client seems to have erred. Except when responding to a HEAD request, client seems to have erred. Except when responding to a HEAD
the server SHOULD include an entity containing an explanation of the request, the server SHOULD include an entity containing an
error situation, and whether it is a temporary or permanent explanation of the error situation, and whether it is a temporary or
condition. These status codes are applicable to any request method. permanent condition. These status codes are applicable to any
User agents SHOULD display any included entity to the user. request method. User agents SHOULD display any included entity to
the user.
If the client is sending data, a server implementation using TCP If the client is sending data, a server implementation using TCP
SHOULD be careful to ensure that the client acknowledges receipt of SHOULD be careful to ensure that the client acknowledges receipt of
the packet(s) containing the response, before the server closes the the packet(s) containing the response, before the server closes the
input connection. If the client continues sending data to the server input connection. If the client continues sending data to the server
after the close, the server's TCP stack will send a reset packet to after the close, the server's TCP stack will send a reset packet to
the client, which may erase the client's unacknowledged input buffers the client, which may erase the client's unacknowledged input buffers
before they can be read and interpreted by the HTTP application. before they can be read and interpreted by the HTTP application.
10.4.1 400 Bad Request 10.4.1. 400 Bad Request
The request could not be understood by the server due to malformed The request could not be understood by the server due to malformed
syntax. The client SHOULD NOT repeat the request without syntax. The client SHOULD NOT repeat the request without
modifications. modifications.
10.4.2 401 Unauthorized 10.4.2. 401 Unauthorized
The request requires user authentication. The response MUST include a The request requires user authentication. The response MUST include
WWW-Authenticate header field (section 14.47) containing a challenge a WWW-Authenticate header field (Section 14.47) containing a
applicable to the requested resource. The client MAY repeat the challenge applicable to the requested resource. The client MAY
request with a suitable Authorization header field (section 14.8). If repeat the request with a suitable Authorization header field
the request already included Authorization credentials, then the 401 (Section 14.8). If the request already included Authorization
response indicates that authorization has been refused for those credentials, then the 401 response indicates that authorization has
credentials. If the 401 response contains the same challenge as the been refused for those credentials. If the 401 response contains the
prior response, and the user agent has already attempted same challenge as the prior response, and the user agent has already
authentication at least once, then the user SHOULD be presented the attempted authentication at least once, then the user SHOULD be
entity that was given in the response, since that entity might presented the entity that was given in the response, since that
include relevant diagnostic information. HTTP access authentication entity might include relevant diagnostic information. HTTP access
is explained in "HTTP Authentication: Basic and Digest Access authentication is explained in "HTTP Authentication: Basic and Digest
Authentication" [43]. Access Authentication" [RFC2617].
10.4.3 402 Payment Required 10.4.3. 402 Payment Required
This code is reserved for future use. This code is reserved for future use.
10.4.4 403 Forbidden 10.4.4. 403 Forbidden
The server understood the request, but is refusing to fulfill it. The server understood the request, but is refusing to fulfill it.
Authorization will not help and the request SHOULD NOT be repeated. Authorization will not help and the request SHOULD NOT be repeated.
If the request method was not HEAD and the server wishes to make If the request method was not HEAD and the server wishes to make
public why the request has not been fulfilled, it SHOULD describe the public why the request has not been fulfilled, it SHOULD describe the
reason for the refusal in the entity. If the server does not wish to reason for the refusal in the entity. If the server does not wish to
make this information available to the client, the status code 404 make this information available to the client, the status code 404
(Not Found) can be used instead. (Not Found) can be used instead.
10.4.5 404 Not Found 10.4.5. 404 Not Found
The server has not found anything matching the Request-URI. No The server has not found anything matching the Request-URI. No
indication is given of whether the condition is temporary or indication is given of whether the condition is temporary or
permanent. The 410 (Gone) status code SHOULD be used if the server permanent. The 410 (Gone) status code SHOULD be used if the server
knows, through some internally configurable mechanism, that an old knows, through some internally configurable mechanism, that an old
resource is permanently unavailable and has no forwarding address. resource is permanently unavailable and has no forwarding address.
This status code is commonly used when the server does not wish to This status code is commonly used when the server does not wish to
reveal exactly why the request has been refused, or when no other reveal exactly why the request has been refused, or when no other
response is applicable. response is applicable.
10.4.6 405 Method Not Allowed 10.4.6. 405 Method Not Allowed
The method specified in the Request-Line is not allowed for the The method specified in the Request-Line is not allowed for the
resource identified by the Request-URI. The response MUST include an resource identified by the Request-URI. The response MUST include an
Allow header containing a list of valid methods for the requested Allow header containing a list of valid methods for the requested
resource. resource.
10.4.7 406 Not Acceptable 10.4.7. 406 Not Acceptable
The resource identified by the request is only capable of generating The resource identified by the request is only capable of generating
response entities which have content characteristics not acceptable response entities which have content characteristics not acceptable
according to the accept headers sent in the request. according to the accept headers sent in the request.
Unless it was a HEAD request, the response SHOULD include an entity Unless it was a HEAD request, the response SHOULD include an entity
containing a list of available entity characteristics and location(s) containing a list of available entity characteristics and location(s)
from which the user or user agent can choose the one most from which the user or user agent can choose the one most
appropriate. The entity format is specified by the media type given appropriate. The entity format is specified by the media type given
in the Content-Type header field. Depending upon the format and the in the Content-Type header field. Depending upon the format and the
capabilities of the user agent, selection of the most appropriate capabilities of the user agent, selection of the most appropriate
choice MAY be performed automatically. However, this specification choice MAY be performed automatically. However, this specification
does not define any standard for such automatic selection. does not define any standard for such automatic selection.
Note: HTTP/1.1 servers are allowed to return responses which are Note: HTTP/1.1 servers are allowed to return responses which are
not acceptable according to the accept headers sent in the not acceptable according to the accept headers sent in the
request. In some cases, this may even be preferable to sending a request. In some cases, this may even be preferable to sending a
406 response. User agents are encouraged to inspect the headers of 406 response. User agents are encouraged to inspect the headers
an incoming response to determine if it is acceptable. of an incoming response to determine if it is acceptable.
If the response could be unacceptable, a user agent SHOULD If the response could be unacceptable, a user agent SHOULD
temporarily stop receipt of more data and query the user for a temporarily stop receipt of more data and query the user for a
decision on further actions. decision on further actions.
10.4.8 407 Proxy Authentication Required 10.4.8. 407 Proxy Authentication Required
This code is similar to 401 (Unauthorized), but indicates that the This code is similar to 401 (Unauthorized), but indicates that the
client must first authenticate itself with the proxy. The proxy MUST client must first authenticate itself with the proxy. The proxy MUST
return a Proxy-Authenticate header field (section 14.33) containing a return a Proxy-Authenticate header field (Section 14.33) containing a
challenge applicable to the proxy for the requested resource. The challenge applicable to the proxy for the requested resource. The
client MAY repeat the request with a suitable Proxy-Authorization client MAY repeat the request with a suitable Proxy-Authorization
header field (section 14.34). HTTP access authentication is explained header field (Section 14.34). HTTP access authentication is
in "HTTP Authentication: Basic and Digest Access Authentication" explained in "HTTP Authentication: Basic and Digest Access
[43]. Authentication" [RFC2617].
10.4.9 408 Request Timeout 10.4.9. 408 Request Timeout
The client did not produce a request within the time that the server The client did not produce a request within the time that the server
was prepared to wait. The client MAY repeat the request without was prepared to wait. The client MAY repeat the request without
modifications at any later time. modifications at any later time.
10.4.10 409 Conflict 10.4.10. 409 Conflict
The request could not be completed due to a conflict with the current The request could not be completed due to a conflict with the current
state of the resource. This code is only allowed in situations where state of the resource. This code is only allowed in situations where
it is expected that the user might be able to resolve the conflict it is expected that the user might be able to resolve the conflict
and resubmit the request. The response body SHOULD include enough and resubmit the request. The response body SHOULD include enough
information for the user to recognize the source of the conflict. information for the user to recognize the source of the conflict.
Ideally, the response entity would include enough information for the Ideally, the response entity would include enough information for the
user or user agent to fix the problem; however, that might not be user or user agent to fix the problem; however, that might not be
possible and is not required. possible and is not required.
Conflicts are most likely to occur in response to a PUT request. For Conflicts are most likely to occur in response to a PUT request. For
example, if versioning were being used and the entity being PUT example, if versioning were being used and the entity being PUT
included changes to a resource which conflict with those made by an included changes to a resource which conflict with those made by an
earlier (third-party) request, the server might use the 409 response earlier (third-party) request, the server might use the 409 response
to indicate that it can't complete the request. In this case, the to indicate that it can't complete the request. In this case, the
response entity would likely contain a list of the differences response entity would likely contain a list of the differences
between the two versions in a format defined by the response between the two versions in a format defined by the response Content-
Content-Type. Type.
10.4.11 410 Gone 10.4.11. 410 Gone
The requested resource is no longer available at the server and no The requested resource is no longer available at the server and no
forwarding address is known. This condition is expected to be forwarding address is known. This condition is expected to be
considered permanent. Clients with link editing capabilities SHOULD considered permanent. Clients with link editing capabilities SHOULD
delete references to the Request-URI after user approval. If the delete references to the Request-URI after user approval. If the
server does not know, or has no facility to determine, whether or not server does not know, or has no facility to determine, whether or not
the condition is permanent, the status code 404 (Not Found) SHOULD be the condition is permanent, the status code 404 (Not Found) SHOULD be
used instead. This response is cacheable unless indicated otherwise. used instead. This response is cacheable unless indicated otherwise.
The 410 response is primarily intended to assist the task of web The 410 response is primarily intended to assist the task of web
maintenance by notifying the recipient that the resource is maintenance by notifying the recipient that the resource is
intentionally unavailable and that the server owners desire that intentionally unavailable and that the server owners desire that
remote links to that resource be removed. Such an event is common for remote links to that resource be removed. Such an event is common
limited-time, promotional services and for resources belonging to for limited-time, promotional services and for resources belonging to
individuals no longer working at the server's site. It is not individuals no longer working at the server's site. It is not
necessary to mark all permanently unavailable resources as "gone" or necessary to mark all permanently unavailable resources as "gone" or
to keep the mark for any length of time -- that is left to the to keep the mark for any length of time -- that is left to the
discretion of the server owner. discretion of the server owner.
10.4.12 411 Length Required 10.4.12. 411 Length Required
The server refuses to accept the request without a defined Content- The server refuses to accept the request without a defined Content-
Length. The client MAY repeat the request if it adds a valid Length. The client MAY repeat the request if it adds a valid
Content-Length header field containing the length of the message-body Content-Length header field containing the length of the message-body
in the request message. in the request message.
10.4.13 412 Precondition Failed 10.4.13. 412 Precondition Failed
The precondition given in one or more of the request-header fields The precondition given in one or more of the request-header fields
evaluated to false when it was tested on the server. This response evaluated to false when it was tested on the server. This response
code allows the client to place preconditions on the current resource code allows the client to place preconditions on the current resource
metainformation (header field data) and thus prevent the requested metainformation (header field data) and thus prevent the requested
method from being applied to a resource other than the one intended. method from being applied to a resource other than the one intended.
10.4.14 413 Request Entity Too Large 10.4.14. 413 Request Entity Too Large
The server is refusing to process a request because the request The server is refusing to process a request because the request
entity is larger than the server is willing or able to process. The entity is larger than the server is willing or able to process. The
server MAY close the connection to prevent the client from continuing server MAY close the connection to prevent the client from continuing
the request. the request.
If the condition is temporary, the server SHOULD include a Retry- If the condition is temporary, the server SHOULD include a Retry-
After header field to indicate that it is temporary and after what After header field to indicate that it is temporary and after what
time the client MAY try again. time the client MAY try again.
10.4.15 414 Request-URI Too Long 10.4.15. 414 Request-URI Too Long
The server is refusing to service the request because the Request-URI The server is refusing to service the request because the Request-URI
is longer than the server is willing to interpret. This rare is longer than the server is willing to interpret. This rare
condition is only likely to occur when a client has improperly condition is only likely to occur when a client has improperly
converted a POST request to a GET request with long query converted a POST request to a GET request with long query
information, when the client has descended into a URI "black hole" of information, when the client has descended into a URI "black hole" of
redirection (e.g., a redirected URI prefix that points to a suffix of redirection (e.g., a redirected URI prefix that points to a suffix of
itself), or when the server is under attack by a client attempting to itself), or when the server is under attack by a client attempting to
exploit security holes present in some servers using fixed-length exploit security holes present in some servers using fixed-length
buffers for reading or manipulating the Request-URI. buffers for reading or manipulating the Request-URI.
10.4.16 415 Unsupported Media Type 10.4.16. 415 Unsupported Media Type
The server is refusing to service the request because the entity of The server is refusing to service the request because the entity of
the request is in a format not supported by the requested resource the request is in a format not supported by the requested resource
for the requested method. for the requested method.
10.4.17 416 Requested Range Not Satisfiable 10.4.17. 416 Requested Range Not Satisfiable
A server SHOULD return a response with this status code if a request A server SHOULD return a response with this status code if a request
included a Range request-header field (section 14.35), and none of included a Range request-header field (Section 14.35), and none of
the range-specifier values in this field overlap the current extent the range-specifier values in this field overlap the current extent
of the selected resource, and the request did not include an If-Range of the selected resource, and the request did not include an If-Range
request-header field. (For byte-ranges, this means that the first- request-header field. (For byte-ranges, this means that the first-
byte-pos of all of the byte-range-spec values were greater than the byte-pos of all of the byte-range-spec values were greater than the
current length of the selected resource.) current length of the selected resource.)
When this status code is returned for a byte-range request, the When this status code is returned for a byte-range request, the
response SHOULD include a Content-Range entity-header field response SHOULD include a Content-Range entity-header field
specifying the current length of the selected resource (see section specifying the current length of the selected resource (see
14.16). This response MUST NOT use the multipart/byteranges content- Section 14.16). This response MUST NOT use the multipart/byteranges
type. content-type.
10.4.18 417 Expectation Failed 10.4.18. 417 Expectation Failed
The expectation given in an Expect request-header field (see section The expectation given in an Expect request-header field (see
14.20) could not be met by this server, or, if the server is a proxy, Section 14.20) could not be met by this server, or, if the server is
the server has unambiguous evidence that the request could not be met a proxy, the server has unambiguous evidence that the request could
by the next-hop server. not be met by the next-hop server.
10.5 Server Error 5xx 10.5. Server Error 5xx
Response status codes beginning with the digit "5" indicate cases in Response status codes beginning with the digit "5" indicate cases in
which the server is aware that it has erred or is incapable of which the server is aware that it has erred or is incapable of
performing the request. Except when responding to a HEAD request, the performing the request. Except when responding to a HEAD request,
server SHOULD include an entity containing an explanation of the the server SHOULD include an entity containing an explanation of the
error situation, and whether it is a temporary or permanent error situation, and whether it is a temporary or permanent
condition. User agents SHOULD display any included entity to the condition. User agents SHOULD display any included entity to the
user. These response codes are applicable to any request method. user. These response codes are applicable to any request method.
10.5.1 500 Internal Server Error 10.5.1. 500 Internal Server Error
The server encountered an unexpected condition which prevented it The server encountered an unexpected condition which prevented it
from fulfilling the request. from fulfilling the request.
10.5.2 501 Not Implemented 10.5.2. 501 Not Implemented
The server does not support the functionality required to fulfill the The server does not support the functionality required to fulfill the
request. This is the appropriate response when the server does not request. This is the appropriate response when the server does not
recognize the request method and is not capable of supporting it for recognize the request method and is not capable of supporting it for
any resource. any resource.
10.5.3 502 Bad Gateway 10.5.3. 502 Bad Gateway
The server, while acting as a gateway or proxy, received an invalid The server, while acting as a gateway or proxy, received an invalid
response from the upstream server it accessed in attempting to response from the upstream server it accessed in attempting to
fulfill the request. fulfill the request.
10.5.4 503 Service Unavailable 10.5.4. 503 Service Unavailable
The server is currently unable to handle the request due to a The server is currently unable to handle the request due to a
temporary overloading or maintenance of the server. The implication temporary overloading or maintenance of the server. The implication
is that this is a temporary condition which will be alleviated after is that this is a temporary condition which will be alleviated after
some delay. If known, the length of the delay MAY be indicated in a some delay. If known, the length of the delay MAY be indicated in a
Retry-After header. If no Retry-After is given, the client SHOULD Retry-After header. If no Retry-After is given, the client SHOULD
handle the response as it would for a 500 response. handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a Note: The existence of the 503 status code does not imply that a
server must use it when becoming overloaded. Some servers may wish server must use it when becoming overloaded. Some servers may
to simply refuse the connection. wish to simply refuse the connection.
10.5.5 504 Gateway Timeout 10.5.5. 504 Gateway Timeout
The server, while acting as a gateway or proxy, did not receive a The server, while acting as a gateway or proxy, did not receive a
timely response from the upstream server specified by the URI (e.g. timely response from the upstream server specified by the URI (e.g.
HTTP, FTP, LDAP) or some other auxiliary server (e.g. DNS) it needed HTTP, FTP, LDAP) or some other auxiliary server (e.g. DNS) it needed
to access in attempting to complete the request. to access in attempting to complete the request.
Note: Note to implementors: some deployed proxies are known to Note: Note to implementors: some deployed proxies are known to
return 400 or 500 when DNS lookups time out. return 400 or 500 when DNS lookups time out.
10.5.6 505 HTTP Version Not Supported 10.5.6. 505 HTTP Version Not Supported
The server does not support, or refuses to support, the HTTP protocol The server does not support, or refuses to support, the HTTP protocol
version that was used in the request message. The server is version that was used in the request message. The server is
indicating that it is unable or unwilling to complete the request indicating that it is unable or unwilling to complete the request
using the same major version as the client, as described in section using the same major version as the client, as described in
3.1, other than with this error message. The response SHOULD contain Section 3.1, other than with this error message. The response SHOULD
an entity describing why that version is not supported and what other contain an entity describing why that version is not supported and
protocols are supported by that server. what other protocols are supported by that server.
11 Access Authentication 11. Access Authentication
HTTP provides several OPTIONAL challenge-response authentication HTTP provides several OPTIONAL challenge-response authentication
mechanisms which can be used by a server to challenge a client mechanisms which can be used by a server to challenge a client
request and by a client to provide authentication information. The request and by a client to provide authentication information. The
general framework for access authentication, and the specification of general framework for access authentication, and the specification of
"basic" and "digest" authentication, are specified in "HTTP "basic" and "digest" authentication, are specified in "HTTP
Authentication: Basic and Digest Access Authentication" [43]. This Authentication: Basic and Digest Access Authentication" [RFC2617].
specification adopts the definitions of "challenge" and "credentials" This specification adopts the definitions of "challenge" and
from that specification. "credentials" from that specification.
12 Content Negotiation 12. Content Negotiation
Most HTTP responses include an entity which contains information for Most HTTP responses include an entity which contains information for
interpretation by a human user. Naturally, it is desirable to supply interpretation by a human user. Naturally, it is desirable to supply
the user with the "best available" entity corresponding to the the user with the "best available" entity corresponding to the
request. Unfortunately for servers and caches, not all users have the request. Unfortunately for servers and caches, not all users have
same preferences for what is "best," and not all user agents are the same preferences for what is "best," and not all user agents are
equally capable of rendering all entity types. For that reason, HTTP equally capable of rendering all entity types. For that reason, HTTP
has provisions for several mechanisms for "content negotiation" -- has provisions for several mechanisms for "content negotiation" --
the process of selecting the best representation for a given response the process of selecting the best representation for a given response
when there are multiple representations available. when there are multiple representations available.
Note: This is not called "format negotiation" because the Note: This is not called "format negotiation" because the
alternate representations may be of the same media type, but use alternate representations may be of the same media type, but use
different capabilities of that type, be in different languages, different capabilities of that type, be in different languages,
etc. etc.
Any response containing an entity-body MAY be subject to negotiation, Any response containing an entity-body MAY be subject to negotiation,
including error responses. including error responses.
There are two kinds of content negotiation which are possible in There are two kinds of content negotiation which are possible in
HTTP: server-driven and agent-driven negotiation. These two kinds of HTTP: server-driven and agent-driven negotiation. These two kinds of
negotiation are orthogonal and thus may be used separately or in negotiation are orthogonal and thus may be used separately or in
combination. One method of combination, referred to as transparent combination. One method of combination, referred to as transparent
negotiation, occurs when a cache uses the agent-driven negotiation negotiation, occurs when a cache uses the agent-driven negotiation
information provided by the origin server in order to provide information provided by the origin server in order to provide server-
server-driven negotiation for subsequent requests. driven negotiation for subsequent requests.
12.1 Server-driven Negotiation 12.1. Server-driven Negotiation
If the selection of the best representation for a response is made by If the selection of the best representation for a response is made by
an algorithm located at the server, it is called server-driven an algorithm located at the server, it is called server-driven
negotiation. Selection is based on the available representations of negotiation. Selection is based on the available representations of
the response (the dimensions over which it can vary; e.g. language, the response (the dimensions over which it can vary; e.g. language,
content-coding, etc.) and the contents of particular header fields in content-coding, etc.) and the contents of particular header fields in
the request message or on other information pertaining to the request the request message or on other information pertaining to the request
(such as the network address of the client). (such as the network address of the client).
Server-driven negotiation is advantageous when the algorithm for Server-driven negotiation is advantageous when the algorithm for
selecting from among the available representations is difficult to selecting from among the available representations is difficult to
describe to the user agent, or when the server desires to send its describe to the user agent, or when the server desires to send its
"best guess" to the client along with the first response (hoping to "best guess" to the client along with the first response (hoping to
avoid the round-trip delay of a subsequent request if the "best avoid the round-trip delay of a subsequent request if the "best
guess" is good enough for the user). In order to improve the server's guess" is good enough for the user). In order to improve the
guess, the user agent MAY include request header fields (Accept, server's guess, the user agent MAY include request header fields
Accept-Language, Accept-Encoding, etc.) which describe its (Accept, Accept-Language, Accept-Encoding, etc.) which describe its
preferences for such a response. preferences for such a response.
Server-driven negotiation has disadvantages: Server-driven negotiation has disadvantages:
1. It is impossible for the server to accurately determine what 1. It is impossible for the server to accurately determine what
might be "best" for any given user, since that would require might be "best" for any given user, since that would require
complete knowledge of both the capabilities of the user agent complete knowledge of both the capabilities of the user agent and
and the intended use for the response (e.g., does the user want the intended use for the response (e.g., does the user want to
to view it on screen or print it on paper?). view it on screen or print it on paper?).
2. Having the user agent describe its capabilities in every 2. Having the user agent describe its capabilities in every request
request can be both very inefficient (given that only a small can be both very inefficient (given that only a small percentage
percentage of responses have multiple representations) and a of responses have multiple representations) and a potential
potential violation of the user's privacy. violation of the user's privacy.
3. It complicates the implementation of an origin server and the 3. It complicates the implementation of an origin server and the
algorithms for generating responses to a request. algorithms for generating responses to a request.
4. It may limit a public cache's ability to use the same response 4. It may limit a public cache's ability to use the same response
for multiple user's requests. for multiple user's requests.
HTTP/1.1 includes the following request-header fields for enabling HTTP/1.1 includes the following request-header fields for enabling
server-driven negotiation through description of user agent server-driven negotiation through description of user agent
capabilities and user preferences: Accept (section 14.1), Accept- capabilities and user preferences: Accept (Section 14.1), Accept-
Charset (section 14.2), Accept-Encoding (section 14.3), Accept- Charset (Section 14.2), Accept-Encoding (Section 14.3), Accept-
Language (section 14.4), and User-Agent (section 14.43). However, an Language (Section 14.4), and User-Agent (Section 14.43). However, an
origin server is not limited to these dimensions and MAY vary the origin server is not limited to these dimensions and MAY vary the
response based on any aspect of the request, including information response based on any aspect of the request, including information
outside the request-header fields or within extension header fields outside the request-header fields or within extension header fields
not defined by this specification. not defined by this specification.
The Vary header field can be used to express the parameters the The Vary header field can be used to express the parameters the
server uses to select a representation that is subject to server- server uses to select a representation that is subject to server-
driven negotiation. See section 13.6 for use of the Vary header field driven negotiation. See Section 13.6 for use of the Vary header
by caches and section 14.44 for use of the Vary header field by field by caches and Section 14.44 for use of the Vary header field by
servers. servers.
12.2 Agent-driven Negotiation 12.2. Agent-driven Negotiation
With agent-driven negotiation, selection of the best representation With agent-driven negotiation, selection of the best representation
for a response is performed by the user agent after receiving an for a response is performed by the user agent after receiving an
initial response from the origin server. Selection is based on a list initial response from the origin server. Selection is based on a
of the available representations of the response included within the list of the available representations of the response included within
header fields or entity-body of the initial response, with each the header fields or entity-body of the initial response, with each
representation identified by its own URI. Selection from among the representation identified by its own URI. Selection from among the
representations may be performed automatically (if the user agent is representations may be performed automatically (if the user agent is
capable of doing so) or manually by the user selecting from a capable of doing so) or manually by the user selecting from a
generated (possibly hypertext) menu. generated (possibly hypertext) menu.
Agent-driven negotiation is advantageous when the response would vary Agent-driven negotiation is advantageous when the response would vary
over commonly-used dimensions (such as type, language, or encoding), over commonly-used dimensions (such as type, language, or encoding),
when the origin server is unable to determine a user agent's when the origin server is unable to determine a user agent's
capabilities from examining the request, and generally when public capabilities from examining the request, and generally when public
caches are used to distribute server load and reduce network usage. caches are used to distribute server load and reduce network usage.
skipping to change at page 74, line 10 skipping to change at page 76, line 45
this specification does not define any mechanism for supporting this specification does not define any mechanism for supporting
automatic selection, though it also does not prevent any such automatic selection, though it also does not prevent any such
mechanism from being developed as an extension and used within mechanism from being developed as an extension and used within
HTTP/1.1. HTTP/1.1.
HTTP/1.1 defines the 300 (Multiple Choices) and 406 (Not Acceptable) HTTP/1.1 defines the 300 (Multiple Choices) and 406 (Not Acceptable)
status codes for enabling agent-driven negotiation when the server is status codes for enabling agent-driven negotiation when the server is
unwilling or unable to provide a varying response using server-driven unwilling or unable to provide a varying response using server-driven
negotiation. negotiation.
12.3 Transparent Negotiation 12.3. Transparent Negotiation
Transparent negotiation is a combination of both server-driven and Transparent negotiation is a combination of both server-driven and
agent-driven negotiation. When a cache is supplied with a form of the agent-driven negotiation. When a cache is supplied with a form of
list of available representations of the response (as in agent-driven the list of available representations of the response (as in agent-
negotiation) and the dimensions of variance are completely understood driven negotiation) and the dimensions of variance are completely
by the cache, then the cache becomes capable of performing server- understood by the cache, then the cache becomes capable of performing
driven negotiation on behalf of the origin server for subsequent server-driven negotiation on behalf of the origin server for
requests on that resource. subsequent requests on that resource.
Transparent negotiation has the advantage of distributing the Transparent negotiation has the advantage of distributing the
negotiation work that would otherwise be required of the origin negotiation work that would otherwise be required of the origin
server and also removing the second request delay of agent-driven server and also removing the second request delay of agent-driven
negotiation when the cache is able to correctly guess the right negotiation when the cache is able to correctly guess the right
response. response.
This specification does not define any mechanism for transparent This specification does not define any mechanism for transparent
negotiation, though it also does not prevent any such mechanism from negotiation, though it also does not prevent any such mechanism from
being developed as an extension that could be used within HTTP/1.1. being developed as an extension that could be used within HTTP/1.1.
13 Caching in HTTP 13. Caching in HTTP
HTTP is typically used for distributed information systems, where HTTP is typically used for distributed information systems, where
performance can be improved by the use of response caches. The performance can be improved by the use of response caches. The
HTTP/1.1 protocol includes a number of elements intended to make HTTP/1.1 protocol includes a number of elements intended to make
caching work as well as possible. Because these elements are caching work as well as possible. Because these elements are
inextricable from other aspects of the protocol, and because they inextricable from other aspects of the protocol, and because they
interact with each other, it is useful to describe the basic caching interact with each other, it is useful to describe the basic caching
design of HTTP separately from the detailed descriptions of methods, design of HTTP separately from the detailed descriptions of methods,
headers, response codes, etc. headers, response codes, etc.
Caching would be useless if it did not significantly improve Caching would be useless if it did not significantly improve
performance. The goal of caching in HTTP/1.1 is to eliminate the need performance. The goal of caching in HTTP/1.1 is to eliminate the
to send requests in many cases, and to eliminate the need to send need to send requests in many cases, and to eliminate the need to
full responses in many other cases. The former reduces the number of send full responses in many other cases. The former reduces the
network round-trips required for many operations; we use an number of network round-trips required for many operations; we use an
"expiration" mechanism for this purpose (see section 13.2). The "expiration" mechanism for this purpose (see Section 13.2). The
latter reduces network bandwidth requirements; we use a "validation" latter reduces network bandwidth requirements; we use a "validation"
mechanism for this purpose (see section 13.3). mechanism for this purpose (see Section 13.3).
Requirements for performance, availability, and disconnected Requirements for performance, availability, and disconnected
operation require us to be able to relax the goal of semantic operation require us to be able to relax the goal of semantic
transparency. The HTTP/1.1 protocol allows origin servers, caches, transparency. The HTTP/1.1 protocol allows origin servers, caches,
and clients to explicitly reduce transparency when necessary. and clients to explicitly reduce transparency when necessary.
However, because non-transparent operation may confuse non-expert However, because non-transparent operation may confuse non-expert
users, and might be incompatible with certain server applications users, and might be incompatible with certain server applications
(such as those for ordering merchandise), the protocol requires that (such as those for ordering merchandise), the protocol requires that
transparency be relaxed transparency be relaxed
- only by an explicit protocol-level request when relaxed by o only by an explicit protocol-level request when relaxed by client
client or origin server or origin server
- only with an explicit warning to the end user when relaxed by o only with an explicit warning to the end user when relaxed by
cache or client cache or client
Therefore, the HTTP/1.1 protocol provides these important elements: Therefore, the HTTP/1.1 protocol provides these important elements:
1. Protocol features that provide full semantic transparency when 1. Protocol features that provide full semantic transparency when
this is required by all parties. this is required by all parties.
2. Protocol features that allow an origin server or user agent to 2. Protocol features that allow an origin server or user agent to
explicitly request and control non-transparent operation. explicitly request and control non-transparent operation.
3. Protocol features that allow a cache to attach warnings to 3. Protocol features that allow a cache to attach warnings to
responses that do not preserve the requested approximation of responses that do not preserve the requested approximation of
skipping to change at page 75, line 38 skipping to change at page 78, line 26
A basic principle is that it must be possible for the clients to A basic principle is that it must be possible for the clients to
detect any potential relaxation of semantic transparency. detect any potential relaxation of semantic transparency.
Note: The server, cache, or client implementor might be faced with Note: The server, cache, or client implementor might be faced with
design decisions not explicitly discussed in this specification. design decisions not explicitly discussed in this specification.
If a decision might affect semantic transparency, the implementor If a decision might affect semantic transparency, the implementor
ought to err on the side of maintaining transparency unless a ought to err on the side of maintaining transparency unless a
careful and complete analysis shows significant benefits in careful and complete analysis shows significant benefits in
breaking transparency. breaking transparency.
13.1.1 Cache Correctness 13.1.
13.1.1. Cache Correctness
A correct cache MUST respond to a request with the most up-to-date A correct cache MUST respond to a request with the most up-to-date
response held by the cache that is appropriate to the request (see response held by the cache that is appropriate to the request (see
sections 13.2.5, 13.2.6, and 13.12) which meets one of the following sections 13.2.5, 13.2.6, and 13.12) which meets one of the following
conditions: conditions:
1. It has been checked for equivalence with what the origin server 1. It has been checked for equivalence with what the origin server
would have returned by revalidating the response with the would have returned by revalidating the response with the origin
origin server (section 13.3); server (Section 13.3);
2. It is "fresh enough" (see section 13.2). In the default case,
2. It is "fresh enough" (see Section 13.2). In the default case,
this means it meets the least restrictive freshness requirement this means it meets the least restrictive freshness requirement
of the client, origin server, and cache (see section 14.9); if of the client, origin server, and cache (see Section 14.9); if
the origin server so specifies, it is the freshness requirement the origin server so specifies, it is the freshness requirement
of the origin server alone. of the origin server alone. If a stored response is not "fresh
enough" by the most restrictive freshness requirement of both the
If a stored response is not "fresh enough" by the most client and the origin server, in carefully considered
restrictive freshness requirement of both the client and the circumstances the cache MAY still return the response with the
origin server, in carefully considered circumstances the cache appropriate Warning header (see section 13.1.5 and 14.46), unless
MAY still return the response with the appropriate Warning such a response is prohibited (e.g., by a "no-store" cache-
header (see section 13.1.5 and 14.46), unless such a response directive, or by a "no-cache" cache-request-directive; see
is prohibited (e.g., by a "no-store" cache-directive, or by a Section 14.9).
"no-cache" cache-request-directive; see section 14.9).
3. It is an appropriate 304 (Not Modified), 305 (Proxy Redirect), 3. It is an appropriate 304 (Not Modified), 305 (Proxy Redirect), or
or error (4xx or 5xx) response message. error (4xx or 5xx) response message.
If the cache can not communicate with the origin server, then a If the cache can not communicate with the origin server, then a
correct cache SHOULD respond as above if the response can be correct cache SHOULD respond as above if the response can be
correctly served from the cache; if not it MUST return an error or correctly served from the cache; if not it MUST return an error or
warning indicating that there was a communication failure. warning indicating that there was a communication failure.
If a cache receives a response (either an entire response, or a 304 If a cache receives a response (either an entire response, or a 304
(Not Modified) response) that it would normally forward to the (Not Modified) response) that it would normally forward to the
requesting client, and the received response is no longer fresh, the requesting client, and the received response is no longer fresh, the
cache SHOULD forward it to the requesting client without adding a new cache SHOULD forward it to the requesting client without adding a new
Warning (but without removing any existing Warning headers). A cache Warning (but without removing any existing Warning headers). A cache
SHOULD NOT attempt to revalidate a response simply because that SHOULD NOT attempt to revalidate a response simply because that
response became stale in transit; this might lead to an infinite response became stale in transit; this might lead to an infinite
loop. A user agent that receives a stale response without a Warning loop. A user agent that receives a stale response without a Warning
MAY display a warning indication to the user. MAY display a warning indication to the user.
13.1.2 Warnings 13.1.2. Warnings
Whenever a cache returns a response that is neither first-hand nor Whenever a cache returns a response that is neither first-hand nor
"fresh enough" (in the sense of condition 2 in section 13.1.1), it "fresh enough" (in the sense of condition 2 in Section 13.1.1), it
MUST attach a warning to that effect, using a Warning general-header. MUST attach a warning to that effect, using a Warning general-header.
The Warning header and the currently defined warnings are described The Warning header and the currently defined warnings are described
in section 14.46. The warning allows clients to take appropriate in Section 14.46. The warning allows clients to take appropriate
action. action.
Warnings MAY be used for other purposes, both cache-related and Warnings MAY be used for other purposes, both cache-related and
otherwise. The use of a warning, rather than an error status code, otherwise. The use of a warning, rather than an error status code,
distinguish these responses from true failures. distinguish these responses from true failures.
Warnings are assigned three digit warn-codes. The first digit Warnings are assigned three digit warn-codes. The first digit
indicates whether the Warning MUST or MUST NOT be deleted from a indicates whether the Warning MUST or MUST NOT be deleted from a
stored cache entry after a successful revalidation: stored cache entry after a successful revalidation:
1xx Warnings that describe the freshness or revalidation status of 1xx Warnings that describe the freshness or revalidation status of
the response, and so MUST be deleted after a successful the response, and so MUST be deleted after a successful
revalidation. 1XX warn-codes MAY be generated by a cache only when revalidation. 1XX warn-codes MAY be generated by a cache only when
validating a cached entry. It MUST NOT be generated by clients. validating a cached entry. It MUST NOT be generated by clients.
2xx Warnings that describe some aspect of the entity body or entity 2xx Warnings that describe some aspect of the entity body or entity
headers that is not rectified by a revalidation (for example, a headers that is not rectified by a revalidation (for example, a
lossy compression of the entity bodies) and which MUST NOT be lossy compression of the entity bodies) and which MUST NOT be
deleted after a successful revalidation. deleted after a successful revalidation.
See section 14.46 for the definitions of the codes themselves. See Section 14.46 for the definitions of the codes themselves.
HTTP/1.0 caches will cache all Warnings in responses, without HTTP/1.0 caches will cache all Warnings in responses, without
deleting the ones in the first category. Warnings in responses that deleting the ones in the first category. Warnings in responses that
are passed to HTTP/1.0 caches carry an extra warning-date field, are passed to HTTP/1.0 caches carry an extra warning-date field,
which prevents a future HTTP/1.1 recipient from believing an which prevents a future HTTP/1.1 recipient from believing an
erroneously cached Warning. erroneously cached Warning.
Warnings also carry a warning text. The text MAY be in any Warnings also carry a warning text. The text MAY be in any
appropriate natural language (perhaps based on the client's Accept appropriate natural language (perhaps based on the client's Accept
headers), and include an OPTIONAL indication of what character set is headers), and include an OPTIONAL indication of what character set is
skipping to change at page 77, line 39 skipping to change at page 80, line 25
server or by a cache), including multiple warnings with the same code server or by a cache), including multiple warnings with the same code
number. For example, a server might provide the same warning with number. For example, a server might provide the same warning with
texts in both English and Basque. texts in both English and Basque.
When multiple warnings are attached to a response, it might not be When multiple warnings are attached to a response, it might not be
practical or reasonable to display all of them to the user. This practical or reasonable to display all of them to the user. This
version of HTTP does not specify strict priority rules for deciding version of HTTP does not specify strict priority rules for deciding
which warnings to display and in what order, but does suggest some which warnings to display and in what order, but does suggest some
heuristics. heuristics.
13.1.3 Cache-control Mechanisms 13.1.3. Cache-control Mechanisms
The basic cache mechanisms in HTTP/1.1 (server-specified expiration The basic cache mechanisms in HTTP/1.1 (server-specified expiration
times and validators) are implicit directives to caches. In some times and validators) are implicit directives to caches. In some
cases, a server or client might need to provide explicit directives cases, a server or client might need to provide explicit directives
to the HTTP caches. We use the Cache-Control header for this purpose. to the HTTP caches. We use the Cache-Control header for this
purpose.
The Cache-Control header allows a client or server to transmit a The Cache-Control header allows a client or server to transmit a
variety of directives in either requests or responses. These variety of directives in either requests or responses. These
directives typically override the default caching algorithms. As a directives typically override the default caching algorithms. As a
general rule, if there is any apparent conflict between header general rule, if there is any apparent conflict between header
values, the most restrictive interpretation is applied (that is, the values, the most restrictive interpretation is applied (that is, the
one that is most likely to preserve semantic transparency). However, one that is most likely to preserve semantic transparency). However,
in some cases, cache-control directives are explicitly specified as in some cases, cache-control directives are explicitly specified as
weakening the approximation of semantic transparency (for example, weakening the approximation of semantic transparency (for example,
"max-stale" or "public"). "max-stale" or "public").
The cache-control directives are described in detail in section 14.9. The cache-control directives are described in detail in Section 14.9.
13.1.4 Explicit User Agent Warnings 13.1.4. Explicit User Agent Warnings
Many user agents make it possible for users to override the basic Many user agents make it possible for users to override the basic
caching mechanisms. For example, the user agent might allow the user caching mechanisms. For example, the user agent might allow the user
to specify that cached entities (even explicitly stale ones) are to specify that cached entities (even explicitly stale ones) are
never validated. Or the user agent might habitually add "Cache- never validated. Or the user agent might habitually add "Cache-
Control: max-stale=3600" to every request. The user agent SHOULD NOT Control: max-stale=3600" to every request. The user agent SHOULD NOT
default to either non-transparent behavior, or behavior that results default to either non-transparent behavior, or behavior that results
in abnormally ineffective caching, but MAY be explicitly configured in abnormally ineffective caching, but MAY be explicitly configured
to do so by an explicit action of the user. to do so by an explicit action of the user.
If the user has overridden the basic caching mechanisms, the user If the user has overridden the basic caching mechanisms, the user
agent SHOULD explicitly indicate to the user whenever this results in agent SHOULD explicitly indicate to the user whenever this results in
the display of information that might not meet the server's the display of information that might not meet the server's
transparency requirements (in particular, if the displayed entity is transparency requirements (in particular, if the displayed entity is
known to be stale). Since the protocol normally allows the user agent known to be stale). Since the protocol normally allows the user
to determine if responses are stale or not, this indication need only agent to determine if responses are stale or not, this indication
be displayed when this actually happens. The indication need not be a need only be displayed when this actually happens. The indication
dialog box; it could be an icon (for example, a picture of a rotting need not be a dialog box; it could be an icon (for example, a picture
fish) or some other indicator. of a rotting fish) or some other indicator.
If the user has overridden the caching mechanisms in a way that would If the user has overridden the caching mechanisms in a way that would
abnormally reduce the effectiveness of caches, the user agent SHOULD abnormally reduce the effectiveness of caches, the user agent SHOULD
continually indicate this state to the user (for example, by a continually indicate this state to the user (for example, by a
display of a picture of currency in flames) so that the user does not display of a picture of currency in flames) so that the user does not
inadvertently consume excess resources or suffer from excessive inadvertently consume excess resources or suffer from excessive
latency. latency.
13.1.5 Exceptions to the Rules and Warnings 13.1.5. Exceptions to the Rules and Warnings
In some cases, the operator of a cache MAY choose to configure it to In some cases, the operator of a cache MAY choose to configure it to
return stale responses even when not requested by clients. This return stale responses even when not requested by clients. This
decision ought not be made lightly, but may be necessary for reasons decision ought not be made lightly, but may be necessary for reasons
of availability or performance, especially when the cache is poorly of availability or performance, especially when the cache is poorly
connected to the origin server. Whenever a cache returns a stale connected to the origin server. Whenever a cache returns a stale
response, it MUST mark it as such (using a Warning header) enabling response, it MUST mark it as such (using a Warning header) enabling
the client software to alert the user that there might be a potential the client software to alert the user that there might be a potential
problem. problem.
