Skip to content

Tags: goofwear/firmware

Tags

1.20160523

Toggle 1.20160523's commit message
kernel: Rpi 4.4.y: Changes from drm-vc4 next

See: raspberrypi/linux#1463

kernel: Rpi 4.4.y clk driver fixes
See: raspberrypi/linux#1472

kernel: config: Add NF_MATCH_RPFILTER
See: raspberrypi/linux#1483

kernel: rtc: ds1307: ensure that any pending alarm is cleared before a new alarm is enabled
See: raspberrypi/linux#1482

kernel: mmc: Add card_quirks module parameter, log quirks

1.20160506

Toggle 1.20160506's commit message
kernel: Revert "rpi: update vc_vchi_audioserv_defs.h"

See: Hexxeh/rpi-firmware#118

1.20160315

Toggle 1.20160315's commit message
kernel: BCM270X_DT: rpi-display overlay - add swapxy param

See: raspberrypi#564

kernel: Remove I2S config from bt_pins
See: raspberrypi/linux#1321

kernel: bcm2835-sdhost: Workaround for slow sectors
See: raspberrypi/linux@20fe468

firmware: pwm_sdm: first pass at optimisation
See: https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=136445

firmware: arm_loader: Allow frequency cap to go down to 300MHz when over temperature
See: raspberrypi/linux#1337

firmware: dtoverlay: Remove support for space/tab separators
firmware: host_applications: Add dtoverlay app
firmware: dtoverlay: Several small improvements
See: https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=139732

firmware: Add gpioman changes to correctly handle dt-blob.bin for gpio_expander gpios

firmware: Updated dt-blob.dts to include Pi 3
See: https://www.raspberrypi.org/forums/viewtopic.php?f=107&t=140125

1.20160309

Toggle 1.20160309's commit message
firmware: vc_image: Don't mangle the pitch for deinterlace with tall …

…YUV images

See: raspberrypi#520

firmware: spdif: Allow compressed audio flag to be forced
See: raspberrypi#561

kernel: vchiq_arm: Tweak the logging output

kernel: bcm2835-sdhost: Only claim one DMA channel
kernel: bcm2835-mmc: Only claim one DMA channel
See: raspberrypi/linux#1327

kernel: Pi3 DT: Add pull-ups on the UART RX lines

kernel: config: Add module for mcp3422 ADC
See: raspberrypi/linux#1330

kernel: brcmfmac: Disable power management
See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=138312

kernel: serial: Take care starting a hung-up tty's port

1.20160209

Toggle 1.20160209's commit message
kernel: Rebuild with dtb that uses mmc sdcard driver

See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=135645

kernel: Allow up to 24dB digital gain to be applied when using IQAudIO DAC+
See: raspberrypi/linux#1284

kernel: pinctrl-bcm2835: Fix cut-and-paste error in pull parsing
See: raspberrypi/linux@ca312f5

1.20160202

Toggle 1.20160202's commit message
kernel: Bump to 4.1.17

firmware: audioplus: pause burst frames use 32-bits as payload length

firmware: Fix typos in various headers
See: raspberrypi#518

firmware: Video_encode: Support OMX_IndexConfigVideoIntraVOPRefresh
See: raspberrypi#462

firmware: Add support for VC_IMAGE_BGR888/OMX_COLOR_Format24bitRGB888 to video_render

firmware: Rawcam: Add some more debug, and support for RGB888 and BGR888

firmware: bootcode: Remove support for CM msd as it is not believed to be used

firmware: bootcode: Avoid controlling LED gpio on CM

firmware: Add logging for clock management from the videocore. Using vcdbg log msg the logging will include setting of channel and output frequencies

firmware: platform: Add config option to adjust sdram schmoo settings
See: https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=6201&start=975#p892750

firmware: arm_loader: Add mailbox properties to get and set gpio state

firmware: arm_loader: Add Pi0 model string

firmware: platform: Don't default to overscan if we're recovery.elf

1.20151118

Toggle 1.20151118's commit message
arm_loader: Don't overwrite the /soc/ranges DT property

1.20150820

Toggle 1.20150820's commit message
firmware: hdmi: disable dhcp completely to avoid registered i2c user

See: raspberrypi#192

firmware: threadx: Avoid calling a NULL interrupt handler
See: raspberrypi#192

firmware: arm_loader: Load standard touchscreen overlay

firmware: di_adv: Remove dma and copy non interlaced lines from shader

firmware: di_adv: Add vector code for copying top/bottom lines

firmware: di_adv: Do not deinterlace first frame and have one less frame of latency