It also allows the user agent to take steps to obtain a first-hand or It also allows the user agent to take steps to obtain a first-hand or
fresh response. For this reason, a cache SHOULD NOT return a stale fresh response. For this reason, a cache SHOULD NOT return a stale
response if the client explicitly requests a first-hand or fresh one, response if the client explicitly requests a first-hand or fresh one,
unless it is impossible to comply for technical or policy reasons. unless it is impossible to comply for technical or policy reasons.
13.1.6 Client-controlled Behavior 13.1.6. Client-controlled Behavior
While the origin server (and to a lesser extent, intermediate caches, While the origin server (and to a lesser extent, intermediate caches,
by their contribution to the age of a response) are the primary by their contribution to the age of a response) are the primary
source of expiration information, in some cases the client might need source of expiration information, in some cases the client might need
to control a cache's decision about whether to return a cached to control a cache's decision about whether to return a cached
response without validating it. Clients do this using several response without validating it. Clients do this using several
directives of the Cache-Control header. directives of the Cache-Control header.
A client's request MAY specify the maximum age it is willing to A client's request MAY specify the maximum age it is willing to
accept of an unvalidated response; specifying a value of zero forces accept of an unvalidated response; specifying a value of zero forces
the cache(s) to revalidate all responses. A client MAY also specify the cache(s) to revalidate all responses. A client MAY also specify
the minimum time remaining before a response expires. Both of these the minimum time remaining before a response expires. Both of these
options increase constraints on the behavior of caches, and so cannot options increase constraints on the behavior of caches, and so cannot
further relax the cache's approximation of semantic transparency. further relax the cache's approximation of semantic transparency.
A client MAY also specify that it will accept stale responses, up to A client MAY also specify that it will accept stale responses, up to
some maximum amount of staleness. This loosens the constraints on the some maximum amount of staleness. This loosens the constraints on
caches, and so might violate the origin server's specified the caches, and so might violate the origin server's specified
constraints on semantic transparency, but might be necessary to constraints on semantic transparency, but might be necessary to
support disconnected operation, or high availability in the face of support disconnected operation, or high availability in the face of
poor connectivity. poor connectivity.
13.2 Expiration Model 13.2. Expiration Model
13.2.1 Server-Specified Expiration 13.2.1. Server-Specified Expiration
HTTP caching works best when caches can entirely avoid making HTTP caching works best when caches can entirely avoid making
requests to the origin server. The primary mechanism for avoiding requests to the origin server. The primary mechanism for avoiding
requests is for an origin server to provide an explicit expiration requests is for an origin server to provide an explicit expiration
time in the future, indicating that a response MAY be used to satisfy time in the future, indicating that a response MAY be used to satisfy
subsequent requests. In other words, a cache can return a fresh subsequent requests. In other words, a cache can return a fresh
response without first contacting the server. response without first contacting the server.
Our expectation is that servers will assign future explicit Our expectation is that servers will assign future explicit
expiration times to responses in the belief that the entity is not expiration times to responses in the belief that the entity is not
skipping to change at page 80, line 11 skipping to change at page 82, line 40
expiration time is reached. This normally preserves semantic expiration time is reached. This normally preserves semantic
transparency, as long as the server's expiration times are carefully transparency, as long as the server's expiration times are carefully
chosen. chosen.
The expiration mechanism applies only to responses taken from a cache The expiration mechanism applies only to responses taken from a cache
and not to first-hand responses forwarded immediately to the and not to first-hand responses forwarded immediately to the
requesting client. requesting client.
If an origin server wishes to force a semantically transparent cache If an origin server wishes to force a semantically transparent cache
to validate every request, it MAY assign an explicit expiration time to validate every request, it MAY assign an explicit expiration time
in the past. This means that the response is always stale, and so the in the past. This means that the response is always stale, and so
cache SHOULD validate it before using it for subsequent requests. See the cache SHOULD validate it before using it for subsequent requests.
section 14.9.4 for a more restrictive way to force revalidation. See Section 14.9.4 for a more restrictive way to force revalidation.
If an origin server wishes to force any HTTP/1.1 cache, no matter how If an origin server wishes to force any HTTP/1.1 cache, no matter how
it is configured, to validate every request, it SHOULD use the "must- it is configured, to validate every request, it SHOULD use the "must-
revalidate" cache-control directive (see section 14.9). revalidate" cache-control directive (see Section 14.9).
Servers specify explicit expiration times using either the Expires Servers specify explicit expiration times using either the Expires
header, or the max-age directive of the Cache-Control header. header, or the max-age directive of the Cache-Control header.
An expiration time cannot be used to force a user agent to refresh An expiration time cannot be used to force a user agent to refresh
its display or reload a resource; its semantics apply only to caching its display or reload a resource; its semantics apply only to caching
mechanisms, and such mechanisms need only check a resource's mechanisms, and such mechanisms need only check a resource's
expiration status when a new request for that resource is initiated. expiration status when a new request for that resource is initiated.
See section 13.13 for an explanation of the difference between caches See Section 13.13 for an explanation of the difference between caches
and history mechanisms. and history mechanisms.
13.2.2 Heuristic Expiration 13.2.2. Heuristic Expiration
Since origin servers do not always provide explicit expiration times, Since origin servers do not always provide explicit expiration times,
HTTP caches typically assign heuristic expiration times, employing HTTP caches typically assign heuristic expiration times, employing
algorithms that use other header values (such as the Last-Modified algorithms that use other header values (such as the Last-Modified
time) to estimate a plausible expiration time. The HTTP/1.1 time) to estimate a plausible expiration time. The HTTP/1.1
specification does not provide specific algorithms, but does impose specification does not provide specific algorithms, but does impose
worst-case constraints on their results. Since heuristic expiration worst-case constraints on their results. Since heuristic expiration
times might compromise semantic transparency, they ought to used times might compromise semantic transparency, they ought to used
cautiously, and we encourage origin servers to provide explicit cautiously, and we encourage origin servers to provide explicit
expiration times as much as possible. expiration times as much as possible.
13.2.3 Age Calculations 13.2.3. Age Calculations
In order to know if a cached entry is fresh, a cache needs to know if In order to know if a cached entry is fresh, a cache needs to know if
its age exceeds its freshness lifetime. We discuss how to calculate its age exceeds its freshness lifetime. We discuss how to calculate
the latter in section 13.2.4; this section describes how to calculate the latter in Section 13.2.4; this section describes how to calculate
the age of a response or cache entry. the age of a response or cache entry.
In this discussion, we use the term "now" to mean "the current value In this discussion, we use the term "now" to mean "the current value
of the clock at the host performing the calculation." Hosts that use of the clock at the host performing the calculation." Hosts that use
HTTP, but especially hosts running origin servers and caches, SHOULD HTTP, but especially hosts running origin servers and caches, SHOULD
use NTP [28] or some similar protocol to synchronize their clocks to use NTP [RFC1305] or some similar protocol to synchronize their
a globally accurate time standard. clocks to a globally accurate time standard.
HTTP/1.1 requires origin servers to send a Date header, if possible, HTTP/1.1 requires origin servers to send a Date header, if possible,
with every response, giving the time at which the response was with every response, giving the time at which the response was
generated (see section 14.18). We use the term "date_value" to denote generated (see Section 14.18). We use the term "date_value" to
the value of the Date header, in a form appropriate for arithmetic denote the value of the Date header, in a form appropriate for
operations. arithmetic operations.
HTTP/1.1 uses the Age response-header to convey the estimated age of HTTP/1.1 uses the Age response-header to convey the estimated age of
the response message when obtained from a cache. The Age field value the response message when obtained from a cache. The Age field value
is the cache's estimate of the amount of time since the response was is the cache's estimate of the amount of time since the response was
generated or revalidated by the origin server. generated or revalidated by the origin server.
In essence, the Age value is the sum of the time that the response In essence, the Age value is the sum of the time that the response
has been resident in each of the caches along the path from the has been resident in each of the caches along the path from the
origin server, plus the amount of time it has been in transit along origin server, plus the amount of time it has been in transit along
network paths. network paths.
We use the term "age_value" to denote the value of the Age header, in We use the term "age_value" to denote the value of the Age header, in
a form appropriate for arithmetic operations. a form appropriate for arithmetic operations.
A response's age can be calculated in two entirely independent ways: A response's age can be calculated in two entirely independent ways:
1. now minus date_value, if the local clock is reasonably well 1. now minus date_value, if the local clock is reasonably well
synchronized to the origin server's clock. If the result is synchronized to the origin server's clock. If the result is
negative, the result is replaced by zero. negative, the result is replaced by zero.
2. age_value, if all of the caches along the response path 2. age_value, if all of the caches along the response path implement
implement HTTP/1.1. HTTP/1.1.
Given that we have two independent ways to compute the age of a Given that we have two independent ways to compute the age of a
response when it is received, we can combine these as response when it is received, we can combine these as
corrected_received_age = max(now - date_value, age_value) corrected_received_age = max(now - date_value, age_value)
and as long as we have either nearly synchronized clocks or all- and as long as we have either nearly synchronized clocks or all-
HTTP/1.1 paths, one gets a reliable (conservative) result. HTTP/1.1 paths, one gets a reliable (conservative) result.
Because of network-imposed delays, some significant interval might Because of network-imposed delays, some significant interval might
pass between the time that a server generates a response and the time pass between the time that a server generates a response and the time
it is received at the next outbound cache or client. If uncorrected, it is received at the next outbound cache or client. If uncorrected,
this delay could result in improperly low ages. this delay could result in improperly low ages.
Because the request that resulted in the returned Age value must have Because the request that resulted in the returned Age value must have
been initiated prior to that Age value's generation, we can correct been initiated prior to that Age value's generation, we can correct
for delays imposed by the network by recording the time at which the for delays imposed by the network by recording the time at which the
request was initiated. Then, when an Age value is received, it MUST request was initiated. Then, when an Age value is received, it MUST
be interpreted relative to the time the request was initiated, not be interpreted relative to the time the request was initiated, not
the time that the response was received. This algorithm results in the time that the response was received. This algorithm results in
conservative behavior no matter how much delay is experienced. So, we conservative behavior no matter how much delay is experienced. So,
compute: we compute:
corrected_initial_age = corrected_received_age corrected_initial_age = corrected_received_age
+ (now - request_time) + (now - request_time)
where "request_time" is the time (according to the local clock) when where "request_time" is the time (according to the local clock) when
the request that elicited this response was sent. the request that elicited this response was sent.
Summary of age calculation algorithm, when a cache receives a Summary of age calculation algorithm, when a cache receives a
response: response:
skipping to change at page 83, line 8 skipping to change at page 85, line 42
header field in the response with a value equal to the cache entry's header field in the response with a value equal to the cache entry's
current_age. current_age.
The presence of an Age header field in a response implies that a The presence of an Age header field in a response implies that a
response is not first-hand. However, the converse is not true, since response is not first-hand. However, the converse is not true, since
the lack of an Age header field in a response does not imply that the the lack of an Age header field in a response does not imply that the
response is first-hand unless all caches along the request path are response is first-hand unless all caches along the request path are
compliant with HTTP/1.1 (i.e., older HTTP caches did not implement compliant with HTTP/1.1 (i.e., older HTTP caches did not implement
the Age header field). the Age header field).
13.2.4 Expiration Calculations 13.2.4. Expiration Calculations
In order to decide whether a response is fresh or stale, we need to In order to decide whether a response is fresh or stale, we need to
compare its freshness lifetime to its age. The age is calculated as compare its freshness lifetime to its age. The age is calculated as
described in section 13.2.3; this section describes how to calculate described in Section 13.2.3; this section describes how to calculate
the freshness lifetime, and to determine if a response has expired. the freshness lifetime, and to determine if a response has expired.
In the discussion below, the values can be represented in any form In the discussion below, the values can be represented in any form
appropriate for arithmetic operations. appropriate for arithmetic operations.
We use the term "expires_value" to denote the value of the Expires We use the term "expires_value" to denote the value of the Expires
header. We use the term "max_age_value" to denote an appropriate header. We use the term "max_age_value" to denote an appropriate
value of the number of seconds carried by the "max-age" directive of value of the number of seconds carried by the "max-age" directive of
the Cache-Control header in a response (see section 14.9.3). the Cache-Control header in a response (see Section 14.9.3).
The max-age directive takes priority over Expires, so if max-age is The max-age directive takes priority over Expires, so if max-age is
present in a response, the calculation is simply: present in a response, the calculation is simply:
freshness_lifetime = max_age_value freshness_lifetime = max_age_value
Otherwise, if Expires is present in the response, the calculation is: Otherwise, if Expires is present in the response, the calculation is:
freshness_lifetime = expires_value - date_value freshness_lifetime = expires_value - date_value
Note that neither of these calculations is vulnerable to clock skew, Note that neither of these calculations is vulnerable to clock skew,
since all of the information comes from the origin server. since all of the information comes from the origin server.
If none of Expires, Cache-Control: max-age, or Cache-Control: s- If none of Expires, Cache-Control: max-age, or Cache-Control:
maxage (see section 14.9.3) appears in the response, and the response s-maxage (see Section 14.9.3) appears in the response, and the
does not include other restrictions on caching, the cache MAY compute response does not include other restrictions on caching, the cache
a freshness lifetime using a heuristic. The cache MUST attach Warning MAY compute a freshness lifetime using a heuristic. The cache MUST
113 to any response whose age is more than 24 hours if such warning attach Warning 113 to any response whose age is more than 24 hours if
has not already been added. such warning has not already been added.
Also, if the response does have a Last-Modified time, the heuristic Also, if the response does have a Last-Modified time, the heuristic
expiration value SHOULD be no more than some fraction of the interval expiration value SHOULD be no more than some fraction of the interval
since that time. A typical setting of this fraction might be 10%. since that time. A typical setting of this fraction might be 10%.
The calculation to determine if a response has expired is quite The calculation to determine if a response has expired is quite
simple: simple:
response_is_fresh = (freshness_lifetime > current_age) response_is_fresh = (freshness_lifetime > current_age)
13.2.5 Disambiguating Expiration Values 13.2.5. Disambiguating Expiration Values
Because expiration values are assigned optimistically, it is possible Because expiration values are assigned optimistically, it is possible
for two caches to contain fresh values for the same resource that are for two caches to contain fresh values for the same resource that are
different. different.
If a client performing a retrieval receives a non-first-hand response If a client performing a retrieval receives a non-first-hand response
for a request that was already fresh in its own cache, and the Date for a request that was already fresh in its own cache, and the Date
header in its existing cache entry is newer than the Date on the new header in its existing cache entry is newer than the Date on the new
response, then the client MAY ignore the response. If so, it MAY response, then the client MAY ignore the response. If so, it MAY
retry the request with a "Cache-Control: max-age=0" directive (see retry the request with a "Cache-Control: max-age=0" directive (see
section 14.9), to force a check with the origin server. Section 14.9), to force a check with the origin server.
If a cache has two fresh responses for the same representation with If a cache has two fresh responses for the same representation with
different validators, it MUST use the one with the more recent Date different validators, it MUST use the one with the more recent Date
header. This situation might arise because the cache is pooling header. This situation might arise because the cache is pooling
responses from other caches, or because a client has asked for a responses from other caches, or because a client has asked for a
reload or a revalidation of an apparently fresh cache entry. reload or a revalidation of an apparently fresh cache entry.
13.2.6 Disambiguating Multiple Responses 13.2.6. Disambiguating Multiple Responses
Because a client might be receiving responses via multiple paths, so Because a client might be receiving responses via multiple paths, so
that some responses flow through one set of caches and other that some responses flow through one set of caches and other
responses flow through a different set of caches, a client might responses flow through a different set of caches, a client might
receive responses in an order different from that in which the origin receive responses in an order different from that in which the origin
server sent them. We would like the client to use the most recently server sent them. We would like the client to use the most recently
generated response, even if older responses are still apparently generated response, even if older responses are still apparently
fresh. fresh.
Neither the entity tag nor the expiration value can impose an Neither the entity tag nor the expiration value can impose an
ordering on responses, since it is possible that a later response ordering on responses, since it is possible that a later response
intentionally carries an earlier expiration time. The Date values are intentionally carries an earlier expiration time. The Date values
ordered to a granularity of one second. are ordered to a granularity of one second.
When a client tries to revalidate a cache entry, and the response it When a client tries to revalidate a cache entry, and the response it
receives contains a Date header that appears to be older than the one receives contains a Date header that appears to be older than the one
for the existing entry, then the client SHOULD repeat the request for the existing entry, then the client SHOULD repeat the request
unconditionally, and include unconditionally, and include
Cache-Control: max-age=0 Cache-Control: max-age=0
to force any intermediate caches to validate their copies directly to force any intermediate caches to validate their copies directly
with the origin server, or with the origin server, or
skipping to change at page 85, line 11 skipping to change at page 87, line 42
to force any intermediate caches to obtain a new copy from the origin to force any intermediate caches to obtain a new copy from the origin
server. server.
If the Date values are equal, then the client MAY use either response If the Date values are equal, then the client MAY use either response
(or MAY, if it is being extremely prudent, request a new response). (or MAY, if it is being extremely prudent, request a new response).
Servers MUST NOT depend on clients being able to choose Servers MUST NOT depend on clients being able to choose
deterministically between responses generated during the same second, deterministically between responses generated during the same second,
if their expiration times overlap. if their expiration times overlap.
13.3 Validation Model 13.3. Validation Model
When a cache has a stale entry that it would like to use as a When a cache has a stale entry that it would like to use as a
response to a client's request, it first has to check with the origin response to a client's request, it first has to check with the origin
server (or possibly an intermediate cache with a fresh response) to server (or possibly an intermediate cache with a fresh response) to
see if its cached entry is still usable. We call this "validating" see if its cached entry is still usable. We call this "validating"
the cache entry. Since we do not want to have to pay the overhead of the cache entry. Since we do not want to have to pay the overhead of
retransmitting the full response if the cached entry is good, and we retransmitting the full response if the cached entry is good, and we
do not want to pay the overhead of an extra round trip if the cached do not want to pay the overhead of an extra round trip if the cached
entry is invalid, the HTTP/1.1 protocol supports the use of entry is invalid, the HTTP/1.1 protocol supports the use of
conditional methods. conditional methods.
The key protocol features for supporting conditional methods are The key protocol features for supporting conditional methods are
those concerned with "cache validators." When an origin server those concerned with "cache validators." When an origin server
generates a full response, it attaches some sort of validator to it, generates a full response, it attaches some sort of validator to it,
which is kept with the cache entry. When a client (user agent or which is kept with the cache entry. When a client (user agent or
proxy cache) makes a conditional request for a resource for which it proxy cache) makes a conditional request for a resource for which it
has a cache entry, it includes the associated validator in the has a cache entry, it includes the associated validator in the
request. request.
The server then checks that validator against the current validator The server then checks that validator against the current validator
for the entity, and, if they match (see section 13.3.3), it responds for the entity, and, if they match (see Section 13.3.3), it responds
with a special status code (usually, 304 (Not Modified)) and no with a special status code (usually, 304 (Not Modified)) and no
entity-body. Otherwise, it returns a full response (including entity-body. Otherwise, it returns a full response (including
entity-body). Thus, we avoid transmitting the full response if the entity-body). Thus, we avoid transmitting the full response if the
validator matches, and we avoid an extra round trip if it does not validator matches, and we avoid an extra round trip if it does not
match. match.
In HTTP/1.1, a conditional request looks exactly the same as a normal In HTTP/1.1, a conditional request looks exactly the same as a normal
request for the same resource, except that it carries a special request for the same resource, except that it carries a special
header (which includes the validator) that implicitly turns the header (which includes the validator) that implicitly turns the
method (usually, GET) into a conditional. method (usually, GET) into a conditional.
The protocol includes both positive and negative senses of cache- The protocol includes both positive and negative senses of cache-
validating conditions. That is, it is possible to request either that validating conditions. That is, it is possible to request either
a method be performed if and only if a validator matches or if and that a method be performed if and only if a validator matches or if
only if no validators match. and only if no validators match.
Note: a response that lacks a validator may still be cached, and Note: a response that lacks a validator may still be cached, and
served from cache until it expires, unless this is explicitly served from cache until it expires, unless this is explicitly
prohibited by a cache-control directive. However, a cache cannot prohibited by a cache-control directive. However, a cache cannot
do a conditional retrieval if it does not have a validator for the do a conditional retrieval if it does not have a validator for the
entity, which means it will not be refreshable after it expires. entity, which means it will not be refreshable after it expires.
13.3.1 Last-Modified Dates 13.3.1. Last-Modified Dates
The Last-Modified entity-header field value is often used as a cache The Last-Modified entity-header field value is often used as a cache
validator. In simple terms, a cache entry is considered to be valid validator. In simple terms, a cache entry is considered to be valid
if the entity has not been modified since the Last-Modified value. if the entity has not been modified since the Last-Modified value.
13.3.2 Entity Tag Cache Validators 13.3.2. Entity Tag Cache Validators
The ETag response-header field value, an entity tag, provides for an The ETag response-header field value, an entity tag, provides for an
"opaque" cache validator. This might allow more reliable validation "opaque" cache validator. This might allow more reliable validation
in situations where it is inconvenient to store modification dates, in situations where it is inconvenient to store modification dates,
where the one-second resolution of HTTP date values is not where the one-second resolution of HTTP date values is not
sufficient, or where the origin server wishes to avoid certain sufficient, or where the origin server wishes to avoid certain
paradoxes that might arise from the use of modification dates. paradoxes that might arise from the use of modification dates.
Entity Tags are described in section 3.11. The headers used with Entity Tags are described in Section 3.11. The headers used with
entity tags are described in sections 14.19, 14.24, 14.26 and 14.44. entity tags are described in sections 14.19, 14.24, 14.26 and 14.44.
13.3.3 Weak and Strong Validators 13.3.3. Weak and Strong Validators
Since both origin servers and caches will compare two validators to Since both origin servers and caches will compare two validators to
decide if they represent the same or different entities, one normally decide if they represent the same or different entities, one normally
would expect that if the entity (the entity-body or any entity- would expect that if the entity (the entity-body or any entity-
headers) changes in any way, then the associated validator would headers) changes in any way, then the associated validator would
change as well. If this is true, then we call this validator a change as well. If this is true, then we call this validator a
"strong validator." "strong validator."
However, there might be cases when a server prefers to change the However, there might be cases when a server prefers to change the
validator only on semantically significant changes, and not when validator only on semantically significant changes, and not when
insignificant aspects of the entity change. A validator that does not insignificant aspects of the entity change. A validator that does
always change when the resource changes is a "weak validator." not always change when the resource changes is a "weak validator."
Entity tags are normally "strong validators," but the protocol Entity tags are normally "strong validators," but the protocol
provides a mechanism to tag an entity tag as "weak." One can think of provides a mechanism to tag an entity tag as "weak." One can think
a strong validator as one that changes whenever the bits of an entity of a strong validator as one that changes whenever the bits of an
changes, while a weak value changes whenever the meaning of an entity entity changes, while a weak value changes whenever the meaning of an
changes. Alternatively, one can think of a strong validator as part entity changes. Alternatively, one can think of a strong validator
of an identifier for a specific entity, while a weak validator is as part of an identifier for a specific entity, while a weak
part of an identifier for a set of semantically equivalent entities. validator is part of an identifier for a set of semantically
equivalent entities.
Note: One example of a strong validator is an integer that is Note: One example of a strong validator is an integer that is
incremented in stable storage every time an entity is changed. incremented in stable storage every time an entity is changed.
An entity's modification time, if represented with one-second An entity's modification time, if represented with one-second
resolution, could be a weak validator, since it is possible that resolution, could be a weak validator, since it is possible that
the resource might be modified twice during a single second. the resource might be modified twice during a single second.
Support for weak validators is optional. However, weak validators Support for weak validators is optional. However, weak validators
allow for more efficient caching of equivalent objects; for allow for more efficient caching of equivalent objects; for
example, a hit counter on a site is probably good enough if it is example, a hit counter on a site is probably good enough if it is
updated every few days or weeks, and any value during that period updated every few days or weeks, and any value during that period
is likely "good enough" to be equivalent. is likely "good enough" to be equivalent.
A "use" of a validator is either when a client generates a request A "use" of a validator is either when a client generates a request
and includes the validator in a validating header field, or when a and includes the validator in a validating header field, or when a
server compares two validators. server compares two validators.
Strong validators are usable in any context. Weak validators are only Strong validators are usable in any context. Weak validators are
usable in contexts that do not depend on exact equality of an entity. only usable in contexts that do not depend on exact equality of an
For example, either kind is usable for a conditional GET of a full entity. For example, either kind is usable for a conditional GET of
entity. However, only a strong validator is usable for a sub-range a full entity. However, only a strong validator is usable for a sub-
retrieval, since otherwise the client might end up with an internally range retrieval, since otherwise the client might end up with an
inconsistent entity. internally inconsistent entity.
Clients MAY issue simple (non-subrange) GET requests with either weak Clients MAY issue simple (non-subrange) GET requests with either weak
validators or strong validators. Clients MUST NOT use weak validators validators or strong validators. Clients MUST NOT use weak
in other forms of request. validators in other forms of request.
The only function that the HTTP/1.1 protocol defines on validators is The only function that the HTTP/1.1 protocol defines on validators is
comparison. There are two validator comparison functions, depending comparison. There are two validator comparison functions, depending
on whether the comparison context allows the use of weak validators on whether the comparison context allows the use of weak validators
or not: or not:
- The strong comparison function: in order to be considered equal, o The strong comparison function: in order to be considered equal,
both validators MUST be identical in every way, and both MUST both validators MUST be identical in every way, and both MUST NOT
NOT be weak. be weak.
- The weak comparison function: in order to be considered equal, o The weak comparison function: in order to be considered equal,
both validators MUST be identical in every way, but either or both validators MUST be identical in every way, but either or both
both of them MAY be tagged as "weak" without affecting the of them MAY be tagged as "weak" without affecting the result.
result.
An entity tag is strong unless it is explicitly tagged as weak. An entity tag is strong unless it is explicitly tagged as weak.
Section 3.11 gives the syntax for entity tags. Section 3.11 gives the syntax for entity tags.
A Last-Modified time, when used as a validator in a request, is A Last-Modified time, when used as a validator in a request, is
implicitly weak unless it is possible to deduce that it is strong, implicitly weak unless it is possible to deduce that it is strong,
using the following rules: using the following rules:
- The validator is being compared by an origin server to the o The validator is being compared by an origin server to the actual
actual current validator for the entity and, current validator for the entity and,
- That origin server reliably knows that the associated entity did
o That origin server reliably knows that the associated entity did
not change twice during the second covered by the presented not change twice during the second covered by the presented
validator. validator.
or or
- The validator is about to be used by a client in an If- o The validator is about to be used by a client in an If-Modified-
Modified-Since or If-Unmodified-Since header, because the client Since or If-Unmodified-Since header, because the client has a
has a cache entry for the associated entity, and cache entry for the associated entity, and
- That cache entry includes a Date value, which gives the time o That cache entry includes a Date value, which gives the time when
when the origin server sent the original response, and the origin server sent the original response, and
- The presented Last-Modified time is at least 60 seconds before o The presented Last-Modified time is at least 60 seconds before the
the Date value. Date value.
or or
o The validator is being compared by an intermediate cache to the
- The validator is being compared by an intermediate cache to the
validator stored in its cache entry for the entity, and validator stored in its cache entry for the entity, and
- That cache entry includes a Date value, which gives the time o That cache entry includes a Date value, which gives the time when
when the origin server sent the original response, and the origin server sent the original response, and
- The presented Last-Modified time is at least 60 seconds before o The presented Last-Modified time is at least 60 seconds before the
the Date value. Date value.
This method relies on the fact that if two different responses were This method relies on the fact that if two different responses were
sent by the origin server during the same second, but both had the sent by the origin server during the same second, but both had the
same Last-Modified time, then at least one of those responses would same Last-Modified time, then at least one of those responses would
have a Date value equal to its Last-Modified time. The arbitrary 60- have a Date value equal to its Last-Modified time. The arbitrary 60-
second limit guards against the possibility that the Date and Last- second limit guards against the possibility that the Date and Last-
Modified values are generated from different clocks, or at somewhat Modified values are generated from different clocks, or at somewhat
different times during the preparation of the response. An different times during the preparation of the response. An
implementation MAY use a value larger than 60 seconds, if it is implementation MAY use a value larger than 60 seconds, if it is
believed that 60 seconds is too short. believed that 60 seconds is too short.
skipping to change at page 89, line 6 skipping to change at page 91, line 36
described here. described here.
A cache or origin server receiving a conditional request, other than A cache or origin server receiving a conditional request, other than
a full-body GET request, MUST use the strong comparison function to a full-body GET request, MUST use the strong comparison function to
evaluate the condition. evaluate the condition.
These rules allow HTTP/1.1 caches and clients to safely perform sub- These rules allow HTTP/1.1 caches and clients to safely perform sub-
range retrievals on values that have been obtained from HTTP/1.0 range retrievals on values that have been obtained from HTTP/1.0
servers. servers.
13.3.4 Rules for When to Use Entity Tags and Last-Modified Dates 13.3.4. Rules for When to Use Entity Tags and Last-Modified Dates
We adopt a set of rules and recommendations for origin servers, We adopt a set of rules and recommendations for origin servers,
clients, and caches regarding when various validator types ought to clients, and caches regarding when various validator types ought to
be used, and for what purposes. be used, and for what purposes.
HTTP/1.1 origin servers: HTTP/1.1 origin servers:
- SHOULD send an entity tag validator unless it is not feasible to o SHOULD send an entity tag validator unless it is not feasible to
generate one. generate one.
- MAY send a weak entity tag instead of a strong entity tag, if o MAY send a weak entity tag instead of a strong entity tag, if
performance considerations support the use of weak entity tags, performance considerations support the use of weak entity tags, or
or if it is unfeasible to send a strong entity tag. if it is unfeasible to send a strong entity tag.
- SHOULD send a Last-Modified value if it is feasible to send one, o SHOULD send a Last-Modified value if it is feasible to send one,
unless the risk of a breakdown in semantic transparency that unless the risk of a breakdown in semantic transparency that could
could result from using this date in an If-Modified-Since header result from using this date in an If-Modified-Since header would
would lead to serious problems. lead to serious problems.
In other words, the preferred behavior for an HTTP/1.1 origin server In other words, the preferred behavior for an HTTP/1.1 origin server
is to send both a strong entity tag and a Last-Modified value. is to send both a strong entity tag and a Last-Modified value.
In order to be legal, a strong entity tag MUST change whenever the In order to be legal, a strong entity tag MUST change whenever the
associated entity value changes in any way. A weak entity tag SHOULD associated entity value changes in any way. A weak entity tag SHOULD
change whenever the associated entity changes in a semantically change whenever the associated entity changes in a semantically
significant way. significant way.
Note: in order to provide semantically transparent caching, an Note: in order to provide semantically transparent caching, an
origin server must avoid reusing a specific strong entity tag origin server must avoid reusing a specific strong entity tag
value for two different entities, or reusing a specific weak value for two different entities, or reusing a specific weak
entity tag value for two semantically different entities. Cache entity tag value for two semantically different entities. Cache
entries might persist for arbitrarily long periods, regardless of entries might persist for arbitrarily long periods, regardless of
expiration times, so it might be inappropriate to expect that a expiration times, so it might be inappropriate to expect that a
cache will never again attempt to validate an entry using a cache will never again attempt to validate an entry using a
validator that it obtained at some point in the past. validator that it obtained at some point in the past.
HTTP/1.1 clients: HTTP/1.1 clients:
- If an entity tag has been provided by the origin server, MUST o If an entity tag has been provided by the origin server, MUST use
use that entity tag in any cache-conditional request (using If- that entity tag in any cache-conditional request (using If-Match
Match or If-None-Match). or If-None-Match).
- If only a Last-Modified value has been provided by the origin o If only a Last-Modified value has been provided by the origin
server, SHOULD use that value in non-subrange cache-conditional server, SHOULD use that value in non-subrange cache-conditional
requests (using If-Modified-Since). requests (using If-Modified-Since).
- If only a Last-Modified value has been provided by an HTTP/1.0 o If only a Last-Modified value has been provided by an HTTP/1.0
origin server, MAY use that value in subrange cache-conditional origin server, MAY use that value in subrange cache-conditional
requests (using If-Unmodified-Since:). The user agent SHOULD requests (using If-Unmodified-Since:). The user agent SHOULD
provide a way to disable this, in case of difficulty. provide a way to disable this, in case of difficulty.
- If both an entity tag and a Last-Modified value have been o If both an entity tag and a Last-Modified value have been provided
provided by the origin server, SHOULD use both validators in by the origin server, SHOULD use both validators in cache-
cache-conditional requests. This allows both HTTP/1.0 and conditional requests. This allows both HTTP/1.0 and HTTP/1.1
HTTP/1.1 caches to respond appropriately. caches to respond appropriately.
An HTTP/1.1 origin server, upon receiving a conditional request that An HTTP/1.1 origin server, upon receiving a conditional request that
includes both a Last-Modified date (e.g., in an If-Modified-Since or includes both a Last-Modified date (e.g., in an If-Modified-Since or
If-Unmodified-Since header field) and one or more entity tags (e.g., If-Unmodified-Since header field) and one or more entity tags (e.g.,
in an If-Match, If-None-Match, or If-Range header field) as cache in an If-Match, If-None-Match, or If-Range header field) as cache
validators, MUST NOT return a response status of 304 (Not Modified) validators, MUST NOT return a response status of 304 (Not Modified)
unless doing so is consistent with all of the conditional header unless doing so is consistent with all of the conditional header
fields in the request. fields in the request.
An HTTP/1.1 caching proxy, upon receiving a conditional request that An HTTP/1.1 caching proxy, upon receiving a conditional request that
skipping to change at page 90, line 43 skipping to change at page 93, line 26
conservative assumptions about the validators they receive. conservative assumptions about the validators they receive.
HTTP/1.0 clients and caches will ignore entity tags. Generally, HTTP/1.0 clients and caches will ignore entity tags. Generally,
last-modified values received or used by these systems will last-modified values received or used by these systems will
support transparent and efficient caching, and so HTTP/1.1 origin support transparent and efficient caching, and so HTTP/1.1 origin
servers should provide Last-Modified values. In those rare cases servers should provide Last-Modified values. In those rare cases
where the use of a Last-Modified value as a validator by an where the use of a Last-Modified value as a validator by an
HTTP/1.0 system could result in a serious problem, then HTTP/1.1 HTTP/1.0 system could result in a serious problem, then HTTP/1.1
origin servers should not provide one. origin servers should not provide one.
13.3.5 Non-validating Conditionals 13.3.5. Non-validating Conditionals
The principle behind entity tags is that only the service author The principle behind entity tags is that only the service author
knows the semantics of a resource well enough to select an knows the semantics of a resource well enough to select an
appropriate cache validation mechanism, and the specification of any appropriate cache validation mechanism, and the specification of any
validator comparison function more complex than byte-equality would validator comparison function more complex than byte-equality would
open up a can of worms. Thus, comparisons of any other headers open up a can of worms. Thus, comparisons of any other headers
(except Last-Modified, for compatibility with HTTP/1.0) are never (except Last-Modified, for compatibility with HTTP/1.0) are never
used for purposes of validating a cache entry. used for purposes of validating a cache entry.
13.4 Response Cacheability 13.4. Response Cacheability
Unless specifically constrained by a cache-control (section 14.9) Unless specifically constrained by a cache-control (Section 14.9)
directive, a caching system MAY always store a successful response directive, a caching system MAY always store a successful response
(see section 13.8) as a cache entry, MAY return it without validation (see Section 13.8) as a cache entry, MAY return it without validation
if it is fresh, and MAY return it after successful validation. If if it is fresh, and MAY return it after successful validation. If
there is neither a cache validator nor an explicit expiration time there is neither a cache validator nor an explicit expiration time
associated with a response, we do not expect it to be cached, but associated with a response, we do not expect it to be cached, but
certain caches MAY violate this expectation (for example, when little certain caches MAY violate this expectation (for example, when little
or no network connectivity is available). A client can usually detect or no network connectivity is available). A client can usually
that such a response was taken from a cache by comparing the Date detect that such a response was taken from a cache by comparing the
header to the current time. Date header to the current time.
Note: some HTTP/1.0 caches are known to violate this expectation Note: some HTTP/1.0 caches are known to violate this expectation
without providing any Warning. without providing any Warning.
However, in some cases it might be inappropriate for a cache to However, in some cases it might be inappropriate for a cache to
retain an entity, or to return it in response to a subsequent retain an entity, or to return it in response to a subsequent
request. This might be because absolute semantic transparency is request. This might be because absolute semantic transparency is
deemed necessary by the service author, or because of security or deemed necessary by the service author, or because of security or
privacy considerations. Certain cache-control directives are privacy considerations. Certain cache-control directives are
therefore provided so that the server can indicate that certain therefore provided so that the server can indicate that certain
resource entities, or portions thereof, are not to be cached resource entities, or portions thereof, are not to be cached
regardless of other considerations. regardless of other considerations.
Note that section 14.8 normally prevents a shared cache from saving Note that Section 14.8 normally prevents a shared cache from saving
and returning a response to a previous request if that request and returning a response to a previous request if that request
included an Authorization header. included an Authorization header.
A response received with a status code of 200, 203, 206, 300, 301 or A response received with a status code of 200, 203, 206, 300, 301 or
410 MAY be stored by a cache and used in reply to a subsequent 410 MAY be stored by a cache and used in reply to a subsequent
request, subject to the expiration mechanism, unless a cache-control request, subject to the expiration mechanism, unless a cache-control
directive prohibits caching. However, a cache that does not support directive prohibits caching. However, a cache that does not support
the Range and Content-Range headers MUST NOT cache 206 (Partial the Range and Content-Range headers MUST NOT cache 206 (Partial
Content) responses. Content) responses.
A response received with any other status code (e.g. status codes 302 A response received with any other status code (e.g. status codes 302
and 307) MUST NOT be returned in a reply to a subsequent request and 307) MUST NOT be returned in a reply to a subsequent request
unless there are cache-control directives or another header(s) that unless there are cache-control directives or another header(s) that
explicitly allow it. For example, these include the following: an explicitly allow it. For example, these include the following: an
Expires header (section 14.21); a "max-age", "s-maxage", "must- Expires header (Section 14.21); a "max-age", "s-maxage", "must-
revalidate", "proxy-revalidate", "public" or "private" cache-control revalidate", "proxy-revalidate", "public" or "private" cache-control
directive (section 14.9). directive (Section 14.9).
13.5 Constructing Responses From Caches 13.5. Constructing Responses From Caches
The purpose of an HTTP cache is to store information received in The purpose of an HTTP cache is to store information received in
response to requests for use in responding to future requests. In response to requests for use in responding to future requests. In
many cases, a cache simply returns the appropriate parts of a many cases, a cache simply returns the appropriate parts of a
response to the requester. However, if the cache holds a cache entry response to the requester. However, if the cache holds a cache entry
based on a previous response, it might have to combine parts of a new based on a previous response, it might have to combine parts of a new
response with what is held in the cache entry. response with what is held in the cache entry.
13.5.1 End-to-end and Hop-by-hop Headers 13.5.1. End-to-end and Hop-by-hop Headers
For the purpose of defining the behavior of caches and non-caching For the purpose of defining the behavior of caches and non-caching
proxies, we divide HTTP headers into two categories: proxies, we divide HTTP headers into two categories:
- End-to-end headers, which are transmitted to the ultimate o End-to-end headers, which are transmitted to the ultimate
recipient of a request or response. End-to-end headers in recipient of a request or response. End-to-end headers in
responses MUST be stored as part of a cache entry and MUST be responses MUST be stored as part of a cache entry and MUST be
transmitted in any response formed from a cache entry. transmitted in any response formed from a cache entry.
- Hop-by-hop headers, which are meaningful only for a single o Hop-by-hop headers, which are meaningful only for a single
transport-level connection, and are not stored by caches or transport-level connection, and are not stored by caches or
forwarded by proxies. forwarded by proxies.
The following HTTP/1.1 headers are hop-by-hop headers: The following HTTP/1.1 headers are hop-by-hop headers:
- Connection o Connection
- Keep-Alive
- Proxy-Authenticate o Keep-Alive
- Proxy-Authorization
- TE o Proxy-Authenticate
- Trailers
- Transfer-Encoding o Proxy-Authorization
- Upgrade
o TE
o Trailers
o Transfer-Encoding
o Upgrade
All other headers defined by HTTP/1.1 are end-to-end headers. All other headers defined by HTTP/1.1 are end-to-end headers.
Other hop-by-hop headers MUST be listed in a Connection header, Other hop-by-hop headers MUST be listed in a Connection header,
(section 14.10) to be introduced into HTTP/1.1 (or later). (Section 14.10) to be introduced into HTTP/1.1 (or later).
13.5.2 Non-modifiable Headers 13.5.2. Non-modifiable Headers
Some features of the HTTP/1.1 protocol, such as Digest Some features of the HTTP/1.1 protocol, such as Digest
Authentication, depend on the value of certain end-to-end headers. A Authentication, depend on the value of certain end-to-end headers. A
transparent proxy SHOULD NOT modify an end-to-end header unless the transparent proxy SHOULD NOT modify an end-to-end header unless the
definition of that header requires or specifically allows that. definition of that header requires or specifically allows that.
A transparent proxy MUST NOT modify any of the following fields in a A transparent proxy MUST NOT modify any of the following fields in a
request or response, and it MUST NOT add any of these fields if not request or response, and it MUST NOT add any of these fields if not
already present: already present:
- Content-Location o Content-Location
- Content-MD5 o Content-MD5
- ETag o ETag
- Last-Modified o Last-Modified
A transparent proxy MUST NOT modify any of the following fields in a A transparent proxy MUST NOT modify any of the following fields in a
response: response:
- Expires o Expires
but it MAY add any of these fields if not already present. If an but it MAY add any of these fields if not already present. If an
Expires header is added, it MUST be given a field-value identical to Expires header is added, it MUST be given a field-value identical to
that of the Date header in that response. that of the Date header in that response.
A proxy MUST NOT modify or add any of the following fields in a A proxy MUST NOT modify or add any of the following fields in a
message that contains the no-transform cache-control directive, or in message that contains the no-transform cache-control directive, or in
any request: any request:
- Content-Encoding o Content-Encoding
- Content-Range o Content-Range
- Content-Type o Content-Type
A non-transparent proxy MAY modify or add these fields to a message A non-transparent proxy MAY modify or add these fields to a message
that does not include no-transform, but if it does so, it MUST add a that does not include no-transform, but if it does so, it MUST add a
Warning 214 (Transformation applied) if one does not already appear Warning 214 (Transformation applied) if one does not already appear
in the message (see section 14.46). in the message (see Section 14.46).
Warning: unnecessary modification of end-to-end headers might Warning: unnecessary modification of end-to-end headers might
cause authentication failures if stronger authentication cause authentication failures if stronger authentication
mechanisms are introduced in later versions of HTTP. Such mechanisms are introduced in later versions of HTTP. Such
authentication mechanisms MAY rely on the values of header fields authentication mechanisms MAY rely on the values of header fields
not listed here. not listed here.
The Content-Length field of a request or response is added or deleted The Content-Length field of a request or response is added or deleted
according to the rules in section 4.4. A transparent proxy MUST according to the rules in Section 4.4. A transparent proxy MUST
preserve the entity-length (section 7.2.2) of the entity-body, preserve the entity-length (Section 7.2.2) of the entity-body,
although it MAY change the transfer-length (section 4.4). although it MAY change the transfer-length (Section 4.4).
13.5.3 Combining Headers 13.5.3. Combining Headers
When a cache makes a validating request to a server, and the server When a cache makes a validating request to a server, and the server
provides a 304 (Not Modified) response or a 206 (Partial Content) provides a 304 (Not Modified) response or a 206 (Partial Content)
response, the cache then constructs a response to send to the response, the cache then constructs a response to send to the
requesting client. requesting client.
If the status code is 304 (Not Modified), the cache uses the entity- If the status code is 304 (Not Modified), the cache uses the entity-
body stored in the cache entry as the entity-body of this outgoing body stored in the cache entry as the entity-body of this outgoing
response. If the status code is 206 (Partial Content) and the ETag or response. If the status code is 206 (Partial Content) and the ETag
Last-Modified headers match exactly, the cache MAY combine the or Last-Modified headers match exactly, the cache MAY combine the
contents stored in the cache entry with the new contents received in contents stored in the cache entry with the new contents received in
the response and use the result as the entity-body of this outgoing the response and use the result as the entity-body of this outgoing
response, (see 13.5.4). response, (see 13.5.4).
The end-to-end headers stored in the cache entry are used for the The end-to-end headers stored in the cache entry are used for the
constructed response, except that constructed response, except that
- any stored Warning headers with warn-code 1xx (see section o any stored Warning headers with warn-code 1xx (see Section 14.46)
14.46) MUST be deleted from the cache entry and the forwarded MUST be deleted from the cache entry and the forwarded response.
response.
- any stored Warning headers with warn-code 2xx MUST be retained o any stored Warning headers with warn-code 2xx MUST be retained in
in the cache entry and the forwarded response. the cache entry and the forwarded response.
- any end-to-end headers provided in the 304 or 206 response MUST o any end-to-end headers provided in the 304 or 206 response MUST
replace the corresponding headers from the cache entry. replace the corresponding headers from the cache entry.
Unless the cache decides to remove the cache entry, it MUST also Unless the cache decides to remove the cache entry, it MUST also
replace the end-to-end headers stored with the cache entry with replace the end-to-end headers stored with the cache entry with
corresponding headers received in the incoming response, except for corresponding headers received in the incoming response, except for
Warning headers as described immediately above. If a header field- Warning headers as described immediately above. If a header field-
name in the incoming response matches more than one header in the name in the incoming response matches more than one header in the
cache entry, all such old headers MUST be replaced. cache entry, all such old headers MUST be replaced.
In other words, the set of end-to-end headers received in the In other words, the set of end-to-end headers received in the
incoming response overrides all corresponding end-to-end headers incoming response overrides all corresponding end-to-end headers
stored with the cache entry (except for stored Warning headers with stored with the cache entry (except for stored Warning headers with
warn-code 1xx, which are deleted even if not overridden). warn-code 1xx, which are deleted even if not overridden).
Note: this rule allows an origin server to use a 304 (Not Note: this rule allows an origin server to use a 304 (Not
Modified) or a 206 (Partial Content) response to update any header Modified) or a 206 (Partial Content) response to update any header
associated with a previous response for the same entity or sub- associated with a previous response for the same entity or sub-
ranges thereof, although it might not always be meaningful or ranges thereof, although it might not always be meaningful or
correct to do so. This rule does not allow an origin server to use correct to do so. This rule does not allow an origin server to
a 304 (Not Modified) or a 206 (Partial Content) response to use a 304 (Not Modified) or a 206 (Partial Content) response to
entirely delete a header that it had provided with a previous entirely delete a header that it had provided with a previous
response. response.
13.5.4 Combining Byte Ranges 13.5.4. Combining Byte Ranges
A response might transfer only a subrange of the bytes of an entity- A response might transfer only a subrange of the bytes of an entity-
body, either because the request included one or more Range body, either because the request included one or more Range
specifications, or because a connection was broken prematurely. After specifications, or because a connection was broken prematurely.
several such transfers, a cache might have received several ranges of After several such transfers, a cache might have received several
the same entity-body. ranges of the same entity-body.
If a cache has a stored non-empty set of subranges for an entity, and If a cache has a stored non-empty set of subranges for an entity, and
an incoming response transfers another subrange, the cache MAY an incoming response transfers another subrange, the cache MAY
combine the new subrange with the existing set if both the following combine the new subrange with the existing set if both the following
conditions are met: conditions are met:
- Both the incoming response and the cache entry have a cache o Both the incoming response and the cache entry have a cache
validator. validator.
- The two cache validators match using the strong comparison o The two cache validators match using the strong comparison
function (see section 13.3.3). function (see Section 13.3.3).
If either requirement is not met, the cache MUST use only the most If either requirement is not met, the cache MUST use only the most
recent partial response (based on the Date values transmitted with recent partial response (based on the Date values transmitted with
every response, and using the incoming response if these values are every response, and using the incoming response if these values are
equal or missing), and MUST discard the other partial information. equal or missing), and MUST discard the other partial information.
13.6 Caching Negotiated Responses 13.6. Caching Negotiated Responses
Use of server-driven content negotiation (section 12.1), as indicated Use of server-driven content negotiation (Section 12.1), as indicated
by the presence of a Vary header field in a response, alters the by the presence of a Vary header field in a response, alters the
conditions and procedure by which a cache can use the response for conditions and procedure by which a cache can use the response for
subsequent requests. See section 14.44 for use of the Vary header subsequent requests. See Section 14.44 for use of the Vary header
field by servers. field by servers.
A server SHOULD use the Vary header field to inform a cache of what A server SHOULD use the Vary header field to inform a cache of what
request-header fields were used to select among multiple request-header fields were used to select among multiple
representations of a cacheable response subject to server-driven representations of a cacheable response subject to server-driven
negotiation. The set of header fields named by the Vary field value negotiation. The set of header fields named by the Vary field value
is known as the "selecting" request-headers. is known as the "selecting" request-headers.
When the cache receives a subsequent request whose Request-URI When the cache receives a subsequent request whose Request-URI
specifies one or more cache entries including a Vary header field, specifies one or more cache entries including a Vary header field,
skipping to change at page 96, line 7 skipping to change at page 98, line 40
the new request unless all of the selecting request-headers present the new request unless all of the selecting request-headers present
in the new request match the corresponding stored request-headers in in the new request match the corresponding stored request-headers in
the original request. the original request.
The selecting request-headers from two requests are defined to match The selecting request-headers from two requests are defined to match
if and only if the selecting request-headers in the first request can if and only if the selecting request-headers in the first request can
be transformed to the selecting request-headers in the second request be transformed to the selecting request-headers in the second request
by adding or removing linear white space (LWS) at places where this by adding or removing linear white space (LWS) at places where this
is allowed by the corresponding BNF, and/or combining multiple is allowed by the corresponding BNF, and/or combining multiple
message-header fields with the same field name following the rules message-header fields with the same field name following the rules
about message headers in section 4.2. about message headers in Section 4.2.
A Vary header field-value of "*" always fails to match and subsequent A Vary header field-value of "*" always fails to match and subsequent
requests on that resource can only be properly interpreted by the requests on that resource can only be properly interpreted by the
origin server. origin server.
If the selecting request header fields for the cached entry do not If the selecting request header fields for the cached entry do not
match the selecting request header fields of the new request, then match the selecting request header fields of the new request, then
the cache MUST NOT use a cached entry to satisfy the request unless the cache MUST NOT use a cached entry to satisfy the request unless
it first relays the new request to the origin server in a conditional it first relays the new request to the origin server in a conditional
request and the server responds with 304 (Not Modified), including an request and the server responds with 304 (Not Modified), including an
skipping to change at page 96, line 38 skipping to change at page 99, line 23
entry, the new response SHOULD be used to update the header fields of entry, the new response SHOULD be used to update the header fields of
the existing entry, and the result MUST be returned to the client. the existing entry, and the result MUST be returned to the client.
If any of the existing cache entries contains only partial content If any of the existing cache entries contains only partial content
for the associated entity, its entity-tag SHOULD NOT be included in for the associated entity, its entity-tag SHOULD NOT be included in
the If-None-Match header field unless the request is for a range that the If-None-Match header field unless the request is for a range that
would be fully satisfied by that entry. would be fully satisfied by that entry.
If a cache receives a successful response whose Content-Location If a cache receives a successful response whose Content-Location
field matches that of an existing cache entry for the same Request- field matches that of an existing cache entry for the same Request-
]URI, whose entity-tag differs from that of the existing entry, and URI, whose entity-tag differs from that of the existing entry, and
whose Date is more recent than that of the existing entry, the whose Date is more recent than that of the existing entry, the
existing entry SHOULD NOT be returned in response to future requests existing entry SHOULD NOT be returned in response to future requests
and SHOULD be deleted from the cache. and SHOULD be deleted from the cache.
13.7 Shared and Non-Shared Caches 13.7. Shared and Non-Shared Caches
For reasons of security and privacy, it is necessary to make a For reasons of security and privacy, it is necessary to make a
distinction between "shared" and "non-shared" caches. A non-shared distinction between "shared" and "non-shared" caches. A non-shared
cache is one that is accessible only to a single user. Accessibility cache is one that is accessible only to a single user. Accessibility
in this case SHOULD be enforced by appropriate security mechanisms. in this case SHOULD be enforced by appropriate security mechanisms.
All other caches are considered to be "shared." Other sections of All other caches are considered to be "shared." Other sections of
this specification place certain constraints on the operation of this specification place certain constraints on the operation of
shared caches in order to prevent loss of privacy or failure of shared caches in order to prevent loss of privacy or failure of
access controls. access controls.
13.8 Errors or Incomplete Response Cache Behavior 13.8. Errors or Incomplete Response Cache Behavior
A cache that receives an incomplete response (for example, with fewer A cache that receives an incomplete response (for example, with fewer
bytes of data than specified in a Content-Length header) MAY store bytes of data than specified in a Content-Length header) MAY store
the response. However, the cache MUST treat this as a partial the response. However, the cache MUST treat this as a partial
response. Partial responses MAY be combined as described in section response. Partial responses MAY be combined as described in
13.5.4; the result might be a full response or might still be Section 13.5.4; the result might be a full response or might still be
partial. A cache MUST NOT return a partial response to a client partial. A cache MUST NOT return a partial response to a client
without explicitly marking it as such, using the 206 (Partial without explicitly marking it as such, using the 206 (Partial
Content) status code. A cache MUST NOT return a partial response Content) status code. A cache MUST NOT return a partial response
using a status code of 200 (OK). using a status code of 200 (OK).
If a cache receives a 5xx response while attempting to revalidate an If a cache receives a 5xx response while attempting to revalidate an
entry, it MAY either forward this response to the requesting client, entry, it MAY either forward this response to the requesting client,
or act as if the server failed to respond. In the latter case, it MAY or act as if the server failed to respond. In the latter case, it
return a previously received response unless the cached entry MAY return a previously received response unless the cached entry
includes the "must-revalidate" cache-control directive (see section includes the "must-revalidate" cache-control directive (see
14.9). Section 14.9).
13.9 Side Effects of GET and HEAD 13.9. Side Effects of GET and HEAD
Unless the origin server explicitly prohibits the caching of their Unless the origin server explicitly prohibits the caching of their
responses, the application of GET and HEAD methods to any resources responses, the application of GET and HEAD methods to any resources
SHOULD NOT have side effects that would lead to erroneous behavior if SHOULD NOT have side effects that would lead to erroneous behavior if
these responses are taken from a cache. They MAY still have side these responses are taken from a cache. They MAY still have side
effects, but a cache is not required to consider such side effects in effects, but a cache is not required to consider such side effects in
its caching decisions. Caches are always expected to observe an its caching decisions. Caches are always expected to observe an
origin server's explicit restrictions on caching. origin server's explicit restrictions on caching.
We note one exception to this rule: since some applications have We note one exception to this rule: since some applications have
traditionally used GETs and HEADs with query URLs (those containing a traditionally used GETs and HEADs with query URLs (those containing a
"?" in the rel_path part) to perform operations with significant side "?" in the rel_path part) to perform operations with significant side
effects, caches MUST NOT treat responses to such URIs as fresh unless effects, caches MUST NOT treat responses to such URIs as fresh unless
the server provides an explicit expiration time. This specifically the server provides an explicit expiration time. This specifically
means that responses from HTTP/1.0 servers for such URIs SHOULD NOT means that responses from HTTP/1.0 servers for such URIs SHOULD NOT
be taken from a cache. See section 9.1.1 for related information. be taken from a cache. See Section 9.1.1 for related information.
13.10 Invalidation After Updates or Deletions 13.10. Invalidation After Updates or Deletions
The effect of certain methods performed on a resource at the origin The effect of certain methods performed on a resource at the origin
server might cause one or more existing cache entries to become non- server might cause one or more existing cache entries to become non-
transparently invalid. That is, although they might continue to be transparently invalid. That is, although they might continue to be
"fresh," they do not accurately reflect what the origin server would "fresh," they do not accurately reflect what the origin server would
return for a new request on that resource. return for a new request on that resource.
There is no way for the HTTP protocol to guarantee that all such There is no way for the HTTP protocol to guarantee that all such
cache entries are marked invalid. For example, the request that cache entries are marked invalid. For example, the request that
caused the change at the origin server might not have gone through caused the change at the origin server might not have gone through
the proxy where a cache entry is stored. However, several rules help the proxy where a cache entry is stored. However, several rules help
reduce the likelihood of erroneous behavior. reduce the likelihood of erroneous behavior.
In this section, the phrase "invalidate an entity" means that the In this section, the phrase "invalidate an entity" means that the
cache will either remove all instances of that entity from its cache will either remove all instances of that entity from its
storage, or will mark these as "invalid" and in need of a mandatory storage, or will mark these as "invalid" and in need of a mandatory
revalidation before they can be returned in response to a subsequent revalidation before they can be returned in response to a subsequent
request. request.
Some HTTP methods MUST cause a cache to invalidate an entity. This is Some HTTP methods MUST cause a cache to invalidate an entity. This
either the entity referred to by the Request-URI, or by the Location is either the entity referred to by the Request-URI, or by the
or Content-Location headers (if present). These methods are: Location or Content-Location headers (if present). These methods
are:
- PUT o PUT
- DELETE o DELETE
- POST o POST
In order to prevent denial of service attacks, an invalidation based In order to prevent denial of service attacks, an invalidation based
on the URI in a Location or Content-Location header MUST only be on the URI in a Location or Content-Location header MUST only be
performed if the host part is the same as in the Request-URI. performed if the host part is the same as in the Request-URI.
A cache that passes through requests for methods it does not A cache that passes through requests for methods it does not
understand SHOULD invalidate any entities referred to by the understand SHOULD invalidate any entities referred to by the Request-
Request-URI. URI.
13.11 Write-Through Mandatory 13.11. Write-Through Mandatory
All methods that might be expected to cause modifications to the All methods that might be expected to cause modifications to the
origin server's resources MUST be written through to the origin origin server's resources MUST be written through to the origin
server. This currently includes all methods except for GET and HEAD. server. This currently includes all methods except for GET and HEAD.
A cache MUST NOT reply to such a request from a client before having A cache MUST NOT reply to such a request from a client before having
transmitted the request to the inbound server, and having received a transmitted the request to the inbound server, and having received a
corresponding response from the inbound server. This does not prevent corresponding response from the inbound server. This does not
a proxy cache from sending a 100 (Continue) response before the prevent a proxy cache from sending a 100 (Continue) response before
inbound server has sent its final reply. the inbound server has sent its final reply.
The alternative (known as "write-back" or "copy-back" caching) is not The alternative (known as "write-back" or "copy-back" caching) is not
allowed in HTTP/1.1, due to the difficulty of providing consistent allowed in HTTP/1.1, due to the difficulty of providing consistent
updates and the problems arising from server, cache, or network updates and the problems arising from server, cache, or network
failure prior to write-back. failure prior to write-back.
13.12 Cache Replacement 13.12. Cache Replacement
If a new cacheable (see sections 14.9.2, 13.2.5, 13.2.6 and 13.8) If a new cacheable (see sections 14.9.2, 13.2.5, 13.2.6 and 13.8)
response is received from a resource while any existing responses for response is received from a resource while any existing responses for
the same resource are cached, the cache SHOULD use the new response the same resource are cached, the cache SHOULD use the new response
to reply to the current request. It MAY insert it into cache storage to reply to the current request. It MAY insert it into cache storage
and MAY, if it meets all other requirements, use it to respond to any and MAY, if it meets all other requirements, use it to respond to any
future requests that would previously have caused the old response to future requests that would previously have caused the old response to
be returned. If it inserts the new response into cache storage the be returned. If it inserts the new response into cache storage the
rules in section 13.5.3 apply. rules in Section 13.5.3 apply.
Note: a new response that has an older Date header value than Note: a new response that has an older Date header value than
existing cached responses is not cacheable. existing cached responses is not cacheable.
13.13 History Lists 13.13. History Lists
User agents often have history mechanisms, such as "Back" buttons and User agents often have history mechanisms, such as "Back" buttons and
history lists, which can be used to redisplay an entity retrieved history lists, which can be used to redisplay an entity retrieved
earlier in a session. earlier in a session.
History mechanisms and caches are different. In particular history History mechanisms and caches are different. In particular history
mechanisms SHOULD NOT try to show a semantically transparent view of mechanisms SHOULD NOT try to show a semantically transparent view of
the current state of a resource. Rather, a history mechanism is meant the current state of a resource. Rather, a history mechanism is
to show exactly what the user saw at the time when the resource was meant to show exactly what the user saw at the time when the resource
retrieved. was retrieved.
By default, an expiration time does not apply to history mechanisms. By default, an expiration time does not apply to history mechanisms.
If the entity is still in storage, a history mechanism SHOULD display If the entity is still in storage, a history mechanism SHOULD display
it even if the entity has expired, unless the user has specifically it even if the entity has expired, unless the user has specifically
configured the agent to refresh expired history documents. configured the agent to refresh expired history documents.
This is not to be construed to prohibit the history mechanism from This is not to be construed to prohibit the history mechanism from
telling the user that a view might be stale. telling the user that a view might be stale.
Note: if history list mechanisms unnecessarily prevent users from Note: if history list mechanisms unnecessarily prevent users from
skipping to change at page 100, line 5 skipping to change at page 102, line 38
they would otherwise like to. Service authors may consider it they would otherwise like to. Service authors may consider it
important that users not be presented with error messages or important that users not be presented with error messages or
warning messages when they use navigation controls (such as BACK) warning messages when they use navigation controls (such as BACK)
to view previously fetched resources. Even though sometimes such to view previously fetched resources. Even though sometimes such
resources ought not to cached, or ought to expire quickly, user resources ought not to cached, or ought to expire quickly, user
interface considerations may force service authors to resort to interface considerations may force service authors to resort to
other means of preventing caching (e.g. "once-only" URLs) in order other means of preventing caching (e.g. "once-only" URLs) in order
not to suffer the effects of improperly functioning history not to suffer the effects of improperly functioning history
mechanisms. mechanisms.
14 Header Field Definitions 14. Header Field Definitions
This section defines the syntax and semantics of all standard This section defines the syntax and semantics of all standard
HTTP/1.1 header fields. For entity-header fields, both sender and HTTP/1.1 header fields. For entity-header fields, both sender and
recipient refer to either the client or the server, depending on who recipient refer to either the client or the server, depending on who
sends and who receives the entity. sends and who receives the entity.
14.1 Accept 14.1. Accept
The Accept request-header field can be used to specify certain media The Accept request-header field can be used to specify certain media
types which are acceptable for the response. Accept headers can be types which are acceptable for the response. Accept headers can be
used to indicate that the request is specifically limited to a small used to indicate that the request is specifically limited to a small
set of desired types, as in the case of a request for an in-line set of desired types, as in the case of a request for an in-line
image. image.
Accept = "Accept" ":" Accept = "Accept" ":"
#( media-range [ accept-params ] ) #( media-range [ accept-params ] )
skipping to change at page 100, line 40 skipping to change at page 103, line 25
The asterisk "*" character is used to group media types into ranges, The asterisk "*" character is used to group media types into ranges,
with "*/*" indicating all media types and "type/*" indicating all with "*/*" indicating all media types and "type/*" indicating all
subtypes of that type. The media-range MAY include media type subtypes of that type. The media-range MAY include media type
parameters that are applicable to that range. parameters that are applicable to that range.
Each media-range MAY be followed by one or more accept-params, Each media-range MAY be followed by one or more accept-params,
beginning with the "q" parameter for indicating a relative quality beginning with the "q" parameter for indicating a relative quality
factor. The first "q" parameter (if any) separates the media-range factor. The first "q" parameter (if any) separates the media-range
parameter(s) from the accept-params. Quality factors allow the user parameter(s) from the accept-params. Quality factors allow the user
or user agent to indicate the relative degree of preference for that or user agent to indicate the relative degree of preference for that
media-range, using the qvalue scale from 0 to 1 (section 3.9). The media-range, using the qvalue scale from 0 to 1 (Section 3.9). The
default value is q=1. default value is q=1.
Note: Use of the "q" parameter name to separate media type Note: Use of the "q" parameter name to separate media type
parameters from Accept extension parameters is due to historical parameters from Accept extension parameters is due to historical
practice. Although this prevents any media type parameter named practice. Although this prevents any media type parameter named
"q" from being used with a media range, such an event is believed "q" from being used with a media range, such an event is believed
to be unlikely given the lack of any "q" parameters in the IANA to be unlikely given the lack of any "q" parameters in the IANA
media type registry and the rare usage of any media type media type registry and the rare usage of any media type
parameters in Accept. Future media types are discouraged from parameters in Accept. Future media types are discouraged from
registering any parameter named "q". registering any parameter named "q".
The example The example
Accept: audio/*; q=0.2, audio/basic Accept: audio/*; q=0.2, audio/basic
SHOULD be interpreted as "I prefer audio/basic, but send me any audio SHOULD be interpreted as "I prefer audio/basic, but send me any audio
type if it is the best available after an 80% mark-down in quality." type if it is the best available after an 80% mark-down in quality."
If no Accept header field is present, then it is assumed that the If no Accept header field is present, then it is assumed that the
client accepts all media types. If an Accept header field is present, client accepts all media types. If an Accept header field is
and if the server cannot send a response which is acceptable present, and if the server cannot send a response which is acceptable
according to the combined Accept field value, then the server SHOULD according to the combined Accept field value, then the server SHOULD
send a 406 (not acceptable) response. send a 406 (not acceptable) response.
A more elaborate example is A more elaborate example is
Accept: text/plain; q=0.5, text/html, Accept: text/plain; q=0.5, text/html,
text/x-dvi; q=0.8, text/x-c text/x-dvi; q=0.8, text/x-c
Verbally, this would be interpreted as "text/html and text/x-c are Verbally, this would be interpreted as "text/html and text/x-c are
the preferred media types, but if they do not exist, then send the the preferred media types, but if they do not exist, then send the
text/x-dvi entity, and if that does not exist, send the text/plain text/x-dvi entity, and if that does not exist, send the text/plain
entity." entity."
Media ranges can be overridden by more specific media ranges or Media ranges can be overridden by more specific media ranges or
specific media types. If more than one media range applies to a given specific media types. If more than one media range applies to a
type, the most specific reference has precedence. For example, given type, the most specific reference has precedence. For example,
Accept: text/*, text/html, text/html;level=1, */* Accept: text/*, text/html, text/html;level=1, */*
have the following precedence: have the following precedence:
1) text/html;level=1 1) text/html;level=1
2) text/html 2) text/html
3) text/* 3) text/*
4) */* 4) */*
skipping to change at page 102, line 9 skipping to change at page 104, line 41
would cause the following values to be associated: would cause the following values to be associated:
text/html;level=1 = 1 text/html;level=1 = 1
text/html = 0.7 text/html = 0.7
text/plain = 0.3 text/plain = 0.3
image/jpeg = 0.5 image/jpeg = 0.5
text/html;level=2 = 0.4 text/html;level=2 = 0.4
text/html;level=3 = 0.7 text/html;level=3 = 0.7
Note: A user agent might be provided with a default set of quality Note: A user agent might be provided with a default set of quality
values for certain media ranges. However, unless the user agent is values for certain media ranges. However, unless the user agent is a
a closed system which cannot interact with other rendering agents, closed system which cannot interact with other rendering agents, this
this default set ought to be configurable by the user. default set ought to be configurable by the user.
14.2 Accept-Charset 14.2. Accept-Charset
The Accept-Charset request-header field can be used to indicate what The Accept-Charset request-header field can be used to indicate what
character sets are acceptable for the response. This field allows character sets are acceptable for the response. This field allows
clients capable of understanding more comprehensive or special- clients capable of understanding more comprehensive or special-
purpose character sets to signal that capability to a server which is purpose character sets to signal that capability to a server which is
capable of representing documents in those character sets. capable of representing documents in those character sets.
Accept-Charset = "Accept-Charset" ":" Accept-Charset = "Accept-Charset" ":"
1#( ( charset | "*" )[ ";" "q" "=" qvalue ] ) 1#( ( charset | "*" )[ ";" "q" "=" qvalue ] )
Character set values are described in section 3.4. Each charset MAY Character set values are described in Section 3.4. Each charset MAY
be given an associated quality value which represents the user's be given an associated quality value which represents the user's
preference for that charset. The default value is q=1. An example is preference for that charset. The default value is q=1. An example
is
Accept-Charset: iso-8859-5, unicode-1-1;q=0.8 Accept-Charset: iso-8859-5, unicode-1-1;q=0.8
The special value "*", if present in the Accept-Charset field, The special value "*", if present in the Accept-Charset field,
matches every character set (including ISO-8859-1) which is not matches every character set (including ISO-8859-1) which is not
mentioned elsewhere in the Accept-Charset field. If no "*" is present mentioned elsewhere in the Accept-Charset field. If no "*" is
in an Accept-Charset field, then all character sets not explicitly present in an Accept-Charset field, then all character sets not
mentioned get a quality value of 0, except for ISO-8859-1, which gets explicitly mentioned get a quality value of 0, except for ISO-8859-1,
a quality value of 1 if not explicitly mentioned. which gets a quality value of 1 if not explicitly mentioned.
If no Accept-Charset header is present, the default is that any If no Accept-Charset header is present, the default is that any
character set is acceptable. If an Accept-Charset header is present, character set is acceptable. If an Accept-Charset header is present,
and if the server cannot send a response which is acceptable and if the server cannot send a response which is acceptable
according to the Accept-Charset header, then the server SHOULD send according to the Accept-Charset header, then the server SHOULD send
an error response with the 406 (not acceptable) status code, though an error response with the 406 (not acceptable) status code, though
the sending of an unacceptable response is also allowed. the sending of an unacceptable response is also allowed.
14.3 Accept-Encoding 14.3. Accept-Encoding
The Accept-Encoding request-header field is similar to Accept, but The Accept-Encoding request-header field is similar to Accept, but
restricts the content-codings (section 3.5) that are acceptable in restricts the content-codings (Section 3.5) that are acceptable in
the response. the response.
Accept-Encoding = "Accept-Encoding" ":" Accept-Encoding = "Accept-Encoding" ":"
1#( codings [ ";" "q" "=" qvalue ] ) 1#( codings [ ";" "q" "=" qvalue ] )
codings = ( content-coding | "*" ) codings = ( content-coding | "*" )
Examples of its use are: Examples of its use are:
Accept-Encoding: compress, gzip Accept-Encoding: compress, gzip
Accept-Encoding: Accept-Encoding:
Accept-Encoding: * Accept-Encoding: *
Accept-Encoding: compress;q=0.5, gzip;q=1.0 Accept-Encoding: compress;q=0.5, gzip;q=1.0
Accept-Encoding: gzip;q=1.0, identity; q=0.5, *;q=0 Accept-Encoding: gzip;q=1.0, identity; q=0.5, *;q=0
A server tests whether a content-coding is acceptable, according to A server tests whether a content-coding is acceptable, according to
an Accept-Encoding field, using these rules: an Accept-Encoding field, using these rules:
1. If the content-coding is one of the content-codings listed in 1. If the content-coding is one of the content-codings listed in the
the Accept-Encoding field, then it is acceptable, unless it is Accept-Encoding field, then it is acceptable, unless it is
accompanied by a qvalue of 0. (As defined in section 3.9, a accompanied by a qvalue of 0. (As defined in Section 3.9, a
qvalue of 0 means "not acceptable.") qvalue of 0 means "not acceptable.")
2. The special "*" symbol in an Accept-Encoding field matches any 2. The special "*" symbol in an Accept-Encoding field matches any
available content-coding not explicitly listed in the header available content-coding not explicitly listed in the header
field. field.
3. If multiple content-codings are acceptable, then the acceptable 3. If multiple content-codings are acceptable, then the acceptable
content-coding with the highest non-zero qvalue is preferred. content-coding with the highest non-zero qvalue is preferred.
4. The "identity" content-coding is always acceptable, unless 4. The "identity" content-coding is always acceptable, unless
skipping to change at page 103, line 50 skipping to change at page 106, line 33
with the 406 (Not Acceptable) status code. with the 406 (Not Acceptable) status code.
If no Accept-Encoding field is present in a request, the server MAY If no Accept-Encoding field is present in a request, the server MAY
assume that the client will accept any content coding. In this case, assume that the client will accept any content coding. In this case,
if "identity" is one of the available content-codings, then the if "identity" is one of the available content-codings, then the
server SHOULD use the "identity" content-coding, unless it has server SHOULD use the "identity" content-coding, unless it has
additional information that a different content-coding is meaningful additional information that a different content-coding is meaningful
to the client. to the client.
Note: If the request does not include an Accept-Encoding field, Note: If the request does not include an Accept-Encoding field,
and if the "identity" content-coding is unavailable, then and if the "identity" content-coding is unavailable, then content-
content-codings commonly understood by HTTP/1.0 clients (i.e., codings commonly understood by HTTP/1.0 clients (i.e., "gzip" and
"gzip" and "compress") are preferred; some older clients "compress") are preferred; some older clients improperly display
improperly display messages sent with other content-codings. The messages sent with other content-codings. The server might also
server might also make this decision based on information about make this decision based on information about the particular user-
the particular user-agent or client. agent or client.
Note: Most HTTP/1.0 applications do not recognize or obey qvalues Note: Most HTTP/1.0 applications do not recognize or obey qvalues
associated with content-codings. This means that qvalues will not associated with content-codings. This means that qvalues will not
work and are not permitted with x-gzip or x-compress. work and are not permitted with x-gzip or x-compress.
14.4 Accept-Language 14.4. Accept-Language
The Accept-Language request-header field is similar to Accept, but The Accept-Language request-header field is similar to Accept, but
restricts the set of natural languages that are preferred as a restricts the set of natural languages that are preferred as a
response to the request. Language tags are defined in section 3.10. response to the request. Language tags are defined in Section 3.10.
Accept-Language = "Accept-Language" ":" Accept-Language = "Accept-Language" ":"
1#( language-range [ ";" "q" "=" qvalue ] ) 1#( language-range [ ";" "q" "=" qvalue ] )
language-range = ( ( 1*8ALPHA *( "-" 1*8ALPHA ) ) | "*" ) language-range = ( ( 1*8ALPHA *( "-" 1*8ALPHA ) ) | "*" )
Each language-range MAY be given an associated quality value which Each language-range MAY be given an associated quality value which
represents an estimate of the user's preference for the languages represents an estimate of the user's preference for the languages
specified by that range. The quality value defaults to "q=1". For specified by that range. The quality value defaults to "q=1". For
example, example,
skipping to change at page 104, line 45 skipping to change at page 107, line 28
matches every tag not matched by any other range present in the matches every tag not matched by any other range present in the
Accept-Language field. Accept-Language field.
Note: This use of a prefix matching rule does not imply that Note: This use of a prefix matching rule does not imply that
language tags are assigned to languages in such a way that it is language tags are assigned to languages in such a way that it is
always true that if a user understands a language with a certain always true that if a user understands a language with a certain
tag, then this user will also understand all languages with tags tag, then this user will also understand all languages with tags
for which this tag is a prefix. The prefix rule simply allows the for which this tag is a prefix. The prefix rule simply allows the
use of prefix tags if this is the case. use of prefix tags if this is the case.
The language quality factor assigned to a language-tag by the The language quality factor assigned to a language-tag by the Accept-
Accept-Language field is the quality value of the longest language- Language field is the quality value of the longest language-range in
range in the field that matches the language-tag. If no language- the field that matches the language-tag. If no language-range in the
range in the field matches the tag, the language quality factor field matches the tag, the language quality factor assigned is 0. If
assigned is 0. If no Accept-Language header is present in the no Accept-Language header is present in the request, the server
request, the server
SHOULD assume that all languages are equally acceptable. If an SHOULD assume that all languages are equally acceptable. If an
Accept-Language header is present, then all languages which are Accept-Language header is present, then all languages which are
assigned a quality factor greater than 0 are acceptable. assigned a quality factor greater than 0 are acceptable.
It might be contrary to the privacy expectations of the user to send It might be contrary to the privacy expectations of the user to send
an Accept-Language header with the complete linguistic preferences of an Accept-Language header with the complete linguistic preferences of
the user in every request. For a discussion of this issue, see the user in every request. For a discussion of this issue, see
section 15.1.4. Section 15.1.4.
As intelligibility is highly dependent on the individual user, it is As intelligibility is highly dependent on the individual user, it is
recommended that client applications make the choice of linguistic recommended that client applications make the choice of linguistic
preference available to the user. If the choice is not made preference available to the user. If the choice is not made
available, then the Accept-Language header field MUST NOT be given in available, then the Accept-Language header field MUST NOT be given in
the request. the request.
Note: When making the choice of linguistic preference available to Note: When making the choice of linguistic preference available to
the user, we remind implementors of the fact that users are not the user, we remind implementors of the fact that users are not
familiar with the details of language matching as described above, familiar with the details of language matching as described above,
and should provide appropriate guidance. As an example, users and should provide appropriate guidance. As an example, users
might assume that on selecting "en-gb", they will be served any might assume that on selecting "en-gb", they will be served any
kind of English document if British English is not available. A kind of English document if British English is not available. A
user agent might suggest in such a case to add "en" to get the user agent might suggest in such a case to add "en" to get the
best matching behavior. best matching behavior.
14.5 Accept-Ranges 14.5. Accept-Ranges
The Accept-Ranges response-header field allows the server to The Accept-Ranges response-header field allows the server to indicate
indicate its acceptance of range requests for a resource: its acceptance of range requests for a resource:
Accept-Ranges = "Accept-Ranges" ":" acceptable-ranges Accept-Ranges = "Accept-Ranges" ":" acceptable-ranges
acceptable-ranges = 1#range-unit | "none" acceptable-ranges = 1#range-unit | "none"
Origin servers that accept byte-range requests MAY send Origin servers that accept byte-range requests MAY send
Accept-Ranges: bytes Accept-Ranges: bytes
but are not required to do so. Clients MAY generate byte-range but are not required to do so. Clients MAY generate byte-range
requests without having received this header for the resource requests without having received this header for the resource
involved. Range units are defined in section 3.12. involved. Range units are defined in Section 3.12.
Servers that do not accept any kind of range request for a Servers that do not accept any kind of range request for a resource
resource MAY send MAY send
Accept-Ranges: none Accept-Ranges: none
to advise the client not to attempt a range request. to advise the client not to attempt a range request.
14.6 Age 14.6. Age
The Age response-header field conveys the sender's estimate of the The Age response-header field conveys the sender's estimate of the
amount of time since the response (or its revalidation) was amount of time since the response (or its revalidation) was generated
generated at the origin server. A cached response is "fresh" if at the origin server. A cached response is "fresh" if its age does
its age does not exceed its freshness lifetime. Age values are not exceed its freshness lifetime. Age values are calculated as
calculated as specified in section 13.2.3. specified in Section 13.2.3.
Age = "Age" ":" age-value Age = "Age" ":" age-value
age-value = delta-seconds age-value = delta-seconds
Age values are non-negative decimal integers, representing time in Age values are non-negative decimal integers, representing time in
seconds. seconds.
If a cache receives a value larger than the largest positive If a cache receives a value larger than the largest positive integer
integer it can represent, or if any of its age calculations it can represent, or if any of its age calculations overflows, it
overflows, it MUST transmit an Age header with a value of MUST transmit an Age header with a value of 2147483648 (2^31). An
2147483648 (2^31). An HTTP/1.1 server that includes a cache MUST HTTP/1.1 server that includes a cache MUST include an Age header
include an Age header field in every response generated from its field in every response generated from its own cache. Caches SHOULD
own cache. Caches SHOULD use an arithmetic type of at least 31 use an arithmetic type of at least 31 bits of range.
bits of range.
14.7 Allow 14.7. Allow
The Allow entity-header field lists the set of methods supported The Allow entity-header field lists the set of methods supported by
by the resource identified by the Request-URI. The purpose of this the resource identified by the Request-URI. The purpose of this
field is strictly to inform the recipient of valid methods field is strictly to inform the recipient of valid methods associated
associated with the resource. An Allow header field MUST be with the resource. An Allow header field MUST be present in a 405
present in a 405 (Method Not Allowed) response. (Method Not Allowed) response.
Allow = "Allow" ":" #Method Allow = "Allow" ":" #Method
Example of use: Example of use:
Allow: GET, HEAD, PUT Allow: GET, HEAD, PUT
This field cannot prevent a client from trying other methods. This field cannot prevent a client from trying other methods.
However, the indications given by the Allow header field value However, the indications given by the Allow header field value SHOULD
SHOULD be followed. The actual set of allowed methods is defined be followed. The actual set of allowed methods is defined by the
by the origin server at the time of each request. origin server at the time of each request.
The Allow header field MAY be provided with a PUT request to The Allow header field MAY be provided with a PUT request to
recommend the methods to be supported by the new or modified recommend the methods to be supported by the new or modified
resource. The server is not required to support these methods and resource. The server is not required to support these methods and
SHOULD include an Allow header in the response giving the actual SHOULD include an Allow header in the response giving the actual
supported methods. supported methods.
A proxy MUST NOT modify the Allow header field even if it does not A proxy MUST NOT modify the Allow header field even if it does not
understand all the methods specified, since the user agent might understand all the methods specified, since the user agent might have
have other means of communicating with the origin server. other means of communicating with the origin server.
14.8 Authorization 14.8. Authorization
A user agent that wishes to authenticate itself with a server-- A user agent that wishes to authenticate itself with a server--
usually, but not necessarily, after receiving a 401 response--does usually, but not necessarily, after receiving a 401 response--does so
so by including an Authorization request-header field with the by including an Authorization request-header field with the request.
request. The Authorization field value consists of credentials The Authorization field value consists of credentials containing the
containing the authentication information of the user agent for authentication information of the user agent for the realm of the
the realm of the resource being requested. resource being requested.
Authorization = "Authorization" ":" credentials Authorization = "Authorization" ":" credentials
HTTP access authentication is described in "HTTP Authentication: HTTP access authentication is described in "HTTP Authentication:
Basic and Digest Access Authentication" [43]. If a request is Basic and Digest Access Authentication" [RFC2617]. If a request is
authenticated and a realm specified, the same credentials SHOULD authenticated and a realm specified, the same credentials SHOULD be
be valid for all other requests within this realm (assuming that valid for all other requests within this realm (assuming that the
the authentication scheme itself does not require otherwise, such authentication scheme itself does not require otherwise, such as
as credentials that vary according to a challenge value or using credentials that vary according to a challenge value or using
synchronized clocks). synchronized clocks).
When a shared cache (see section 13.7) receives a request When a shared cache (see Section 13.7) receives a request containing
containing an Authorization field, it MUST NOT return the an Authorization field, it MUST NOT return the corresponding response
corresponding response as a reply to any other request, unless one as a reply to any other request, unless one of the following specific
of the following specific exceptions holds: exceptions holds:
1. If the response includes the "s-maxage" cache-control 1. If the response includes the "s-maxage" cache-control directive,
directive, the cache MAY use that response in replying to a the cache MAY use that response in replying to a subsequent
subsequent request. But (if the specified maximum age has request. But (if the specified maximum age has passed) a proxy
passed) a proxy cache MUST first revalidate it with the origin cache MUST first revalidate it with the origin server, using the
server, using the request-headers from the new request to allow request-headers from the new request to allow the origin server
the origin server to authenticate the new request. (This is the to authenticate the new request. (This is the defined behavior
defined behavior for s-maxage.) If the response includes "s- for s-maxage.) If the response includes "s-maxage=0", the proxy
maxage=0", the proxy MUST always revalidate it before re-using MUST always revalidate it before re-using it.
it.
2. If the response includes the "must-revalidate" cache-control 2. If the response includes the "must-revalidate" cache-control
directive, the cache MAY use that response in replying to a directive, the cache MAY use that response in replying to a
subsequent request. But if the response is stale, all caches subsequent request. But if the response is stale, all caches
MUST first revalidate it with the origin server, using the MUST first revalidate it with the origin server, using the
request-headers from the new request to allow the origin server request-headers from the new request to allow the origin server
to authenticate the new request. to authenticate the new request.
3. If the response includes the "public" cache-control directive, 3. If the response includes the "public" cache-control directive, it
it MAY be returned in reply to any subsequent request. MAY be returned in reply to any subsequent request.
14.9 Cache-Control 14.9. Cache-Control
The Cache-Control general-header field is used to specify directives The Cache-Control general-header field is used to specify directives
that MUST be obeyed by all caching mechanisms along the that MUST be obeyed by all caching mechanisms along the request/
request/response chain. The directives specify behavior intended to response chain. The directives specify behavior intended to prevent
prevent caches from adversely interfering with the request or caches from adversely interfering with the request or response.
response. These directives typically override the default caching These directives typically override the default caching algorithms.
algorithms. Cache directives are unidirectional in that the presence Cache directives are unidirectional in that the presence of a
of a directive in a request does not imply that the same directive is directive in a request does not imply that the same directive is to
to be given in the response. be given in the response.
Note that HTTP/1.0 caches might not implement Cache-Control and Note that HTTP/1.0 caches might not implement Cache-Control and
might only implement Pragma: no-cache (see section 14.32). might only implement Pragma: no-cache (see Section 14.32).
Cache directives MUST be passed through by a proxy or gateway Cache directives MUST be passed through by a proxy or gateway
application, regardless of their significance to that application, application, regardless of their significance to that application,
since the directives might be applicable to all recipients along the since the directives might be applicable to all recipients along the
request/response chain. It is not possible to specify a cache- request/response chain. It is not possible to specify a cache-
directive for a specific cache. directive for a specific cache.
Cache-Control = "Cache-Control" ":" 1#cache-directive Cache-Control = "Cache-Control" ":" 1#cache-directive
cache-directive = cache-request-directive cache-directive = cache-request-directive
skipping to change at page 109, line 15 skipping to change at page 111, line 45
directive applies to the entire request or response. When such a directive applies to the entire request or response. When such a
directive appears with a 1#field-name parameter, it applies only to directive appears with a 1#field-name parameter, it applies only to
the named field or fields, and not to the rest of the request or the named field or fields, and not to the rest of the request or
response. This mechanism supports extensibility; implementations of response. This mechanism supports extensibility; implementations of
future versions of the HTTP protocol might apply these directives to future versions of the HTTP protocol might apply these directives to
header fields not defined in HTTP/1.1. header fields not defined in HTTP/1.1.
The cache-control directives can be broken down into these general The cache-control directives can be broken down into these general
categories: categories:
- Restrictions on what are cacheable; these may only be imposed by o Restrictions on what are cacheable; these may only be imposed by
the origin server. the origin server.
- Restrictions on what may be stored by a cache; these may be o Restrictions on what may be stored by a cache; these may be
imposed by either the origin server or the user agent. imposed by either the origin server or the user agent.
- Modifications of the basic expiration mechanism; these may be o Modifications of the basic expiration mechanism; these may be
imposed by either the origin server or the user agent. imposed by either the origin server or the user agent.
- Controls over cache revalidation and reload; these may only be o Controls over cache revalidation and reload; these may only be
imposed by a user agent. imposed by a user agent.
- Control over transformation of entities. o Control over transformation of entities.
- Extensions to the caching system. o Extensions to the caching system.
14.9.1 What is Cacheable 14.9.1. What is Cacheable
By default, a response is cacheable if the requirements of the By default, a response is cacheable if the requirements of the
request method, request header fields, and the response status request method, request header fields, and the response status
indicate that it is cacheable. Section 13.4 summarizes these defaults indicate that it is cacheable. Section 13.4 summarizes these
for cacheability. The following Cache-Control response directives defaults for cacheability. The following Cache-Control response
allow an origin server to override the default cacheability of a directives allow an origin server to override the default
response: cacheability of a response:
public public
Indicates that the response MAY be cached by any cache, even if it Indicates that the response MAY be cached by any cache, even if it
would normally be non-cacheable or cacheable only within a non- would normally be non-cacheable or cacheable only within a non-
shared cache. (See also Authorization, section 14.8, for shared cache. (See also Authorization, Section 14.8, for
additional details.) additional details.)
private private
Indicates that all or part of the response message is intended for Indicates that all or part of the response message is intended for
a single user and MUST NOT be cached by a shared cache. This a single user and MUST NOT be cached by a shared cache. This
allows an origin server to state that the specified parts of the allows an origin server to state that the specified parts of the
response are intended for only one user and are not a valid response are intended for only one user and are not a valid
response for requests by other users. A private (non-shared) cache response for requests by other users. A private (non-shared)
MAY cache the response. cache MAY cache the response.
Note: This usage of the word private only controls where the Note: This usage of the word private only controls where the
response may be cached, and cannot ensure the privacy of the response may be cached, and cannot ensure the privacy of the
message content. message content.
no-cache no-cache
If the no-cache directive does not specify a field-name, then a If the no-cache directive does not specify a field-name, then a
cache MUST NOT use the response to satisfy a subsequent request cache MUST NOT use the response to satisfy a subsequent request
without successful revalidation with the origin server. This without successful revalidation with the origin server. This
allows an origin server to prevent caching even by caches that allows an origin server to prevent caching even by caches that
have been configured to return stale responses to client requests. have been configured to return stale responses to client requests.
If the no-cache directive does specify one or more field-names, If the no-cache directive does specify one or more field-names,
then a cache MAY use the response to satisfy a subsequent request, then a cache MAY use the response to satisfy a subsequent request,
subject to any other restrictions on caching. However, the subject to any other restrictions on caching. However, the
specified field-name(s) MUST NOT be sent in the response to a specified field-name(s) MUST NOT be sent in the response to a
skipping to change at page 110, line 31 skipping to change at page 113, line 12
subject to any other restrictions on caching. However, the subject to any other restrictions on caching. However, the
specified field-name(s) MUST NOT be sent in the response to a specified field-name(s) MUST NOT be sent in the response to a
subsequent request without successful revalidation with the origin subsequent request without successful revalidation with the origin
server. This allows an origin server to prevent the re-use of server. This allows an origin server to prevent the re-use of
certain header fields in a response, while still allowing caching certain header fields in a response, while still allowing caching
of the rest of the response. of the rest of the response.
Note: Most HTTP/1.0 caches will not recognize or obey this Note: Most HTTP/1.0 caches will not recognize or obey this
directive. directive.
14.9.2 What May be Stored by Caches 14.9.2. What May be Stored by Caches
no-store no-store
The purpose of the no-store directive is to prevent the The purpose of the no-store directive is to prevent the
inadvertent release or retention of sensitive information (for inadvertent release or retention of sensitive information (for
example, on backup tapes). The no-store directive applies to the example, on backup tapes). The no-store directive applies to the
entire message, and MAY be sent either in a response or in a entire message, and MAY be sent either in a response or in a
request. If sent in a request, a cache MUST NOT store any part of request. If sent in a request, a cache MUST NOT store any part of
either this request or any response to it. If sent in a response, either this request or any response to it. If sent in a response,
a cache MUST NOT store any part of either this response or the a cache MUST NOT store any part of either this response or the
request that elicited it. This directive applies to both non- request that elicited it. This directive applies to both non-
shared and shared caches. "MUST NOT store" in this context means shared and shared caches. "MUST NOT store" in this context means
that the cache MUST NOT intentionally store the information in that the cache MUST NOT intentionally store the information in
skipping to change at page 111, line 15 skipping to change at page 113, line 45
The purpose of this directive is to meet the stated requirements The purpose of this directive is to meet the stated requirements
of certain users and service authors who are concerned about of certain users and service authors who are concerned about
accidental releases of information via unanticipated accesses to accidental releases of information via unanticipated accesses to
cache data structures. While the use of this directive might cache data structures. While the use of this directive might
improve privacy in some cases, we caution that it is NOT in any improve privacy in some cases, we caution that it is NOT in any
way a reliable or sufficient mechanism for ensuring privacy. In way a reliable or sufficient mechanism for ensuring privacy. In
particular, malicious or compromised caches might not recognize or particular, malicious or compromised caches might not recognize or
obey this directive, and communications networks might be obey this directive, and communications networks might be
vulnerable to eavesdropping. vulnerable to eavesdropping.
14.9.3 Modifications of the Basic Expiration Mechanism 14.9.3. Modifications of the Basic Expiration Mechanism
The expiration time of an entity MAY be specified by the origin The expiration time of an entity MAY be specified by the origin
server using the Expires header (see section 14.21). Alternatively, server using the Expires header (see Section 14.21). Alternatively,
it MAY be specified using the max-age directive in a response. When it MAY be specified using the max-age directive in a response. When
the max-age cache-control directive is present in a cached response, the max-age cache-control directive is present in a cached response,
the response is stale if its current age is greater than the age the response is stale if its current age is greater than the age
value given (in seconds) at the time of a new request for that value given (in seconds) at the time of a new request for that
resource. The max-age directive on a response implies that the resource. The max-age directive on a response implies that the
response is cacheable (i.e., "public") unless some other, more response is cacheable (i.e., "public") unless some other, more
restrictive cache directive is also present. restrictive cache directive is also present.
If a response includes both an Expires header and a max-age If a response includes both an Expires header and a max-age
directive, the max-age directive overrides the Expires header, even directive, the max-age directive overrides the Expires header, even
if the Expires header is more restrictive. This rule allows an origin if the Expires header is more restrictive. This rule allows an
server to provide, for a given response, a longer expiration time to origin server to provide, for a given response, a longer expiration
an HTTP/1.1 (or later) cache than to an HTTP/1.0 cache. This might be time to an HTTP/1.1 (or later) cache than to an HTTP/1.0 cache. This
useful if certain HTTP/1.0 caches improperly calculate ages or might be useful if certain HTTP/1.0 caches improperly calculate ages
expiration times, perhaps due to desynchronized clocks. or expiration times, perhaps due to desynchronized clocks.
Many HTTP/1.0 cache implementations will treat an Expires value that Many HTTP/1.0 cache implementations will treat an Expires value that
is less than or equal to the response Date value as being equivalent is less than or equal to the response Date value as being equivalent
to the Cache-Control response directive "no-cache". If an HTTP/1.1 to the Cache-Control response directive "no-cache". If an HTTP/1.1
cache receives such a response, and the response does not include a cache receives such a response, and the response does not include a
Cache-Control header field, it SHOULD consider the response to be Cache-Control header field, it SHOULD consider the response to be
non-cacheable in order to retain compatibility with HTTP/1.0 servers. non-cacheable in order to retain compatibility with HTTP/1.0 servers.
Note: An origin server might wish to use a relatively new HTTP Note: An origin server might wish to use a relatively new HTTP
cache control feature, such as the "private" directive, on a cache control feature, such as the "private" directive, on a
skipping to change at page 112, line 6 skipping to change at page 114, line 33
Note: An origin server might wish to use a relatively new HTTP Note: An origin server might wish to use a relatively new HTTP
cache control feature, such as the "private" directive, on a cache control feature, such as the "private" directive, on a
network including older caches that do not understand that network including older caches that do not understand that
feature. The origin server will need to combine the new feature feature. The origin server will need to combine the new feature
with an Expires field whose value is less than or equal to the with an Expires field whose value is less than or equal to the
Date value. This will prevent older caches from improperly Date value. This will prevent older caches from improperly
caching the response. caching the response.
s-maxage s-maxage
If a response includes an s-maxage directive, then for a shared If a response includes an s-maxage directive, then for a shared
cache (but not for a private cache), the maximum age specified by cache (but not for a private cache), the maximum age specified by
this directive overrides the maximum age specified by either the this directive overrides the maximum age specified by either the
max-age directive or the Expires header. The s-maxage directive max-age directive or the Expires header. The s-maxage directive
also implies the semantics of the proxy-revalidate directive (see also implies the semantics of the proxy-revalidate directive (see
section 14.9.4), i.e., that the shared cache must not use the Section 14.9.4), i.e., that the shared cache must not use the
entry after it becomes stale to respond to a subsequent request entry after it becomes stale to respond to a subsequent request
without first revalidating it with the origin server. The s- without first revalidating it with the origin server. The
maxage directive is always ignored by a private cache. s-maxage directive is always ignored by a private cache.
Note that most older caches, not compliant with this specification, Note that most older caches, not compliant with this specification,
do not implement any cache-control directives. An origin server do not implement any cache-control directives. An origin server
wishing to use a cache-control directive that restricts, but does not wishing to use a cache-control directive that restricts, but does not
prevent, caching by an HTTP/1.1-compliant cache MAY exploit the prevent, caching by an HTTP/1.1-compliant cache MAY exploit the
requirement that the max-age directive overrides the Expires header, requirement that the max-age directive overrides the Expires header,
and the fact that pre-HTTP/1.1-compliant caches do not observe the and the fact that pre-HTTP/1.1-compliant caches do not observe the
max-age directive. max-age directive.
Other directives allow a user agent to modify the basic expiration Other directives allow a user agent to modify the basic expiration
skipping to change at page 113, line 14 skipping to change at page 115, line 47
A cache MAY be configured to return stale responses without A cache MAY be configured to return stale responses without
validation, but only if this does not conflict with any "MUST"-level validation, but only if this does not conflict with any "MUST"-level
requirements concerning cache validation (e.g., a "must-revalidate" requirements concerning cache validation (e.g., a "must-revalidate"
cache-control directive). cache-control directive).
If both the new request and the cached entry include "max-age" If both the new request and the cached entry include "max-age"
directives, then the lesser of the two values is used for determining directives, then the lesser of the two values is used for determining
the freshness of the cached entry for that request. the freshness of the cached entry for that request.
14.9.4 Cache Revalidation and Reload Controls 14.9.4. Cache Revalidation and Reload Controls
Sometimes a user agent might want or need to insist that a cache Sometimes a user agent might want or need to insist that a cache
revalidate its cache entry with the origin server (and not just with revalidate its cache entry with the origin server (and not just with
the next cache along the path to the origin server), or to reload its the next cache along the path to the origin server), or to reload its
cache entry from the origin server. End-to-end revalidation might be cache entry from the origin server. End-to-end revalidation might be
necessary if either the cache or the origin server has overestimated necessary if either the cache or the origin server has overestimated
the expiration time of the cached response. End-to-end reload may be the expiration time of the cached response. End-to-end reload may be
necessary if the cache entry has become corrupted for some reason. necessary if the cache entry has become corrupted for some reason.
End-to-end revalidation may be requested either when the client does End-to-end revalidation may be requested either when the client does
skipping to change at page 114, line 20 skipping to change at page 117, line 9
directive, to revalidate its own cache entry, and the client has directive, to revalidate its own cache entry, and the client has
supplied its own validator in the request, the supplied validator supplied its own validator in the request, the supplied validator
might differ from the validator currently stored with the cache might differ from the validator currently stored with the cache
entry. In this case, the cache MAY use either validator in making entry. In this case, the cache MAY use either validator in making
its own request without affecting semantic transparency. its own request without affecting semantic transparency.
However, the choice of validator might affect performance. The However, the choice of validator might affect performance. The
best approach is for the intermediate cache to use its own best approach is for the intermediate cache to use its own
validator when making its request. If the server replies with 304 validator when making its request. If the server replies with 304
(Not Modified), then the cache can return its now validated copy (Not Modified), then the cache can return its now validated copy
to the client with a 200 (OK) response. If the server replies with to the client with a 200 (OK) response. If the server replies
a new entity and cache validator, however, the intermediate cache with a new entity and cache validator, however, the intermediate
can compare the returned validator with the one provided in the cache can compare the returned validator with the one provided in
client's request, using the strong comparison function. If the the client's request, using the strong comparison function. If
client's validator is equal to the origin server's, then the the client's validator is equal to the origin server's, then the
intermediate cache simply returns 304 (Not Modified). Otherwise, intermediate cache simply returns 304 (Not Modified). Otherwise,
it returns the new entity with a 200 (OK) response. it returns the new entity with a 200 (OK) response.
If a request includes the no-cache directive, it SHOULD NOT If a request includes the no-cache directive, it SHOULD NOT
include min-fresh, max-stale, or max-age. include min-fresh, max-stale, or max-age.
only-if-cached only-if-cached
In some cases, such as times of extremely poor network In some cases, such as times of extremely poor network
connectivity, a client may want a cache to return only those connectivity, a client may want a cache to return only those
responses that it currently has stored, and not to reload or responses that it currently has stored, and not to reload or
revalidate with the origin server. To do this, the client may revalidate with the origin server. To do this, the client may
include the only-if-cached directive in a request. If it receives include the only-if-cached directive in a request. If it receives
this directive, a cache SHOULD either respond using a cached entry this directive, a cache SHOULD either respond using a cached entry
that is consistent with the other constraints of the request, or that is consistent with the other constraints of the request, or
respond with a 504 (Gateway Timeout) status. However, if a group respond with a 504 (Gateway Timeout) status. However, if a group
of caches is being operated as a unified system with good internal of caches is being operated as a unified system with good internal
connectivity, such a request MAY be forwarded within that group of connectivity, such a request MAY be forwarded within that group of
skipping to change at page 115, line 40 skipping to change at page 118, line 31
revalidate directive, except that it does not apply to non-shared revalidate directive, except that it does not apply to non-shared
user agent caches. It can be used on a response to an user agent caches. It can be used on a response to an
authenticated request to permit the user's cache to store and authenticated request to permit the user's cache to store and
later return the response without needing to revalidate it (since later return the response without needing to revalidate it (since
it has already been authenticated once by that user), while still it has already been authenticated once by that user), while still
requiring proxies that service many users to revalidate each time requiring proxies that service many users to revalidate each time
(in order to make sure that each user has been authenticated). (in order to make sure that each user has been authenticated).
Note that such authenticated responses also need the public cache Note that such authenticated responses also need the public cache
control directive in order to allow them to be cached at all. control directive in order to allow them to be cached at all.
14.9.5 No-Transform Directive 14.9.5. No-Transform Directive
no-transform no-transform
Implementors of intermediate caches (proxies) have found it useful Implementors of intermediate caches (proxies) have found it useful
to convert the media type of certain entity bodies. A non- to convert the media type of certain entity bodies. A non-
transparent proxy might, for example, convert between image transparent proxy might, for example, convert between image
formats in order to save cache space or to reduce the amount of formats in order to save cache space or to reduce the amount of
traffic on a slow link. traffic on a slow link.
Serious operational problems occur, however, when these Serious operational problems occur, however, when these
transformations are applied to entity bodies intended for certain transformations are applied to entity bodies intended for certain
kinds of applications. For example, applications for medical kinds of applications. For example, applications for medical
imaging, scientific data analysis and those using end-to-end imaging, scientific data analysis and those using end-to-end
skipping to change at page 116, line 10 skipping to change at page 118, line 50
Serious operational problems occur, however, when these Serious operational problems occur, however, when these
transformations are applied to entity bodies intended for certain transformations are applied to entity bodies intended for certain
kinds of applications. For example, applications for medical kinds of applications. For example, applications for medical
imaging, scientific data analysis and those using end-to-end imaging, scientific data analysis and those using end-to-end
authentication, all depend on receiving an entity body that is bit authentication, all depend on receiving an entity body that is bit
for bit identical to the original entity-body. for bit identical to the original entity-body.
Therefore, if a message includes the no-transform directive, an Therefore, if a message includes the no-transform directive, an
intermediate cache or proxy MUST NOT change those headers that are intermediate cache or proxy MUST NOT change those headers that are
listed in section 13.5.2 as being subject to the no-transform listed in Section 13.5.2 as being subject to the no-transform
directive. This implies that the cache or proxy MUST NOT change directive. This implies that the cache or proxy MUST NOT change
any aspect of the entity-body that is specified by these headers, any aspect of the entity-body that is specified by these headers,
including the value of the entity-body itself. including the value of the entity-body itself.
14.9.6 Cache Control Extensions 14.9.6. Cache Control Extensions
The Cache-Control header field can be extended through the use of one The Cache-Control header field can be extended through the use of one
or more cache-extension tokens, each with an optional assigned value. or more cache-extension tokens, each with an optional assigned value.
Informational extensions (those which do not require a change in Informational extensions (those which do not require a change in
cache behavior) MAY be added without changing the semantics of other cache behavior) MAY be added without changing the semantics of other
directives. Behavioral extensions are designed to work by acting as directives. Behavioral extensions are designed to work by acting as
modifiers to the existing base of cache directives. Both the new modifiers to the existing base of cache directives. Both the new
directive and the standard directive are supplied, such that directive and the standard directive are supplied, such that
applications which do not understand the new directive will default applications which do not understand the new directive will default
to the behavior specified by the standard directive, and those that to the behavior specified by the standard directive, and those that
skipping to change at page 117, line 11 skipping to change at page 119, line 48
does not understand the community cache-extension, since it will also does not understand the community cache-extension, since it will also
see and understand the private directive and thus default to the safe see and understand the private directive and thus default to the safe
behavior. behavior.
Unrecognized cache-directives MUST be ignored; it is assumed that any Unrecognized cache-directives MUST be ignored; it is assumed that any
cache-directive likely to be unrecognized by an HTTP/1.1 cache will cache-directive likely to be unrecognized by an HTTP/1.1 cache will
be combined with standard directives (or the response's default be combined with standard directives (or the response's default
cacheability) such that the cache behavior will remain minimally cacheability) such that the cache behavior will remain minimally
correct even if the cache does not understand the extension(s). correct even if the cache does not understand the extension(s).
14.10 Connection 14.10. Connection
The Connection general-header field allows the sender to specify The Connection general-header field allows the sender to specify
options that are desired for that particular connection and MUST NOT options that are desired for that particular connection and MUST NOT
be communicated by proxies over further connections. be communicated by proxies over further connections.
The Connection header has the following grammar: The Connection header has the following grammar:
Connection = "Connection" ":" 1#(connection-token) Connection = "Connection" ":" 1#(connection-token)
connection-token = token connection-token = token
HTTP/1.1 proxies MUST parse the Connection header field before a HTTP/1.1 proxies MUST parse the Connection header field before a
message is forwarded and, for each connection-token in this field, message is forwarded and, for each connection-token in this field,
remove any header field(s) from the message with the same name as the remove any header field(s) from the message with the same name as the
connection-token. Connection options are signaled by the presence of connection-token. Connection options are signaled by the presence of
a connection-token in the Connection header field, not by any a connection-token in the Connection header field, not by any
corresponding additional header field(s), since the additional header corresponding additional header field(s), since the additional header
field may not be sent if there are no parameters associated with that field may not be sent if there are no parameters associated with that
connection option. connection option.
Message headers listed in the Connection header MUST NOT include Message headers listed in the Connection header MUST NOT include end-
end-to-end headers, such as Cache-Control. to-end headers, such as Cache-Control.
HTTP/1.1 defines the "close" connection option for the sender to HTTP/1.1 defines the "close" connection option for the sender to
signal that the connection will be closed after completion of the signal that the connection will be closed after completion of the
response. For example, response. For example,
Connection: close Connection: close
in either the request or the response header fields indicates that in either the request or the response header fields indicates that
the connection SHOULD NOT be considered `persistent' (section 8.1) the connection SHOULD NOT be considered `persistent' (Section 8.1)
after the current request/response is complete. after the current request/response is complete.
HTTP/1.1 applications that do not support persistent connections MUST HTTP/1.1 applications that do not support persistent connections MUST
include the "close" connection option in every message. include the "close" connection option in every message.
A system receiving an HTTP/1.0 (or lower-version) message that A system receiving an HTTP/1.0 (or lower-version) message that
includes a Connection header MUST, for each connection-token in this includes a Connection header MUST, for each connection-token in this
field, remove and ignore any header field(s) from the message with field, remove and ignore any header field(s) from the message with
the same name as the connection-token. This protects against mistaken the same name as the connection-token. This protects against
forwarding of such header fields by pre-HTTP/1.1 proxies. See section mistaken forwarding of such header fields by pre-HTTP/1.1 proxies.
19.6.2. See Appendix A.6.2.
14.11 Content-Encoding 14.11. Content-Encoding
The Content-Encoding entity-header field is used as a modifier to the The Content-Encoding entity-header field is used as a modifier to the
media-type. When present, its value indicates what additional content media-type. When present, its value indicates what additional
codings have been applied to the entity-body, and thus what decoding content codings have been applied to the entity-body, and thus what
mechanisms must be applied in order to obtain the media-type decoding mechanisms must be applied in order to obtain the media-type
referenced by the Content-Type header field. Content-Encoding is referenced by the Content-Type header field. Content-Encoding is
primarily used to allow a document to be compressed without losing primarily used to allow a document to be compressed without losing
the identity of its underlying media type. the identity of its underlying media type.
Content-Encoding = "Content-Encoding" ":" 1#content-coding Content-Encoding = "Content-Encoding" ":" 1#content-coding
Content codings are defined in section 3.5. An example of its use is Content codings are defined in Section 3.5. An example of its use is
Content-Encoding: gzip Content-Encoding: gzip
The content-coding is a characteristic of the entity identified by The content-coding is a characteristic of the entity identified by
the Request-URI. Typically, the entity-body is stored with this the Request-URI. Typically, the entity-body is stored with this
encoding and is only decoded before rendering or analogous usage. encoding and is only decoded before rendering or analogous usage.
However, a non-transparent proxy MAY modify the content-coding if the However, a non-transparent proxy MAY modify the content-coding if the
new coding is known to be acceptable to the recipient, unless the new coding is known to be acceptable to the recipient, unless the
"no-transform" cache-control directive is present in the message. "no-transform" cache-control directive is present in the message.
If the content-coding of an entity is not "identity", then the If the content-coding of an entity is not "identity", then the
response MUST include a Content-Encoding entity-header (section response MUST include a Content-Encoding entity-header
14.11) that lists the non-identity content-coding(s) used. (Section 14.11) that lists the non-identity content-coding(s) used.
If the content-coding of an entity in a request message is not If the content-coding of an entity in a request message is not
acceptable to the origin server, the server SHOULD respond with a acceptable to the origin server, the server SHOULD respond with a
status code of 415 (Unsupported Media Type). status code of 415 (Unsupported Media Type).
If multiple encodings have been applied to an entity, the content If multiple encodings have been applied to an entity, the content
codings MUST be listed in the order in which they were applied. codings MUST be listed in the order in which they were applied.
Additional information about the encoding parameters MAY be provided Additional information about the encoding parameters MAY be provided
by other entity-header fields not defined by this specification. by other entity-header fields not defined by this specification.
14.12 Content-Language 14.12. Content-Language
The Content-Language entity-header field describes the natural The Content-Language entity-header field describes the natural
language(s) of the intended audience for the enclosed entity. Note language(s) of the intended audience for the enclosed entity. Note
that this might not be equivalent to all the languages used within that this might not be equivalent to all the languages used within
the entity-body. the entity-body.
Content-Language = "Content-Language" ":" 1#language-tag Content-Language = "Content-Language" ":" 1#language-tag
Language tags are defined in section 3.10. The primary purpose of
Language tags are defined in Section 3.10. The primary purpose of
Content-Language is to allow a user to identify and differentiate Content-Language is to allow a user to identify and differentiate
entities according to the user's own preferred language. Thus, if the entities according to the user's own preferred language. Thus, if
body content is intended only for a Danish-literate audience, the the body content is intended only for a Danish-literate audience, the
appropriate field is appropriate field is
Content-Language: da Content-Language: da
If no Content-Language is specified, the default is that the content If no Content-Language is specified, the default is that the content
is intended for all language audiences. This might mean that the is intended for all language audiences. This might mean that the
sender does not consider it to be specific to any natural language, sender does not consider it to be specific to any natural language,
or that the sender does not know for which language it is intended. or that the sender does not know for which language it is intended.
Multiple languages MAY be listed for content that is intended for Multiple languages MAY be listed for content that is intended for
multiple audiences. For example, a rendition of the "Treaty of multiple audiences. For example, a rendition of the "Treaty of
Waitangi," presented simultaneously in the original Maori and English Waitangi," presented simultaneously in the original Maori and English
versions, would call for versions, would call for
Content-Language: mi, en Content-Language: mi, en
However, just because multiple languages are present within an entity However, just because multiple languages are present within an entity
does not mean that it is intended for multiple linguistic audiences. does not mean that it is intended for multiple linguistic audiences.
An example would be a beginner's language primer, such as "A First An example would be a beginner's language primer, such as "A First
Lesson in Latin," which is clearly intended to be used by an Lesson in Latin," which is clearly intended to be used by an English-
English-literate audience. In this case, the Content-Language would literate audience. In this case, the Content-Language would properly
properly only include "en". only include "en".
Content-Language MAY be applied to any media type -- it is not Content-Language MAY be applied to any media type -- it is not
limited to textual documents. limited to textual documents.
14.13 Content-Length 14.13. Content-Length
The Content-Length entity-header field indicates the size of the The Content-Length entity-header field indicates the size of the
entity-body, in decimal number of OCTETs, sent to the recipient or, entity-body, in decimal number of OCTETs, sent to the recipient or,
in the case of the HEAD method, the size of the entity-body that in the case of the HEAD method, the size of the entity-body that
would have been sent had the request been a GET. would have been sent had the request been a GET.
Content-Length = "Content-Length" ":" 1*DIGIT Content-Length = "Content-Length" ":" 1*DIGIT
An example is An example is
Content-Length: 3495 Content-Length: 3495
Applications SHOULD use this field to indicate the transfer-length of Applications SHOULD use this field to indicate the transfer-length of
the message-body, unless this is prohibited by the rules in section the message-body, unless this is prohibited by the rules in
4.4. Section 4.4.
Any Content-Length greater than or equal to zero is a valid value. Any Content-Length greater than or equal to zero is a valid value.
Section 4.4 describes how to determine the length of a message-body Section 4.4 describes how to determine the length of a message-body
if a Content-Length is not given. if a Content-Length is not given.
Note that the meaning of this field is significantly different from Note that the meaning of this field is significantly different from
the corresponding definition in MIME, where it is an optional field the corresponding definition in MIME, where it is an optional field
used within the "message/external-body" content-type. In HTTP, it used within the "message/external-body" content-type. In HTTP, it
SHOULD be sent whenever the message's length can be determined prior SHOULD be sent whenever the message's length can be determined prior
to being transferred, unless this is prohibited by the rules in to being transferred, unless this is prohibited by the rules in
section 4.4. Section 4.4.
14.14 Content-Location 14.14. Content-Location
The Content-Location entity-header field MAY be used to supply the The Content-Location entity-header field MAY be used to supply the
resource location for the entity enclosed in the message when that resource location for the entity enclosed in the message when that
entity is accessible from a location separate from the requested entity is accessible from a location separate from the requested
resource's URI. A server SHOULD provide a Content-Location for the resource's URI. A server SHOULD provide a Content-Location for the
variant corresponding to the response entity; especially in the case variant corresponding to the response entity; especially in the case
where a resource has multiple entities associated with it, and those where a resource has multiple entities associated with it, and those
entities actually have separate locations by which they might be entities actually have separate locations by which they might be
individually accessed, the server SHOULD provide a Content-Location individually accessed, the server SHOULD provide a Content-Location
for the particular variant which is returned. for the particular variant which is returned.
skipping to change at page 120, line 45 skipping to change at page 123, line 34
requested URI; it is only a statement of the location of the resource requested URI; it is only a statement of the location of the resource
corresponding to this particular entity at the time of the request. corresponding to this particular entity at the time of the request.
Future requests MAY specify the Content-Location URI as the request- Future requests MAY specify the Content-Location URI as the request-
URI if the desire is to identify the source of that particular URI if the desire is to identify the source of that particular
entity. entity.
A cache cannot assume that an entity with a Content-Location A cache cannot assume that an entity with a Content-Location
different from the URI used to retrieve it can be used to respond to different from the URI used to retrieve it can be used to respond to
later requests on that Content-Location URI. However, the Content- later requests on that Content-Location URI. However, the Content-
Location can be used to differentiate between multiple entities Location can be used to differentiate between multiple entities
retrieved from a single requested resource, as described in section retrieved from a single requested resource, as described in
13.6. Section 13.6.
If the Content-Location is a relative URI, the relative URI is If the Content-Location is a relative URI, the relative URI is
interpreted relative to the Request-URI. interpreted relative to the Request-URI.
The meaning of the Content-Location header in PUT or POST requests is The meaning of the Content-Location header in PUT or POST requests is
undefined; servers are free to ignore it in those cases. undefined; servers are free to ignore it in those cases.
14.15 Content-MD5 14.15. Content-MD5
The Content-MD5 entity-header field, as defined in RFC 1864 [23], is The Content-MD5 entity-header field, as defined in RFC 1864
an MD5 digest of the entity-body for the purpose of providing an [RFC1864], is an MD5 digest of the entity-body for the purpose of
end-to-end message integrity check (MIC) of the entity-body. (Note: a providing an end-to-end message integrity check (MIC) of the entity-
MIC is good for detecting accidental modification of the entity-body body. (Note: a MIC is good for detecting accidental modification of
in transit, but is not proof against malicious attacks.) the entity-body in transit, but is not proof against malicious
attacks.)
Content-MD5 = "Content-MD5" ":" md5-digest Content-MD5 = "Content-MD5" ":" md5-digest
md5-digest = <base64 of 128 bit MD5 digest as per RFC 1864> md5-digest = <base64 of 128 bit MD5 digest as per RFC 1864>
The Content-MD5 header field MAY be generated by an origin server or The Content-MD5 header field MAY be generated by an origin server or
client to function as an integrity check of the entity-body. Only client to function as an integrity check of the entity-body. Only
origin servers or clients MAY generate the Content-MD5 header field; origin servers or clients MAY generate the Content-MD5 header field;
proxies and gateways MUST NOT generate it, as this would defeat its proxies and gateways MUST NOT generate it, as this would defeat its
value as an end-to-end integrity check. Any recipient of the entity- value as an end-to-end integrity check. Any recipient of the entity-
body, including gateways and proxies, MAY check that the digest value body, including gateways and proxies, MAY check that the digest value
skipping to change at page 121, line 39 skipping to change at page 124, line 29
This has the result that the digest is computed on the octets of the This has the result that the digest is computed on the octets of the
entity-body exactly as, and in the order that, they would be sent if entity-body exactly as, and in the order that, they would be sent if
no transfer-encoding were being applied. no transfer-encoding were being applied.
HTTP extends RFC 1864 to permit the digest to be computed for MIME HTTP extends RFC 1864 to permit the digest to be computed for MIME
composite media-types (e.g., multipart/* and message/rfc822), but composite media-types (e.g., multipart/* and message/rfc822), but
this does not change how the digest is computed as defined in the this does not change how the digest is computed as defined in the
preceding paragraph. preceding paragraph.
There are several consequences of this. The entity-body for composite There are several consequences of this. The entity-body for
types MAY contain many body-parts, each with its own MIME and HTTP composite types MAY contain many body-parts, each with its own MIME
headers (including Content-MD5, Content-Transfer-Encoding, and and HTTP headers (including Content-MD5, Content-Transfer-Encoding,
Content-Encoding headers). If a body-part has a Content-Transfer- and Content-Encoding headers). If a body-part has a Content-
Encoding or Content-Encoding header, it is assumed that the content Transfer-Encoding or Content-Encoding header, it is assumed that the
of the body-part has had the encoding applied, and the body-part is content of the body-part has had the encoding applied, and the body-
included in the Content-MD5 digest as is -- i.e., after the part is included in the Content-MD5 digest as is -- i.e., after the
application. The Transfer-Encoding header field is not allowed within application. The Transfer-Encoding header field is not allowed
body-parts. within body-parts.
Conversion of all line breaks to CRLF MUST NOT be done before Conversion of all line breaks to CRLF MUST NOT be done before
computing or checking the digest: the line break convention used in computing or checking the digest: the line break convention used in
the text actually transmitted MUST be left unaltered when computing the text actually transmitted MUST be left unaltered when computing
the digest. the digest.
Note: while the definition of Content-MD5 is exactly the same for Note: while the definition of Content-MD5 is exactly the same for
HTTP as in RFC 1864 for MIME entity-bodies, there are several ways HTTP as in RFC 1864 for MIME entity-bodies, there are several ways
in which the application of Content-MD5 to HTTP entity-bodies in which the application of Content-MD5 to HTTP entity-bodies
differs from its application to MIME entity-bodies. One is that differs from its application to MIME entity-bodies. One is that
HTTP, unlike MIME, does not use Content-Transfer-Encoding, and HTTP, unlike MIME, does not use Content-Transfer-Encoding, and
does use Transfer-Encoding and Content-Encoding. Another is that does use Transfer-Encoding and Content-Encoding. Another is that
HTTP more frequently uses binary content types than MIME, so it is HTTP more frequently uses binary content types than MIME, so it is
worth noting that, in such cases, the byte order used to compute worth noting that, in such cases, the byte order used to compute
the digest is the transmission byte order defined for the type. the digest is the transmission byte order defined for the type.
Lastly, HTTP allows transmission of text types with any of several Lastly, HTTP allows transmission of text types with any of several
line break conventions and not just the canonical form using CRLF. line break conventions and not just the canonical form using CRLF.
14.16 Content-Range 14.16. Content-Range
The Content-Range entity-header is sent with a partial entity-body to The Content-Range entity-header is sent with a partial entity-body to
specify where in the full entity-body the partial body should be specify where in the full entity-body the partial body should be
applied. Range units are defined in section 3.12. applied. Range units are defined in Section 3.12.
Content-Range = "Content-Range" ":" content-range-spec Content-Range = "Content-Range" ":" content-range-spec
content-range-spec = byte-content-range-spec content-range-spec = byte-content-range-spec
byte-content-range-spec = bytes-unit SP byte-content-range-spec = bytes-unit SP
byte-range-resp-spec "/" byte-range-resp-spec "/"
( instance-length | "*" ) ( instance-length | "*" )
byte-range-resp-spec = (first-byte-pos "-" last-byte-pos) byte-range-resp-spec = (first-byte-pos "-" last-byte-pos)
| "*" | "*"
instance-length = 1*DIGIT instance-length = 1*DIGIT
The header SHOULD indicate the total length of the full entity-body, The header SHOULD indicate the total length of the full entity-body,
unless this length is unknown or difficult to determine. The asterisk unless this length is unknown or difficult to determine. The
"*" character means that the instance-length is unknown at the time asterisk "*" character means that the instance-length is unknown at
when the response was generated. the time when the response was generated.
Unlike byte-ranges-specifier values (see section 14.35.1), a byte- Unlike byte-ranges-specifier values (see Section 14.35.1), a byte-
range-resp-spec MUST only specify one range, and MUST contain range-resp-spec MUST only specify one range, and MUST contain
absolute byte positions for both the first and last byte of the absolute byte positions for both the first and last byte of the
range. range.
A byte-content-range-spec with a byte-range-resp-spec whose last- A byte-content-range-spec with a byte-range-resp-spec whose last-
byte-pos value is less than its first-byte-pos value, or whose byte-pos value is less than its first-byte-pos value, or whose
instance-length value is less than or equal to its last-byte-pos instance-length value is less than or equal to its last-byte-pos
value, is invalid. The recipient of an invalid byte-content-range- value, is invalid. The recipient of an invalid byte-content-range-
spec MUST ignore it and any content transferred along with it. spec MUST ignore it and any content transferred along with it.
A server sending a response with status code 416 (Requested range not A server sending a response with status code 416 (Requested range not
satisfiable) SHOULD include a Content-Range field with a byte-range- satisfiable) SHOULD include a Content-Range field with a byte-range-
resp-spec of "*". The instance-length specifies the current length of resp-spec of "*". The instance-length specifies the current length
the selected resource. A response with status code 206 (Partial of the selected resource. A response with status code 206 (Partial
Content) MUST NOT include a Content-Range field with a byte-range- Content) MUST NOT include a Content-Range field with a byte-range-
resp-spec of "*". resp-spec of "*".
Examples of byte-content-range-spec values, assuming that the entity Examples of byte-content-range-spec values, assuming that the entity
contains a total of 1234 bytes: contains a total of 1234 bytes:
. The first 500 bytes: o The first 500 bytes:
bytes 0-499/1234 bytes 0-499/1234
. The second 500 bytes: o The second 500 bytes:
bytes 500-999/1234 bytes 500-999/1234
. All except for the first 500 bytes: o All except for the first 500 bytes:
bytes 500-1233/1234 bytes 500-1233/1234
. The last 500 bytes: o The last 500 bytes:
bytes 734-1233/1234 bytes 734-1233/1234
When an HTTP message includes the content of a single range (for When an HTTP message includes the content of a single range (for
example, a response to a request for a single range, or to a request example, a response to a request for a single range, or to a request
for a set of ranges that overlap without any holes), this content is for a set of ranges that overlap without any holes), this content is
transmitted with a Content-Range header, and a Content-Length header transmitted with a Content-Range header, and a Content-Length header
showing the number of bytes actually transferred. For example, showing the number of bytes actually transferred. For example,
HTTP/1.1 206 Partial content HTTP/1.1 206 Partial content
Date: Wed, 15 Nov 1995 06:25:24 GMT Date: Wed, 15 Nov 1995 06:25:24 GMT
Last-Modified: Wed, 15 Nov 1995 04:58:08 GMT Last-Modified: Wed, 15 Nov 1995 04:58:08 GMT
Content-Range: bytes 21010-47021/47022 Content-Range: bytes 21010-47021/47022
Content-Length: 26012 Content-Length: 26012
Content-Type: image/gif Content-Type: image/gif
When an HTTP message includes the content of multiple ranges (for When an HTTP message includes the content of multiple ranges (for
example, a response to a request for multiple non-overlapping example, a response to a request for multiple non-overlapping
ranges), these are transmitted as a multipart message. The multipart ranges), these are transmitted as a multipart message. The multipart
media type used for this purpose is "multipart/byteranges" as defined media type used for this purpose is "multipart/byteranges" as defined
in appendix 19.2. See appendix 19.6.3 for a compatibility issue. in Appendix A.2. See Appendix A.6.3 for a compatibility issue.
A response to a request for a single range MUST NOT be sent using the A response to a request for a single range MUST NOT be sent using the
multipart/byteranges media type. A response to a request for multipart/byteranges media type. A response to a request for
multiple ranges, whose result is a single range, MAY be sent as a multiple ranges, whose result is a single range, MAY be sent as a
multipart/byteranges media type with one part. A client that cannot multipart/byteranges media type with one part. A client that cannot
decode a multipart/byteranges message MUST NOT ask for multiple decode a multipart/byteranges message MUST NOT ask for multiple byte-
byte-ranges in a single request. ranges in a single request.
When a client requests multiple byte-ranges in one request, the When a client requests multiple byte-ranges in one request, the
server SHOULD return them in the order that they appeared in the server SHOULD return them in the order that they appeared in the
request. request.
If the server ignores a byte-range-spec because it is syntactically If the server ignores a byte-range-spec because it is syntactically
invalid, the server SHOULD treat the request as if the invalid Range invalid, the server SHOULD treat the request as if the invalid Range
header field did not exist. (Normally, this means return a 200 header field did not exist. (Normally, this means return a 200
response containing the full entity). response containing the full entity).
If the server receives a request (other than one including an If- If the server receives a request (other than one including an If-
Range request-header field) with an unsatisfiable Range request- Range request-header field) with an unsatisfiable Range request-
header field (that is, all of whose byte-range-spec values have a header field (that is, all of whose byte-range-spec values have a
first-byte-pos value greater than the current length of the selected first-byte-pos value greater than the current length of the selected
resource), it SHOULD return a response code of 416 (Requested range resource), it SHOULD return a response code of 416 (Requested range
not satisfiable) (section 10.4.17). not satisfiable) (Section 10.4.17).
Note: clients cannot depend on servers to send a 416 (Requested Note: clients cannot depend on servers to send a 416 (Requested
range not satisfiable) response instead of a 200 (OK) response for range not satisfiable) response instead of a 200 (OK) response for
an unsatisfiable Range request-header, since not all servers an unsatisfiable Range request-header, since not all servers
implement this request-header. implement this request-header.
14.17 Content-Type 14.17. Content-Type
The Content-Type entity-header field indicates the media type of the The Content-Type entity-header field indicates the media type of the
entity-body sent to the recipient or, in the case of the HEAD method, entity-body sent to the recipient or, in the case of the HEAD method,
the media type that would have been sent had the request been a GET. the media type that would have been sent had the request been a GET.
Content-Type = "Content-Type" ":" media-type Content-Type = "Content-Type" ":" media-type
Media types are defined in section 3.7. An example of the field is Media types are defined in Section 3.7. An example of the field is
Content-Type: text/html; charset=ISO-8859-4 Content-Type: text/html; charset=ISO-8859-4
Further discussion of methods for identifying the media type of an Further discussion of methods for identifying the media type of an
entity is provided in section 7.2.1. entity is provided in Section 7.2.1.
14.18 Date 14.18. Date
The Date general-header field represents the date and time at which The Date general-header field represents the date and time at which
the message was originated, having the same semantics as orig-date in the message was originated, having the same semantics as orig-date in
RFC 822. The field value is an HTTP-date, as described in section RFC 822. The field value is an HTTP-date, as described in
3.3.1; it MUST be sent in RFC 1123 [8]-date format. Section 3.3.1; it MUST be sent in RFC 1123 [RFC1123]-date format.
Date = "Date" ":" HTTP-date Date = "Date" ":" HTTP-date
An example is An example is
Date: Tue, 15 Nov 1994 08:12:31 GMT Date: Tue, 15 Nov 1994 08:12:31 GMT
Origin servers MUST include a Date header field in all responses, Origin servers MUST include a Date header field in all responses,
except in these cases: except in these cases:
1. If the response status code is 100 (Continue) or 101 (Switching 1. If the response status code is 100 (Continue) or 101 (Switching
Protocols), the response MAY include a Date header field, at Protocols), the response MAY include a Date header field, at the
the server's option. server's option.
2. If the response status code conveys a server error, e.g. 500 2. If the response status code conveys a server error, e.g. 500
(Internal Server Error) or 503 (Service Unavailable), and it is (Internal Server Error) or 503 (Service Unavailable), and it is
inconvenient or impossible to generate a valid Date. inconvenient or impossible to generate a valid Date.
3. If the server does not have a clock that can provide a 3. If the server does not have a clock that can provide a reasonable
reasonable approximation of the current time, its responses approximation of the current time, its responses MUST NOT include
MUST NOT include a Date header field. In this case, the rules a Date header field. In this case, the rules in Section 14.18.1
in section 14.18.1 MUST be followed. MUST be followed.
A received message that does not have a Date header field MUST be A received message that does not have a Date header field MUST be
assigned one by the recipient if the message will be cached by that assigned one by the recipient if the message will be cached by that
recipient or gatewayed via a protocol which requires a Date. An HTTP recipient or gatewayed via a protocol which requires a Date. An HTTP
implementation without a clock MUST NOT cache responses without implementation without a clock MUST NOT cache responses without
revalidating them on every use. An HTTP cache, especially a shared revalidating them on every use. An HTTP cache, especially a shared
cache, SHOULD use a mechanism, such as NTP [28], to synchronize its cache, SHOULD use a mechanism, such as NTP [RFC1305], to synchronize
clock with a reliable external standard. its clock with a reliable external standard.
Clients SHOULD only send a Date header field in messages that include Clients SHOULD only send a Date header field in messages that include
an entity-body, as in the case of the PUT and POST requests, and even an entity-body, as in the case of the PUT and POST requests, and even
then it is optional. A client without a clock MUST NOT send a Date then it is optional. A client without a clock MUST NOT send a Date
header field in a request. header field in a request.
The HTTP-date sent in a Date header SHOULD NOT represent a date and The HTTP-date sent in a Date header SHOULD NOT represent a date and
time subsequent to the generation of the message. It SHOULD represent time subsequent to the generation of the message. It SHOULD
the best available approximation of the date and time of message represent the best available approximation of the date and time of
generation, unless the implementation has no means of generating a message generation, unless the implementation has no means of
reasonably accurate date and time. In theory, the date ought to generating a reasonably accurate date and time. In theory, the date
represent the moment just before the entity is generated. In ought to represent the moment just before the entity is generated.
practice, the date can be generated at any time during the message In practice, the date can be generated at any time during the message
origination without affecting its semantic value. origination without affecting its semantic value.
14.18.1 Clockless Origin Server Operation 14.18.1. Clockless Origin Server Operation
Some origin server implementations might not have a clock available. Some origin server implementations might not have a clock available.
An origin server without a clock MUST NOT assign Expires or Last- An origin server without a clock MUST NOT assign Expires or Last-
Modified values to a response, unless these values were associated Modified values to a response, unless these values were associated
with the resource by a system or user with a reliable clock. It MAY with the resource by a system or user with a reliable clock. It MAY
assign an Expires value that is known, at or before server assign an Expires value that is known, at or before server
configuration time, to be in the past (this allows "pre-expiration" configuration time, to be in the past (this allows "pre-expiration"
of responses without storing separate Expires values for each of responses without storing separate Expires values for each
resource). resource).
14.19 ETag 14.19. ETag
The ETag response-header field provides the current value of the The ETag response-header field provides the current value of the
entity tag for the requested variant. The headers used with entity entity tag for the requested variant. The headers used with entity
tags are described in sections 14.24, 14.26 and 14.44. The entity tag tags are described in sections 14.24, 14.26 and 14.44. The entity
MAY be used for comparison with other entities from the same resource tag MAY be used for comparison with other entities from the same
(see section 13.3.3). resource (see Section 13.3.3).
ETag = "ETag" ":" entity-tag ETag = "ETag" ":" entity-tag
Examples: Examples:
ETag: "xyzzy" ETag: "xyzzy"
ETag: W/"xyzzy" ETag: W/"xyzzy"
ETag: "" ETag: ""
14.20 Expect 14.20. Expect
The Expect request-header field is used to indicate that particular The Expect request-header field is used to indicate that particular
server behaviors are required by the client. server behaviors are required by the client.
Expect = "Expect" ":" 1#expectation Expect = "Expect" ":" 1#expectation
expectation = "100-continue" | expectation-extension expectation = "100-continue" | expectation-extension
expectation-extension = token [ "=" ( token | quoted-string ) expectation-extension = token [ "=" ( token | quoted-string )
*expect-params ] *expect-params ]
expect-params = ";" token [ "=" ( token | quoted-string ) ] expect-params = ";" token [ "=" ( token | quoted-string ) ]
skipping to change at page 127, line 14 skipping to change at page 130, line 5
The Expect mechanism is hop-by-hop: that is, an HTTP/1.1 proxy MUST The Expect mechanism is hop-by-hop: that is, an HTTP/1.1 proxy MUST
return a 417 (Expectation Failed) status if it receives a request return a 417 (Expectation Failed) status if it receives a request
with an expectation that it cannot meet. However, the Expect with an expectation that it cannot meet. However, the Expect
request-header itself is end-to-end; it MUST be forwarded if the request-header itself is end-to-end; it MUST be forwarded if the
request is forwarded. request is forwarded.
Many older HTTP/1.0 and HTTP/1.1 applications do not understand the Many older HTTP/1.0 and HTTP/1.1 applications do not understand the
Expect header. Expect header.
See section 8.2.3 for the use of the 100 (continue) status. See Section 8.2.3 for the use of the 100 (continue) status.
14.21 Expires 14.21. Expires
The Expires entity-header field gives the date/time after which the The Expires entity-header field gives the date/time after which the
response is considered stale. A stale cache entry may not normally be response is considered stale. A stale cache entry may not normally
returned by a cache (either a proxy cache or a user agent cache) be returned by a cache (either a proxy cache or a user agent cache)
unless it is first validated with the origin server (or with an unless it is first validated with the origin server (or with an
intermediate cache that has a fresh copy of the entity). See section intermediate cache that has a fresh copy of the entity). See
13.2 for further discussion of the expiration model. Section 13.2 for further discussion of the expiration model.
The presence of an Expires field does not imply that the original The presence of an Expires field does not imply that the original
resource will change or cease to exist at, before, or after that resource will change or cease to exist at, before, or after that
time. time.
The format is an absolute date and time as defined by HTTP-date in The format is an absolute date and time as defined by HTTP-date in
section 3.3.1; it MUST be in RFC 1123 date format: Section 3.3.1; it MUST be in RFC 1123 date format:
Expires = "Expires" ":" HTTP-date Expires = "Expires" ":" HTTP-date
An example of its use is An example of its use is
Expires: Thu, 01 Dec 1994 16:00:00 GMT Expires: Thu, 01 Dec 1994 16:00:00 GMT
Note: if a response includes a Cache-Control field with the max- Note: if a response includes a Cache-Control field with the max-
age directive (see section 14.9.3), that directive overrides the age directive (see Section 14.9.3), that directive overrides the
Expires field. Expires field.
HTTP/1.1 clients and caches MUST treat other invalid date formats, HTTP/1.1 clients and caches MUST treat other invalid date formats,
especially including the value "0", as in the past (i.e., "already especially including the value "0", as in the past (i.e., "already
expired"). expired").
To mark a response as "already expired," an origin server sends an To mark a response as "already expired," an origin server sends an
Expires date that is equal to the Date header value. (See the rules Expires date that is equal to the Date header value. (See the rules
for expiration calculations in section 13.2.4.) for expiration calculations in Section 13.2.4.)
To mark a response as "never expires," an origin server sends an To mark a response as "never expires," an origin server sends an
Expires date approximately one year from the time the response is Expires date approximately one year from the time the response is
sent. HTTP/1.1 servers SHOULD NOT send Expires dates more than one sent. HTTP/1.1 servers SHOULD NOT send Expires dates more than one
year in the future. year in the future.
The presence of an Expires header field with a date value of some The presence of an Expires header field with a date value of some
time in the future on a response that otherwise would by default be time in the future on a response that otherwise would by default be
non-cacheable indicates that the response is cacheable, unless non-cacheable indicates that the response is cacheable, unless
indicated otherwise by a Cache-Control header field (section 14.9). indicated otherwise by a Cache-Control header field (Section 14.9).
14.22 From 14.22. From
The From request-header field, if given, SHOULD contain an Internet The From request-header field, if given, SHOULD contain an Internet
e-mail address for the human user who controls the requesting user e-mail address for the human user who controls the requesting user
agent. The address SHOULD be machine-usable, as defined by "mailbox" agent. The address SHOULD be machine-usable, as defined by "mailbox"
in RFC 822 [9] as updated by RFC 1123 [8]: in RFC 822 [RFC822] as updated by RFC 1123 [RFC1123]:
From = "From" ":" mailbox From = "From" ":" mailbox
An example is: An example is:
From: webmaster@w3.org From: webmaster@w3.org
This header field MAY be used for logging purposes and as a means for This header field MAY be used for logging purposes and as a means for
identifying the source of invalid or unwanted requests. It SHOULD NOT identifying the source of invalid or unwanted requests. It SHOULD
be used as an insecure form of access protection. The interpretation NOT be used as an insecure form of access protection. The
of this field is that the request is being performed on behalf of the interpretation of this field is that the request is being performed
person given, who accepts responsibility for the method performed. In on behalf of the person given, who accepts responsibility for the
particular, robot agents SHOULD include this header so that the method performed. In particular, robot agents SHOULD include this
person responsible for running the robot can be contacted if problems header so that the person responsible for running the robot can be
occur on the receiving end. contacted if problems occur on the receiving end.
The Internet e-mail address in this field MAY be separate from the The Internet e-mail address in this field MAY be separate from the
Internet host which issued the request. For example, when a request Internet host which issued the request. For example, when a request
is passed through a proxy the original issuer's address SHOULD be is passed through a proxy the original issuer's address SHOULD be
used. used.
The client SHOULD NOT send the From header field without the user's The client SHOULD NOT send the From header field without the user's
approval, as it might conflict with the user's privacy interests or approval, as it might conflict with the user's privacy interests or
their site's security policy. It is strongly recommended that the their site's security policy. It is strongly recommended that the
user be able to disable, enable, and modify the value of this field user be able to disable, enable, and modify the value of this field
at any time prior to a request. at any time prior to a request.
14.23 Host 14.23. Host
The Host request-header field specifies the Internet host and port The Host request-header field specifies the Internet host and port
number of the resource being requested, as obtained from the original number of the resource being requested, as obtained from the original
URI given by the user or referring resource (generally an HTTP URL, URI given by the user or referring resource (generally an HTTP URL,
as described in section 3.2.2). The Host field value MUST represent as described in Section 3.2.2). The Host field value MUST represent
the naming authority of the origin server or gateway given by the the naming authority of the origin server or gateway given by the
original URL. This allows the origin server or gateway to original URL. This allows the origin server or gateway to
differentiate between internally-ambiguous URLs, such as the root "/" differentiate between internally-ambiguous URLs, such as the root "/"
URL of a server for multiple host names on a single IP address. URL of a server for multiple host names on a single IP address.
Host = "Host" ":" host [ ":" port ] ; Section 3.2.2 Host = "Host" ":" host [ ":" port ] ; Section 3.2.2
A "host" without any trailing port information implies the default A "host" without any trailing port information implies the default
port for the service requested (e.g., "80" for an HTTP URL). For port for the service requested (e.g., "80" for an HTTP URL). For
example, a request on the origin server for example, a request on the origin server for
skipping to change at page 129, line 30 skipping to change at page 132, line 20
A client MUST include a Host header field in all HTTP/1.1 request A client MUST include a Host header field in all HTTP/1.1 request
messages . If the requested URI does not include an Internet host messages . If the requested URI does not include an Internet host
name for the service being requested, then the Host header field MUST name for the service being requested, then the Host header field MUST
be given with an empty value. An HTTP/1.1 proxy MUST ensure that any be given with an empty value. An HTTP/1.1 proxy MUST ensure that any
request message it forwards does contain an appropriate Host header request message it forwards does contain an appropriate Host header
field that identifies the service being requested by the proxy. All field that identifies the service being requested by the proxy. All
Internet-based HTTP/1.1 servers MUST respond with a 400 (Bad Request) Internet-based HTTP/1.1 servers MUST respond with a 400 (Bad Request)
status code to any HTTP/1.1 request message which lacks a Host header status code to any HTTP/1.1 request message which lacks a Host header
field. field.
See sections 5.2 and 19.6.1.1 for other requirements relating to See sections 5.2 and A.6.1.1 for other requirements relating to Host.
Host.
14.24 If-Match 14.24. If-Match
The If-Match request-header field is used with a method to make it The If-Match request-header field is used with a method to make it
conditional. A client that has one or more entities previously conditional. A client that has one or more entities previously
obtained from the resource can verify that one of those entities is obtained from the resource can verify that one of those entities is
current by including a list of their associated entity tags in the current by including a list of their associated entity tags in the
If-Match header field. Entity tags are defined in section 3.11. The If-Match header field. Entity tags are defined in Section 3.11. The
purpose of this feature is to allow efficient updates of cached purpose of this feature is to allow efficient updates of cached
information with a minimum amount of transaction overhead. It is also information with a minimum amount of transaction overhead. It is
used, on updating requests, to prevent inadvertent modification of also used, on updating requests, to prevent inadvertent modification
the wrong version of a resource. As a special case, the value "*" of the wrong version of a resource. As a special case, the value "*"
matches any current entity of the resource. matches any current entity of the resource.
If-Match = "If-Match" ":" ( "*" | 1#entity-tag ) If-Match = "If-Match" ":" ( "*" | 1#entity-tag )
If any of the entity tags match the entity tag of the entity that If any of the entity tags match the entity tag of the entity that
would have been returned in the response to a similar GET request would have been returned in the response to a similar GET request
(without the If-Match header) on that resource, or if "*" is given (without the If-Match header) on that resource, or if "*" is given
and any current entity exists for that resource, then the server MAY and any current entity exists for that resource, then the server MAY
perform the requested method as if the If-Match header field did not perform the requested method as if the If-Match header field did not
exist. exist.
A server MUST use the strong comparison function (see section 13.3.3) A server MUST use the strong comparison function (see Section 13.3.3)
to compare the entity tags in If-Match. to compare the entity tags in If-Match.
If none of the entity tags match, or if "*" is given and no current If none of the entity tags match, or if "*" is given and no current
entity exists, the server MUST NOT perform the requested method, and entity exists, the server MUST NOT perform the requested method, and
MUST return a 412 (Precondition Failed) response. This behavior is MUST return a 412 (Precondition Failed) response. This behavior is
most useful when the client wants to prevent an updating method, such most useful when the client wants to prevent an updating method, such
as PUT, from modifying a resource that has changed since the client as PUT, from modifying a resource that has changed since the client
last retrieved it. last retrieved it.
If the request would, without the If-Match header field, result in If the request would, without the If-Match header field, result in
anything other than a 2xx or 412 status, then the If-Match header anything other than a 2xx or 412 status, then the If-Match header
MUST be ignored. MUST be ignored.
The meaning of "If-Match: *" is that the method SHOULD be performed The meaning of "If-Match: *" is that the method SHOULD be performed
if the representation selected by the origin server (or by a cache, if the representation selected by the origin server (or by a cache,
possibly using the Vary mechanism, see section 14.44) exists, and possibly using the Vary mechanism, see Section 14.44) exists, and
MUST NOT be performed if the representation does not exist. MUST NOT be performed if the representation does not exist.
A request intended to update a resource (e.g., a PUT) MAY include an A request intended to update a resource (e.g., a PUT) MAY include an
If-Match header field to signal that the request method MUST NOT be If-Match header field to signal that the request method MUST NOT be
applied if the entity corresponding to the If-Match value (a single applied if the entity corresponding to the If-Match value (a single
entity tag) is no longer a representation of that resource. This entity tag) is no longer a representation of that resource. This
allows the user to indicate that they do not wish the request to be allows the user to indicate that they do not wish the request to be
successful if the resource has been changed without their knowledge. successful if the resource has been changed without their knowledge.
Examples: Examples:
If-Match: "xyzzy" If-Match: "xyzzy"
If-Match: "xyzzy", "r2d2xxxx", "c3piozzzz" If-Match: "xyzzy", "r2d2xxxx", "c3piozzzz"
If-Match: * If-Match: *
The result of a request having both an If-Match header field and The result of a request having both an If-Match header field and
either an If-None-Match or an If-Modified-Since header fields is either an If-None-Match or an If-Modified-Since header fields is
undefined by this specification. undefined by this specification.
14.25 If-Modified-Since 14.25. If-Modified-Since
The If-Modified-Since request-header field is used with a method to The If-Modified-Since request-header field is used with a method to
make it conditional: if the requested variant has not been modified make it conditional: if the requested variant has not been modified
since the time specified in this field, an entity will not be since the time specified in this field, an entity will not be
returned from the server; instead, a 304 (not modified) response will returned from the server; instead, a 304 (not modified) response will
be returned without any message-body. be returned without any message-body.
If-Modified-Since = "If-Modified-Since" ":" HTTP-date If-Modified-Since = "If-Modified-Since" ":" HTTP-date
An example of the field is: An example of the field is:
If-Modified-Since: Sat, 29 Oct 1994 19:43:31 GMT If-Modified-Since: Sat, 29 Oct 1994 19:43:31 GMT
A GET method with an If-Modified-Since header and no Range header A GET method with an If-Modified-Since header and no Range header
requests that the identified entity be transferred only if it has requests that the identified entity be transferred only if it has
been modified since the date given by the If-Modified-Since header. been modified since the date given by the If-Modified-Since header.
The algorithm for determining this includes the following cases: The algorithm for determining this includes the following cases:
a) If the request would normally result in anything other than a 1. If the request would normally result in anything other than a 200
200 (OK) status, or if the passed If-Modified-Since date is (OK) status, or if the passed If-Modified-Since date is invalid,
invalid, the response is exactly the same as for a normal GET. the response is exactly the same as for a normal GET. A date
A date which is later than the server's current time is which is later than the server's current time is invalid.
invalid.
b) If the variant has been modified since the If-Modified-Since 2. If the variant has been modified since the If-Modified-Since
date, the response is exactly the same as for a normal GET. date, the response is exactly the same as for a normal GET.
c) If the variant has not been modified since a valid If- 3. If the variant has not been modified since a valid If-Modified-
Modified-Since date, the server SHOULD return a 304 (Not Since date, the server SHOULD return a 304 (Not Modified)
Modified) response. response.
The purpose of this feature is to allow efficient updates of cached The purpose of this feature is to allow efficient updates of cached
information with a minimum amount of transaction overhead. information with a minimum amount of transaction overhead.
Note: The Range request-header field modifies the meaning of If- Note: The Range request-header field modifies the meaning of If-
Modified-Since; see section 14.35 for full details. Modified-Since; see Section 14.35 for full details.
Note: If-Modified-Since times are interpreted by the server, whose Note: If-Modified-Since times are interpreted by the server, whose
clock might not be synchronized with the client. clock might not be synchronized with the client.
Note: When handling an If-Modified-Since header field, some Note: When handling an If-Modified-Since header field, some
servers will use an exact date comparison function, rather than a servers will use an exact date comparison function, rather than a
less-than function, for deciding whether to send a 304 (Not less-than function, for deciding whether to send a 304 (Not
Modified) response. To get best results when sending an If- Modified) response. To get best results when sending an If-
Modified-Since header field for cache validation, clients are Modified-Since header field for cache validation, clients are
advised to use the exact date string received in a previous Last- advised to use the exact date string received in a previous Last-
skipping to change at page 132, line 14 skipping to change at page 135, line 5
possibility of clock-skew-related problems if the If-Modified- possibility of clock-skew-related problems if the If-Modified-
Since date is derived from the client's clock without correction Since date is derived from the client's clock without correction
to the server's clock. Corrections for different time bases to the server's clock. Corrections for different time bases
between client and server are at best approximate due to network between client and server are at best approximate due to network
latency. latency.
The result of a request having both an If-Modified-Since header field The result of a request having both an If-Modified-Since header field
and either an If-Match or an If-Unmodified-Since header fields is and either an If-Match or an If-Unmodified-Since header fields is
undefined by this specification. undefined by this specification.
14.26 If-None-Match 14.26. If-None-Match
The If-None-Match request-header field is used with a method to make The If-None-Match request-header field is used with a method to make
it conditional. A client that has one or more entities previously it conditional. A client that has one or more entities previously
obtained from the resource can verify that none of those entities is obtained from the resource can verify that none of those entities is
current by including a list of their associated entity tags in the current by including a list of their associated entity tags in the
If-None-Match header field. The purpose of this feature is to allow If-None-Match header field. The purpose of this feature is to allow
efficient updates of cached information with a minimum amount of efficient updates of cached information with a minimum amount of
transaction overhead. It is also used to prevent a method (e.g. PUT) transaction overhead. It is also used to prevent a method (e.g.
from inadvertently modifying an existing resource when the client PUT) from inadvertently modifying an existing resource when the
believes that the resource does not exist. client believes that the resource does not exist.
As a special case, the value "*" matches any current entity of the As a special case, the value "*" matches any current entity of the
resource. resource.
If-None-Match = "If-None-Match" ":" ( "*" | 1#entity-tag ) If-None-Match = "If-None-Match" ":" ( "*" | 1#entity-tag )
If any of the entity tags match the entity tag of the entity that If any of the entity tags match the entity tag of the entity that
would have been returned in the response to a similar GET request would have been returned in the response to a similar GET request
(without the If-None-Match header) on that resource, or if "*" is (without the If-None-Match header) on that resource, or if "*" is
given and any current entity exists for that resource, then the given and any current entity exists for that resource, then the
server MUST NOT perform the requested method, unless required to do server MUST NOT perform the requested method, unless required to do
so because the resource's modification date fails to match that so because the resource's modification date fails to match that
supplied in an If-Modified-Since header field in the request. supplied in an If-Modified-Since header field in the request.
Instead, if the request method was GET or HEAD, the server SHOULD Instead, if the request method was GET or HEAD, the server SHOULD
respond with a 304 (Not Modified) response, including the cache- respond with a 304 (Not Modified) response, including the cache-
related header fields (particularly ETag) of one of the entities that related header fields (particularly ETag) of one of the entities that
matched. For all other request methods, the server MUST respond with matched. For all other request methods, the server MUST respond with
a status of 412 (Precondition Failed). a status of 412 (Precondition Failed).
See section 13.3.3 for rules on how to determine if two entities tags See Section 13.3.3 for rules on how to determine if two entities tags
match. The weak comparison function can only be used with GET or HEAD match. The weak comparison function can only be used with GET or
requests. HEAD requests.
If none of the entity tags match, then the server MAY perform the If none of the entity tags match, then the server MAY perform the
requested method as if the If-None-Match header field did not exist, requested method as if the If-None-Match header field did not exist,
but MUST also ignore any If-Modified-Since header field(s) in the but MUST also ignore any If-Modified-Since header field(s) in the
request. That is, if no entity tags match, then the server MUST NOT request. That is, if no entity tags match, then the server MUST NOT
return a 304 (Not Modified) response. return a 304 (Not Modified) response.
If the request would, without the If-None-Match header field, result If the request would, without the If-None-Match header field, result
in anything other than a 2xx or 304 status, then the If-None-Match in anything other than a 2xx or 304 status, then the If-None-Match
header MUST be ignored. (See section 13.3.4 for a discussion of header MUST be ignored. (See Section 13.3.4 for a discussion of
server behavior when both If-Modified-Since and If-None-Match appear server behavior when both If-Modified-Since and If-None-Match appear
in the same request.) in the same request.)
The meaning of "If-None-Match: *" is that the method MUST NOT be The meaning of "If-None-Match: *" is that the method MUST NOT be
performed if the representation selected by the origin server (or by performed if the representation selected by the origin server (or by
a cache, possibly using the Vary mechanism, see section 14.44) a cache, possibly using the Vary mechanism, see Section 14.44)
exists, and SHOULD be performed if the representation does not exist. exists, and SHOULD be performed if the representation does not exist.
This feature is intended to be useful in preventing races between PUT This feature is intended to be useful in preventing races between PUT
operations. operations.
Examples: Examples:
If-None-Match: "xyzzy" If-None-Match: "xyzzy"
If-None-Match: W/"xyzzy" If-None-Match: W/"xyzzy"
If-None-Match: "xyzzy", "r2d2xxxx", "c3piozzzz" If-None-Match: "xyzzy", "r2d2xxxx", "c3piozzzz"
If-None-Match: W/"xyzzy", W/"r2d2xxxx", W/"c3piozzzz" If-None-Match: W/"xyzzy", W/"r2d2xxxx", W/"c3piozzzz"
If-None-Match: * If-None-Match: *
The result of a request having both an If-None-Match header field and The result of a request having both an If-None-Match header field and
either an If-Match or an If-Unmodified-Since header fields is either an If-Match or an If-Unmodified-Since header fields is
undefined by this specification. undefined by this specification.
14.27 If-Range 14.27. If-Range
If a client has a partial copy of an entity in its cache, and wishes If a client has a partial copy of an entity in its cache, and wishes
to have an up-to-date copy of the entire entity in its cache, it to have an up-to-date copy of the entire entity in its cache, it
could use the Range request-header with a conditional GET (using could use the Range request-header with a conditional GET (using
either or both of If-Unmodified-Since and If-Match.) However, if the either or both of If-Unmodified-Since and If-Match.) However, if the
condition fails because the entity has been modified, the client condition fails because the entity has been modified, the client
would then have to make a second request to obtain the entire current would then have to make a second request to obtain the entire current
entity-body. entity-body.
The If-Range header allows a client to "short-circuit" the second The If-Range header allows a client to "short-circuit" the second
request. Informally, its meaning is `if the entity is unchanged, send request. Informally, its meaning is `if the entity is unchanged,
me the part(s) that I am missing; otherwise, send me the entire new send me the part(s) that I am missing; otherwise, send me the entire
entity'. new entity'.
If-Range = "If-Range" ":" ( entity-tag | HTTP-date ) If-Range = "If-Range" ":" ( entity-tag | HTTP-date )
If the client has no entity tag for an entity, but does have a Last- If the client has no entity tag for an entity, but does have a Last-
Modified date, it MAY use that date in an If-Range header. (The Modified date, it MAY use that date in an If-Range header. (The
server can distinguish between a valid HTTP-date and any form of server can distinguish between a valid HTTP-date and any form of
entity-tag by examining no more than two characters.) The If-Range entity-tag by examining no more than two characters.) The If-Range
header SHOULD only be used together with a Range header, and MUST be header SHOULD only be used together with a Range header, and MUST be
ignored if the request does not include a Range header, or if the ignored if the request does not include a Range header, or if the
server does not support the sub-range operation. server does not support the sub-range operation.
If the entity tag given in the If-Range header matches the current If the entity tag given in the If-Range header matches the current
entity tag for the entity, then the server SHOULD provide the entity tag for the entity, then the server SHOULD provide the
skipping to change at page 134, line 18 skipping to change at page 137, line 5
header SHOULD only be used together with a Range header, and MUST be header SHOULD only be used together with a Range header, and MUST be
ignored if the request does not include a Range header, or if the ignored if the request does not include a Range header, or if the
server does not support the sub-range operation. server does not support the sub-range operation.
If the entity tag given in the If-Range header matches the current If the entity tag given in the If-Range header matches the current
entity tag for the entity, then the server SHOULD provide the entity tag for the entity, then the server SHOULD provide the
specified sub-range of the entity using a 206 (Partial content) specified sub-range of the entity using a 206 (Partial content)
response. If the entity tag does not match, then the server SHOULD response. If the entity tag does not match, then the server SHOULD
return the entire entity using a 200 (OK) response. return the entire entity using a 200 (OK) response.
14.28 If-Unmodified-Since 14.28. If-Unmodified-Since
The If-Unmodified-Since request-header field is used with a method to The If-Unmodified-Since request-header field is used with a method to
make it conditional. If the requested resource has not been modified make it conditional. If the requested resource has not been modified
since the time specified in this field, the server SHOULD perform the since the time specified in this field, the server SHOULD perform the
requested operation as if the If-Unmodified-Since header were not requested operation as if the If-Unmodified-Since header were not
present. present.
If the requested variant has been modified since the specified time, If the requested variant has been modified since the specified time,
the server MUST NOT perform the requested operation, and MUST return the server MUST NOT perform the requested operation, and MUST return
a 412 (Precondition Failed). a 412 (Precondition Failed).
skipping to change at page 134, line 46 skipping to change at page 137, line 33
If the request normally (i.e., without the If-Unmodified-Since If the request normally (i.e., without the If-Unmodified-Since
header) would result in anything other than a 2xx or 412 status, the header) would result in anything other than a 2xx or 412 status, the
If-Unmodified-Since header SHOULD be ignored. If-Unmodified-Since header SHOULD be ignored.
If the specified date is invalid, the header is ignored. If the specified date is invalid, the header is ignored.
The result of a request having both an If-Unmodified-Since header The result of a request having both an If-Unmodified-Since header
field and either an If-None-Match or an If-Modified-Since header field and either an If-None-Match or an If-Modified-Since header
fields is undefined by this specification. fields is undefined by this specification.
14.29 Last-Modified 14.29. Last-Modified
The Last-Modified entity-header field indicates the date and time at The Last-Modified entity-header field indicates the date and time at
which the origin server believes the variant was last modified. which the origin server believes the variant was last modified.
Last-Modified = "Last-Modified" ":" HTTP-date Last-Modified = "Last-Modified" ":" HTTP-date
An example of its use is An example of its use is
Last-Modified: Tue, 15 Nov 1994 12:45:26 GMT Last-Modified: Tue, 15 Nov 1994 12:45:26 GMT
The exact meaning of this header field depends on the implementation The exact meaning of this header field depends on the implementation
of the origin server and the nature of the original resource. For of the origin server and the nature of the original resource. For
files, it may be just the file system last-modified time. For files, it may be just the file system last-modified time. For
entities with dynamically included parts, it may be the most recent entities with dynamically included parts, it may be the most recent
of the set of last-modify times for its component parts. For database of the set of last-modify times for its component parts. For
gateways, it may be the last-update time stamp of the record. For database gateways, it may be the last-update time stamp of the
virtual objects, it may be the last time the internal state changed. record. For virtual objects, it may be the last time the internal
state changed.
An origin server MUST NOT send a Last-Modified date which is later An origin server MUST NOT send a Last-Modified date which is later
than the server's time of message origination. In such cases, where than the server's time of message origination. In such cases, where
the resource's last modification would indicate some time in the the resource's last modification would indicate some time in the
future, the server MUST replace that date with the message future, the server MUST replace that date with the message
origination date. origination date.
An origin server SHOULD obtain the Last-Modified value of the entity An origin server SHOULD obtain the Last-Modified value of the entity
as close as possible to the time that it generates the Date value of as close as possible to the time that it generates the Date value of
its response. This allows a recipient to make an accurate assessment its response. This allows a recipient to make an accurate assessment
of the entity's modification time, especially if the entity changes of the entity's modification time, especially if the entity changes
near the time that the response is generated. near the time that the response is generated.
HTTP/1.1 servers SHOULD send Last-Modified whenever feasible. HTTP/1.1 servers SHOULD send Last-Modified whenever feasible.
14.30 Location 14.30. Location
The Location response-header field is used to redirect the recipient The Location response-header field is used to redirect the recipient
to a location other than the Request-URI for completion of the to a location other than the Request-URI for completion of the
request or identification of a new resource. For 201 (Created) request or identification of a new resource. For 201 (Created)
responses, the Location is that of the new resource which was created responses, the Location is that of the new resource which was created
by the request. For 3xx responses, the location SHOULD indicate the by the request. For 3xx responses, the location SHOULD indicate the
server's preferred URI for automatic redirection to the resource. The server's preferred URI for automatic redirection to the resource.
field value consists of a single absolute URI. The field value consists of a single absolute URI.
Location = "Location" ":" absoluteURI Location = "Location" ":" absoluteURI
An example is: An example is:
Location: http://www.w3.org/pub/WWW/People.html Location: http://www.w3.org/pub/WWW/People.html
Note: The Content-Location header field (section 14.14) differs Note: The Content-Location header field (Section 14.14) differs
from Location in that the Content-Location identifies the original from Location in that the Content-Location identifies the original
location of the entity enclosed in the request. It is therefore location of the entity enclosed in the request. It is therefore
possible for a response to contain header fields for both Location possible for a response to contain header fields for both Location
and Content-Location. Also see section 13.10 for cache and Content-Location. Also see Section 13.10 for cache
requirements of some methods. requirements of some methods.
14.31 Max-Forwards 14.31. Max-Forwards
The Max-Forwards request-header field provides a mechanism with the The Max-Forwards request-header field provides a mechanism with the
TRACE (section 9.8) and OPTIONS (section 9.2) methods to limit the TRACE (Section 9.8) and OPTIONS (Section 9.2) methods to limit the
number of proxies or gateways that can forward the request to the number of proxies or gateways that can forward the request to the
next inbound server. This can be useful when the client is attempting next inbound server. This can be useful when the client is
to trace a request chain which appears to be failing or looping in attempting to trace a request chain which appears to be failing or
mid-chain. looping in mid-chain.
Max-Forwards = "Max-Forwards" ":" 1*DIGIT Max-Forwards = "Max-Forwards" ":" 1*DIGIT
The Max-Forwards value is a decimal integer indicating the remaining The Max-Forwards value is a decimal integer indicating the remaining
number of times this request message may be forwarded. number of times this request message may be forwarded.
Each proxy or gateway recipient of a TRACE or OPTIONS request Each proxy or gateway recipient of a TRACE or OPTIONS request
containing a Max-Forwards header field MUST check and update its containing a Max-Forwards header field MUST check and update its
value prior to forwarding the request. If the received value is zero value prior to forwarding the request. If the received value is zero
(0), the recipient MUST NOT forward the request; instead, it MUST (0), the recipient MUST NOT forward the request; instead, it MUST
respond as the final recipient. If the received Max-Forwards value is respond as the final recipient. If the received Max-Forwards value
greater than zero, then the forwarded message MUST contain an updated is greater than zero, then the forwarded message MUST contain an
Max-Forwards field with a value decremented by one (1). updated Max-Forwards field with a value decremented by one (1).
The Max-Forwards header field MAY be ignored for all other methods The Max-Forwards header field MAY be ignored for all other methods
defined by this specification and for any extension methods for which defined by this specification and for any extension methods for which
it is not explicitly referred to as part of that method definition. it is not explicitly referred to as part of that method definition.
14.32 Pragma 14.32. Pragma
The Pragma general-header field is used to include implementation- The Pragma general-header field is used to include implementation-
specific directives that might apply to any recipient along the specific directives that might apply to any recipient along the
request/response chain. All pragma directives specify optional request/response chain. All pragma directives specify optional
behavior from the viewpoint of the protocol; however, some systems behavior from the viewpoint of the protocol; however, some systems
MAY require that behavior be consistent with the directives. MAY require that behavior be consistent with the directives.
Pragma = "Pragma" ":" 1#pragma-directive Pragma = "Pragma" ":" 1#pragma-directive
pragma-directive = "no-cache" | extension-pragma pragma-directive = "no-cache" | extension-pragma
extension-pragma = token [ "=" ( token | quoted-string ) ] extension-pragma = token [ "=" ( token | quoted-string ) ]
When the no-cache directive is present in a request message, an When the no-cache directive is present in a request message, an
application SHOULD forward the request toward the origin server even application SHOULD forward the request toward the origin server even
if it has a cached copy of what is being requested. This pragma if it has a cached copy of what is being requested. This pragma
directive has the same semantics as the no-cache cache-directive (see directive has the same semantics as the no-cache cache-directive (see
section 14.9) and is defined here for backward compatibility with Section 14.9) and is defined here for backward compatibility with
HTTP/1.0. Clients SHOULD include both header fields when a no-cache HTTP/1.0. Clients SHOULD include both header fields when a no-cache
request is sent to a server not known to be HTTP/1.1 compliant. request is sent to a server not known to be HTTP/1.1 compliant.
Pragma directives MUST be passed through by a proxy or gateway Pragma directives MUST be passed through by a proxy or gateway
application, regardless of their significance to that application, application, regardless of their significance to that application,
since the directives might be applicable to all recipients along the since the directives might be applicable to all recipients along the
request/response chain. It is not possible to specify a pragma for a request/response chain. It is not possible to specify a pragma for a
specific recipient; however, any pragma directive not relevant to a specific recipient; however, any pragma directive not relevant to a
recipient SHOULD be ignored by that recipient. recipient SHOULD be ignored by that recipient.
HTTP/1.1 caches SHOULD treat "Pragma: no-cache" as if the client had HTTP/1.1 caches SHOULD treat "Pragma: no-cache" as if the client had
sent "Cache-Control: no-cache". No new Pragma directives will be sent "Cache-Control: no-cache". No new Pragma directives will be
defined in HTTP. defined in HTTP.
Note: because the meaning of "Pragma: no-cache as a response Note: because the meaning of "Pragma: no-cache as a response
header field is not actually specified, it does not provide a header field is not actually specified, it does not provide a
reliable replacement for "Cache-Control: no-cache" in a response reliable replacement for "Cache-Control: no-cache" in a response
14.33 Proxy-Authenticate 14.33. Proxy-Authenticate
The Proxy-Authenticate response-header field MUST be included as part The Proxy-Authenticate response-header field MUST be included as part
of a 407 (Proxy Authentication Required) response. The field value of a 407 (Proxy Authentication Required) response. The field value
consists of a challenge that indicates the authentication scheme and consists of a challenge that indicates the authentication scheme and
parameters applicable to the proxy for this Request-URI. parameters applicable to the proxy for this Request-URI.
Proxy-Authenticate = "Proxy-Authenticate" ":" 1#challenge Proxy-Authenticate = "Proxy-Authenticate" ":" 1#challenge
The HTTP access authentication process is described in "HTTP The HTTP access authentication process is described in "HTTP
Authentication: Basic and Digest Access Authentication" [43]. Unlike Authentication: Basic and Digest Access Authentication" [RFC2617].
WWW-Authenticate, the Proxy-Authenticate header field applies only to Unlike WWW-Authenticate, the Proxy-Authenticate header field applies
the current connection and SHOULD NOT be passed on to downstream only to the current connection and SHOULD NOT be passed on to
clients. However, an intermediate proxy might need to obtain its own downstream clients. However, an intermediate proxy might need to
credentials by requesting them from the downstream client, which in obtain its own credentials by requesting them from the downstream
some circumstances will appear as if the proxy is forwarding the client, which in some circumstances will appear as if the proxy is
Proxy-Authenticate header field. forwarding the Proxy-Authenticate header field.
14.34 Proxy-Authorization 14.34. Proxy-Authorization
The Proxy-Authorization request-header field allows the client to The Proxy-Authorization request-header field allows the client to
identify itself (or its user) to a proxy which requires identify itself (or its user) to a proxy which requires
authentication. The Proxy-Authorization field value consists of authentication. The Proxy-Authorization field value consists of
credentials containing the authentication information of the user credentials containing the authentication information of the user
agent for the proxy and/or realm of the resource being requested. agent for the proxy and/or realm of the resource being requested.
Proxy-Authorization = "Proxy-Authorization" ":" credentials Proxy-Authorization = "Proxy-Authorization" ":" credentials
The HTTP access authentication process is described in "HTTP The HTTP access authentication process is described in "HTTP
Authentication: Basic and Digest Access Authentication" [43] . Unlike Authentication: Basic and Digest Access Authentication" [RFC2617].
Authorization, the Proxy-Authorization header field applies only to Unlike Authorization, the Proxy-Authorization header field applies
the next outbound proxy that demanded authentication using the Proxy- only to the next outbound proxy that demanded authentication using
Authenticate field. When multiple proxies are used in a chain, the the Proxy-Authenticate field. When multiple proxies are used in a
Proxy-Authorization header field is consumed by the first outbound chain, the Proxy-Authorization header field is consumed by the first
proxy that was expecting to receive credentials. A proxy MAY relay outbound proxy that was expecting to receive credentials. A proxy
the credentials from the client request to the next proxy if that is MAY relay the credentials from the client request to the next proxy
the mechanism by which the proxies cooperatively authenticate a given if that is the mechanism by which the proxies cooperatively
request. authenticate a given request.
14.35 Range 14.35. Range
14.35.1 Byte Ranges 14.35.1. Byte Ranges
Since all HTTP entities are represented in HTTP messages as sequences Since all HTTP entities are represented in HTTP messages as sequences
of bytes, the concept of a byte range is meaningful for any HTTP of bytes, the concept of a byte range is meaningful for any HTTP
entity. (However, not all clients and servers need to support byte- entity. (However, not all clients and servers need to support byte-
range operations.) range operations.)
Byte range specifications in HTTP apply to the sequence of bytes in Byte range specifications in HTTP apply to the sequence of bytes in
the entity-body (not necessarily the same as the message-body). the entity-body (not necessarily the same as the message-body).
A byte range operation MAY specify a single range of bytes, or a set A byte range operation MAY specify a single range of bytes, or a set
skipping to change at page 139, line 8 skipping to change at page 141, line 42
or equal to the current length of the entity-body, last-byte-pos is or equal to the current length of the entity-body, last-byte-pos is
taken to be equal to one less than the current length of the entity- taken to be equal to one less than the current length of the entity-
body in bytes. body in bytes.
By its choice of last-byte-pos, a client can limit the number of By its choice of last-byte-pos, a client can limit the number of
bytes retrieved without knowing the size of the entity. bytes retrieved without knowing the size of the entity.
suffix-byte-range-spec = "-" suffix-length suffix-byte-range-spec = "-" suffix-length
suffix-length = 1*DIGIT suffix-length = 1*DIGIT
A suffix-byte-range-spec is used to specify the suffix of the A suffix-byte-range-spec is used to specify the suffix of the entity-
entity-body, of a length given by the suffix-length value. (That is, body, of a length given by the suffix-length value. (That is, this
this form specifies the last N bytes of an entity-body.) If the form specifies the last N bytes of an entity-body.) If the entity is
entity is shorter than the specified suffix-length, the entire shorter than the specified suffix-length, the entire entity-body is
entity-body is used. used.
If a syntactically valid byte-range-set includes at least one byte- If a syntactically valid byte-range-set includes at least one byte-
range-spec whose first-byte-pos is less than the current length of range-spec whose first-byte-pos is less than the current length of
the entity-body, or at least one suffix-byte-range-spec with a non- the entity-body, or at least one suffix-byte-range-spec with a non-
zero suffix-length, then the byte-range-set is satisfiable. zero suffix-length, then the byte-range-set is satisfiable.
Otherwise, the byte-range-set is unsatisfiable. If the byte-range-set
is unsatisfiable, the server SHOULD return a response with a status Otherwise, the byte-range-set is unsatisfiable. If the byte-range-
of 416 (Requested range not satisfiable). Otherwise, the server set is unsatisfiable, the server SHOULD return a response with a
SHOULD return a response with a status of 206 (Partial Content) status of 416 (Requested range not satisfiable). Otherwise, the
containing the satisfiable ranges of the entity-body. server SHOULD return a response with a status of 206 (Partial
Content) containing the satisfiable ranges of the entity-body.
Examples of byte-ranges-specifier values (assuming an entity-body of Examples of byte-ranges-specifier values (assuming an entity-body of
length 10000): length 10000):
- The first 500 bytes (byte offsets 0-499, inclusive): bytes=0- o The first 500 bytes (byte offsets 0-499, inclusive): bytes=0-499
499
- The second 500 bytes (byte offsets 500-999, inclusive): o The second 500 bytes (byte offsets 500-999, inclusive): bytes=500-
bytes=500-999 999
- The final 500 bytes (byte offsets 9500-9999, inclusive): o The final 500 bytes (byte offsets 9500-9999, inclusive): bytes=-
bytes=-500 500
- Or bytes=9500- o Or bytes=9500-
- The first and last bytes only (bytes 0 and 9999): bytes=0-0,-1 o The first and last bytes only (bytes 0 and 9999): bytes=0-0,-1
- Several legal but not canonical specifications of the second 500 o Several legal but not canonical specifications of the second 500
bytes (byte offsets 500-999, inclusive): bytes (byte offsets 500-999, inclusive):
bytes=500-600,601-999 bytes=500-600,601-999
bytes=500-700,601-999 bytes=500-700,601-999
14.35.2 Range Retrieval Requests 14.35.2. Range Retrieval Requests
HTTP retrieval requests using conditional or unconditional GET HTTP retrieval requests using conditional or unconditional GET
methods MAY request one or more sub-ranges of the entity, instead of methods MAY request one or more sub-ranges of the entity, instead of
the entire entity, using the Range request header, which applies to the entire entity, using the Range request header, which applies to
the entity returned as the result of the request: the entity returned as the result of the request:
Range = "Range" ":" ranges-specifier Range = "Range" ":" ranges-specifier
A server MAY ignore the Range header. However, HTTP/1.1 origin A server MAY ignore the Range header. However, HTTP/1.1 origin
servers and intermediate caches ought to support byte ranges when servers and intermediate caches ought to support byte ranges when
possible, since Range supports efficient recovery from partially possible, since Range supports efficient recovery from partially
failed transfers, and supports efficient partial retrieval of large failed transfers, and supports efficient partial retrieval of large
entities. entities.
If the server supports the Range header and the specified range or If the server supports the Range header and the specified range or
ranges are appropriate for the entity: ranges are appropriate for the entity:
- The presence of a Range header in an unconditional GET modifies o The presence of a Range header in an unconditional GET modifies
what is returned if the GET is otherwise successful. In other what is returned if the GET is otherwise successful. In other
words, the response carries a status code of 206 (Partial words, the response carries a status code of 206 (Partial Content)
Content) instead of 200 (OK). instead of 200 (OK).
- The presence of a Range header in a conditional GET (a request o The presence of a Range header in a conditional GET (a request
using one or both of If-Modified-Since and If-None-Match, or using one or both of If-Modified-Since and If-None-Match, or one
one or both of If-Unmodified-Since and If-Match) modifies what or both of If-Unmodified-Since and If-Match) modifies what is
is returned if the GET is otherwise successful and the returned if the GET is otherwise successful and the condition is
condition is true. It does not affect the 304 (Not Modified) true. It does not affect the 304 (Not Modified) response returned
response returned if the conditional is false. if the conditional is false.
In some cases, it might be more appropriate to use the If-Range In some cases, it might be more appropriate to use the If-Range
header (see section 14.27) in addition to the Range header. header (see Section 14.27) in addition to the Range header.
If a proxy that supports ranges receives a Range request, forwards If a proxy that supports ranges receives a Range request, forwards
the request to an inbound server, and receives an entire entity in the request to an inbound server, and receives an entire entity in
reply, it SHOULD only return the requested range to its client. It reply, it SHOULD only return the requested range to its client. It
SHOULD store the entire received response in its cache if that is SHOULD store the entire received response in its cache if that is
consistent with its cache allocation policies. consistent with its cache allocation policies.
14.36 Referer 14.36. Referer
The Referer[sic] request-header field allows the client to specify, The Referer[sic] request-header field allows the client to specify,
for the server's benefit, the address (URI) of the resource from for the server's benefit, the address (URI) of the resource from
which the Request-URI was obtained (the "referrer", although the which the Request-URI was obtained (the "referrer", although the
header field is misspelled.) The Referer request-header allows a header field is misspelled.) The Referer request-header allows a
server to generate lists of back-links to resources for interest, server to generate lists of back-links to resources for interest,
logging, optimized caching, etc. It also allows obsolete or mistyped logging, optimized caching, etc. It also allows obsolete or mistyped
links to be traced for maintenance. The Referer field MUST NOT be links to be traced for maintenance. The Referer field MUST NOT be
sent if the Request-URI was obtained from a source that does not have sent if the Request-URI was obtained from a source that does not have
its own URI, such as input from the user keyboard. its own URI, such as input from the user keyboard.
skipping to change at page 141, line 4 skipping to change at page 143, line 38
logging, optimized caching, etc. It also allows obsolete or mistyped logging, optimized caching, etc. It also allows obsolete or mistyped
links to be traced for maintenance. The Referer field MUST NOT be links to be traced for maintenance. The Referer field MUST NOT be
sent if the Request-URI was obtained from a source that does not have sent if the Request-URI was obtained from a source that does not have
its own URI, such as input from the user keyboard. its own URI, such as input from the user keyboard.
Referer = "Referer" ":" ( absoluteURI | relativeURI ) Referer = "Referer" ":" ( absoluteURI | relativeURI )
Example: Example:
Referer: http://www.w3.org/hypertext/DataSources/Overview.html Referer: http://www.w3.org/hypertext/DataSources/Overview.html
If the field value is a relative URI, it SHOULD be interpreted If the field value is a relative URI, it SHOULD be interpreted
relative to the Request-URI. The URI MUST NOT include a fragment. See relative to the Request-URI. The URI MUST NOT include a fragment.
section 15.1.3 for security considerations. See Section 15.1.3 for security considerations.
14.37 Retry-After 14.37. Retry-After
The Retry-After response-header field can be used with a 503 (Service The Retry-After response-header field can be used with a 503 (Service
Unavailable) response to indicate how long the service is expected to Unavailable) response to indicate how long the service is expected to
be unavailable to the requesting client. This field MAY also be used be unavailable to the requesting client. This field MAY also be used
with any 3xx (Redirection) response to indicate the minimum time the with any 3xx (Redirection) response to indicate the minimum time the
user-agent is asked wait before issuing the redirected request. The user-agent is asked wait before issuing the redirected request. The
value of this field can be either an HTTP-date or an integer number value of this field can be either an HTTP-date or an integer number
of seconds (in decimal) after the time of the response. of seconds (in decimal) after the time of the response.
Retry-After = "Retry-After" ":" ( HTTP-date | delta-seconds ) Retry-After = "Retry-After" ":" ( HTTP-date | delta-seconds )
Two examples of its use are Two examples of its use are
Retry-After: Fri, 31 Dec 1999 23:59:59 GMT Retry-After: Fri, 31 Dec 1999 23:59:59 GMT
Retry-After: 120 Retry-After: 120
In the latter example, the delay is 2 minutes. In the latter example, the delay is 2 minutes.
14.38 Server 14.38. Server
The Server response-header field contains information about the The Server response-header field contains information about the
software used by the origin server to handle the request. The field software used by the origin server to handle the request. The field
can contain multiple product tokens (section 3.8) and comments can contain multiple product tokens (Section 3.8) and comments
identifying the server and any significant subproducts. The product identifying the server and any significant subproducts. The product
tokens are listed in order of their significance for identifying the tokens are listed in order of their significance for identifying the
application. application.
Server = "Server" ":" 1*( product | comment ) Server = "Server" ":" 1*( product | comment )
Example: Example:
Server: CERN/3.0 libwww/2.17 Server: CERN/3.0 libwww/2.17
If the response is being forwarded through a proxy, the proxy If the response is being forwarded through a proxy, the proxy
application MUST NOT modify the Server response-header. Instead, it application MUST NOT modify the Server response-header. Instead, it
SHOULD include a Via field (as described in section 14.45). SHOULD include a Via field (as described in Section 14.45).
Note: Revealing the specific software version of the server might Note: Revealing the specific software version of the server might
allow the server machine to become more vulnerable to attacks allow the server machine to become more vulnerable to attacks
against software that is known to contain security holes. Server against software that is known to contain security holes. Server
implementors are encouraged to make this field a configurable implementors are encouraged to make this field a configurable
option. option.
14.39 TE 14.39. TE
The TE request-header field indicates what extension transfer-codings The TE request-header field indicates what extension transfer-codings
it is willing to accept in the response and whether or not it is it is willing to accept in the response and whether or not it is
willing to accept trailer fields in a chunked transfer-coding. Its willing to accept trailer fields in a chunked transfer-coding. Its
value may consist of the keyword "trailers" and/or a comma-separated value may consist of the keyword "trailers" and/or a comma-separated
list of extension transfer-coding names with optional accept list of extension transfer-coding names with optional accept
parameters (as described in section 3.6). parameters (as described in Section 3.6).
TE = "TE" ":" #( t-codings ) TE = "TE" ":" #( t-codings )
t-codings = "trailers" | ( transfer-extension [ accept-params ] ) t-codings = "trailers" | ( transfer-extension [ accept-params ] )
The presence of the keyword "trailers" indicates that the client is The presence of the keyword "trailers" indicates that the client is
willing to accept trailer fields in a chunked transfer-coding, as willing to accept trailer fields in a chunked transfer-coding, as
defined in section 3.6.1. This keyword is reserved for use with defined in Section 3.6.1. This keyword is reserved for use with
transfer-coding values even though it does not itself represent a transfer-coding values even though it does not itself represent a
transfer-coding. transfer-coding.
Examples of its use are: Examples of its use are:
TE: deflate TE: deflate
TE: TE:
TE: trailers, deflate;q=0.5 TE: trailers, deflate;q=0.5
The TE header field only applies to the immediate connection. The TE header field only applies to the immediate connection.
Therefore, the keyword MUST be supplied within a Connection header Therefore, the keyword MUST be supplied within a Connection header
field (section 14.10) whenever TE is present in an HTTP/1.1 message. field (Section 14.10) whenever TE is present in an HTTP/1.1 message.
A server tests whether a transfer-coding is acceptable, according to A server tests whether a transfer-coding is acceptable, according to
a TE field, using these rules: a TE field, using these rules:
1. The "chunked" transfer-coding is always acceptable. If the 1. The "chunked" transfer-coding is always acceptable. If the
keyword "trailers" is listed, the client indicates that it is keyword "trailers" is listed, the client indicates that it is
willing to accept trailer fields in the chunked response on willing to accept trailer fields in the chunked response on
behalf of itself and any downstream clients. The implication is behalf of itself and any downstream clients. The implication is
that, if given, the client is stating that either all that, if given, the client is stating that either all downstream
downstream clients are willing to accept trailer fields in the clients are willing to accept trailer fields in the forwarded
forwarded response, or that it will attempt to buffer the response, or that it will attempt to buffer the response on
response on behalf of downstream recipients. behalf of downstream recipients.
Note: HTTP/1.1 does not define any means to limit the size of a Note: HTTP/1.1 does not define any means to limit the size of a
chunked response such that a client can be assured of buffering chunked response such that a client can be assured of buffering
the entire response. the entire response.
2. If the transfer-coding being tested is one of the transfer- 2. If the transfer-coding being tested is one of the transfer-
codings listed in the TE field, then it is acceptable unless it codings listed in the TE field, then it is acceptable unless it
is accompanied by a qvalue of 0. (As defined in section 3.9, a is accompanied by a qvalue of 0. (As defined in Section 3.9, a
qvalue of 0 means "not acceptable.") qvalue of 0 means "not acceptable.")
3. If multiple transfer-codings are acceptable, then the
acceptable transfer-coding with the highest non-zero qvalue is 3. If multiple transfer-codings are acceptable, then the acceptable
preferred. The "chunked" transfer-coding always has a qvalue transfer-coding with the highest non-zero qvalue is preferred.
of 1. The "chunked" transfer-coding always has a qvalue of 1.
If the TE field-value is empty or if no TE field is present, the only If the TE field-value is empty or if no TE field is present, the only
transfer-coding is "chunked". A message with no transfer-coding is transfer-coding is "chunked". A message with no transfer-coding is
always acceptable. always acceptable.
14.40 Trailer 14.40. Trailer
The Trailer general field value indicates that the given set of The Trailer general field value indicates that the given set of
header fields is present in the trailer of a message encoded with header fields is present in the trailer of a message encoded with
chunked transfer-coding. chunked transfer-coding.
Trailer = "Trailer" ":" 1#field-name Trailer = "Trailer" ":" 1#field-name
An HTTP/1.1 message SHOULD include a Trailer header field in a An HTTP/1.1 message SHOULD include a Trailer header field in a
message using chunked transfer-coding with a non-empty trailer. Doing message using chunked transfer-coding with a non-empty trailer.
so allows the recipient to know which header fields to expect in the Doing so allows the recipient to know which header fields to expect
trailer. in the trailer.
If no Trailer header field is present, the trailer SHOULD NOT include If no Trailer header field is present, the trailer SHOULD NOT include
any header fields. See section 3.6.1 for restrictions on the use of any header fields. See Section 3.6.1 for restrictions on the use of
trailer fields in a "chunked" transfer-coding. trailer fields in a "chunked" transfer-coding.
Message header fields listed in the Trailer header field MUST NOT Message header fields listed in the Trailer header field MUST NOT
include the following header fields: include the following header fields:
. Transfer-Encoding o Transfer-Encoding
. Content-Length o Content-Length
. Trailer o Trailer
14.41 Transfer-Encoding 14.41. Transfer-Encoding
The Transfer-Encoding general-header field indicates what (if any) The Transfer-Encoding general-header field indicates what (if any)
type of transformation has been applied to the message body in order type of transformation has been applied to the message body in order
to safely transfer it between the sender and the recipient. This to safely transfer it between the sender and the recipient. This
differs from the content-coding in that the transfer-coding is a differs from the content-coding in that the transfer-coding is a
property of the message, not of the entity. property of the message, not of the entity.
Transfer-Encoding = "Transfer-Encoding" ":" 1#transfer-coding Transfer-Encoding = "Transfer-Encoding" ":" 1#transfer-coding
Transfer-codings are defined in section 3.6. An example is: Transfer-codings are defined in Section 3.6. An example is:
Transfer-Encoding: chunked Transfer-Encoding: chunked
If multiple encodings have been applied to an entity, the transfer- If multiple encodings have been applied to an entity, the transfer-
codings MUST be listed in the order in which they were applied. codings MUST be listed in the order in which they were applied.
Additional information about the encoding parameters MAY be provided Additional information about the encoding parameters MAY be provided
by other entity-header fields not defined by this specification. by other entity-header fields not defined by this specification.
Many older HTTP/1.0 applications do not understand the Transfer- Many older HTTP/1.0 applications do not understand the Transfer-
Encoding header. Encoding header.
14.42 Upgrade 14.42. Upgrade
The Upgrade general-header allows the client to specify what The Upgrade general-header allows the client to specify what
additional communication protocols it supports and would like to use additional communication protocols it supports and would like to use
if the server finds it appropriate to switch protocols. The server if the server finds it appropriate to switch protocols. The server
MUST use the Upgrade header field within a 101 (Switching Protocols) MUST use the Upgrade header field within a 101 (Switching Protocols)
response to indicate which protocol(s) are being switched. response to indicate which protocol(s) are being switched.
Upgrade = "Upgrade" ":" 1#product Upgrade = "Upgrade" ":" 1#product
For example, For example,
Upgrade: HTTP/2.0, SHTTP/1.3, IRC/6.9, RTA/x11 Upgrade: HTTP/2.0, SHTTP/1.3, IRC/6.9, RTA/x11
The Upgrade header field is intended to provide a simple mechanism The Upgrade header field is intended to provide a simple mechanism
for transition from HTTP/1.1 to some other, incompatible protocol. It for transition from HTTP/1.1 to some other, incompatible protocol.
does so by allowing the client to advertise its desire to use another It does so by allowing the client to advertise its desire to use
protocol, such as a later version of HTTP with a higher major version another protocol, such as a later version of HTTP with a higher major
number, even though the current request has been made using HTTP/1.1. version number, even though the current request has been made using
This eases the difficult transition between incompatible protocols by HTTP/1.1. This eases the difficult transition between incompatible
allowing the client to initiate a request in the more commonly protocols by allowing the client to initiate a request in the more
supported protocol while indicating to the server that it would like commonly supported protocol while indicating to the server that it
to use a "better" protocol if available (where "better" is determined would like to use a "better" protocol if available (where "better" is
by the server, possibly according to the nature of the method and/or determined by the server, possibly according to the nature of the
resource being requested). method and/or resource being requested).
The Upgrade header field only applies to switching application-layer The Upgrade header field only applies to switching application-layer
protocols upon the existing transport-layer connection. Upgrade protocols upon the existing transport-layer connection. Upgrade
cannot be used to insist on a protocol change; its acceptance and use cannot be used to insist on a protocol change; its acceptance and use
by the server is optional. The capabilities and nature of the by the server is optional. The capabilities and nature of the
application-layer communication after the protocol change is entirely application-layer communication after the protocol change is entirely
dependent upon the new protocol chosen, although the first action dependent upon the new protocol chosen, although the first action
after changing the protocol MUST be a response to the initial HTTP after changing the protocol MUST be a response to the initial HTTP
request containing the Upgrade header field. request containing the Upgrade header field.
The Upgrade header field only applies to the immediate connection. The Upgrade header field only applies to the immediate connection.
Therefore, the upgrade keyword MUST be supplied within a Connection Therefore, the upgrade keyword MUST be supplied within a Connection
header field (section 14.10) whenever Upgrade is present in an header field (Section 14.10) whenever Upgrade is present in an
HTTP/1.1 message. HTTP/1.1 message.
The Upgrade header field cannot be used to indicate a switch to a The Upgrade header field cannot be used to indicate a switch to a
protocol on a different connection. For that purpose, it is more protocol on a different connection. For that purpose, it is more
appropriate to use a 301, 302, 303, or 305 redirection response. appropriate to use a 301, 302, 303, or 305 redirection response.
This specification only defines the protocol name "HTTP" for use by This specification only defines the protocol name "HTTP" for use by
the family of Hypertext Transfer Protocols, as defined by the HTTP the family of Hypertext Transfer Protocols, as defined by the HTTP
version rules of section 3.1 and future updates to this version rules of Section 3.1 and future updates to this
specification. Any token can be used as a protocol name; however, it specification. Any token can be used as a protocol name; however, it
will only be useful if both the client and server associate the name will only be useful if both the client and server associate the name
with the same protocol. with the same protocol.
14.43 User-Agent 14.43. User-Agent
The User-Agent request-header field contains information about the The User-Agent request-header field contains information about the
user agent originating the request. This is for statistical purposes, user agent originating the request. This is for statistical
the tracing of protocol violations, and automated recognition of user purposes, the tracing of protocol violations, and automated
agents for the sake of tailoring responses to avoid particular user recognition of user agents for the sake of tailoring responses to
agent limitations. User agents SHOULD include this field with avoid particular user agent limitations. User agents SHOULD include
requests. The field can contain multiple product tokens (section 3.8) this field with requests. The field can contain multiple product
and comments identifying the agent and any subproducts which form a tokens (Section 3.8) and comments identifying the agent and any
significant part of the user agent. By convention, the product tokens subproducts which form a significant part of the user agent. By
are listed in order of their significance for identifying the convention, the product tokens are listed in order of their
application. significance for identifying the application.
User-Agent = "User-Agent" ":" 1*( product | comment ) User-Agent = "User-Agent" ":" 1*( product | comment )
Example: Example:
User-Agent: CERN-LineMode/2.15 libwww/2.17b3 User-Agent: CERN-LineMode/2.15 libwww/2.17b3
14.44 Vary 14.44. Vary
The Vary field value indicates the set of request-header fields that The Vary field value indicates the set of request-header fields that
fully determines, while the response is fresh, whether a cache is fully determines, while the response is fresh, whether a cache is
permitted to use the response to reply to a subsequent request permitted to use the response to reply to a subsequent request
without revalidation. For uncacheable or stale responses, the Vary without revalidation. For uncacheable or stale responses, the Vary
field value advises the user agent about the criteria that were used field value advises the user agent about the criteria that were used
to select the representation. A Vary field value of "*" implies that to select the representation. A Vary field value of "*" implies that
a cache cannot determine from the request headers of a subsequent a cache cannot determine from the request headers of a subsequent
request whether this response is the appropriate representation. See request whether this response is the appropriate representation. See
section 13.6 for use of the Vary header field by caches. Section 13.6 for use of the Vary header field by caches.
Vary = "Vary" ":" ( "*" | 1#field-name ) Vary = "Vary" ":" ( "*" | 1#field-name )
An HTTP/1.1 server SHOULD include a Vary header field with any An HTTP/1.1 server SHOULD include a Vary header field with any
cacheable response that is subject to server-driven negotiation. cacheable response that is subject to server-driven negotiation.
Doing so allows a cache to properly interpret future requests on that Doing so allows a cache to properly interpret future requests on that
resource and informs the user agent about the presence of negotiation resource and informs the user agent about the presence of negotiation
on that resource. A server MAY include a Vary header field with a on that resource. A server MAY include a Vary header field with a
non-cacheable response that is subject to server-driven negotiation, non-cacheable response that is subject to server-driven negotiation,
since this might provide the user agent with useful information about since this might provide the user agent with useful information about
skipping to change at page 146, line 18 skipping to change at page 149, line 7
response. response.
A Vary field value consisting of a list of field-names signals that A Vary field value consisting of a list of field-names signals that
the representation selected for the response is based on a selection the representation selected for the response is based on a selection
algorithm which considers ONLY the listed request-header field values algorithm which considers ONLY the listed request-header field values
in selecting the most appropriate representation. A cache MAY assume in selecting the most appropriate representation. A cache MAY assume
that the same selection will be made for future requests with the that the same selection will be made for future requests with the
same values for the listed field names, for the duration of time for same values for the listed field names, for the duration of time for
which the response is fresh. which the response is fresh.
The field-names given are not limited to the set of standard The field-names given are not limited to the set of standard request-
request-header fields defined by this specification. Field names are header fields defined by this specification. Field names are case-
case-insensitive. insensitive.
A Vary field value of "*" signals that unspecified parameters not A Vary field value of "*" signals that unspecified parameters not
limited to the request-headers (e.g., the network address of the limited to the request-headers (e.g., the network address of the
client), play a role in the selection of the response representation. client), play a role in the selection of the response representation.
The "*" value MUST NOT be generated by a proxy server; it may only be The "*" value MUST NOT be generated by a proxy server; it may only be
generated by an origin server. generated by an origin server.
14.45 Via 14.45. Via
The Via general-header field MUST be used by gateways and proxies to The Via general-header field MUST be used by gateways and proxies to
indicate the intermediate protocols and recipients between the user indicate the intermediate protocols and recipients between the user
agent and the server on requests, and between the origin server and agent and the server on requests, and between the origin server and
the client on responses. It is analogous to the "Received" field of the client on responses. It is analogous to the "Received" field of
RFC 822 [9] and is intended to be used for tracking message forwards, RFC 822 [RFC822] and is intended to be used for tracking message
avoiding request loops, and identifying the protocol capabilities of forwards, avoiding request loops, and identifying the protocol
all senders along the request/response chain. capabilities of all senders along the request/response chain.
Via = "Via" ":" 1#( received-protocol received-by [ comment ] ) Via = "Via" ":" 1#( received-protocol received-by [ comment ] )
received-protocol = [ protocol-name "/" ] protocol-version received-protocol = [ protocol-name "/" ] protocol-version
protocol-name = token protocol-name = token
protocol-version = token protocol-version = token
received-by = ( host [ ":" port ] ) | pseudonym received-by = ( host [ ":" port ] ) | pseudonym
pseudonym = token pseudonym = token
The received-protocol indicates the protocol version of the message The received-protocol indicates the protocol version of the message
received by the server or client along each segment of the received by the server or client along each segment of the request/
request/response chain. The received-protocol version is appended to response chain. The received-protocol version is appended to the Via
the Via field value when the message is forwarded so that information field value when the message is forwarded so that information about
about the protocol capabilities of upstream applications remains the protocol capabilities of upstream applications remains visible to
visible to all recipients. all recipients.
The protocol-name is optional if and only if it would be "HTTP". The The protocol-name is optional if and only if it would be "HTTP". The
received-by field is normally the host and optional port number of a received-by field is normally the host and optional port number of a
recipient server or client that subsequently forwarded the message. recipient server or client that subsequently forwarded the message.
However, if the real host is considered to be sensitive information, However, if the real host is considered to be sensitive information,
it MAY be replaced by a pseudonym. If the port is not given, it MAY it MAY be replaced by a pseudonym. If the port is not given, it MAY
be assumed to be the default port of the received-protocol. be assumed to be the default port of the received-protocol.
Multiple Via field values represents each proxy or gateway that has Multiple Via field values represents each proxy or gateway that has
forwarded the message. Each recipient MUST append its information forwarded the message. Each recipient MUST append its information
skipping to change at page 148, line 4 skipping to change at page 150, line 37
For organizations that have strong privacy requirements for hiding For organizations that have strong privacy requirements for hiding
internal structures, a proxy MAY combine an ordered subsequence of internal structures, a proxy MAY combine an ordered subsequence of
Via header field entries with identical received-protocol values into Via header field entries with identical received-protocol values into
a single such entry. For example, a single such entry. For example,
Via: 1.0 ricky, 1.1 ethel, 1.1 fred, 1.0 lucy Via: 1.0 ricky, 1.1 ethel, 1.1 fred, 1.0 lucy
could be collapsed to could be collapsed to
Via: 1.0 ricky, 1.1 mertz, 1.0 lucy Via: 1.0 ricky, 1.1 mertz, 1.0 lucy
Applications SHOULD NOT combine multiple entries unless they are all Applications SHOULD NOT combine multiple entries unless they are all
under the same organizational control and the hosts have already been under the same organizational control and the hosts have already been
replaced by pseudonyms. Applications MUST NOT combine entries which replaced by pseudonyms. Applications MUST NOT combine entries which
have different received-protocol values. have different received-protocol values.
14.46 Warning 14.46. Warning
The Warning general-header field is used to carry additional The Warning general-header field is used to carry additional
information about the status or transformation of a message which information about the status or transformation of a message which
might not be reflected in the message. This information is typically might not be reflected in the message. This information is typically
used to warn about a possible lack of semantic transparency from used to warn about a possible lack of semantic transparency from
caching operations or transformations applied to the entity body of caching operations or transformations applied to the entity body of
the message. the message.
Warning headers are sent with responses using: Warning headers are sent with responses using:
skipping to change at page 148, line 36 skipping to change at page 151, line 21
warn-agent = ( host [ ":" port ] ) | pseudonym warn-agent = ( host [ ":" port ] ) | pseudonym
; the name or pseudonym of the server adding ; the name or pseudonym of the server adding
; the Warning header, for use in debugging ; the Warning header, for use in debugging
warn-text = quoted-string warn-text = quoted-string
warn-date = <"> HTTP-date <"> warn-date = <"> HTTP-date <">
A response MAY carry more than one Warning header. A response MAY carry more than one Warning header.
The warn-text SHOULD be in a natural language and character set that The warn-text SHOULD be in a natural language and character set that
is most likely to be intelligible to the human user receiving the is most likely to be intelligible to the human user receiving the
response. This decision MAY be based on any available knowledge, such response. This decision MAY be based on any available knowledge,
as the location of the cache or user, the Accept-Language field in a such as the location of the cache or user, the Accept-Language field
request, the Content-Language field in a response, etc. The default in a request, the Content-Language field in a response, etc. The
language is English and the default character set is ISO-8859-1. default language is English and the default character set is ISO-
8859-1.
If a character set other than ISO-8859-1 is used, it MUST be encoded If a character set other than ISO-8859-1 is used, it MUST be encoded
in the warn-text using the method described in RFC 2047 [14]. in the warn-text using the method described in RFC 2047 [RFC2047].
Warning headers can in general be applied to any message, however Warning headers can in general be applied to any message, however
some specific warn-codes are specific to caches and can only be some specific warn-codes are specific to caches and can only be
applied to response messages. New Warning headers SHOULD be added applied to response messages. New Warning headers SHOULD be added
after any existing Warning headers. A cache MUST NOT delete any after any existing Warning headers. A cache MUST NOT delete any
Warning header that it received with a message. However, if a cache Warning header that it received with a message. However, if a cache
successfully validates a cache entry, it SHOULD remove any Warning successfully validates a cache entry, it SHOULD remove any Warning
headers previously attached to that entry except as specified for headers previously attached to that entry except as specified for
specific Warning codes. It MUST then add any Warning headers received specific Warning codes. It MUST then add any Warning headers
in the validating response. In other words, Warning headers are those received in the validating response. In other words, Warning headers
that would be attached to the most recent relevant response. are those that would be attached to the most recent relevant
response.
When multiple Warning headers are attached to a response, the user When multiple Warning headers are attached to a response, the user
agent ought to inform the user of as many of them as possible, in the agent ought to inform the user of as many of them as possible, in the
order that they appear in the response. If it is not possible to order that they appear in the response. If it is not possible to
inform the user of all of the warnings, the user agent SHOULD follow inform the user of all of the warnings, the user agent SHOULD follow
these heuristics: these heuristics:
- Warnings that appear early in the response take priority over o Warnings that appear early in the response take priority over
those appearing later in the response. those appearing later in the response.
- Warnings in the user's preferred character set take priority o Warnings in the user's preferred character set take priority over
over warnings in other character sets but with identical warn- warnings in other character sets but with identical warn-codes and
codes and warn-agents. warn-agents.
Systems that generate multiple Warning headers SHOULD order them with Systems that generate multiple Warning headers SHOULD order them with
this user agent behavior in mind. this user agent behavior in mind.
Requirements for the behavior of caches with respect to Warnings are Requirements for the behavior of caches with respect to Warnings are
stated in section 13.1.2. stated in Section 13.1.2.
This is a list of the currently-defined warn-codes, each with a This is a list of the currently-defined warn-codes, each with a
recommended warn-text in English, and a description of its meaning. recommended warn-text in English, and a description of its meaning.
110 Response is stale 110 Response is stale
MUST be included whenever the returned response is stale. MUST be included whenever the returned response is stale.
111 Revalidation failed 111 Revalidation failed
MUST be included if a cache returns a stale response because an MUST be included if a cache returns a stale response because an
attempt to revalidate the response failed, due to an inability to attempt to revalidate the response failed, due to an inability to
reach the server. reach the server.
112 Disconnected operation 112 Disconnected operation
SHOULD be included if the cache is intentionally disconnected from SHOULD be included if the cache is intentionally disconnected from
the rest of the network for a period of time. the rest of the network for a period of time.
113 Heuristic expiration 113 Heuristic expiration
MUST be included if the cache heuristically chose a freshness MUST be included if the cache heuristically chose a freshness
lifetime greater than 24 hours and the response's age is greater lifetime greater than 24 hours and the response's age is greater
than 24 hours. than 24 hours.
199 Miscellaneous warning 199 Miscellaneous warning
The warning text MAY include arbitrary information to be presented The warning text MAY include arbitrary information to be presented
to a human user, or logged. A system receiving this warning MUST to a human user, or logged. A system receiving this warning MUST
NOT take any automated action, besides presenting the warning to NOT take any automated action, besides presenting the warning to
the user. the user.
214 Transformation applied 214 Transformation applied
MUST be added by an intermediate cache or proxy if it applies any MUST be added by an intermediate cache or proxy if it applies any
transformation changing the content-coding (as specified in the transformation changing the content-coding (as specified in the
Content-Encoding header) or media-type (as specified in the Content-Encoding header) or media-type (as specified in the
Content-Type header) of the response, or the entity-body of the Content-Type header) of the response, or the entity-body of the
response, unless this Warning code already appears in the response. response, unless this Warning code already appears in the
response.
299 Miscellaneous persistent warning 299 Miscellaneous persistent warning
The warning text MAY include arbitrary information to be presented The warning text MAY include arbitrary information to be presented
to a human user, or logged. A system receiving this warning MUST to a human user, or logged. A system receiving this warning MUST
NOT take any automated action. NOT take any automated action.
If an implementation sends a message with one or more Warning headers If an implementation sends a message with one or more Warning headers
whose version is HTTP/1.0 or lower, then the sender MUST include in whose version is HTTP/1.0 or lower, then the sender MUST include in
each warning-value a warn-date that matches the date in the response. each warning-value a warn-date that matches the date in the response.
If an implementation receives a message with a warning-value that If an implementation receives a message with a warning-value that
includes a warn-date, and that warn-date is different from the Date includes a warn-date, and that warn-date is different from the Date
skipping to change at page 150, line 29 skipping to change at page 153, line 23
each warning-value a warn-date that matches the date in the response. each warning-value a warn-date that matches the date in the response.
If an implementation receives a message with a warning-value that If an implementation receives a message with a warning-value that
includes a warn-date, and that warn-date is different from the Date includes a warn-date, and that warn-date is different from the Date
value in the response, then that warning-value MUST be deleted from value in the response, then that warning-value MUST be deleted from
the message before storing, forwarding, or using it. (This prevents the message before storing, forwarding, or using it. (This prevents
bad consequences of naive caching of Warning header fields.) If all bad consequences of naive caching of Warning header fields.) If all
of the warning-values are deleted for this reason, the Warning header of the warning-values are deleted for this reason, the Warning header
MUST be deleted as well. MUST be deleted as well.
14.47 WWW-Authenticate 14.47. WWW-Authenticate
The WWW-Authenticate response-header field MUST be included in 401 The WWW-Authenticate response-header field MUST be included in 401
(Unauthorized) response messages. The field value consists of at (Unauthorized) response messages. The field value consists of at
least one challenge that indicates the authentication scheme(s) and least one challenge that indicates the authentication scheme(s) and
parameters applicable to the Request-URI. parameters applicable to the Request-URI.
WWW-Authenticate = "WWW-Authenticate" ":" 1#challenge WWW-Authenticate = "WWW-Authenticate" ":" 1#challenge
The HTTP access authentication process is described in "HTTP The HTTP access authentication process is described in "HTTP
Authentication: Basic and Digest Access Authentication" [43]. User Authentication: Basic and Digest Access Authentication" [RFC2617].
agents are advised to take special care in parsing the WWW- User agents are advised to take special care in parsing the WWW-
Authenticate field value as it might contain more than one challenge, Authenticate field value as it might contain more than one challenge,
or if more than one WWW-Authenticate header field is provided, the or if more than one WWW-Authenticate header field is provided, the
contents of a challenge itself can contain a comma-separated list of contents of a challenge itself can contain a comma-separated list of
authentication parameters. authentication parameters.
15 Security Considerations 15. Security Considerations
This section is meant to inform application developers, information This section is meant to inform application developers, information
providers, and users of the security limitations in HTTP/1.1 as providers, and users of the security limitations in HTTP/1.1 as
described by this document. The discussion does not include described by this document. The discussion does not include
definitive solutions to the problems revealed, though it does make definitive solutions to the problems revealed, though it does make
some suggestions for reducing security risks. some suggestions for reducing security risks.
15.1 Personal Information 15.1. Personal Information
HTTP clients are often privy to large amounts of personal information HTTP clients are often privy to large amounts of personal information
(e.g. the user's name, location, mail address, passwords, encryption (e.g. the user's name, location, mail address, passwords, encryption
keys, etc.), and SHOULD be very careful to prevent unintentional keys, etc.), and SHOULD be very careful to prevent unintentional
leakage of this information via the HTTP protocol to other sources. leakage of this information via the HTTP protocol to other sources.
We very strongly recommend that a convenient interface be provided We very strongly recommend that a convenient interface be provided
for the user to control dissemination of such information, and that for the user to control dissemination of such information, and that
designers and implementors be particularly careful in this area. designers and implementors be particularly careful in this area.
History shows that errors in this area often create serious security History shows that errors in this area often create serious security
and/or privacy problems and generate highly adverse publicity for the and/or privacy problems and generate highly adverse publicity for the
implementor's company. implementor's company.
15.1.1 Abuse of Server Log Information 15.1.1. Abuse of Server Log Information
A server is in the position to save personal data about a user's A server is in the position to save personal data about a user's
requests which might identify their reading patterns or subjects of requests which might identify their reading patterns or subjects of
interest. This information is clearly confidential in nature and its interest. This information is clearly confidential in nature and its
handling can be constrained by law in certain countries. People using handling can be constrained by law in certain countries. People
the HTTP protocol to provide data are responsible for ensuring that using the HTTP protocol to provide data are responsible for ensuring
such material is not distributed without the permission of any that such material is not distributed without the permission of any
individuals that are identifiable by the published results. individuals that are identifiable by the published results.
15.1.2 Transfer of Sensitive Information 15.1.2. Transfer of Sensitive Information
Like any generic data transfer protocol, HTTP cannot regulate the Like any generic data transfer protocol, HTTP cannot regulate the
content of the data that is transferred, nor is there any a priori content of the data that is transferred, nor is there any a priori
method of determining the sensitivity of any particular piece of method of determining the sensitivity of any particular piece of
information within the context of any given request. Therefore, information within the context of any given request. Therefore,
applications SHOULD supply as much control over this information as applications SHOULD supply as much control over this information as
possible to the provider of that information. Four header fields are possible to the provider of that information. Four header fields are
worth special mention in this context: Server, Via, Referer and From. worth special mention in this context: Server, Via, Referer and From.
Revealing the specific software version of the server might allow the Revealing the specific software version of the server might allow the
server machine to become more vulnerable to attacks against software server machine to become more vulnerable to attacks against software
that is known to contain security holes. Implementors SHOULD make the that is known to contain security holes. Implementors SHOULD make
Server header field a configurable option. the Server header field a configurable option.
Proxies which serve as a portal through a network firewall SHOULD Proxies which serve as a portal through a network firewall SHOULD
take special precautions regarding the transfer of header information take special precautions regarding the transfer of header information
that identifies the hosts behind the firewall. In particular, they that identifies the hosts behind the firewall. In particular, they
SHOULD remove, or replace with sanitized versions, any Via fields SHOULD remove, or replace with sanitized versions, any Via fields
generated behind the firewall. generated behind the firewall.
The Referer header allows reading patterns to be studied and reverse The Referer header allows reading patterns to be studied and reverse
links drawn. Although it can be very useful, its power can be abused links drawn. Although it can be very useful, its power can be abused
if user details are not separated from the information contained in if user details are not separated from the information contained in
the Referer. Even when the personal information has been removed, the the Referer. Even when the personal information has been removed,
Referer header might indicate a private document's URI whose the Referer header might indicate a private document's URI whose
publication would be inappropriate. publication would be inappropriate.
The information sent in the From field might conflict with the user's The information sent in the From field might conflict with the user's
privacy interests or their site's security policy, and hence it privacy interests or their site's security policy, and hence it
SHOULD NOT be transmitted without the user being able to disable, SHOULD NOT be transmitted without the user being able to disable,
enable, and modify the contents of the field. The user MUST be able enable, and modify the contents of the field. The user MUST be able
to set the contents of this field within a user preference or to set the contents of this field within a user preference or
application defaults configuration. application defaults configuration.
We suggest, though do not require, that a convenient toggle interface We suggest, though do not require, that a convenient toggle interface
be provided for the user to enable or disable the sending of From and be provided for the user to enable or disable the sending of From and
Referer information. Referer information.
The User-Agent (section 14.43) or Server (section 14.38) header The User-Agent (Section 14.43) or Server (Section 14.38) header
fields can sometimes be used to determine that a specific client or fields can sometimes be used to determine that a specific client or
server have a particular security hole which might be exploited. server have a particular security hole which might be exploited.
Unfortunately, this same information is often used for other valuable Unfortunately, this same information is often used for other valuable
purposes for which HTTP currently has no better mechanism. purposes for which HTTP currently has no better mechanism.
15.1.3 Encoding Sensitive Information in URI's 15.1.3. Encoding Sensitive Information in URI's
Because the source of a link might be private information or might Because the source of a link might be private information or might
reveal an otherwise private information source, it is strongly reveal an otherwise private information source, it is strongly
recommended that the user be able to select whether or not the recommended that the user be able to select whether or not the
Referer field is sent. For example, a browser client could have a Referer field is sent. For example, a browser client could have a
toggle switch for browsing openly/anonymously, which would toggle switch for browsing openly/anonymously, which would
respectively enable/disable the sending of Referer and From respectively enable/disable the sending of Referer and From
information. information.
Clients SHOULD NOT include a Referer header field in a (non-secure) Clients SHOULD NOT include a Referer header field in a (non-secure)
HTTP request if the referring page was transferred with a secure HTTP request if the referring page was transferred with a secure
protocol. protocol.
Authors of services which use the HTTP protocol SHOULD NOT use GET Authors of services which use the HTTP protocol SHOULD NOT use GET
based forms for the submission of sensitive data, because this will based forms for the submission of sensitive data, because this will
cause this data to be encoded in the Request-URI. Many existing cause this data to be encoded in the Request-URI. Many existing
servers, proxies, and user agents will log the request URI in some servers, proxies, and user agents will log the request URI in some
place where it might be visible to third parties. Servers can use place where it might be visible to third parties. Servers can use
POST-based form submission instead POST-based form submission instead
15.1.4 Privacy Issues Connected to Accept Headers 15.1.4. Privacy Issues Connected to Accept Headers
Accept request-headers can reveal information about the user to all Accept request-headers can reveal information about the user to all
servers which are accessed. The Accept-Language header in particular servers which are accessed. The Accept-Language header in particular
can reveal information the user would consider to be of a private can reveal information the user would consider to be of a private
nature, because the understanding of particular languages is often nature, because the understanding of particular languages is often
strongly correlated to the membership of a particular ethnic group. strongly correlated to the membership of a particular ethnic group.
User agents which offer the option to configure the contents of an User agents which offer the option to configure the contents of an
Accept-Language header to be sent in every request are strongly Accept-Language header to be sent in every request are strongly
encouraged to let the configuration process include a message which encouraged to let the configuration process include a message which
makes the user aware of the loss of privacy involved. makes the user aware of the loss of privacy involved.
skipping to change at page 153, line 33 skipping to change at page 156, line 28
many users not behind a proxy, the network address of the host many users not behind a proxy, the network address of the host
running the user agent will also serve as a long-lived user running the user agent will also serve as a long-lived user
identifier. In environments where proxies are used to enhance identifier. In environments where proxies are used to enhance
privacy, user agents ought to be conservative in offering accept privacy, user agents ought to be conservative in offering accept
header configuration options to end users. As an extreme privacy header configuration options to end users. As an extreme privacy
measure, proxies could filter the accept headers in relayed requests. measure, proxies could filter the accept headers in relayed requests.
General purpose user agents which provide a high degree of header General purpose user agents which provide a high degree of header
configurability SHOULD warn users about the loss of privacy which can configurability SHOULD warn users about the loss of privacy which can
be involved. be involved.
15.2 Attacks Based On File and Path Names 15.2. Attacks Based On File and Path Names
Implementations of HTTP origin servers SHOULD be careful to restrict Implementations of HTTP origin servers SHOULD be careful to restrict
the documents returned by HTTP requests to be only those that were the documents returned by HTTP requests to be only those that were
intended by the server administrators. If an HTTP server translates intended by the server administrators. If an HTTP server translates
HTTP URIs directly into file system calls, the server MUST take HTTP URIs directly into file system calls, the server MUST take
special care not to serve files that were not intended to be special care not to serve files that were not intended to be
delivered to HTTP clients. For example, UNIX, Microsoft Windows, and delivered to HTTP clients. For example, UNIX, Microsoft Windows, and
other operating systems use ".." as a path component to indicate a other operating systems use ".." as a path component to indicate a
directory level above the current one. On such a system, an HTTP directory level above the current one. On such a system, an HTTP
server MUST disallow any such construct in the Request-URI if it server MUST disallow any such construct in the Request-URI if it
would otherwise allow access to a resource outside those intended to would otherwise allow access to a resource outside those intended to
be accessible via the HTTP server. Similarly, files intended for be accessible via the HTTP server. Similarly, files intended for
reference only internally to the server (such as access control reference only internally to the server (such as access control
files, configuration files, and script code) MUST be protected from files, configuration files, and script code) MUST be protected from
inappropriate retrieval, since they might contain sensitive inappropriate retrieval, since they might contain sensitive
information. Experience has shown that minor bugs in such HTTP server information. Experience has shown that minor bugs in such HTTP
implementations have turned into security risks. server implementations have turned into security risks.
15.3 DNS Spoofing 15.3. DNS Spoofing
Clients using HTTP rely heavily on the Domain Name Service, and are Clients using HTTP rely heavily on the Domain Name Service, and are
thus generally prone to security attacks based on the deliberate thus generally prone to security attacks based on the deliberate mis-
mis-association of IP addresses and DNS names. Clients need to be association of IP addresses and DNS names. Clients need to be
cautious in assuming the continuing validity of an IP number/DNS name cautious in assuming the continuing validity of an IP number/DNS name
association. association.
In particular, HTTP clients SHOULD rely on their name resolver for In particular, HTTP clients SHOULD rely on their name resolver for
confirmation of an IP number/DNS name association, rather than confirmation of an IP number/DNS name association, rather than
caching the result of previous host name lookups. Many platforms caching the result of previous host name lookups. Many platforms
already can cache host name lookups locally when appropriate, and already can cache host name lookups locally when appropriate, and
they SHOULD be configured to do so. It is proper for these lookups to they SHOULD be configured to do so. It is proper for these lookups
be cached, however, only when the TTL (Time To Live) information to be cached, however, only when the TTL (Time To Live) information
reported by the name server makes it likely that the cached reported by the name server makes it likely that the cached
information will remain useful. information will remain useful.
If HTTP clients cache the results of host name lookups in order to If HTTP clients cache the results of host name lookups in order to
achieve a performance improvement, they MUST observe the TTL achieve a performance improvement, they MUST observe the TTL
information reported by DNS. information reported by DNS.
If HTTP clients do not observe this rule, they could be spoofed when If HTTP clients do not observe this rule, they could be spoofed when
a previously-accessed server's IP address changes. As network a previously-accessed server's IP address changes. As network
renumbering is expected to become increasingly common [24], the renumbering is expected to become increasingly common [RFC1900], the
possibility of this form of attack will grow. Observing this possibility of this form of attack will grow. Observing this
requirement thus reduces this potential security vulnerability. requirement thus reduces this potential security vulnerability.
This requirement also improves the load-balancing behavior of clients This requirement also improves the load-balancing behavior of clients
for replicated servers using the same DNS name and reduces the for replicated servers using the same DNS name and reduces the
likelihood of a user's experiencing failure in accessing sites which likelihood of a user's experiencing failure in accessing sites which
use that strategy. use that strategy.
15.4 Location Headers and Spoofing 15.4. Location Headers and Spoofing
If a single server supports multiple organizations that do not trust If a single server supports multiple organizations that do not trust
one another, then it MUST check the values of Location and Content- one another, then it MUST check the values of Location and Content-
Location headers in responses that are generated under control of Location headers in responses that are generated under control of
said organizations to make sure that they do not attempt to said organizations to make sure that they do not attempt to
invalidate resources over which they have no authority. invalidate resources over which they have no authority.
15.5 Content-Disposition Issues 15.5. Content-Disposition Issues
RFC 1806 [35], from which the often implemented Content-Disposition RFC 1806 [RFC1806], from which the often implemented Content-
(see section 19.5.1) header in HTTP is derived, has a number of very Disposition (see Appendix A.5.1) header in HTTP is derived, has a
serious security considerations. Content-Disposition is not part of number of very serious security considerations. Content-Disposition
the HTTP standard, but since it is widely implemented, we are is not part of the HTTP standard, but since it is widely implemented,
documenting its use and risks for implementors. See RFC 2183 [49] we are documenting its use and risks for implementors. See RFC 2183
(which updates RFC 1806) for details. [RFC2183] (which updates RFC 1806) for details.
15.6 Authentication Credentials and Idle Clients 15.6. Authentication Credentials and Idle Clients
Existing HTTP clients and user agents typically retain authentication Existing HTTP clients and user agents typically retain authentication
information indefinitely. HTTP/1.1. does not provide a method for a information indefinitely. HTTP/1.1. does not provide a method for a
server to direct clients to discard these cached credentials. This is server to direct clients to discard these cached credentials. This
a significant defect that requires further extensions to HTTP. is a significant defect that requires further extensions to HTTP.
Circumstances under which credential caching can interfere with the Circumstances under which credential caching can interfere with the
application's security model include but are not limited to: application's security model include but are not limited to:
- Clients which have been idle for an extended period following o Clients which have been idle for an extended period following
which the server might wish to cause the client to reprompt the which the server might wish to cause the client to reprompt the
user for credentials. user for credentials.
- Applications which include a session termination indication o Applications which include a session termination indication (such
(such as a `logout' or `commit' button on a page) after which as a `logout' or `commit' button on a page) after which the server
the server side of the application `knows' that there is no side of the application `knows' that there is no further reason
further reason for the client to retain the credentials. for the client to retain the credentials.
This is currently under separate study. There are a number of work- This is currently under separate study. There are a number of work-
arounds to parts of this problem, and we encourage the use of arounds to parts of this problem, and we encourage the use of
password protection in screen savers, idle time-outs, and other password protection in screen savers, idle time-outs, and other
methods which mitigate the security problems inherent in this methods which mitigate the security problems inherent in this
problem. In particular, user agents which cache credentials are problem. In particular, user agents which cache credentials are
encouraged to provide a readily accessible mechanism for discarding encouraged to provide a readily accessible mechanism for discarding
cached credentials under user control. cached credentials under user control.
15.7 Proxies and Caching 15.7. Proxies and Caching
By their very nature, HTTP proxies are men-in-the-middle, and By their very nature, HTTP proxies are men-in-the-middle, and
represent an opportunity for man-in-the-middle attacks. Compromise of represent an opportunity for man-in-the-middle attacks. Compromise
the systems on which the proxies run can result in serious security of the systems on which the proxies run can result in serious
and privacy problems. Proxies have access to security-related security and privacy problems. Proxies have access to security-
information, personal information about individual users and related information, personal information about individual users and
organizations, and proprietary information belonging to users and organizations, and proprietary information belonging to users and
content providers. A compromised proxy, or a proxy implemented or content providers. A compromised proxy, or a proxy implemented or
configured without regard to security and privacy considerations, configured without regard to security and privacy considerations,
might be used in the commission of a wide range of potential attacks. might be used in the commission of a wide range of potential attacks.
Proxy operators should protect the systems on which proxies run as Proxy operators should protect the systems on which proxies run as
they would protect any system that contains or transports sensitive they would protect any system that contains or transports sensitive
information. In particular, log information gathered at proxies often information. In particular, log information gathered at proxies
contains highly sensitive personal information, and/or information often contains highly sensitive personal information, and/or
about organizations. Log information should be carefully guarded, and information about organizations. Log information should be carefully
appropriate guidelines for use developed and followed. (Section guarded, and appropriate guidelines for use developed and followed.
15.1.1). (Section 15.1.1).
Caching proxies provide additional potential vulnerabilities, since Caching proxies provide additional potential vulnerabilities, since
the contents of the cache represent an attractive target for the contents of the cache represent an attractive target for
malicious exploitation. Because cache contents persist after an HTTP malicious exploitation. Because cache contents persist after an HTTP
request is complete, an attack on the cache can reveal information request is complete, an attack on the cache can reveal information
long after a user believes that the information has been removed from long after a user believes that the information has been removed from
the network. Therefore, cache contents should be protected as the network. Therefore, cache contents should be protected as
sensitive information. sensitive information.
Proxy implementors should consider the privacy and security Proxy implementors should consider the privacy and security
skipping to change at page 156, line 25 skipping to change at page 159, line 17
configuration options they provide to proxy operators (especially the configuration options they provide to proxy operators (especially the
default configuration). default configuration).
Users of a proxy need to be aware that they are no trustworthier than Users of a proxy need to be aware that they are no trustworthier than
the people who run the proxy; HTTP itself cannot solve this problem. the people who run the proxy; HTTP itself cannot solve this problem.
The judicious use of cryptography, when appropriate, may suffice to The judicious use of cryptography, when appropriate, may suffice to
protect against a broad range of security and privacy attacks. Such protect against a broad range of security and privacy attacks. Such
cryptography is beyond the scope of the HTTP/1.1 specification. cryptography is beyond the scope of the HTTP/1.1 specification.
15.7.1 Denial of Service Attacks on Proxies 15.7.1. Denial of Service Attacks on Proxies
They exist. They are hard to defend against. Research continues. They exist. They are hard to defend against. Research continues.
Beware. Beware.
16 Acknowledgments 16. Acknowledgments
This specification makes heavy use of the augmented BNF and generic This specification makes heavy use of the augmented BNF and generic
constructs defined by David H. Crocker for RFC 822 [9]. Similarly, it constructs defined by David H. Crocker for RFC 822 [RFC822].
reuses many of the definitions provided by Nathaniel Borenstein and Similarly, it reuses many of the definitions provided by Nathaniel
Ned Freed for MIME [7]. We hope that their inclusion in this Borenstein and Ned Freed for MIME [RFC2045]. We hope that their
specification will help reduce past confusion over the relationship inclusion in this specification will help reduce past confusion over
between HTTP and Internet mail message formats. the relationship between HTTP and Internet mail message formats.
The HTTP protocol has evolved considerably over the years. It has The HTTP protocol has evolved considerably over the years. It has
benefited from a large and active developer community--the many benefited from a large and active developer community--the many
people who have participated on the www-talk mailing list--and it is people who have participated on the www-talk mailing list--and it is
that community which has been most responsible for the success of that community which has been most responsible for the success of
HTTP and of the World-Wide Web in general. Marc Andreessen, Robert HTTP and of the World-Wide Web in general. Marc Andreessen, Robert
Cailliau, Daniel W. Connolly, Bob Denny, John Franks, Jean-Francois Cailliau, Daniel W. Connolly, Bob Denny, John Franks, Jean-Francois
Groff, Phillip M. Hallam-Baker, Hakon W. Lie, Ari Luotonen, Rob Groff, Phillip M. Hallam-Baker, Hakon W. Lie, Ari Luotonen, Rob
McCool, Lou Montulli, Dave Raggett, Tony Sanders, and Marc McCool, Lou Montulli, Dave Raggett, Tony Sanders, and Marc
VanHeyningen deserve special recognition for their efforts in VanHeyningen deserve special recognition for their efforts in
defining early aspects of the protocol. defining early aspects of the protocol.
This document has benefited greatly from the comments of all those This document has benefited greatly from the comments of all those
participating in the HTTP-WG. In addition to those already mentioned, participating in the HTTP-WG. In addition to those already
the following individuals have contributed to this specification: mentioned, the following individuals have contributed to this
specification:
Gary Adams Ross Patterson Gary Adams Ross Patterson
Harald Tveit Alvestrand Albert Lunde Harald Tveit Alvestrand Albert Lunde
Keith Ball John C. Mallery Keith Ball John C. Mallery
Brian Behlendorf Jean-Philippe Martin-Flatin Brian Behlendorf Jean-Philippe Martin-Flatin
Paul Burchard Mitra Paul Burchard Mitra
Maurizio Codogno David Morris Maurizio Codogno David Morris
Mike Cowlishaw Gavin Nicol Mike Cowlishaw Gavin Nicol
Roman Czyborra Bill Perry Roman Czyborra Bill Perry
Michael A. Dolan Jeffrey Perry Michael A. Dolan Jeffrey Perry
skipping to change at page 158, line 10 skipping to change at page 161, line 5
with John Klensin, Jeff Mogul, Paul Leach, Dave Kristol, Koen with John Klensin, Jeff Mogul, Paul Leach, Dave Kristol, Koen
Holtman, John Franks, Josh Cohen, Alex Hopmann, Scott Lawrence, and Holtman, John Franks, Josh Cohen, Alex Hopmann, Scott Lawrence, and
Larry Masinter for their help. And thanks go particularly to Jeff Larry Masinter for their help. And thanks go particularly to Jeff
Mogul and Scott Lawrence for performing the "MUST/MAY/SHOULD" audit. Mogul and Scott Lawrence for performing the "MUST/MAY/SHOULD" audit.
The Apache Group, Anselm Baird-Smith, author of Jigsaw, and Henrik The Apache Group, Anselm Baird-Smith, author of Jigsaw, and Henrik
Frystyk implemented RFC 2068 early, and we wish to thank them for the Frystyk implemented RFC 2068 early, and we wish to thank them for the
discovery of many of the problems that this document attempts to discovery of many of the problems that this document attempts to
rectify. rectify.
17 References 17. References
[1] Alvestrand, H., "Tags for the Identification of Languages", RFC
1766, March 1995.
[2] Anklesaria, F., McCahill, M., Lindner, P., Johnson, D., Torrey,
D. and B. Alberti, "The Internet Gopher Protocol (a distributed
document search and retrieval protocol)", RFC 1436, March 1993.
[3] Berners-Lee, T., "Universal Resource Identifiers in WWW", RFC
1630, June 1994.
[4] Berners-Lee, T., Masinter, L. and M. McCahill, "Uniform Resource
Locators (URL)", RFC 1738, December 1994.
[5] Berners-Lee, T. and D. Connolly, "Hypertext Markup Language -
2.0", RFC 1866, November 1995.
[6] Berners-Lee, T., Fielding, R. and H. Frystyk, "Hypertext Transfer
Protocol -- HTTP/1.0", RFC 1945, May 1996.
[7] Freed, N. and N. Borenstein, "Multipurpose Internet Mail [ISO-8859]
Extensions (MIME) Part One: Format of Internet Message Bodies", International Organization for Standardization,
RFC 2045, November 1996. "Information technology - 8-bit single byte coded graphic
- character sets", 1987-1990.
[8] Braden, R., "Requirements for Internet Hosts -- Communication Part 1: Latin alphabet No. 1, ISO-8859-1:1987. Part 2:
Layers", STD 3, RFC 1123, October 1989. Latin alphabet No. 2, ISO-8859-2, 1987. Part 3: Latin
alphabet No. 3, ISO-8859-3, 1988. Part 4: Latin alphabet
No. 4, ISO-8859-4, 1988. Part 5: Latin/Cyrillic alphabet,
ISO-8859-5, 1988. Part 6: Latin/Arabic alphabet, ISO-
8859-6, 1987. Part 7: Latin/Greek alphabet, ISO-8859-7,
1987. Part 8: Latin/Hebrew alphabet, ISO-8859-8, 1988.
Part 9: Latin alphabet No. 5, ISO-8859-9, 1990.
[9] Crocker, D., "Standard for The Format of ARPA Internet Text [Luo1998] Luotonen, A., "Tunneling TCP based protocols through Web
Messages", STD 11, RFC 822, August 1982. proxy servers", Work in Progress.
[10] Davis, F., Kahle, B., Morris, H., Salem, J., Shen, T., Wang, R., [Nie1997] Nielsen, H., Gettys, J., Prud'hommeaux, E., Lie, H., and
Sui, J., and M. Grinbaum, "WAIS Interface Protocol Prototype C. Lilley, "Network Performance Effects of HTTP/1.1, CSS1,
Functional Specification," (v1.5), Thinking Machines and PNG", Proceedings of ACM SIGCOMM '97, Cannes France ,
Corporation, April 1990. Sep 1997.
[11] Fielding, R., "Relative Uniform Resource Locators", RFC 1808, [Pad1995] Padmanabhan, V. and J. Mogul, "Improving HTTP Latency",
June 1995. Computer Networks and ISDN Systems v. 28, pp. 25-35,
Dec 1995.
[12] Horton, M. and R. Adams, "Standard for Interchange of USENET Slightly revised version of paper in Proc. 2nd
Messages", RFC 1036, December 1987. International WWW Conference '94: Mosaic and the Web, Oct.
1994, which is available at <http://www.ncsa.uiuc.edu/SDG/
IT94/Proceedings/DDay/mogul/HTTPLatency.html>.
[13] Kantor, B. and P. Lapsley, "Network News Transfer Protocol", RFC [RFC1036] Horton, M. and R. Adams, "Standard for interchange of
977, February 1986. USENET messages", RFC 1036, December 1987.
[14] Moore, K., "MIME (Multipurpose Internet Mail Extensions) Part [RFC1123] Braden, R., "Requirements for Internet Hosts - Application
Three: Message Header Extensions for Non-ASCII Text", RFC 2047, and Support", STD 3, RFC 1123, October 1989.
November 1996.
[15] Nebel, E. and L. Masinter, "Form-based File Upload in HTML", RFC [RFC1305] Mills, D., "Network Time Protocol (Version 3)
1867, November 1995. Specification, Implementation", RFC 1305, March 1992.
[16] Postel, J., "Simple Mail Transfer Protocol", STD 10, RFC 821, [RFC1436] Anklesaria, F., McCahill, M., Lindner, P., Johnson, D.,
August 1982. Torrey, D., and B. Alberti, "The Internet Gopher Protocol
(a distributed document search and retrieval protocol)",
RFC 1436, March 1993.
[17] Postel, J., "Media Type Registration Procedure", RFC 1590, [RFC1590] Postel, J., "Media Type Registration Procedure", RFC 1590,
November 1996. November 1996.
[18] Postel, J. and J. Reynolds, "File Transfer Protocol", STD 9, RFC [RFC1630] Berners-Lee, T., "Universal Resource Identifiers in WWW: A
959, October 1985. Unifying Syntax for the Expression of Names and Addresses
of Objects on the Network as used in the World-Wide Web",
RFC 1630, June 1994.
[19] Reynolds, J. and J. Postel, "Assigned Numbers", STD 2, RFC 1700, [RFC1700] Reynolds, J. and J. Postel, "Assigned Numbers", STD 2,
October 1994. RFC 1700, October 1994.
[20] Sollins, K. and L. Masinter, "Functional Requirements for [RFC1737] Masinter, L. and K. Sollins, "Functional Requirements for
Uniform Resource Names", RFC 1737, December 1994. Uniform Resource Names", RFC 1737, December 1994.
[21] US-ASCII. Coded Character Set - 7-Bit American Standard Code for [RFC1738] Berners-Lee, T., Masinter, L., and M. McCahill, "Uniform
Information Interchange. Standard ANSI X3.4-1986, ANSI, 1986. Resource Locators (URL)", RFC 1738, December 1994.
[22] ISO-8859. International Standard -- Information Processing --
8-bit Single-Byte Coded Graphic Character Sets --
Part 1: Latin alphabet No. 1, ISO-8859-1:1987.
Part 2: Latin alphabet No. 2, ISO-8859-2, 1987.
Part 3: Latin alphabet No. 3, ISO-8859-3, 1988.
Part 4: Latin alphabet No. 4, ISO-8859-4, 1988.
Part 5: Latin/Cyrillic alphabet, ISO-8859-5, 1988.
Part 6: Latin/Arabic alphabet, ISO-8859-6, 1987.
Part 7: Latin/Greek alphabet, ISO-8859-7, 1987.
Part 8: Latin/Hebrew alphabet, ISO-8859-8, 1988.
Part 9: Latin alphabet No. 5, ISO-8859-9, 1990.
[23] Meyers, J. and M. Rose, "The Content-MD5 Header Field", RFC [RFC1766] Alvestrand, H., "Tags for the Identification of
1864, October 1995. Languages", RFC 1766, March 1995.
[24] Carpenter, B. and Y. Rekhter, "Renumbering Needs Work", RFC [RFC1806] Troost, R. and S. Dorner, "Communicating Presentation
1900, February 1996. Information in Internet Messages: The Content-Disposition
Header", RFC 1806, June 1995.
[25] Deutsch, P., "GZIP file format specification version 4.3", RFC [RFC1808] Fielding, R., "Relative Uniform Resource Locators",
1952, May 1996. RFC 1808, June 1995.
[26] Venkata N. Padmanabhan, and Jeffrey C. Mogul. "Improving HTTP [RFC1864] Myers, J. and M. Rose, "The Content-MD5 Header Field",
Latency", Computer Networks and ISDN Systems, v. 28, pp. 25-35, RFC 1864, October 1995.
Dec. 1995. Slightly revised version of paper in Proc. 2nd
International WWW Conference '94: Mosaic and the Web, Oct. 1994,
which is available at
http://www.ncsa.uiuc.edu/SDG/IT94/Proceedings/DDay/mogul/HTTPLat
ency.html.
[27] Joe Touch, John Heidemann, and Katia Obraczka. "Analysis of HTTP [RFC1866] Berners-Lee, T. and D. Connolly, "Hypertext Markup
Performance", <URL: http://www.isi.edu/touch/pubs/http-perf96/>, Language - 2.0", RFC 1866, November 1995.
ISI Research Report ISI/RR-98-463, (original report dated Aug.
1996), USC/Information Sciences Institute, August 1998.
[28] Mills, D., "Network Time Protocol (Version 3) Specification, [RFC1867] Masinter, L. and E. Nebel, "Form-based File Upload in
Implementation and Analysis", RFC 1305, March 1992. HTML", RFC 1867, November 1995.
[29] Deutsch, P., "DEFLATE Compressed Data Format Specification [RFC1900] Carpenter, B. and Y. Rekhter, "Renumbering Needs Work",
version 1.3", RFC 1951, May 1996. RFC 1900, February 1996.
[30] S. Spero, "Analysis of HTTP Performance Problems," [RFC1945] Berners-Lee, T., Fielding, R., and H. Nielsen, "Hypertext
http://sunsite.unc.edu/mdma-release/http-prob.html. Transfer Protocol -- HTTP/1.0", RFC 1945, May 1996.
[31] Deutsch, P. and J. Gailly, "ZLIB Compressed Data Format [RFC1950] Deutsch, L. and J-L. Gailly, "ZLIB Compressed Data Format
Specification version 3.3", RFC 1950, May 1996. Specification version 3.3", RFC 1950, May 1996.
[32] Franks, J., Hallam-Baker, P., Hostetler, J., Leach, P., [RFC1951] Deutsch, P., "DEFLATE Compressed Data Format Specification
Luotonen, A., Sink, E. and L. Stewart, "An Extension to HTTP: version 1.3", RFC 1951, May 1996.
Digest Access Authentication", RFC 2069, January 1997.
[33] Fielding, R., Gettys, J., Mogul, J., Frystyk, H. and T.
Berners-Lee, "Hypertext Transfer Protocol -- HTTP/1.1", RFC
2068, January 1997.
[34] Bradner, S., "Key words for use in RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, March 1997.
[35] Troost, R. and Dorner, S., "Communicating Presentation
Information in Internet Messages: The Content-Disposition
Header", RFC 1806, June 1995.
[36] Mogul, J., Fielding, R., Gettys, J. and H. Frystyk, "Use and [RFC1952] Deutsch, P., Gailly, J-L., Adler, M., Deutsch, L., and G.
Interpretation of HTTP Version Numbers", RFC 2145, May 1997.
[jg639]
[37] Palme, J., "Common Internet Message Headers", RFC 2076, February Randers-Pehrson, "GZIP file format specification version
1997. [jg640] 4.3", RFC 1952, May 1996.
[38] Yergeau, F., "UTF-8, a transformation format of Unicode and
ISO-10646", RFC 2279, January 1998. [jg641]
[39] Nielsen, H.F., Gettys, J., Baird-Smith, A., Prud'hommeaux, E., [RFC2026] Bradner, S., "The Internet Standards Process -- Revision
Lie, H., and C. Lilley. "Network Performance Effects of 3", BCP 9, RFC 2026, October 1996.
HTTP/1.1, CSS1, and PNG," Proceedings of ACM SIGCOMM '97, Cannes
France, September 1997.[jg642]
[40] Freed, N. and N. Borenstein, "Multipurpose Internet Mail [RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part Two: Media Types", RFC 2046, November Extensions (MIME) Part One: Format of Internet Message
1996. [jg643] Bodies", RFC 2045, November 1996.
[41] Alvestrand, H., "IETF Policy on Character Sets and Languages", [RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
BCP 18, RFC 2277, January 1998. [jg644] Extensions (MIME) Part Two: Media Types", RFC 2046,
November 1996.
[42] Berners-Lee, T., Fielding, R. and L. Masinter, "Uniform Resource [RFC2047] Moore, K., "MIME (Multipurpose Internet Mail Extensions)
Identifiers (URI): Generic Syntax and Semantics", RFC 2396, Part Three: Message Header Extensions for Non-ASCII Text",
August 1998. [jg645] RFC 2047, November 1996.
[43] Franks, J., Hallam-Baker, P., Hostetler, J., Lawrence, S., [RFC2049] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Leach, P., Luotonen, A., Sink, E. and L. Stewart, "HTTP Extensions (MIME) Part Five: Conformance Criteria and
Authentication: Basic and Digest Access Authentication", RFC Examples", RFC 2049, November 1996.
2617, June 1999. [jg646]
[44] Luotonen, A., "Tunneling TCP based protocols through Web proxy [RFC2068] Fielding, R., Gettys, J., Mogul, J., Nielsen, H., and T.
servers," Work in Progress. [jg647] Berners-Lee, "Hypertext Transfer Protocol -- HTTP/1.1",
RFC 2068, January 1997.
[45] Palme, J. and A. Hopmann, "MIME E-mail Encapsulation of [RFC2069] Franks, J., Hallam-Baker, P., Hostetler, J., Leach, P.,
Aggregate Documents, such as HTML (MHTML)", RFC 2110, March Luotonen, A., Sink, E., and L. Stewart, "An Extension to
1997. HTTP : Digest Access Authentication", RFC 2069,
January 1997.
[46] Bradner, S., "The Internet Standards Process -- Revision 3", BCP [RFC2076] Palme, J., "Common Internet Message Headers", RFC 2076,
9, RFC 2026, October 1996. February 1997.
[47] Masinter, L., "Hyper Text Coffee Pot Control Protocol [RFC2110] Palme, J. and A. Hopmann, "MIME E-mail Encapsulation of
(HTCPCP/1.0)", RFC 2324, 1 April 1998. Aggregate Documents, such as HTML (MHTML)", RFC 2110,
March 1997.
[48] Freed, N. and N. Borenstein, "Multipurpose Internet Mail [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Extensions (MIME) Part Five: Conformance Criteria and Examples", Requirement Levels", BCP 14, RFC 2119, March 1997.
RFC 2049, November 1996.
[49] Troost, R., Dorner, S. and K. Moore, "Communicating Presentation [RFC2145] Mogul, J., Fielding, R., Gettys, J., and H. Nielsen, "Use
Information in Internet Messages: The Content-Disposition Header and Interpretation of HTTP Version Numbers", RFC 2145,
Field", RFC 2183, August 1997. May 1997.
18 Authors' Addresses [RFC2183] Troost, R., Dorner, S., and K. Moore, "Communicating
Presentation Information in Internet Messages: The
Content-Disposition Header Field", RFC 2183, August 1997.
Roy T. Fielding [RFC2277] Alvestrand, H., "IETF Policy on Character Sets and
Information and Computer Science Languages", BCP 18, RFC 2277, January 1998.
University of California, Irvine
Irvine, CA 92697-3425, USA
Fax: +1 (949) 824-1715 [RFC2279] Yergeau, F., "UTF-8, a transformation format of ISO
EMail: fielding@ics.uci.edu 10646", RFC 2279, January 1998.
James Gettys [RFC2324] Masinter, L., "Hyper Text Coffee Pot Control Protocol
World Wide Web Consortium (HTCPCP/1.0)", RFC 2324, April 1998.
MIT Laboratory for Computer Science
545 Technology Square
Cambridge, MA 02139, USA
Fax: +1 (617) 258 8682 [RFC2396] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
EMail: jg@w3.org Resource Identifiers (URI): Generic Syntax", RFC 2396,
August 1998.
Jeffrey C. Mogul [RFC2617] Franks, J., Hallam-Baker, P., Hostetler, J., Lawrence, S.,
Western Research Laboratory Leach, P., Luotonen, A., and L. Stewart, "HTTP
Compaq Computer Corporation Authentication: Basic and Digest Access Authentication",
250 University Avenue RFC 2617, June 1999.
Palo Alto, California, 94305, USA
EMail: mogul@wrl.dec.com [RFC821] Postel, J., "Simple Mail Transfer Protocol", STD 10,
RFC 821, August 1982.
Henrik Frystyk Nielsen [RFC822] Crocker, D., "Standard for the format of ARPA Internet
World Wide Web Consortium text messages", STD 11, RFC 822, August 1982.
MIT Laboratory for Computer Science
545 Technology Square
Cambridge, MA 02139, USA
Fax: +1 (617) 258 8682 [RFC959] Postel, J. and J. Reynolds, "File Transfer Protocol",
EMail: frystyk@w3.org STD 9, RFC 959, October 1985.
Larry Masinter [RFC977] Kantor, B. and P. Lapsley, "Network News Transfer
Xerox Corporation Protocol", RFC 977, February 1986.
3333 Coyote Hill Road
Palo Alto, CA 94034, USA
EMail: masinter@parc.xerox.com [Spe] Spero, S., "Analysis of HTTP Performance Problems",
Paul J. Leach <http://sunsite.unc.edu/mdma-release/http-prob.html>.
Microsoft Corporation
1 Microsoft Way
Redmond, WA 98052, USA
EMail: paulle@microsoft.com [Tou1998] Touch, J., Heidemann, J., and K. Obraczka, "Analysis of
HTTP Performance", ISI Research Report ISI/RR-98-463
(original report dated Aug.1996), Aug 1998,
<http://www.isi.edu/touch/pubs/http-perf96/>.
Tim Berners-Lee [USASCII] American National Standards Institute, "Coded Character
Director, World Wide Web Consortium Set -- 7-bit American Standard Code for Information
MIT Laboratory for Computer Science Interchange", ANSI X3.4, 1986.
545 Technology Square
Cambridge, MA 02139, USA
Fax: +1 (617) 258 8682 [WAIS] Davis, F., Kahle, B., Morris, H., Salem, J., Shen, T.,
EMail: timbl@w3.org Wang, R., Sui, J., and M. Grinbaum, "WAIS Interface
Protocol Prototype Functional Specification (v1.5)",
Thinking Machines Corporation , April 1990.
19 Appendices Appendix A. Appendices
19.1 Internet Media Type message/http and application/http A.1. Internet Media Type message/http and application/http
In addition to defining the HTTP/1.1 protocol, this document serves In addition to defining the HTTP/1.1 protocol, this document serves
as the specification for the Internet media type "message/http" and as the specification for the Internet media type "message/http" and
"application/http". The message/http type can be used to enclose a "application/http". The message/http type can be used to enclose a
single HTTP request or response message, provided that it obeys the single HTTP request or response message, provided that it obeys the
MIME restrictions for all "message" types regarding line length and MIME restrictions for all "message" types regarding line length and
encodings. The application/http type can be used to enclose a encodings. The application/http type can be used to enclose a
pipeline of one or more HTTP request or response messages (not pipeline of one or more HTTP request or response messages (not
intermixed). The following is to be registered with IANA [17]. intermixed). The following is to be registered with IANA [RFC1590].
Media Type name: message Media Type name: message
Media subtype name: http Media subtype name: http
Required parameters: none Required parameters: none
Optional parameters: version, msgtype Optional parameters: version, msgtype
version: The HTTP-Version number of the enclosed message
(e.g., "1.1"). If not present, the version can be version: The HTTP-Version number of the enclosed message (e.g.,
determined from the first line of the body. "1.1"). If not present, the version can be determined from the
first line of the body.
msgtype: The message type -- "request" or "response". If not msgtype: The message type -- "request" or "response". If not
present, the type can be determined from the first present, the type can be determined from the first line of the
line of the body. body.
Encoding considerations: only "7bit", "8bit", or "binary" are Encoding considerations: only "7bit", "8bit", or "binary" are
permitted permitted
Security considerations: none Security considerations: none
Media Type name: application Media Type name: application
Media subtype name: http Media subtype name: http
Required parameters: none Required parameters: none
Optional parameters: version, msgtype Optional parameters: version, msgtype
version: The HTTP-Version number of the enclosed messages
(e.g., "1.1"). If not present, the version can be version: The HTTP-Version number of the enclosed messages (e.g.,
determined from the first line of the body. "1.1"). If not present, the version can be determined from the
first line of the body.
msgtype: The message type -- "request" or "response". If not msgtype: The message type -- "request" or "response". If not
present, the type can be determined from the first present, the type can be determined from the first line of the
line of the body. body.
Encoding considerations: HTTP messages enclosed by this type
are in "binary" format; use of an appropriate Encoding considerations: HTTP messages enclosed by this type are in
Content-Transfer-Encoding is required when "binary" format; use of an appropriate Content-Transfer-Encoding
transmitted via E-mail. is required when transmitted via E-mail.
Security considerations: none Security considerations: none
19.2 Internet Media Type multipart/byteranges A.2. Internet Media Type multipart/byteranges
When an HTTP 206 (Partial Content) response message includes the When an HTTP 206 (Partial Content) response message includes the
content of multiple ranges (a response to a request for multiple content of multiple ranges (a response to a request for multiple non-
non-overlapping ranges), these are transmitted as a multipart overlapping ranges), these are transmitted as a multipart message-
message-body. The media type for this purpose is called body. The media type for this purpose is called "multipart/
"multipart/byteranges". byteranges".
The multipart/byteranges media type includes two or more parts, each The multipart/byteranges media type includes two or more parts, each
with its own Content-Type and Content-Range fields. The required with its own Content-Type and Content-Range fields. The required
boundary parameter specifies the boundary string used to separate boundary parameter specifies the boundary string used to separate
each body-part. each body-part.
Media Type name: multipart Media Type name: multipart
Media subtype name: byteranges Media subtype name: byteranges
Required parameters: boundary Required parameters: boundary
Optional parameters: none Optional parameters: none
Encoding considerations: only "7bit", "8bit", or "binary" are Encoding considerations: only "7bit", "8bit", or "binary" are
permitted permitted
Security considerations: none
Security considerations: none
For example: For example:
HTTP/1.1 206 Partial Content HTTP/1.1 206 Partial Content
Date: Wed, 15 Nov 1995 06:25:24 GMT Date: Wed, 15 Nov 1995 06:25:24 GMT
Last-Modified: Wed, 15 Nov 1995 04:58:08 GMT Last-Modified: Wed, 15 Nov 1995 04:58:08 GMT
Content-type: multipart/byteranges; boundary=THIS_STRING_SEPARATES Content-type: multipart/byteranges; boundary=THIS_STRING_SEPARATES
--THIS_STRING_SEPARATES --THIS_STRING_SEPARATES
Content-type: application/pdf Content-type: application/pdf
Content-range: bytes 500-999/8000 Content-range: bytes 500-999/8000
skipping to change at page 165, line 47 skipping to change at page 167, line 25
...the first range... ...the first range...
--THIS_STRING_SEPARATES --THIS_STRING_SEPARATES
Content-type: application/pdf Content-type: application/pdf
Content-range: bytes 7000-7999/8000 Content-range: bytes 7000-7999/8000
...the second range ...the second range
--THIS_STRING_SEPARATES-- --THIS_STRING_SEPARATES--
Notes: Notes:
1) Additional CRLFs may precede the first boundary string in the 1. Additional CRLFs may precede the first boundary string in the
entity. entity.
2) Although RFC 2046 [40] permits the boundary string to be 2. Although RFC 2046 [RFC2046] permits the boundary string to be
quoted, some existing implementations handle a quoted boundary quoted, some existing implementations handle a quoted boundary
string incorrectly. string incorrectly.
3) A number of browsers and servers were coded to an early draft 3. A number of browsers and servers were coded to an early draft of
of the byteranges specification to use a media type of the byteranges specification to use a media type of multipart/
multipart/x-byteranges, which is almost, but not quite x-byteranges, which is almost, but not quite compatible with the
compatible with the version documented in HTTP/1.1. version documented in HTTP/1.1.
19.3 Tolerant Applications A.3. Tolerant Applications
Although this document specifies the requirements for the generation Although this document specifies the requirements for the generation
of HTTP/1.1 messages, not all applications will be correct in their of HTTP/1.1 messages, not all applications will be correct in their
implementation. We therefore recommend that operational applications implementation. We therefore recommend that operational applications
be tolerant of deviations whenever those deviations can be be tolerant of deviations whenever those deviations can be
interpreted unambiguously. interpreted unambiguously.
Clients SHOULD be tolerant in parsing the Status-Line and servers Clients SHOULD be tolerant in parsing the Status-Line and servers
tolerant when parsing the Request-Line. In particular, they SHOULD tolerant when parsing the Request-Line. In particular, they SHOULD
accept any amount of SP or HT characters between fields, even though accept any amount of SP or HT characters between fields, even though
skipping to change at page 166, line 40 skipping to change at page 168, line 15
The character set of an entity-body SHOULD be labeled as the lowest The character set of an entity-body SHOULD be labeled as the lowest
common denominator of the character codes used within that body, with common denominator of the character codes used within that body, with
the exception that not labeling the entity is preferred over labeling the exception that not labeling the entity is preferred over labeling
the entity with the labels US-ASCII or ISO-8859-1. See section 3.7.1 the entity with the labels US-ASCII or ISO-8859-1. See section 3.7.1
and 3.4.1. and 3.4.1.
Additional rules for requirements on parsing and encoding of dates Additional rules for requirements on parsing and encoding of dates
and other potential problems with date encodings include: and other potential problems with date encodings include:
- HTTP/1.1 clients and caches SHOULD assume that an RFC-850 date o HTTP/1.1 clients and caches SHOULD assume that an RFC-850 date
which appears to be more than 50 years in the future is in fact which appears to be more than 50 years in the future is in fact in
in the past (this helps solve the "year 2000" problem). the past (this helps solve the "year 2000" problem).
- An HTTP/1.1 implementation MAY internally represent a parsed o An HTTP/1.1 implementation MAY internally represent a parsed
Expires date as earlier than the proper value, but MUST NOT Expires date as earlier than the proper value, but MUST NOT
internally represent a parsed Expires date as later than the internally represent a parsed Expires date as later than the
proper value. proper value.
- All expiration-related calculations MUST be done in GMT. The o All expiration-related calculations MUST be done in GMT. The
local time zone MUST NOT influence the calculation or comparison local time zone MUST NOT influence the calculation or comparison
of an age or expiration time. of an age or expiration time.
- If an HTTP header incorrectly carries a date value with a time o If an HTTP header incorrectly carries a date value with a time
zone other than GMT, it MUST be converted into GMT using the zone other than GMT, it MUST be converted into GMT using the most
most conservative possible conversion. conservative possible conversion.
19.4 Differences Between HTTP Entities and RFC 2045 Entities A.4. Differences Between HTTP Entities and RFC 2045 Entities
HTTP/1.1 uses many of the constructs defined for Internet Mail (RFC HTTP/1.1 uses many of the constructs defined for Internet Mail (RFC
822 [9]) and the Multipurpose Internet Mail Extensions (MIME [7]) to 822 [RFC822]) and the Multipurpose Internet Mail Extensions (MIME
allow entities to be transmitted in an open variety of [RFC2045]) to allow entities to be transmitted in an open variety of
representations and with extensible mechanisms. However, RFC 2045 representations and with extensible mechanisms. However, RFC 2045
discusses mail, and HTTP has a few features that are different from discusses mail, and HTTP has a few features that are different from
those described in RFC 2045. These differences were carefully chosen those described in RFC 2045. These differences were carefully chosen
to optimize performance over binary connections, to allow greater to optimize performance over binary connections, to allow greater
freedom in the use of new media types, to make date comparisons freedom in the use of new media types, to make date comparisons
easier, and to acknowledge the practice of some early HTTP servers easier, and to acknowledge the practice of some early HTTP servers
and clients. and clients.
This appendix describes specific areas where HTTP differs from RFC This appendix describes specific areas where HTTP differs from RFC
2045. Proxies and gateways to strict MIME environments SHOULD be 2045. Proxies and gateways to strict MIME environments SHOULD be
aware of these differences and provide the appropriate conversions aware of these differences and provide the appropriate conversions
where necessary. Proxies and gateways from MIME environments to HTTP where necessary. Proxies and gateways from MIME environments to HTTP
also need to be aware of the differences because some conversions also need to be aware of the differences because some conversions
might be required. might be required.
19.4.1 MIME-Version A.4.1. MIME-Version
HTTP is not a MIME-compliant protocol. However, HTTP/1.1 messages MAY HTTP is not a MIME-compliant protocol. However, HTTP/1.1 messages
include a single MIME-Version general-header field to indicate what MAY include a single MIME-Version general-header field to indicate
version of the MIME protocol was used to construct the message. Use what version of the MIME protocol was used to construct the message.
of the MIME-Version header field indicates that the message is in Use of the MIME-Version header field indicates that the message is in
full compliance with the MIME protocol (as defined in RFC 2045[7]). full compliance with the MIME protocol (as defined in RFC
Proxies/gateways are responsible for ensuring full compliance (where 2045[RFC2045]). Proxies/gateways are responsible for ensuring full
possible) when exporting HTTP messages to strict MIME environments. compliance (where possible) when exporting HTTP messages to strict
MIME environments.
MIME-Version = "MIME-Version" ":" 1*DIGIT "." 1*DIGIT MIME-Version = "MIME-Version" ":" 1*DIGIT "." 1*DIGIT
MIME version "1.0" is the default for use in HTTP/1.1. However, MIME version "1.0" is the default for use in HTTP/1.1. However,
HTTP/1.1 message parsing and semantics are defined by this document HTTP/1.1 message parsing and semantics are defined by this document
and not the MIME specification. and not the MIME specification.
19.4.2 Conversion to Canonical Form A.4.2. Conversion to Canonical Form
RFC 2045 [7] requires that an Internet mail entity be converted to RFC 2045 [RFC2045] requires that an Internet mail entity be converted
canonical form prior to being transferred, as described in section 4 to canonical form prior to being transferred, as described in section
of RFC 2049 [48]. Section 3.7.1 of this document describes the forms 4 of RFC 2049 [RFC2049]. Section 3.7.1 of this document describes
allowed for subtypes of the "text" media type when transmitted over the forms allowed for subtypes of the "text" media type when
HTTP. RFC 2046 requires that content with a type of "text" represent transmitted over HTTP. RFC 2046 requires that content with a type of
line breaks as CRLF and forbids the use of CR or LF outside of line "text" represent line breaks as CRLF and forbids the use of CR or LF
break sequences. HTTP allows CRLF, bare CR, and bare LF to indicate a outside of line break sequences. HTTP allows CRLF, bare CR, and bare
line break within text content when a message is transmitted over LF to indicate a line break within text content when a message is
HTTP. transmitted over HTTP.
Where it is possible, a proxy or gateway from HTTP to a strict MIME Where it is possible, a proxy or gateway from HTTP to a strict MIME
environment SHOULD translate all line breaks within the text media environment SHOULD translate all line breaks within the text media
types described in section 3.7.1 of this document to the RFC 2049 types described in Section 3.7.1 of this document to the RFC 2049
canonical form of CRLF. Note, however, that this might be complicated canonical form of CRLF. Note, however, that this might be
by the presence of a Content-Encoding and by the fact that HTTP complicated by the presence of a Content-Encoding and by the fact
allows the use of some character sets which do not use octets 13 and that HTTP allows the use of some character sets which do not use
10 to represent CR and LF, as is the case for some multi-byte octets 13 and 10 to represent CR and LF, as is the case for some
character sets. multi-byte character sets.
Implementors should note that conversion will break any cryptographic Implementors should note that conversion will break any cryptographic
checksums applied to the original content unless the original content checksums applied to the original content unless the original content
is already in canonical form. Therefore, the canonical form is is already in canonical form. Therefore, the canonical form is
recommended for any content that uses such checksums in HTTP. recommended for any content that uses such checksums in HTTP.
19.4.3 Conversion of Date Formats A.4.3. Conversion of Date Formats
HTTP/1.1 uses a restricted set of date formats (section 3.3.1) to HTTP/1.1 uses a restricted set of date formats (Section 3.3.1) to
simplify the process of date comparison. Proxies and gateways from simplify the process of date comparison. Proxies and gateways from
other protocols SHOULD ensure that any Date header field present in a other protocols SHOULD ensure that any Date header field present in a
message conforms to one of the HTTP/1.1 formats and rewrite the date message conforms to one of the HTTP/1.1 formats and rewrite the date
if necessary. if necessary.
19.4.4 Introduction of Content-Encoding A.4.4. Introduction of Content-Encoding
RFC 2045 does not include any concept equivalent to HTTP/1.1's RFC 2045 does not include any concept equivalent to HTTP/1.1's
Content-Encoding header field. Since this acts as a modifier on the Content-Encoding header field. Since this acts as a modifier on the
media type, proxies and gateways from HTTP to MIME-compliant media type, proxies and gateways from HTTP to MIME-compliant
protocols MUST either change the value of the Content-Type header protocols MUST either change the value of the Content-Type header
field or decode the entity-body before forwarding the message. (Some field or decode the entity-body before forwarding the message. (Some
experimental applications of Content-Type for Internet mail have used experimental applications of Content-Type for Internet mail have used
a media-type parameter of ";conversions=<content-coding>" to perform a media-type parameter of ";conversions=<content-coding>" to perform
a function equivalent to Content-Encoding. However, this parameter is a function equivalent to Content-Encoding. However, this parameter
not part of RFC 2045.) is not part of RFC 2045).
19.4.5 No Content-Transfer-Encoding A.4.5. No Content-Transfer-Encoding
HTTP does not use the Content-Transfer-Encoding (CTE) field of RFC HTTP does not use the Content-Transfer-Encoding (CTE) field of RFC
2045. Proxies and gateways from MIME-compliant protocols to HTTP MUST 2045. Proxies and gateways from MIME-compliant protocols to HTTP
remove any non-identity CTE ("quoted-printable" or "base64") encoding MUST remove any non-identity CTE ("quoted-printable" or "base64")
prior to delivering the response message to an HTTP client. encoding prior to delivering the response message to an HTTP client.
Proxies and gateways from HTTP to MIME-compliant protocols are Proxies and gateways from HTTP to MIME-compliant protocols are
responsible for ensuring that the message is in the correct format responsible for ensuring that the message is in the correct format
and encoding for safe transport on that protocol, where "safe and encoding for safe transport on that protocol, where "safe
transport" is defined by the limitations of the protocol being used. transport" is defined by the limitations of the protocol being used.
Such a proxy or gateway SHOULD label the data with an appropriate Such a proxy or gateway SHOULD label the data with an appropriate
Content-Transfer-Encoding if doing so will improve the likelihood of Content-Transfer-Encoding if doing so will improve the likelihood of
safe transport over the destination protocol. safe transport over the destination protocol.
19.4.6 Introduction of Transfer-Encoding A.4.6. Introduction of Transfer-Encoding
HTTP/1.1 introduces the Transfer-Encoding header field (section HTTP/1.1 introduces the Transfer-Encoding header field
14.41). Proxies/gateways MUST remove any transfer-coding prior to (Section 14.41). Proxies/gateways MUST remove any transfer-coding
forwarding a message via a MIME-compliant protocol. prior to forwarding a message via a MIME-compliant protocol.
A process for decoding the "chunked" transfer-coding (section 3.6) A process for decoding the "chunked" transfer-coding (Section 3.6)
can be represented in pseudo-code as: can be represented in pseudo-code as:
length := 0 length := 0
read chunk-size, chunk-extension (if any) and CRLF read chunk-size, chunk-extension (if any) and CRLF
while (chunk-size > 0) { while (chunk-size > 0) {
read chunk-data and CRLF read chunk-data and CRLF
append chunk-data to entity-body append chunk-data to entity-body
length := length + chunk-size length := length + chunk-size
read chunk-size and CRLF read chunk-size and CRLF
} }
read entity-header read entity-header
while (entity-header not empty) { while (entity-header not empty) {
append entity-header to existing header fields append entity-header to existing header fields
read entity-header read entity-header
} }
Content-Length := length Content-Length := length
Remove "chunked" from Transfer-Encoding Remove "chunked" from Transfer-Encoding
19.4.7 MHTML and Line Length Limitations A.4.7. MHTML and Line Length Limitations
HTTP implementations which share code with MHTML [45] implementations HTTP implementations which share code with MHTML [RFC2110]
need to be aware of MIME line length limitations. Since HTTP does not implementations need to be aware of MIME line length limitations.
have this limitation, HTTP does not fold long lines. MHTML messages Since HTTP does not have this limitation, HTTP does not fold long
being transported by HTTP follow all conventions of MHTML, including lines. MHTML messages being transported by HTTP follow all
line length limitations and folding, canonicalization, etc., since conventions of MHTML, including line length limitations and folding,
HTTP transports all message-bodies as payload (see section 3.7.2) and canonicalization, etc., since HTTP transports all message-bodies as
does not interpret the content or any MIME header lines that might be payload (see Section 3.7.2) and does not interpret the content or any
contained therein. MIME header lines that might be contained therein.
19.5 Additional Features A.5. Additional Features
RFC 1945 and RFC 2068 document protocol elements used by some RFC 1945 and RFC 2068 document protocol elements used by some
existing HTTP implementations, but not consistently and correctly existing HTTP implementations, but not consistently and correctly
across most HTTP/1.1 applications. Implementors are advised to be across most HTTP/1.1 applications. Implementors are advised to be
aware of these features, but cannot rely upon their presence in, or aware of these features, but cannot rely upon their presence in, or
interoperability with, other HTTP/1.1 applications. Some of these interoperability with, other HTTP/1.1 applications. Some of these
describe proposed experimental features, and some describe features describe proposed experimental features, and some describe features
that experimental deployment found lacking that are now addressed in that experimental deployment found lacking that are now addressed in
the base HTTP/1.1 specification. the base HTTP/1.1 specification.
A number of other headers, such as Content-Disposition and Title, A number of other headers, such as Content-Disposition and Title,
from SMTP and MIME are also often implemented (see RFC 2076 [37]). from SMTP and MIME are also often implemented (see RFC 2076
[RFC2076]).
19.5.1 Content-Disposition A.5.1. Content-Disposition
The Content-Disposition response-header field has been proposed as a The Content-Disposition response-header field has been proposed as a
means for the origin server to suggest a default filename if the user means for the origin server to suggest a default filename if the user
requests that the content is saved to a file. This usage is derived requests that the content is saved to a file. This usage is derived
from the definition of Content-Disposition in RFC 1806 [35]. from the definition of Content-Disposition in RFC 1806 [RFC1806].
content-disposition = "Content-Disposition" ":" content-disposition = "Content-Disposition" ":"
disposition-type *( ";" disposition-parm ) disposition-type *( ";" disposition-parm )
disposition-type = "attachment" | disp-extension-token disposition-type = "attachment" | disp-extension-token
disposition-parm = filename-parm | disp-extension-parm disposition-parm = filename-parm | disp-extension-parm
filename-parm = "filename" "=" quoted-string filename-parm = "filename" "=" quoted-string
disp-extension-token = token disp-extension-token = token
disp-extension-parm = token "=" ( token | quoted-string ) disp-extension-parm = token "=" ( token | quoted-string )
An example is An example is
Content-Disposition: attachment; filename="fname.ext" Content-Disposition: attachment; filename="fname.ext"
The receiving user agent SHOULD NOT respect any directory path The receiving user agent SHOULD NOT respect any directory path
information present in the filename-parm parameter, which is the only information present in the filename-parm parameter, which is the only
parameter believed to apply to HTTP implementations at this time. The parameter believed to apply to HTTP implementations at this time.
filename SHOULD be treated as a terminal component only. The filename SHOULD be treated as a terminal component only.
If this header is used in a response with the application/octet- If this header is used in a response with the application/
stream content-type, the implied suggestion is that the user agent octet-stream content-type, the implied suggestion is that the user
should not display the response, but directly enter a `save response agent should not display the response, but directly enter a `save
as...' dialog. response as...' dialog.
See section 15.5 for Content-Disposition security issues. See Section 15.5 for Content-Disposition security issues.
19.6 Compatibility with Previous Versions A.6. Compatibility with Previous Versions
It is beyond the scope of a protocol specification to mandate It is beyond the scope of a protocol specification to mandate
compliance with previous versions. HTTP/1.1 was deliberately compliance with previous versions. HTTP/1.1 was deliberately
designed, however, to make supporting previous versions easy. It is designed, however, to make supporting previous versions easy. It is
worth noting that, at the time of composing this specification worth noting that, at the time of composing this specification
(1996), we would expect commercial HTTP/1.1 servers to: (1996), we would expect commercial HTTP/1.1 servers to:
- recognize the format of the Request-Line for HTTP/0.9, 1.0, and o recognize the format of the Request-Line for HTTP/0.9, 1.0, and
1.1 requests; 1.1 requests;
- understand any valid request in the format of HTTP/0.9, 1.0, or
o understand any valid request in the format of HTTP/0.9, 1.0, or
1.1; 1.1;
- respond appropriately with a message in the same major version o respond appropriately with a message in the same major version
used by the client. used by the client.
And we would expect HTTP/1.1 clients to: And we would expect HTTP/1.1 clients to:
- recognize the format of the Status-Line for HTTP/1.0 and 1.1 o recognize the format of the Status-Line for HTTP/1.0 and 1.1
responses; responses;
- understand any valid response in the format of HTTP/0.9, 1.0, or o understand any valid response in the format of HTTP/0.9, 1.0, or
1.1. 1.1.
For most implementations of HTTP/1.0, each connection is established For most implementations of HTTP/1.0, each connection is established
by the client prior to the request and closed by the server after by the client prior to the request and closed by the server after
sending the response. Some implementations implement the Keep-Alive sending the response. Some implementations implement the Keep-Alive
version of persistent connections described in section 19.7.1 of RFC version of persistent connections described in Section 19.7.1 of RFC
2068 [33]. 2068 [RFC2068].
19.6.1 Changes from HTTP/1.0 A.6.1. Changes from HTTP/1.0
This section summarizes major differences between versions HTTP/1.0 This section summarizes major differences between versions HTTP/1.0
and HTTP/1.1. and HTTP/1.1.
19.6.1.1 Changes to Simplify Multi-homed Web Servers and Conserve IP A.6.1.1. Changes to Simplify Multi-homed Web Servers and Conserve IP
Addresses Addresses
The requirements that clients and servers support the Host request- The requirements that clients and servers support the Host request-
header, report an error if the Host request-header (section 14.23) is header, report an error if the Host request-header (Section 14.23) is
missing from an HTTP/1.1 request, and accept absolute URIs (section missing from an HTTP/1.1 request, and accept absolute URIs
5.1.2) are among the most important changes defined by this (Section 5.1.2) are among the most important changes defined by this
specification. specification.
Older HTTP/1.0 clients assumed a one-to-one relationship of IP Older HTTP/1.0 clients assumed a one-to-one relationship of IP
addresses and servers; there was no other established mechanism for addresses and servers; there was no other established mechanism for
distinguishing the intended server of a request than the IP address distinguishing the intended server of a request than the IP address
to which that request was directed. The changes outlined above will to which that request was directed. The changes outlined above will
allow the Internet, once older HTTP clients are no longer common, to allow the Internet, once older HTTP clients are no longer common, to
support multiple Web sites from a single IP address, greatly support multiple Web sites from a single IP address, greatly
simplifying large operational Web servers, where allocation of many simplifying large operational Web servers, where allocation of many
IP addresses to a single host has created serious problems. The IP addresses to a single host has created serious problems. The
Internet will also be able to recover the IP addresses that have been Internet will also be able to recover the IP addresses that have been
allocated for the sole purpose of allowing special-purpose domain allocated for the sole purpose of allowing special-purpose domain
names to be used in root-level HTTP URLs. Given the rate of growth of names to be used in root-level HTTP URLs. Given the rate of growth
the Web, and the number of servers already deployed, it is extremely of the Web, and the number of servers already deployed, it is
important that all implementations of HTTP (including updates to extremely important that all implementations of HTTP (including
existing HTTP/1.0 applications) correctly implement these updates to existing HTTP/1.0 applications) correctly implement these
requirements: requirements:
- Both clients and servers MUST support the Host request-header. o Both clients and servers MUST support the Host request-header.
- A client that sends an HTTP/1.1 request MUST send a Host header. o A client that sends an HTTP/1.1 request MUST send a Host header.
- Servers MUST report a 400 (Bad Request) error if an HTTP/1.1 o Servers MUST report a 400 (Bad Request) error if an HTTP/1.1
request does not include a Host request-header. request does not include a Host request-header.
- Servers MUST accept absolute URIs. o Servers MUST accept absolute URIs.
19.6.2 Compatibility with HTTP/1.0 Persistent Connections A.6.2. Compatibility with HTTP/1.0 Persistent Connections
Some clients and servers might wish to be compatible with some Some clients and servers might wish to be compatible with some
previous implementations of persistent connections in HTTP/1.0 previous implementations of persistent connections in HTTP/1.0
clients and servers. Persistent connections in HTTP/1.0 are clients and servers. Persistent connections in HTTP/1.0 are
explicitly negotiated as they are not the default behavior. HTTP/1.0 explicitly negotiated as they are not the default behavior. HTTP/1.0
experimental implementations of persistent connections are faulty, experimental implementations of persistent connections are faulty,
and the new facilities in HTTP/1.1 are designed to rectify these and the new facilities in HTTP/1.1 are designed to rectify these
problems. The problem was that some existing 1.0 clients may be problems. The problem was that some existing 1.0 clients may be
sending Keep-Alive to a proxy server that doesn't understand sending Keep-Alive to a proxy server that doesn't understand
Connection, which would then erroneously forward it to the next Connection, which would then erroneously forward it to the next
skipping to change at page 172, line 39 skipping to change at page 174, line 27
result in a hung HTTP/1.0 proxy waiting for the close on the result in a hung HTTP/1.0 proxy waiting for the close on the
response. The result is that HTTP/1.0 clients must be prevented from response. The result is that HTTP/1.0 clients must be prevented from
using Keep-Alive when talking to proxies. using Keep-Alive when talking to proxies.
However, talking to proxies is the most important use of persistent However, talking to proxies is the most important use of persistent
connections, so that prohibition is clearly unacceptable. Therefore, connections, so that prohibition is clearly unacceptable. Therefore,
we need some other mechanism for indicating a persistent connection we need some other mechanism for indicating a persistent connection
is desired, which is safe to use even when talking to an old proxy is desired, which is safe to use even when talking to an old proxy
that ignores Connection. Persistent connections are the default for that ignores Connection. Persistent connections are the default for
HTTP/1.1 messages; we introduce a new keyword (Connection: close) for HTTP/1.1 messages; we introduce a new keyword (Connection: close) for
declaring non-persistence. See section 14.10. declaring non-persistence. See Section 14.10.
The original HTTP/1.0 form of persistent connections (the Connection: The original HTTP/1.0 form of persistent connections (the Connection:
Keep-Alive and Keep-Alive header) is documented in RFC 2068. [33] Keep-Alive and Keep-Alive header) is documented in RFC 2068.
[RFC2068]
19.6.3 Changes from RFC 2068 A.6.3. Changes from RFC 2068
This specification has been carefully audited to correct and This specification has been carefully audited to correct and
disambiguate key word usage; RFC 2068 had many problems in respect to disambiguate key word usage; RFC 2068 had many problems in respect to
the conventions laid out in RFC 2119 [34]. the conventions laid out in RFC 2119 [RFC2119].
Clarified which error code should be used for inbound server failures Clarified which error code should be used for inbound server failures
(e.g. DNS failures). (Section 10.5.5). (e.g. DNS failures). (Section 10.5.5).
CREATE had a race that required an Etag be sent when a resource is CREATE had a race that required an Etag be sent when a resource is
first created. (Section 10.2.2). first created. (Section 10.2.2).
Content-Base was deleted from the specification: it was not Content-Base was deleted from the specification: it was not
implemented widely, and there is no simple, safe way to introduce it implemented widely, and there is no simple, safe way to introduce it
without a robust extension mechanism. In addition, it is used in a without a robust extension mechanism. In addition, it is used in a
similar, but not identical fashion in MHTML [45]. similar, but not identical fashion in MHTML [RFC2110].
Transfer-coding and message lengths all interact in ways that Transfer-coding and message lengths all interact in ways that
required fixing exactly when chunked encoding is used (to allow for required fixing exactly when chunked encoding is used (to allow for
transfer encoding that may not be self delimiting); it was important transfer encoding that may not be self delimiting); it was important
to straighten out exactly how message lengths are computed. (Sections to straighten out exactly how message lengths are computed.
3.6, 4.4, 7.2.2, 13.5.2, 14.13, 14.16) (Sections 3.6, 4.4, 7.2.2, 13.5.2, 14.13, 14.16)
A content-coding of "identity" was introduced, to solve problems A content-coding of "identity" was introduced, to solve problems
discovered in caching. (section 3.5) discovered in caching. (Section 3.5)
Quality Values of zero should indicate that "I don't want something" Quality Values of zero should indicate that "I don't want something"
to allow clients to refuse a representation. (Section 3.9) to allow clients to refuse a representation. (Section 3.9)
The use and interpretation of HTTP version numbers has been clarified The use and interpretation of HTTP version numbers has been clarified
by RFC 2145. Require proxies to upgrade requests to highest protocol by RFC 2145. Require proxies to upgrade requests to highest protocol
version they support to deal with problems discovered in HTTP/1.0 version they support to deal with problems discovered in HTTP/1.0
implementations (Section 3.1) implementations (Section 3.1)
Charset wildcarding is introduced to avoid explosion of character set Charset wildcarding is introduced to avoid explosion of character set
skipping to change at page 174, line 16 skipping to change at page 175, line 51
status code was needed to resolve this ambiguity needed to indicate status code was needed to resolve this ambiguity needed to indicate
an error for a byte range request that falls outside of the actual an error for a byte range request that falls outside of the actual
contents of a document. (Section 10.4.17, 14.16) contents of a document. (Section 10.4.17, 14.16)
Rewrite of message transmission requirements to make it much harder Rewrite of message transmission requirements to make it much harder
for implementors to get it wrong, as the consequences of errors here for implementors to get it wrong, as the consequences of errors here
can have significant impact on the Internet, and to deal with the can have significant impact on the Internet, and to deal with the
following problems: following problems:
1. Changing "HTTP/1.1 or later" to "HTTP/1.1", in contexts where 1. Changing "HTTP/1.1 or later" to "HTTP/1.1", in contexts where
this was incorrectly placing a requirement on the behavior of this was incorrectly placing a requirement on the behavior of an
an implementation of a future version of HTTP/1.x implementation of a future version of HTTP/1.x
2. Made it clear that user-agents should retry requests, not 2. Made it clear that user-agents should retry requests, not
"clients" in general. "clients" in general.
3. Converted requirements for clients to ignore unexpected 100 3. Converted requirements for clients to ignore unexpected 100
(Continue) responses, and for proxies to forward 100 responses, (Continue) responses, and for proxies to forward 100 responses,
into a general requirement for 1xx responses. into a general requirement for 1xx responses.
4. Modified some TCP-specific language, to make it clearer that 4. Modified some TCP-specific language, to make it clearer that non-
non-TCP transports are possible for HTTP. TCP transports are possible for HTTP.
5. Require that the origin server MUST NOT wait for the request 5. Require that the origin server MUST NOT wait for the request body
body before it sends a required 100 (Continue) response. before it sends a required 100 (Continue) response.
6. Allow, rather than require, a server to omit 100 (Continue) if 6. Allow, rather than require, a server to omit 100 (Continue) if it
it has already seen some of the request body. has already seen some of the request body.
7. Allow servers to defend against denial-of-service attacks and 7. Allow servers to defend against denial-of-service attacks and
broken clients. broken clients.
This change adds the Expect header and 417 status code. The message This change adds the Expect header and 417 status code. The message
transmission requirements fixes are in sections 8.2, 10.4.18, transmission requirements fixes are in sections 8.2, 10.4.18,
8.1.2.2, 13.11, and 14.20. 8.1.2.2, 13.11, and 14.20.
Proxies should be able to add Content-Length when appropriate. Proxies should be able to add Content-Length when appropriate.
(Section 13.5.2) (Section 13.5.2)
skipping to change at page 175, line 11 skipping to change at page 176, line 46
(Section 13.1.2, 13.2.4, 13.5.2, 13.5.3, 14.9.3, and 14.46) Warning (Section 13.1.2, 13.2.4, 13.5.2, 13.5.3, 14.9.3, and 14.46) Warning
also needed to be a general header, as PUT or other methods may have also needed to be a general header, as PUT or other methods may have
need for it in requests. need for it in requests.
Transfer-coding had significant problems, particularly with Transfer-coding had significant problems, particularly with
interactions with chunked encoding. The solution is that transfer- interactions with chunked encoding. The solution is that transfer-
codings become as full fledged as content-codings. This involves codings become as full fledged as content-codings. This involves
adding an IANA registry for transfer-codings (separate from content adding an IANA registry for transfer-codings (separate from content
codings), a new header field (TE) and enabling trailer headers in the codings), a new header field (TE) and enabling trailer headers in the
future. Transfer encoding is a major performance benefit, so it was future. Transfer encoding is a major performance benefit, so it was
worth fixing [39]. TE also solves another, obscure, downward worth fixing [Nie1997]. TE also solves another, obscure, downward
interoperability problem that could have occurred due to interactions interoperability problem that could have occurred due to interactions
between authentication trailers, chunked encoding and HTTP/1.0 between authentication trailers, chunked encoding and HTTP/1.0
clients.(Section 3.6, 3.6.1, and 14.39) clients.(Section 3.6, 3.6.1, and 14.39)
The PATCH, LINK, UNLINK methods were defined but not commonly The PATCH, LINK, UNLINK methods were defined but not commonly
implemented in previous versions of this specification. See RFC 2068 implemented in previous versions of this specification. See RFC 2068
[33]. [RFC2068].
The Alternates, Content-Version, Derived-From, Link, URI, Public and The Alternates, Content-Version, Derived-From, Link, URI, Public and
Content-Base header fields were defined in previous versions of this Content-Base header fields were defined in previous versions of this
specification, but not commonly implemented. See RFC 2068 [33]. specification, but not commonly implemented. See RFC 2068 [RFC2068].
20 Index Appendix B. Index
Please see the PostScript version of this RFC for the INDEX. Please see the PostScript version of this RFC for the INDEX.
21. Full Copyright Statement Index
Copyright (C) The Internet Society (1999). All Rights Reserved. 1
100 Continue (status code) 61
101 Switching Protocols (status code) 61
This document and translations of it may be copied and furnished to 2
others, and derivative works that comment on or otherwise explain it 200 OK (status code) 61
or assist in its implementation may be prepared, copied, published 201 Created (status code) 62
and distributed, in whole or in part, without restriction of any 202 Accepted (status code) 62
kind, provided that the above copyright notice and this paragraph are 203 Non-Authoritative Information (status code) 62
included on all such copies and derivative works. However, this 204 No Content (status code) 63
document itself may not be modified in any way, such as by removing 205 Reset Content (status code) 63
the copyright notice or references to the Internet Society or other 206 Partial Content (status code) 63
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than
English.
The limited permissions granted above are perpetual and will not be 3
revoked by the Internet Society or its successors or assigns. 300 Multiple Choices (status code) 64
301 Moved Permanently (status code) 65
302 Found (status code) 65
303 See Other (status code) 66
304 Not Modified (status code) 66
305 Use Proxy (status code) 67
306 (Unused) (status code) 67
307 Temporary Redirect (status code) 67
This document and the information contained herein is provided on an 4
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING 400 Bad Request (status code) 68
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING 401 Unauthorized (status code) 68
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION 402 Payment Required (status code) 69
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF 403 Forbidden (status code) 69
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 404 Not Found (status code) 69
405 Method Not Allowed (status code) 69
406 Not Acceptable (status code) 69
407 Proxy Authentication Required (status code) 70
408 Request Timeout (status code) 70
409 Conflict (status code) 70
410 Gone (status code) 71
411 Length Required (status code) 71
412 Precondition Failed (status code) 71
413 Request Entity Too Large (status code) 71
414 Request-URI Too Long (status code) 72
415 Unsupported Media Type (status code) 72
416 Requested Range Not Satisfiable (status code) 72
417 Expectation Failed (status code) 72
Acknowledgement 5
500 Internal Server Error (status code) 73
501 Not Implemented (status code) 73
502 Bad Gateway (status code) 73
503 Service Unavailable (status code) 73
504 Gateway Timeout (status code) 73
505 HTTP Version Not Supported (status code) 74
Funding for the RFC Editor function is currently provided by the A
Internet Society. Accept header 102
Accept-Charset header 104
Accept-Encoding header 105
Accept-Language header 106
Accept-Ranges header 108
age 13
Age header 108
Allow header 109
Alternates header 177
application/http Media Type 165
Authorization header 109
C
cache 12
Cache Directives
max-age 115
max-age 116
max-stale 115
min-fresh 115
must-revalidate 117
no-cache 112
no-store 113
no-transform 118
only-if-cached 117
private 112
proxy-revalidate 118
public 112
s-maxage 114
Cache-Control header 110
cacheable 12
client 11
compress 26
CONNECT method 60
connection 10
Connection header 119
content negotiation 11
Content-Base header 177
Content-Disposition header 171
Content-Encoding header 120
Content-Language header 121
Content-Length header 122
Content-Location header 123
Content-MD5 header 123
Content-Range header 125
Content-Type header 127
Content-Version header 177
D
Date header 127
deflate 26
DELETE method 59
Derived-From header 177
downstream 14
E
entity 10
ETag header 128
Expect header 129
Expires header 130
explicit expiration time 13
F
first-hand 12
fresh 13
freshness lifetime 13
From header 131
G
gateway 12
GET method 56
Grammar
Accept 103
Accept-Charset 105
Accept-Encoding 105
accept-extension 103
Accept-Language 106
accept-params 103
Accept-Ranges 108
acceptable-ranges 108
Age 108
age-value 108
Allow 109
ALPHA 18
asctime-date 24
attribute 27
Authorization 109
byte-content-range-spec 125
byte-range-resp-spec 125
byte-range-set 141
byte-range-spec 141
byte-ranges-specifier 141
bytes-unit 33
Cache-Control 111
cache-directive 111
cache-extension 111
cache-request-directive 111
cache-response-directive 111
CHAR 18
charset 25
chunk 28
chunk-data 28
chunk-ext-name 28
chunk-ext-val 28
chunk-extension 28
chunk-size 28
Chunked-Body 28
codings 105
comment 19
Connection 120
connection-token 120
content-coding 26
content-disposition 172
Content-Encoding 121
Content-Language 121
Content-Length 122
Content-Location 123
Content-MD5 123
Content-Range 125
content-range-spec 125
Content-Type 127
CR 18
CRLF 18
ctext 19
CTL 18
Date 127
date1 24
date2 24
date3 24
delta-seconds 24
DIGIT 18
disp-extension-parm 172
disp-extension-token 172
disposition-parm 172
disposition-type 172
entity-body 46
entity-header 46
entity-tag 33
ETag 129
Expect 129
expect-params 129
expectation 129
expectation-extension 129
Expires 130
extension-code 44
extension-header 46
extension-method 39
extension-pragma 139
field-content 35
field-name 35
field-value 35
filename-parm 172
first-byte-pos 141
From 131
general-header 38
generic-message 34
HEX 19
Host 131
HT 18
HTTP-date 24
HTTP-message 34
HTTP-Version 20
http_URL 22
If-Match 132
If-Modified-Since 133
If-None-Match 135
If-Range 136
If-Unmodified-Since 137
instance-length 125
language-range 106
language-tag 32
last-byte-pos 141
last-chunk 28
Last-Modified 137
LF 18
LOALPHA 18
Location 138
LWS 19
Max-Forwards 138
md5-digest 123
media-range 103
media-type 29
message-body 35
message-header 35
Method 39
MIME-Version 169
month 24
OCTET 18
opaque-tag 33
other-range-unit 33
parameter 27
Pragma 139
pragma-directive 139
primary-tag 32
product 31
product-version 31
protocol-name 149
protocol-version 149
Proxy-Authenticate 140
Proxy-Authorization 140
pseudonym 149
qdtext 19
quoted-pair 20
quoted-string 19
qvalue 32
Range 142
range-unit 33
ranges-specifier 141
Reason-Phrase 44
received-by 149
received-protocol 149
Referer 143
Request 38
request-header 42
Request-Line 38
Request-URI 39
Response 42
response-header 45
Retry-After 143
rfc850-date 24
rfc1123-date 24
separators 19
Server 144
SP 18
start-line 34
Status-Code 44
Status-Line 42
subtag 32
subtype 29
suffix-byte-range-spec 141
suffix-length 141
t-codings 144
TE 144
TEXT 19
time 24
token 19
Trailer 146
trailer 28
transfer-coding 27
Transfer-Encoding 146
transfer-extension 27
type 29
UPALPHA 18
Upgrade 147
User-Agent 148
value 27
Vary 148
Via 149
warn-agent 151
warn-code 151
warn-date 151
warn-text 151
Warning 151
warning-value 151
weak 33
weekday 24
wkday 24
WWW-Authenticate 153
gzip 26
H
HEAD method 57
Headers
Accept 102
Accept-Charset 104
Accept-Encoding 105
Accept-Language 106
Accept-Ranges 108
Age 108
Allow 109
Alternate 177
Authorization 109
Cache-Control 110
Connection 119
Content-Base 177
Content-Disposition 171
Content-Encoding 120
Content-Language 121
Content-Length 122
Content-Location 123
Content-MD5 123
Content-Range 125
Content-Type 127
Content-Version 177
Date 127
Derived-From 177
ETag 128
Expect 129
Expires 130
From 131
Host 131
If-Match 132
If-Modified-Since 133
If-None-Match 135
If-Range 136
If-Unmodified-Since 137
Last-Modified 137
Link 177
Location 138
Max-Forwards 138
Pragma 139
Proxy-Authenticate 140
Proxy-Authorization 140
Public 177
Range 140
Referer 143
Retry-After 143
Server 144
TE 144
Trailer 145
Transfer-Encoding 146
Upgrade 146
URI 177
User-Agent 148
Vary 148
Via 149
Warning 150
WWW-Authenticate 153
heuristic expiration time 13
Host header 131
I
identity 26
If-Match header 132
If-Modified-Since header 133
If-None-Match header 135
If-Range header 136
If-Unmodified-Since header 137
inbound 14
L
Last-Modified header 137
Link header 177
LINK method 176
Location header 138
M
max-age
Cache Directive 115
Cache Directive 116
Max-Forwards header 138
max-stale
Cache Directive 115
Media Type
application/http 165
message/http 165
multipart/byteranges 166
multipart/x-byteranges 167
message 10
message/http Media Type 165
Methods
CONNECT 60
DELETE 59
GET 56
HEAD 57
LINK 176
OPTIONS 55
PATCH 176
POST 57
PUT 58
TRACE 59
UNLINK 176
min-fresh
Cache Directive 115
multipart/byteranges Media Type 166
multipart/x-byteranges Media Type 167
must-revalidate
Cache Directive 117
N
no-cache
Cache Directive 112
no-store
Cache Directive 113
no-transform
Cache Directive 118
O
only-if-cached
Cache Directive 117
OPTIONS method 55
origin server 11
outbound 14
P
PATCH method 176
POST method 57
Pragma header 139
private
Cache Directive 112
proxy 11
Proxy-Authenticate header 140
Proxy-Authorization header 140
proxy-revalidate
Cache Directive 118
public
Cache Directive 112
Public header 177
PUT method 58
R
Range header 140
Referer header 143
representation 10
request 10
resource 10
response 10
Retry-After header 143
S
s-maxage
Cache Directive 114
semantically transparent 13
server 11
Server header 144
stale 13
Status Codes
100 Continue 61
101 Switching Protocols 61
200 OK 61
201 Created 62
202 Accepted 62
203 Non-Authoritative Information 62
204 No Content 63
205 Reset Content 63
206 Partial Content 63
300 Multiple Choices 64
301 Moved Permanently 65
302 Found 65
303 See Other 66
304 Not Modified 66
305 Use Proxy 67
306 (Unused) 67
307 Temporary Redirect 67
400 Bad Request 68
401 Unauthorized 68
402 Payment Required 69
403 Forbidden 69
404 Not Found 69
405 Method Not Allowed 69
406 Not Acceptable 69
407 Proxy Authentication Required 70
408 Request Timeout 70
409 Conflict 70
410 Gone 71
411 Length Required 71
412 Precondition Failed 71
413 Request Entity Too Large 71
414 Request-URI Too Long 72
415 Unsupported Media Type 72
416 Requested Range Not Satisfiable 72
417 Expectation Failed 72
500 Internal Server Error 73
501 Not Implemented 73
502 Bad Gateway 73
503 Service Unavailable 73
504 Gateway Timeout 73
505 HTTP Version Not Supported 74
T
TE header 144
TRACE method 59
Trailer header 145
Transfer-Encoding header 146
tunnel 12
U
UNLINK method 176
Upgrade header 146
upstream 14
URI header 177
user agent 11
User-Agent header 148
V
validator 13
variant 11
Vary header 148
Via header 149
W
Warning header 150
WWW-Authenticate header 153
Authors' Addresses
Roy T. Fielding
Department of Information and Computer Science
University of California, Irvine
Irvine, CA 92697-3425
Fax: +1(949)824-1715
Email: fielding@ics.uci.edu
James Gettys
World Wide Web Consortium
MIT Laboratory for Computer Science, NE43-356
545 Technology Square
Cambridge, MA 02139
Fax: +1(617)258-8682
Email: jg@w3.org
Jeffrey C. Mogul
Compaq Computer Corporation
Western Research Laboratory
250 University Avenue
Palo Alto, CA 94305
Email: mogul@wrl.dec.com
Henrik Frystyk Nielsen
World Wide Web Consortium
MIT Laboratory for Computer Science, NE43-356
545 Technology Square
Cambridge, MA 02139
Fax: +1(617)258-8682
Email: frystyk@w3.org
Larry Masinter
Xerox Corporation
MIT Laboratory for Computer Science, NE43-356
3333 Coyote Hill Road
Palo Alto, CA 94034
Email: masinter@parc.xerox.com
Paul J. Leach
Microsoft Corporation
1 Microsoft Way
Redmond, WA 98052
Email: paulle@microsoft.com
Tim Berners-Lee
World Wide Web Consortium
MIT Laboratory for Computer Science, NE43-356
545 Technology Square
Cambridge, MA 02139
Fax: +1(617)258-8682
Email: timbl@w3.org
Full Copyright Statement
Copyright (C) The IETF Trust (1999).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Acknowledgment
Funding for the RFC Editor function is provided by the IETF
Administrative Support Activity (IASA).
 End of changes. 934 change blocks. 
2066 lines changed or deleted 2180 lines changed or added

This html diff was produced by rfcdiff 1.34. The latest version is available from http://tools.ietf.org/tools/rfcdiff/